March 1, 2018 Lit. No. 83679, Rev. 00 Walk-Behind Broadcast Spreader SP-8 & SP-8SS Parts List This document is for SnowEx SP-8 walk behind broadcast spreaders beginning with serial numbers PD-288 and higher, and SP-8SS walk-behind broadcast spreaders beginning with PE-0800 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC
SP-8 & SP-8SS WALK-BEHIND BROADCAST SPREADER PARTS LIST HOPPER COMPONENTS: MODEL SP-8 & SP-8SS 1 2 3 4 6 8 14 11 12 13 9 12 1 7 7 13 16 18 17 Lit. No. 83679, Rev. 00 2 March 1, 2018
SP-8 & SP-8SS WALK-BEHIND BROADCAST SPREADER PARTS LIST SP-8 & SP-8SS Hopper Components Item Part Qty Description Item Part Qty Description 1 D6041 1 Weather Cover 0914 1 Gate Slide 2 D903 1 Screen 11 0913 1 Gate Track 3 D900 1 Hopper 12 094 3 Pivot Bolt SS 4 D93 3 1/4 20 x 1 /8 Hex Cap Screw SS 13 098 7 # 32 Waxed Locknut SS 0969 2 1/4 Flat Washer SS 14 0908 4 # 32 x 1/2 Hex Cap Screw SS 6 D920 1 1/8 Rubber Coated Clamp 1 0943 1 # 32 x 3/4 Knob 7 0970 3 1/4 20 Locknut Waxed SS 16 0944 1.279 x.030 x.3 Spring SS 8 D933 1 Gate Cam 17 0938 1 Gate Adjustment Stop 9 0942 1 Gate Link 18 0939 1 # 32 Weld Nut, Flat SS = Stainless Steel Lit. No. 83679, Rev. 00 3 March 1, 2018
SP-8 & SP-8SS WALK-BEHIND BROADCAST SPREADER PARTS LIST DEFLECTOR ASSEMBLY COMPONENTS: MODEL SP-8 & SP-8SS 2 1 4 6 3 7 8 9 11 2 Lit. No. 83679, Rev. 00 4 March 1, 2018
SP-8 & SP-8SS WALK-BEHIND BROADCAST SPREADER PARTS LIST SP-8 & SP-8SS Deflector Assembly Components Item Part Qty Description Item Part Qty Description 1 D931 1 Material Deflector 7 0970 3 1/4 20 Locknut Waxed SS 2 D932 2 Material Deflector 8 D940 6 3/4 Clamp with 3/8 Hole 3 D91 3 Deflector Support Bracket 9 D209 6 /16 18 x 3/4 Hex Cap Screw SS 4 D93 3 1/4 20 x 1 /8 Hex Cap Screw SS 09 6 3/8 Flat Washer SS D92 6 1/4 x 1 Fender Washer SS 11 0971 4 /16 18 Locknut Waxed SS 6 T1023 3 1/4 Flat Washer, Nylon SS = Stainless Steel Lit. No. 83679, Rev. 00 March 1, 2018
SP-8 WALK-BEHIND BROADCAST SPREADER PARTS LIST AXLE ASSEMBLY COMPONENTS: MODEL SP-8 2 4 1 3 6 7 8 9 11 12 13 14 1 16 17 20 21 18 19 Lit. No. 83679, Rev. 00 6 March 1, 2018
SP-8 WALK-BEHIND BROADCAST SPREADER PARTS LIST SP-8 Axle Assembly Item Part Qty Description Item Part Qty Description 1 1123 1 Hopper Frame 12 88270 1 Axle Spacer 2 88271 1 12 x 3/8 Spinner Shaft, Plastic 13 0934 2 3/16 x 1 1/4 Spring Pin 3 0947 1 /32 x 1 Spring Pin 14 8826 1 Gear Support 4 0963 1 1 1/2 x 0.12 Stir Wire 1 88262 1 Bevel Gear, 1/2 Diameter 88268 3 Lock Ring 16 096 2 3/4 Shaft Collar w/set Screw, Plastic 6 0916 1 3/8 x 8 1/2 Spinner Shaft SS 17 093 4 Wheel Bushing, Nylon 7 88264 2 Gear Cover 18 091 1 3/4 x 24.3 Axle 8 0946 1 /32 x 3/4 Spring Pin 19 0933 1 3/16 x 2 Cotter Pin SS 9 88263 1 Bevel Gear, 1 1/2 Diameter 20 097 1 3/16 x 1 1/2 Cotter Pin SS 88267 1 Spinner Shaft Support 21 0907 2 Wheel 11 0964 2 Grease Fitting Straight 1/8" Drive SS = Stainless Steel Lit. No. 83679, Rev. 00 7 March 1, 2018
SP-8 WALK-BEHIND BROADCAST SPREADER PARTS LIST HANDLE ASSEMBLY COMPONENTS: MODEL SP-8 7 9 3 4 6 2 8 1 11 12 13 14 Lit. No. 83679, Rev. 00 8 March 1, 2018
