Price quote for: Skid Steers Vendor Name: L & L Rentals Inc. Contact Person: Kyle Lind/ Cliff Lind Street Address: 11461 Spudville Road P.O. Box: City, State, Zip Hibbing, MN 55746 Phone #: 218-262-5232 Toll Free #: Fax #: 218-263-9734 Email Address: kyle@landlrentalsinc.com, cliff@landlrentalsinc.com Version of Excel used: 1706 Build 8229.2086 Spec # Information Requested Answer 1.0 MAKE AND MODEL SW21 (Vertical Lift) Engine Type and SAE net HP Tier Length w/o attachments Height with operator cab Ground clearance Maximum height to bucket hinge pin Breakout force Reach at maximum height Dump angle at maximum height Dump height with standard bucket Front clearance circle with standard bucket Rear clearance circle Tipping load - SAE rated Rated operating capacity - SAE Standard bucket capacity - SAE heaped rating Operating weight - SAE rated Travel speed Fuel tank capacity Cold weather starting assist Battery CCA Alternator size - amps Transmission type Tire / Track size / width Final drive chains and drive method Final drive chain adjustment / maintenance Gauges / instrumentation Kohler KDI 2504 w/ DOC 74HP Tier 4 Final 106.6 in 81.5 in 7.6 in 124 in 5300 lbf 34.1 in 42 degrees 96.5 in 84.1 in 61.9 in 4200 lbs. 2100 lbs..47 CYD 6512 lbs. 8 mph (One Speed)/ 12 mph (Two Speed) 30 US gal Glow Plugs 950 cca 100A Hydrostatic Camso 10" x 16.5" All-Terrain 65.9 in #100 ASME/ANSI Heavy Series Roller Chain, Single Strand Continuous; Bowtie chain drive system 500 hours Gauges- Fuel Level, Engine Coolant Temp., Engine Oil Pressure Hour meter, Hydraulic Oil Temperature, Engine Speed, Hours to Next Maintenance Indicators- Engine Oil Pressure fault, Coolant Over-Temp, Low Battery Charge, Hydraulic Oil Filter restriction, Hydraulic over temperature, Air Filter Restriction" Pump type - GPM and PSI Control valves Hydraulic oil cooler Danfoss Tandem Hydrostatic Axial Piston- 20 gpm/3500 psi Electrically Proportional for working and auxiliary functions Included air to oil
Spec # Information Requested Answer Drive controls Lift and tilt controls Engine speed control Work lights - front Work lights - rear Warranty Mechanical Hand-Foot Controls Mechanical Hand-Foot Controls Mechanical Hand Controls Included 2 single beam working lights Included 2 single beam working lights 3 year 3000 hour full/ 4 year 4000 hour powertrain/ 5 year 5000 hour electrical system BASE UNIT PRICE: $ 33,204.00
OEM OPTIONS AND ATTACHMENTS 1.0 Price for base unit: $ 33,204.00 2.0 Skid Steer Options: Use this section to offer additional skid steer options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for skid steer power unit and not attachments. 2.1 Package SP410M: Standard Features Plus: Two-Speed Drive, Hydraulic Coupler, Variable Speed Fan, Hydraulic Bucket Leveling, Mechanical Suspension Seat, Dual Armrest, Ride Control $ 3,604.00 2.2 Package SP411M: Standard Features Plus: Enclosed ROPS Cab w/ HVAC, Two-Speed Drive, Hydraulic Coupler, Variable Speed Fan, Hydraulic Bucket Leveling, Mechanical Suspension Seat, Dual Armrest, Ride Control $ 7,259.00 2.3 Package SP410E: Standard Features Plus: Selectable EH Controls, Two-Speed Drive, Hydraulic Coupler, Variable Speed Fan, Hydraulic Bucket Leveling, Mechanical Suspension Seat, Ride Control $ 5,372.00 2.4 Package SP411E: Standard Features Plus: Enclosed ROPS Cab w/ HVAC, Selectable EH Controls, Two- Speed Drive, Hydraulic Coupler, Variable Speed Fan, Hydraulic bucket Leveling, Mechanical Suspension Seat, Ride Control $ 9,027.00 2.5 Package SP411F: Standard Features Plus: Enclosed ROPS Cab w/ HVAC, Mechanical Coupler, EH Controls, Two-Speed Drive, Variable Speed Fan, Hydraulic Bucket Leveling, Mechanical Suspension Seat, Ride Control, Counter Weights, 10x16.5 Severe Duty Tires, Diamond Coating $ 11,781.00 2.6 Open ROPS Canopy no charge 2.7 Cab Type- Enclosed- Heat Only $ 2,975.00 2.8 Cab Type- Enclosed- Heat, A/C $ 3,655.00 2.9 Polycarbonate Door $ 1,785.00 2.10 Mechanical Hand-Foot Controls no charge 2.11 Selectable EH Joystick Controls (ISO/H-Pattern) $ 1,870.00 Note Mechanical Suspension Seat (ST01) or Air-Ride Seat (ST03) required for EH Controls 2.12 Mechanical Coupler no charge 2.13 Hydraulic Coupler $ 480.25 2.14 10x16.5 Standard no charge 2.15 10x16.5 Premium $ 127.50 2.16 10x16.5 Severe Duty $ 340.00 2.17 10x16.5 Solid $ 1,020.00 2.18 12x16.5 Standard $ 148.75 2.19 12x16.5 Premium $ 361.25 2.20 Variable Speed Cooling Fan $ 212.50 2.21 Mechanical Suspension Seat $ 140.25 2.22 Air-Ride Seat $ 335.75 2.23 Heated Air-Ride Seat $ 467.50 2.24 3" Seat Belt $ 127.50 2.25 Deluxe Display (5.7" color screen) $ 680.00 2.26 Two-Speed Drive- 8.0 mph/12.0 mph (12.9/19.3 kph) $ 1,360.00 2.27 Cyclonic Engine Pre-Cleaner $ 233.75 2.28 14-Pin Attachment Control $ 361.25 2.29 One-Way Hydraulic Bucket Leveling $ 437.75 2.30 Block Heater (110v) $ 106.25 2.31 Ride Control $ 926.50 2.32 Counterweights 340 lbs. (2 on each side) $ 374.00 2.33 Dual Beam Work Lights $ 106.25 2.34 Radio $ 365.50 2.35 Back-up Camera *(Requires Deluxe Display) $ 680.00 2.36 Strobe Beacon $ 212.50 2.37 Zero-Drift Hydraulic Valve $ 191.25 2.38 Battery Disconnect $ 34.00 2.39 Dual Armrest (For Mechanical H-F machines only) $ 102.00 2.40 Foot Throttle (For EH controls only) $ 127.50 2.41 Deluxe Telematics *(Requires Subscription) $ 297.50 2.42 Synthetic Hydraulic Oil (Recommended for Cold Start Applications) $ 85.00 2.43 Diamond Coating (anti-corrosive) $ 2,775.25 2.44 Cold Start Bundle: Block Heater, Synthetic Hydraulic Oil $ 191.25 2.45 Winter Performance Bundle: Block Heater, 14-Pin Attachment, Dual Beam Work Lights, Strobe Beacon, Synthetic Hydraulic Oil $ 871.25 2.46 High Flow Kit (30 gpm) $ 765.00 2.47 Rear Light Guarding Kit $ 123.25 2.48 Fire Extinguisher Kit $ 97.75 2.49 Hazard Lights Kit $ 510.00 2.50 Single Point Lift Kit $ 1,700.00 2.51 Rear Receiver $ 187.00 2.52 Level II FOPS Kit $ 2,125.00 3.0 Bucket Options: Use this section to offer bucket options such as standard, snow or combination buckets, etc.. 3.1 Low Profile SSL CTL Bucket- 68" $ 1,031.90 3.2 Low Profile SSL CTL Bucket- 75" $ 1,207.00 3.3 Long Floor Low Profile SSL CTL Bucket- 68" $ 1,123.70 3.4 Long Floor Low Profile SSL CTL Bucket- 75" $ 1,280.95 3.5 High-Capacity SSL CTL Bucket- 68" $ 1,224.00 3.7 WB Light Material Bucket- 66" $ 1,734.00
