CRANES & MATERIAL HANDLING CRANES & MATERIAL HANDLING WE LIFT YOUR WORLD.

CRANES & MATERIAL HANDLING CRANES & MATERIAL HANDLING WE LIFT YOUR WORLD.

FABER THE CABLE PROFESSIONALS. As a specialist wholesaler for cables and wires, the product portfolio we can offer our customers has great width and depth. We keep approx. 70,000 kilometres of cables and wires worth around 100 M available for them on 148,000 m². This makes us one of the largest cable distributors in Europe. On a project basis, we are also able to provide preassembled ropes and optical fibre cables specifically for cranes and hoists. With up to 17,000 articles in our product portfolio, we have one of Europe's largest ranges of cables and wires. The basis of our business concept: instant product availability, extraordinary product variety and thus risk minimization for our customers. This means for you: no capital commitment, no risk of theft and no valuation risk. We thus support you in avoiding idle periods and successfully countering the time and cost pressure. Our cables meet all the requirements for container cranes, reelable applications, festoon systems, drag chains and electronically controlled hoists. Our product portfolio includes cables and accessories for power supply, measurement and control technologies, and for optical data transmission. In addition to the familiar German DIN VDE standards, our products also meet most relevant standards of other countries. Our crane cables meet the IEC standards and all important international standards. We meanwhile always keep an eye on the stringent quality requirements applicable to our products. Our suppliers are ISO 9001-certified and their products are carefully inspected upon receipt. We also supply certain cables with a cul approval for use in the North American and Canadian market. Seite 3

FABER PRODUCTS FOR INDUSTRY PROFESSIONALS. All product images shown here are for illustration only and may differ from the real products. PLEASE ALSO NOTE OUR DATA SHEETS AT: SHOP. FABERKABEL.DE Rubber reeling cable NSHTÖU Rubber reeling cable NSHTÖu/3 Pendant cable Faber LIFT-2S Plus Rubber cable H07RN-F APPLICATION: As a reelable connection and control cable in hoists, conveyor and transport systems under heavy mechanical stress loads, and as a rope, reeled or festoon cable in dry, damp and wet spaces and in process water. The cable is largely resistant to acids, bases and oils. Compliance with the relevant installation guidelines for this cable is urgently recommended. APPLICATION: As a reelable connection and control cable in hoists, conveyor and transport systems under heavy mechanical stress loads, and as a rope, reeled or festoon cable in dry, damp and wet spaces and in process water. The cable is largely resistant to acids, bases and oils. Compliance with the relevant installation guidelines for this cable is urgently recommended. APPLICATION: For connecting control units or as a self-supporting control line for heights up to 50 m. For indoor and outdoor use. APPLICATION: For medium mechanical stress loads in dry, damp and wet spaces as well as outdoors. Also for permanent installation on plaster or machine parts. This cable is oil-, UV- and ozone-resistant. Rubber flat cable NGFLGÖU Rubber flat cable (N)GFLCGÖU PVC flat cable H07VVH6-F Trailing cable NTSCGEWÖU (ST) APPLICATION: For connecting movable parts of machine tools, conveyor systems and large equipment where the cables only move in a single dimension (cable trolley operation). For installation in dry, damp and wet spaces as well as outdoors. APPLICATION: For connecting movable parts of machine tools, conveyor systems and large equipment where the cables only move in a single dimension (cable trolley operation). For installation in dry, damp and wet spaces as well as outdoors. Thanks to the individual shielding of every core, this cable offers improved EMC attributes. APPLICATION: Flat cords in PVC design are mostly used as trailing cables for overhead cranes, floor conveyor systems and shelf control units. Max. suspension length 35 m. APPLICATION: As a power supply cable for use in water, e.g. for connecting dredgers, floating docks, pumps, etc. where high mechanical stress loads are to be expected. Also usable in wastewater, salt water and brackish water in depths up to 500 m. Reeling PUR-insulated cables Faber PUR Reeling EMC motor cable 2XSL(St)CHv DB Trailing cable (N)TSCGEWÖU MT PLUS Trailing cable (N)TSCGEWÖU MT SUB E PLUS APPLICATION: As a reelable connection and control cable in hoists, conveyor and transport systems under heavy mechanical stress loads. Its good resistance to UV and moisture renders this cable suitable for use indoors, outdoors and in water up to an immersion depth of 50 m. This cable is largely resistant to oils. Compliance with the relevant installation guidelines for this cable is urgently recommended. APPLICATION: Halogen-free and flame-retardant cable for EMCcompliant connection of frequency converters. For use under medium mechanical stress loads if firmly installed and only occasionally moved indoors, outdoors and directly in the ground. APPLICATION: Heavy medium voltage trailing cable for high mechanical stress loads such as reel operation, deflection in various dimensions or torsion. Other applications need to be clarified with us separately. We will be unable to accept any liability for them otherwise, meaning that the application will be at your own risk. APPLICATION: Heavy medium voltage trailing cable for immersion in salt water and wastewater (dredging excavator) suitable up to a maximum depth of 300 m. Festoon cable Faber PUR Festoon Festoon cable Faber PUR Festoon C Drag chain cable Faber EFK SC 12Y11Y Drag chain cable Faber EFK SC 12YC11Y APPLICATION: As a power and control cable under very high mechanical stress loads, great operational bending frequencies, and especially for use with cable trolleys, drag chains and moving parts of machine tools, conveyor systems and similar in dry, damp and wet spaces as well as outdoors. This cable is suitable for continuous use in water (not potable water) up to a depth of 50 m. APPLICATION: As a power and control cable under very high mechanical stress loads, great operational bending frequencies, and especially for use with cable trolleys, drag chains and moving parts of machine tools, conveyor systems and similar in dry, damp and wet spaces as well as outdoors. This cable is suitable for continuous use in water (not potable water) up to a depth of 50 m. APPLICATION: Highly flexible control cable for continuously moving applications under extreme conditions indoors and outdoors. This cable is halogen-free, flame-retardant and resistant to most chemicals found in industrial environments. Please note our advice for using drag chain cables, available from our website. APPLICATION: Highly flexible control cable for continuously moving applications under production conditions indoors and outdoors with special EMC requirements. If freely moving without tensile stress, also for use in drag chains. This cable is flame-retardant and resistant to many chemicals found in industrial environments. Please note our advice for using drag chain cables, available from our website.

