Alterostat Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for the measurement of pressure and temperature. Applications Machine tools HVAC Refrigeration Process technology Features With 1 adjustable step between stages Short response time Protection IP54 Electrical connection on terminal screw Data sheet 01/015 Technical Data Designation of application Multistage thermostat with remote sensor Not adjustable Measuring range -30... +40 to +70... +350 C Repeatability ± 0.5 % FS typ. Output signal Floating change-over contact Approval EN60730-1/ EN60730--9: Typ.B.H Subject to change Trafag Sensors & Controls Switzerland Industriestrasse 11 8608 Bubikon Tel. +41 44 9 3 3 Fax +41 44 9 3 33 page 1/6 www.trafag.com trafag@trafag.com
Ordering information/type code Custom build code XXX XX XX XXX XX XXXXXXXXX XX XX External adjustment 104 Internal adjustment 114 Microswitch Small switching differential, not adjustable 10 Average switching differential, not adjustable 11 With gold contacts, not adjustable 1 Sensor max. -30... +40 45 01-10... +5 60 07 0... +35 70 09 +10... +45 85 11 +10... +80 100 13 +15... +30 60 17-10... +35 70 94 Sensor max. -10... +80 85 95 +5... +95 105 0 +0... +110 115 3 +0... +150 165 31 +0... +30 50 4 +40... +300 330 53 +70... +350 380 54 Sensor 1) Sensor diameter Sensor material [mm] Ø7 Stainless steel 41 Ø4.7 Stainless steel 311 Ø7 Stainless steel 31 Ø9 Stainless steel 331 4, 53, 54 Ø4.7 Stainless steel 111 4, 53, 54 Ø7 Stainless steel 11 4, 53, 54 Ø9 Stainless steel 131 Ø4.7 Copper 41 Ø7 Copper 4 Ø9 Copper 43 Ø4.7 Copper 31 Ø7 Copper 3 Ø9 Copper 33 Sensor diameter Sensor material [mm] 4, 53, 54 Ø4.7 Copper 11 4, 53, 54 Ø7 Copper 1 4, 53, 54 Ø9 Copper 13 Ø4.7 413 Ø7 43 Ø9 433 Ø4.7 313 Ø7 33 Ø9 333 4, 53, 54 Ø4.7 113 4, 53, 54 Ø7 13 4, 53, 54 Ø9 133 Fixing ) Nut M10 (for remote sensing version) 10 Console (for remote sensing version) 17 Console (for remote sensing version) 19 Grubscrew locked, lateral (direct mounting version) 1 Captive nut (for direct mounting version) 14 Grubscrew locked with thermal distance piece (for direct mounting version) 18 Protection tube See data sheet H7114/ H7163 XXXX.XXXX page /6
XXX XX XX XXX XX XXXXXXXXX XX XX Accessories Signal lamp 14 Set blocking (only type 114) 15 Condensator over Pin 1-1 Condensator over Pin 1-3 13 Condensators over Pin 1- / 1-3 3 Railway version (UIC 616) 8 Outdoor usage (aerated) 44 Capillary tube protection: Flexible metal tube, brass nickel 90 Capillary tube protection: Flexible metal tube 1.4541/VA 91 Capillary tube protection: PVC tube 9 Capillary Capillary tube length up to 5000 mm (no specification required for direct mounting on protection tube) L=XXXX 3) tube length Steps between stages 1) See data sheet H7114/H7163 ) See data sheet H7106 3) Overlengths upon request Desired stage difference to be indicated when ordering (without indication = switches synchronous) Switch 1 on scale, difference switch to scale -6 C... +15 C Minimum distance between switches: Switch 10: ±1 C Switch 11/1: ± C Standard products (extra short lead time) Product No. Type Code Temperature range Switching differential Smallest stage difference Largest stage difference Sensor max. MS40 114 1101 4 19-30... +40 1.8 (fixed) 0.8 5 45 MS35 114 1109 4 19 0... +35 1.8 (fixed) 0.8 15 50 MS95 114 110 3 19 +5... +95.5 (fixed) 1. 35 105 MS150 114 1131 3 19 +0... +150 3 (fixed) 1.5 40 165 MS30S 114 114 11 19 +0... +30 4.5 (fixed) 70 50 MS350S 114 1154 11 19 +70... +350 5 (fixed).5 80 380 page 3/6