3.8 WB Light Material Bucket Bolt on Cutting Edge- 66" $ 399.50 3.9 BOE (cutting edge) 68" $ 316.20 3.10 BOE (cutting edge) 75" $ 317.05 3.11 Bolt on Tooth Assembly (Individual Tooth) $ 38.25 3.12 Bolt on Side Cutters (Sold in pairs) $ 61.20 3.13 Bolt on Spill Guard- 68" High-Capacity $ 195.50 3.14 Rock Bucket- 66" 2" Tine $ 1,887.00 3.15 Rock Bucket- 66" 3" Tine $ 1,708.50 3.16 Tree Scoop Bucket- 36" $ 760.75 3.17 Tree Scoop Bucket- 42" $ 858.50 3.18 Tree Scoop Bucket- 48" $ 1,049.75 3.19 Snow Bucket- 84" $ 1,547.00 3.20 Snow Bucket- 96" $ 1,695.75 4.0 Overtire tracks: Use this section to offer overtire tracks. 4.1 4.2 5.0 Pallet forks: Use this section to offer fork options, such as pallet forks, bale handler, etc.. 5.1 Pallet Forks: 5500lb (1814kg) @50%- 42" Tines (Includes Frame and Tines) $ 966.45 5.2 Pallet Forks: 5500lb (1814kg) @50%- 48" Tines (Includes Frame and Tines) $ 1,038.70 5.3 Pallet Forks: 6000lb (2721kg) @50%- 42" Tines (Includes Frame and Tines) $ 1,204.45 5.4 Pallet Forks: 6000lb (2721kg) @50%- 48" Tines (Includes Frame and Tines) $ 1,374.45 6.0 Adaptor plate: Use this section to offer adaptor plate options. 6.1 6.2 7.0 Snowblower: Use this section to offer snowblower options. Note: Pronovost Snow Blowers require option 2.46 7.1 Pronovost Snow Blower, P740 74" HD HF (Coupler included) (Requires Option 2.46) $ 10,442.25 7.2 Pronovost Snow Blower, P720-80, 84" HD HF (Coupler included) (Requires Option 2.46) $ 11,377.25 8.0 Sweeper: Use this section to offer sweeper options. Note: For units with an 8 pin connection, either a Universal Controller or a 8 to 14 Pin Adapter is needed 8.1 Angle Broom- 72" $ 6,094.50 8.2 Angle Broom- 84" $ 6,451.50 8.3 Kit- Sprinkler, 12v, 24 gal $ 990.25 8.4 Universal Controller, 8 pin $ 150.45 8.5 Wire harness, 8 to 14 pin adapter $ 138.55 Note: For units with an 8 pin connection, either a Universal Controller or a 8 to 14 Pin Adapter is needed 8.6 Heavy-Duty VRS Pick-Up Broom, 72" $ 5,962.75 8.7 Heavy-Duty VRS Pick-Up Broom, 84" $ 6,927.50 8.8 Kit- Gutter Brush Assembly, Poly $ 1,258.00 8.9 Kit- Gutter Brush Assembly, Wire $ 1,258.00 8.10 Kit- Sprinkler, 12v, 24 gal $ 990.25 8.11 Universal Controller, 8 pin $ 150.45 8.12 Wire harness, 8 to 14 pin adapter $ 138.55 9.0 Backhoe: Use this section to offer backhoe options. 9.1 9.2 10.0 Planer: Use this section to offer planer options. 10.1 10.2 11.0 Snow Plow: Use this section to offer snow plow options. 11.1 Low Profile Snow Push- 72" $ 2,422.50 11.2 Low Profile Snow Push 84" $ 2,499.00 11.3 Low Profile Snow Push- 96" $ 2,765.05 11.4 Low Profile Snow Push- 120" $ 3,099.10 11.5 Hydraulic Snow Angle Blade- 72" $ 2,777.80 11.6 Hydraulic Snow Angle Blade- 84" $ 2,890.00 11.7 Hydraulic Snow V Blade w/ Trip Edge- 84" $ 4,527.10 11.8 Hydraulic Snow V Blade w/ Trip Edge- 96" $ 4,641.85 12.0 Hydraulic breaker: Use this section to offer hydraulic breaker options. 12.1 12.2 13.0 Grapple: Use this section to offer grapple options. 13.1 13.2 14.0 Landscape:
Use this section to offer landscape options. 14.1 Roto Tiller- 52" w/ hoses and couplers $ 4,139.50 14.2 XR 21 Trencher (36x6, 1/2 Rock & Frost Teeth) w/ hoses $ 4,658.00 14.3 Ground Shark Brush Cutters- 72" Standard Brush Cutter $ 5,656.75 14.4 Ground Shark Brush Cutter- 78" Standard Brush Cutter $ 6,409.00 14.5 Kit- Ground Shark Brush Cutter: Gauge, Sight Indicator $ 242.25 14.6 Kit- Ground Shark Brush Cutter: Dual Wheel, Standard Brush Cutters $ 709.75 14.7 Kit- Ground Shark Brush Cutter: Replacement Blade Set (60in standard brush cutters) $ 255.00 14.8 Kit- Ground Shark Brush Cutter: Replacement Blade Set (72in standard brush cutters) $ 