C O O P E R A T I O N : CRANE MODERNIZATION & MAINTENANCE C O O P E R A T I O N : ASSEMBLY. REPAIR. INSTALLATION. FABER can look back on 68 years of serving a great variety of different market sectors with its customer-oriented logistics and services, broadly diversified cable and wire portfolio, high product availability, and the technical know-how required to also qualify as a provider of customized solutions. With the expansion of the crane & hoist division, we can offer our strengths as detailed above in combination with our technical expertise in a market sector where the short-term availability of cables and wires and fast response times are indispensable. Especially for malfunctions, repair and modernization projects, we are always available as a direct contact partner for service companies, industrial enterprises or harbour operators with our product and service portfolio. ASSEMBLY. BECKER & HÜSER assembles cables in the low and medium voltage range and hybrid cables with power, control and FO supply for a huge range of different applications on order. From ropes for gravel quarries via floating dredger applications through to reelable systems in a great variety of crane applications together with our partner, we will always find the perfect solution for your requirements here at Faber. Thanks to the additional cooperation between Becker & Hüser and KROTT Electronic, we are also able to design customized hybrid connector system solutions for you to order. TRATOS is an international manufacturer and supplier of special cables for moving applications with a long experience and several case studies in the crane industry. This special range known as TRATOSFLEX, includes cables for monospiral and multi-spiral reeling, basket application, festoons and spreaders. In our stock range we have TRATOSFLEX ES3 for monospiral reeling, TRATOSLIGHT VRDB for vertical and TRATOSCOILFLEX for basket applications for spreaders. For any customized specified application with additional control cores or other fiber optics please don t hesitate to contact us as well. REPAIR. INSTALL ATION. If defective external supply cables bring a crane to a standstill, the bills can be huge. Thanks to the many years of experience and always perfectly trained team of our cooperation partner, Becker & Hüser in Sonsbeck, we can offer you a 24/7 emergency service, which is also available on-site around the world if push comes to shove. A trained service and installation team is always available to you to support you locally in the installation of new low- and medium-voltage equipment. Nexans manufactures a complete range of cables that can be used for the four most important functions of different crane types cable trolleys, cable reels, spreaders and control units for several crane sizes. We stock Nexans RHEYFESTOON (N) 3GRD5G-O / J and Nexans RHEYCORD OFE-MZ. They can be used in cable trolleys and drag chains and are produced in Mönchengladbach-RHEYDT in Germany. Especially for use in steelworks, we also carry out the special edition Nexans RHEYCORD OFE-SR with a center filled steel rope for higher tensile strength. Further information: www.kabelreparatur.eu For customized special solutions with hybrid constructions please contact us. Klaus Faber AG Cranes & Material Handling Seite 6 Klaus Faber AG Cranes & Material Handling Seite 7