Specifications Accuracy Repeatability ± 0.5 % FS typ. Scale accuracy typ. ± % FS typ. See table Switching point Temperature compensated with bimetal switch lever Environmental conditions Ambient temperature +45 C: -30...+50 C +45...+50 C: -30...+70 C > + 50 C: -10...+70 C (Important: Temperature at sensor may not exceed maximum sensortemperature) Storage temperature Protection < +45 C: -30...+50 C > +45 C: -30...+85 C IP54 Humidity Max. 95 % relative Mechanical Data Sensor housing See ordering information Filling Housing Screwed cable gland Installation Weight Liquid Noryl PA, Polyamide any position ~ 480 g Microswitch Rating See table Resistance of insulation > MΩ Dielectric strength U 50V: 1.45 kv U 500V: kv terminal ground Life time (mechanical) Microswitch 10/11: 0 Mio. cycles Microswitch 1: 0.5 Mio. cycles Electrical connection Cable gland PG13.5 Cable-Ø 5...1.5 mm Terminal screw 6 x 1...5 mm² Additional information Documents Data sheet www.trafag.com/h7139 Instructions www.trafag.com/h70311 Flyer www.trafag.com/h70965 page 4/6
Dimensions MS 104/114 83 5 000 15 5 16 C 0 PG 13.5 104.XXXX.XXX.XX... 000 15 67 5 76.5 60 x Ø 5. 45.7 1 0 PG 13.5 114.XXXX.XXX.XX... Fixation 19 Electrical connection Stage adjustable 1 3 1 3 Switch 1, on scale Switch, + or to switch 1 page 5/6
typ. 30... +40 +10... +80 Microswitch 10 Microswitch 11 Microswitch 1 Steps between stages from switch S to switch S1 (S1 on scale): S1 > S Steps between stages from switch S to switch S1 (S1 on scale): S1 < S -10... +80 +5... +95 +0... +110 Microswitch 10 Microswitch 11 Microswitch 1 Steps between stages from switch S to switch S1 (S1 on scale): S1 > S Steps between stages from switch S to switch S1 (S1 on scale): S1 < S 10... +5 0... +35 +10... +45 +15... +30-10... +35 0.7 0.7 0.7 1.5 1.8 1.8 1.8.5 1.8 1.8 1.8.5 0.8... 5 0.8... 15 0.8... 10 1.... 5 0.8... 1 0.8... 6 0.8... 4 1.... 8 +0... +150 +0... +30 +40... +300 +70... +350 1.5 1.8.5.5 3 4.5 5.5 3 4.5 5 1.... 35 1.5... 40... 70.5... 80 1.... 15 1.5... 0... 30.5... 40 Electrical data switch Rating Resistive Load (Inductive Load) Type Features AC DC 10 Small switching differential, not adjustable 15 V, 10 (1.5) A 50 V, 10 (1.5) A 11 Average switching differential, not adjustable 15 V, 15 (1.5) A 50 V, 15 (1.5) A 500 V, 10 (0.75) A 1 Gold contacts, not adjustable 4 V, 0.1 (0.1) A 1 V, 1 (1) A 5 V, () A 50 V, 0. (0.0) A 15 V, 0.4 (0.03) A 30 V, (1) A 14 V, 15 (.5) A 50 V, 0.5(0.03) A 15 V, 0.5(0.05) A 30 V, 6 (1.5) A 14 V, 15 (1.5) A 4 V, 0.1 (0.1) A 1 V, 1 (1) A 5 V, () A page 6/6
Modifications Index Date Description b 11/003 New data sheet c 11/004 Page 4: rating microswitch 11 d 05/005 Page 3: Operating temperature specifications have changed e 08/005 Page : switch II (Scale)" changed to switch I (Scale)" f 1/009 Page : Sensor Copper chrome " all types removed g 06/010 Page 4: contact rating of microswitch 1 increased from 0.01A to 0.1A (4 AC & 4 DC) Page 4: Switch 1: advise suitable for intrinsically safe control circuit" removed because simple apparatus" devices are available h 09/010 Page 3: Operating temperature changed to ambient temperature, s separated to: +45 C = -30...+50 C +45...+50 C = -30...+70 C >+50 C = -10...+70 C i 10/011 Page 3: Dielectric strength changed to U 50 V:1.45kV / U 500V: kv k 01/015 New layout Page 6: Switch 11 DC rating corrected: old 14V 15(.5) A, new 14V 15(1.5) A page spec