DTS LIER FITTIGS - EVD FLUORESET FITTIG - ZOES 21 & 22 83 EVD Fluorescent fitting - zones 21 & 22 Features Double central locking for ingress protection ll components mounted on hinged and removable gear tray which gives easy access for maintenance Including accessories (cable gland, plugs & fixing brackets) EVD Linear fluorescent fitting pprovals & certifications Extb III D GROUP II ZOE 21 ZOE 22 IP 66 IK 10 Specifications Main body constructed of glass-reinforced polyester for high impact strength UV protected polycarbonate diffuser to resist harsh environments Rated voltage 108-4V/Vdc 50-60Hz Wiring configuration: 5 wires 3x entries M20 Emergency version with self- test (type: EM version 3h battery duration) pproved to: TEX Directive (2014/34/EU) EM Directive (2014/30/EU) Low voltage Directive (2014/35/EU) Standards E 60079-0: General requirements E 60079-31: Enclosure t LIE 11 TEX 3092X IE Ex LI 11.0064X II 2 D Ex tb III T85 Db for -40 to +60 Ex tb III T65 Db for -40 to +35 E 55015: onducted emission test and radiated emission test E 61547: EM immunity E 61000-3-2: Harmonic current Emissions lass E 61000-3-3: Limitation of voltage changes and flickers E 60598-1: Luminaire general requirements and tests, including dielectric strength and isolation resistance Glow wire test: 960o 01 Hinged & removable gear tray Operating temperature: IP test: -20 to +55o EVD, -10 to +50o EVD EM IE 60529: IP66 02 Double central locking Impact protection index: IE 62262: IK10 01 02
84 DTS LIGHT FITTIGS, OXES & USTOM UILT OTROL PELS FOR EXPLOSIVE TMOSPHERES EVD fluorescent fitting - zones 21 & 22 EVD Linear fluorescent fitting 5 wires Glass Diffuser Suitable for use in Zones 21 & 22 Dimensions 2 x M8 hole 20mm depth 137 mm EVD 5 wires: Equipped with 1 cable gland & 2 plugs 170 mm Type For Dimensions mm Wiring Light urrent non armored cable armored cable onfiguration Rating W @ 230V EVD120-00J0 EVD120-D0J0 5 wires* 1 x 18 0.09 785 432 400 4.40 EVD140-00J0 EVD140-D0J0 5 wires* 1 x 36 0.18 1370 900 700 7.60 EVD165-00J0 EVD165-D0J0 5 wires* 1 x 58 0.26 1670 900 700 8.80 EVD220-00J0 EVD220-D0J0 5 wires* 2 x 18 0.17 785 432 400 4.40 EVD240-00J0 EVD240-D0J0 5 wires* 2 x 36 0.33 1370 900 700 7.60 EVD265-00J0 EVD265-D0J0 5 wires* 2 x 58 0.48 1670 900 700 8.80 Weight kg EVD 5 wires through: Equipped with 2 cable glands & 1 plug EVD120-0J0 EVD120-E0J0 5 wires through** 1 x 18 0.09 785 432 400 4.40 EVD140-0J0 EVD140-E0J0 5 wires through** 1 x 36 0.48 1370 900 700 7.60 EVD165-0J0 EVD165-E0J0 5 wires through** 1 x 58 0.26 1670 900 700 8.80 EVD220-0J0 EVD220-E0J0 5 wires through** 2 x 18 0.17 785 432 400 4.40 EVD240-0J0 EVD240-E0J0 5 wires through** 2 x 36 0.33 1370 900 700 7.60 EVD265-0J0 EVD265-E0J0 5 wires through** 2 x 58 0.48 1670 900 700 8.80 ote. * For armored cable with 1 continuity plate. ** For armored cable with 2 continuity plates. Technical information Lamps Fluorescent Lamp (order separately) T8 bi-pin tube, lampholder G13, diameter 26mm - white industry 4000 K Photometric curve See page 182 Rated voltages Electronic ballast: 108-4Vac/Vdc 50/60Hz. EOL (End of life) the ballast prevents the lamp cap at the end of lamp life cycle from overheating Power factor 0.98 Wiring onfiguration Electrical protection class Grounding system Terminal block (screws) 5 wires TS, T, TT, IT neutral system 2.5mm² rigid or flexible Terminals supplied L1, L2, L3,, PE (looping possible with one additional cable gland) I Technical information able entries For