FABER CRANE CABLES FABER ONLINE SHOPPING Festoon Chain available 24/7 worldwide online product availability check customer-specific prices document archive (invoices, delivery notes and order confirmations) article search, also using filters technical documents indication of remaining lengths with reduced prices FIND OUT MORE AT: shop.faberkabel.de Reeling Basket Klaus Faber AG Cranes & Material Handling Seite 8

TRUSTWORTHY OUR REFERENCES. SATISFIED CUSTOMERS ARE THE B E S T P U B L I C I T Y. We view the business through the eyes of the client, and base our actions on this principle. Which is why we always take care of our clients and unfailingly pursue the aim of consistently providing the best service. We want our clients to be successful. That is the key to our success and also the reason why companies remain loyal to us. These and many other clients place their trust in Faber. More information on our references is available at: www.faberkabel.de/en/industries/references/ Klaus Faber AG Cranes & Material Handling Seite 10

FABER. WIRE ROPES. As a rope specialist, we maintain one of the largest crane rope warehouses in our partner network, where we keep ropes available for all leading crane manufacturers. Specifically, our partner is an original equipment manufacturer (OEM) for one of the world's leading producers of industrial cranes and crane components. Our range includes: Hoist ropes Trolley ropes Holding and suspension ropes Mounting ropes Boom adjustment ropes Special ropes Truck-mounted crane ropes Electric haulage ropes Tower crane ropes Excavator and grab ropes Guy ropes Forestry ropes Seite 12

FABER THE SERVICE PROFESSIONALS. Be it crane cables and crane wires for construction sites or port facilities, transport systems or production halls, or for use in electrically operated handling systems: We consistently keep everything you need in stock and will quickly and reliably supply you with our products in the lengths you desire. But we can also offer you many services over and beyond this, including cable assembly, crane unloading or cable reel collection, for example. You can contact us at: T +49 681 9711-0 info@faberkabel.de Get in touch. We would be happy to support you in the realization of your projects. W E A R E L O O K I N G FORWARD TO HEARING FROM YOU. DIVISION CRANES & MATERIAL HANDLING Alexander Keunecke Head of Business Unit Cranes & Material Handling Heinz-Fangman-Str. 2-4, W-tec Haus 5, 42287 Wuppertal T +49 20297473721 M +49 1712658559 AKeunecke@faberkabel.de Nathalie Steinert Sales T +49 681 9711-235 F +49 681 9711-19235 NSteinert@faberkabel.de Thomas Lelle Special cable T +49 681 9711-155 F +49 681 9711-19155 M +49 160 2658734 TLelle@faberkabel.de

Klaus Faber AG Headquarters Lebacher Straße 152 156 66113 Saarbrücken Germany T +49 681 9711-0 F +49 681 9711-289 info@faberkabel.de Klaus Faber AG Export and logistics centre Hedemünden Kirchweg 12 14 34346 Hann. Münden Germany Klaus Faber AG Export and logistics centre Fichtenau Gärtnerstraße 1 74579 Fichtenau Germany Get to know more: www.faberkabel.de