272.00 14.9 Kit- Ground Shark Brush Cutter: Replacement Blade Set (78in standard brush cutters) $ 314.50 14.10 Kit- Ground Shark Brush Cutter: Wear Shoe, Pair (standard brush cutters) $ 63.75 14.11 Ground Shark Brush Cutter- 78" Standard Brush Cutter, High Flow (Requires Option 2.46) $ 6,948.75 14.12 Ground Shark Brush Cutter- 72" Extreme Duty Brush Cutter, High Flow (Requires Option 2.46) $ 10,480.50 14.13 Kit- Replacement Blade Set, 72" Extreme Duty Brush Cutter $ 1,020.00 14.14 Kit- Wear Plate, 72" Extreme Duty Brush Cutter $ 174.25 14.15 Kit- Carbide Tooth, 18 Teeth, 72" Extreme Duty Brush Cutter $ 352.75 Note: For units with an 8 pin connection, either a Universal Controller or a 8 to 14 Pin Adapter is needed 14.16 FFC Power Box Rake, 72", with controller $ 7,616.00 14.17 Universal Controller, 8 pin $ 150.45 14.18 Wire harness, 8 to 14 pin adapter $ 138.55 15.0 Grader: Use this section to offer grader options. 15.1 15.2 16.0 Auger: Use this section to offer auger options. 16.1 2" Auger Drive (A-220 H Auger Drive, Drive Mounting Adapter and Hose Kit) $ 2,256.75 16.2 Standard 6" Auger Bit, 50" Length, 2" Hex Drive Shaft, 2 Standard Teeth (Requires 16.1) $ 182.75 16.3 Standard 9" Auger Bit, 50" Length, 2" Hex Drive Shaft, 4 Standard Teeth (Requires 16.1) $ 280.50 16.4 Standard 12" Auger Bit, 50" Length, 2" Hex Drive Shaft, 4 Standard Teeth (Requires 16.1) $ 301.75 16.5 Standard 15" Auger Bit, 50" Length, 2" Hex Drive Shaft, 5 Standard Teeth (Requires 16.1) $ 395.25 16.6 Standard 18" Auger Bit, 50" Length, 2" Hex Drive Shaft, 6 Standard Teeth (Requires 16.1) $ 442.00 16.7 Standard 20" Auger Bit, 50" Length, 2" Hex Drive Shaft, 7 Standard Teeth (Requires 16.1) $ 480.25 16.8 Standard 24" Auger Bit, 50" Length, 2" Hex Drive Shaft, 9 Standard Teeth (Requires 16.1) $ 501.50 16.9 Standard 30" Auger Bit, 50" Length, 2" Hex Drive Shaft, 11 Standard Teeth (Requires 16.1) $ 671.50 16.10 Standard 36" Auger Bit, 50" Length, 2" Hex Drive Shaft, 13 Standard Teeth (Requires 16.1) $ 837.25
17.0 Wheel saw: Use this section to offer wheel saw options. 17.1 17.2 18.0 Vibratory roller: Use this section to offer vibratory roller options. 18.1 18.2 19.0 Other: Use this section to offer any other option not already covered. 19.1 48" Round Bale Spear, 1 main spear and 2 stabilizers $ 518.50 19.2 48" Square Bales Spear, 1 main spear and 3 stabilizers $ 595.00 5.5 Utility Forks, 60", 9 teeth $ 943.50 20.0 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 20.1, 20.2, 20.3, etc. (Specify years, miles or hours extended term covers.) 20.1 20.2 21.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance Charges are applicable for the actual rental term only. State the actual interest rate here: 22.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM (See Solicitation Special Terms and Conditions.) DEDUCT cost per Used Hour from the original Contract Price $ 23.0 DELIVERY STARTING POINT - City, State, Zip Hibbing, MN 55746 (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $3.25 24.0 INSTALLATION - PER HOUR (Hourly Shop Rate): Installation services may be requested on an "as needed" basis - see special terms and conditions.) $95.00 25.0 PRICE FOR ADDITIONAL SERVICE MANUAL $50.00 26.0 PRICE FOR ADDITIONAL PARTS MANUAL $50.00 27.0 PRICE FOR ADDITIONAL OPERATIONS MANUAL $50.00