SP-8 WALK-BEHIND BROADCAST SPREADER PARTS LIST SP-8 Handle Assembly Components Item Part Qty Description Item Part Qty Description 1 0909 1 Frame Stand 8 0971 1 /16 18 Locknut Waxed SS 2 0912 1 Push Spreader Handle 9 0949 2 1/4 20 x 1/2 Hex Cap Screw SS 3 0917 2 7/8 x 1/2 Handle Grip 0970 8 1/4 20 Locknut Waxed SS 4 0937 1 Gate Handle 11 0918 1 Gate Actuator Rod 0940 1 3/16 x 3 1/2 Handle Cover 12 0911 2 1/4 20 x 1 3/8 Hex Cap Screw SS 6 0936 1 Gate Handle Bracket 13 0948 4 1/4 20 x 2 1/4 Hex Cap Screw SS 7 096 1 /16 x 2 1/2 Hex Cap Screw SS 14 093 1 0.08 x 1 1/8 Hairpin Cotter SS SS = Stainless Steel Lit. No. 83679, Rev. 00 9 March 1, 2018
SP-8SS WALK-BEHIND BROADCAST SPREADER PARTS LIST AXLE ASSEMBLY COMPONENTS: MODEL SP-8SS 2 4 1 3 6 7 8 9 11 12 13 14 1 16 17 18 19 20 21 Lit. No. 83679, Rev. 00 March 1, 2018
SP-8SS WALK-BEHIND BROADCAST SPREADER PARTS LIST SP-8SS Axle Assembly Item Part Qty Description Item Part Qty Description 1 T3011 1 Hopper Frame 12 88270 1 Axle Spacer 2 88271 1 12 x 3/8 Spinner Shaft, Plastic 13 0934 2 3/16 x 1 1/4 Spring Pin 3 0947 1 /32 x 1 Spring Pin 14 8826 1 Gear Support 4 0963 1 1 1/2 x 0.12 Stir Wire 1 88262 1 Bevel Gear, 1/2 Diameter 88268 3 Lock Ring 16 096 2 3/4 Shaft Collar w/set Screw, Plastic 6 0916 1 3/8 x 8 1/2 Spinner Shaft SS 17 093 4 Wheel Bushing, Nylon 7 88264 2 Gear Cover 18 091 1 3/4 x 24.3 Axle 8 0946 1 /32 x 3/4 Spring Pin 19 0933 1 3/16 x 2 Cotter Pin SS 9 88263 1 Bevel Gear, 1 1/2 Diameter 20 097 1 3/16 x 1 1/2 Cotter Pin SS 88267 1 Spinner Shaft Support 21 0907 2 Wheel 11 0964 2 Grease Fitting Straight 1/8" Drive SS = Stainless Steel Lit. No. 83679, Rev. 00 11 March 1, 2018
SP-8SS WALK-BEHIND BROADCAST SPREADER PARTS LIST HANDLE ASSEMBLY COMPONENTS: MODEL SP-8SS 7 9 3 2 4 6 8 11 12 13 14 1 Lit. No. 83679, Rev. 00 12 March 1, 2018
SP-8SS WALK-BEHIND BROADCAST SPREADER PARTS LIST SP-8SS Handle Assembly Components Item Part Qty Description Item Part Qty Description 1 T3012 1 Frame Stand 8 0971 1 /16 18 Locknut Waxed SS 2 T013 1 Push Spreader Handle 9 0949 2 1/4 20 x 1/2 Hex Cap Screw SS 3 0917 2 7/8 x 1/2 Handle Grip 0970 8 1/4 20 Locknut Waxed SS 4 0937 1 Gate Handle 11 0918 1 Gate Actuator Rod 0940 1 3/16 x 3 1/2 Handle Cover 12 0911 2 1/4 20 x 1 3/8 Hex Cap Screw SS 6 0936 1 Gate Handle Bracket 13 0948 4 1/4 20 x 2 1/4 Hex Cap Screw SS 7 096 1 /16 x 2 1/2 Hex Cap Screw SS 14 093 1 0.08 x 1 1/8 Hairpin Cotter SS SS = Stainless Steel Lit. No. 83679, Rev. 00 13 March 1, 2018
TrynEx International 31 Ajax Drive Madison Heights, MI 48071 2429 www.snowexproducts.com A DIVISION OF DOUGLAS DYNAMICS, LLC Copyright 2018 Douglas Dynamics, LLC. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of TrynEx International, LLC. Authorization to photocopy items for internal or personal use by TrynEx International outlets or spreader owner is granted. TrynEx International reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifications used. TrynEx International may require or recommend optional equipment for spreaders. TrynEx International offers a limited warranty for all spreaders and accessories. See separately printed page for this important information. The following is a registered ( ) trademark of Douglas Dynamics, LLC: SnowEx. Printed in U.S.A. Lit. No. 83679, Rev. 00 March 1, 2018