non-armoured cable: For armoured cable: Housing Fixing (included with product) Three entries M20 Included two M20 nylon plugs (EX-M20) and one M20 nylon cable gland, diameter 6-12mm (EXGM20S) and three nylon locknuts included continuity plate - two M20 nylon plugs (EX-M20) and one M20 nickel plated brass cable gland, diameter 6-12/ 8.5-16mm (EX04MM1K) Glass reinforced polyester housing for high impact strength, UV protected polycarbonate diffuser to resist harsh environments, Painted steel gear tray & Stainless steel 316L insert V015-2x Two zinc-plated steel brackets for ceiling mounting
DTS LIER FITTIGS - EVD EM EMERGEY FLUORESET FITTIG - ZOES 21 & 22 85 EVD EM Emergency fluorescent fitting with self-test - 3h - zones 21 & 22 Dimensions 2 x M8 hole 20mm depth 5 wires: Equipped with 1 cable gland & 2 plugs 137 mm 170 mm Type For Dimensions mm Wiring Light attery urrent non armored cable armored cable onfiguration Rating W h @ 230V EVD120EM-00J0 EVD120EM-D0J0 5 wires* 1 x 18 3h 0.09 785 432 400 5.80 EVD140EM-00J0 EVD140EM-D0J0 5 wires* 1 x 36 3h 0.18 1370 900 700 9.00 EVD165EM-00J0 EVD165EM-D0J0 5 wires* 1 x 58 3h 0.26 1670 900 700 10.60 EVD220EM-00J0 EVD220EM-D0J0 5 wires* 2 x 18 3h 0.17 785 432 400 5.80 EVD240EM-00J0 EVD240EM-D0J0 5 wires* 2 x 36 3h 0.33 1370 900 700 9.00 EVD265EM-00J0 EVD265EM-D0J0 5 wires* 2 x 58 3h 0.48 1670 900 700 10.60 ote. * For armored cable with 1 continuity plate. Weight kg Electrical Features Lamps Fluorescent Lamp (order separately) T8 bi-pin tube, lampholder G13, diameter 26mm - white industry 4000 K Photometric curve See page 182 attery attery id 6V 4h for EVD120, EVD220 attery id 6V losed 7h loop for option EVD140, EVD240, EVD165, EVD265 Lumen output in emergency mode (1 lamp lit) 3 hours: 24% for sevd120, EVD220 3 hours: 18% for EVD140, EVD240 3 hours: 14% for EVD165, EVD265 Emergency function diagrams Monitored by LED Electrical Features Dielectrical class Terminal block Rated voltages Electronic ballast: 108-4Vac or dc 50/60Hz. EOL (End of life) the ballast prevents the lamp cap at the end of lamp life cycle from overheating able entries For non-armoured cable: Power factor 0.98 Wiring onfiguration EVS EM terminals wiring diagram 5 wires For armoured cable: Housing E Ls Ls L1 L1 L2 L3 E Fixing (included with product) Terminal blocks up to 4mm² (rigid wire), 2.5mm² (flexible wire) Terminals supplied L1, L2, L3, LS,, PE, S (looping possible with one additional cable gland) Three entries M20 included two M20 nylon plugs (EX-M20) and one M20 nylon cable gland, diameter 6-12mm (EXGM20S) and three nylon locknuts included continuity plate - two M20 nylon plugs (EX-M20) and one M20 nickel plated brass cable gland, diameter 6-12/ 8.5-16mm (EX04MM1K) Glass reinforced polyester housing for high impact strength, UV protected polycarbonate diffuser to resist harsh environments, Painted steel gear tray & Stainless steel 316L insert V015-2x Two zinc-plated steel brackets for ceiling mounting I Wiring provided by DTS Maintained Mode Mains Supply Tube attery s Ls L1 L O Lit harging OFF Switched option Only emergency tube lit Discharging E s s Ls Ls L1 L1 L2 L3 E Switch between L/2 on Maintained Mode * Mains Supply Tube attery O OFF harging OFF Switched option Only emergency tube lit Discharging 1 0 * This table corresponds to the position 0 open. If the switch is on position 1 close, refer to the table on the left attery charge - 4 months attery charge capacity during 3hr - quarterly lear system test display by LED Ls Ls L1 L1 L2 L3 E attery charge monitoring with LED - Mains O Green LED lit Operating on Mains Power. attery Fully harged. Green LED atteries are charging LED Red LED alternatively green and red Fault (replace (2s) attery battery) test in progress Yellow LED attery Test Fault Red LED lit Emergency mode Mains OFF Red LED attery discharged
86 DTS LIGHT FITTIGS, OXES & USTOM UILT OTROL PELS FOR EXPLOSIVE TMOSPHERES - accessories EVD - zones 21 & 22 ipin T8 fluorescent lamps Type Power W Lumen output lm Lampholder TL18W 18 10 G13 TL36W 36 3350 G13 TL58W 58 5200 G13 Specifications G13 - ø 26mm olour temperature: White industry 4000 K RI: > 80 lm/w: 65 to 93 verage operating life: 12000 hours Fixing accessories* rackets Type Specifications V015 2 x pair of zinc plated steel for ceiling mounting (Included with product) ø9 V016 Stainless steel 316L brackets for ceiling mounting 160 200 Hook Type Specifications 20 V024 2x Zinc plated steel suspension hook M Mounting bracket clip Type Specifications V014 2x Rapid ceiling mounting with stainless steel clip 60, 2 Ø 8.5 Fixing bracket and flange Type Specifications V018 2x zinc plated steel pole mounted brackets for ø1 ¼ & 1 ½ 100 M8 V019 2x zinc plated steel pole mounted brackets for ø2 V021 2x Stainless steel 316L pole mounted brackets for ø1 ¼ & 1 ½ V022 2x Stainless steel 316L pole mounted brackets ø2 α ø9 ~70 41 * Screws and locknuts supplied
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SUF IDITIO OTRIRE: LES OTES SOT E MILLIMETRES ETT DE SURFE: TOLERES: LIEIRES: GULIRES: UTEUR VERIF. PPR. F. QUL. OM FIITIO: SIGTURE DTE MTERIU: MSSE: SSER LES GLES VIFS TITRE: o. DE PL EHELLE:1:5 E PS HGER L'EHELLE REVISIO FEUILLE 1 SUR 1 0 D E F G H J K L M P Q DTS LIER FITTIGS - EVD FLUORESET FITTIG - ZOES 21 & 22 87 - spare parts EVD - zones 21 & 22 Spare parts Type Specifications V004 V001 V008 V00120W V00140W V00165W V0041X20WE V0041X40WE V0041X65WE V0042X20WE V0042X40WE V0042X65WE V0041X20WEM EVD 140-240 (toutes config.) V0041X40WEM V0041X65WEM V0042X20WEM V0042X40WEM V0042X65WEM V008 20W diffuser with gasket for EV. range 40W diffuser with gasket for EV. range 65W diffuser with gasket for EV. range Gear tray 1x18W with electronic ballast 108-4V 50-60Hz for EVD120 Gear tray 1X36W with electronic ballast 108-4V 50-60Hz for EVD140 Gear tray 1X58W with electronic ballast 220-240V 50-60Hz for EVD165 Gear tray 2X18W with electronic ballast 108-4V 50-60Hz for EVD220 Gear tray 2x36W with electronic ballast 108-4V 50-60Hz for EVD240 Gear tray 2x58W with electronic ballast 220-240V 50-60Hz for EVD265 Emergency gear tray 1x18W with electronic ballast 108-4V 50-60Hz for EVD120EM Emergency gear tray 1x36W with electronic ballast 108-4V 50-60Hz for EVD140EM Emergency gear tray 1x58W with electronic ballast 220-240V 50-60Hz for EVD165EM Emergency gear tray 2x18W with electronic ballast 108-4V 50-60Hz for EVD220EM Emergency gear tray 2x36W with electronic ballast 108-4V 50-60Hz for EVD240EM Emergency gear tray 2x58W with electronic ballast 220-240V 50-60Hz for EVD265EM i-pin G13 lampholder V020x40W rass continuity plate for EV. 120, EV. 220, EV. 140, EV. 240 V065W rass continuity plate for EV. 165, EV. 265 EXGM20S EX04MM1K M20 Exe II nylon cable gland for non armoured cable diameter 6-12mm, locknut available separately as LP/M20 Kit M20 Ex-d II Ex-e II Ex-td double compression nickel plated cable gland for armoured cable diameter inner 6-12 outer 8.5-16mm locknut, sealing gasket