Engine Output: 90 kw / 122 HP - 94 kw / 128 HP Bucket Capacity: m³

Similar documents
Wheeled Excavator A 900 C. Operating Weight: 36,800-42,800 lb Engine Output: 95 kw / 129 HP Bucket Capacity: yd³

Wheeled Excavator A 312. Operating Weight: 12,900-15,000 kg Engine Output: 81 kw / 110 HP Bucket Capacity: m³

Machine for Industrial Applications

Technical Description Hydraulic Excavator A 310 B. Operating Weight 11,1 11,9 t Engine Output 58 kw (79 HP) Bucket Capacity 0,10 0,45 m 3

Machine for Industrial Applications A 934 C HD

Machine for Industrial Applications A 944 C HD

litronic` Operating Weight: 80,350 83,000 lb Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw

Machine for Industrial Applications A 954 C HD

A 934 C HD. Machine for Industrial Applications

Machine for Industrial Applications

Machine for Industrial Applications

Wheeled Excavator A 916. Operating Weight: 16,800 19,000 kg Engine Output: 110 kw / 150 HP Bucket Capacity: m³

A 934 C HD. Machine for Industrial Applications

A 954 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

Engine Output: 65 kw / 88 HP - 68 kw / 92 HP Bucket Capacity: m³

A 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 944 B HD. Technical Description Hydraulic Excavator. Machine for Industrial Applications

Crawler Excavator. litronic` Operating Weight: 26,170 28,340 kg Engine Output: 130 kw / 177 HP Bucket Capacity: 0,30 1,40 m 3

Technical Description A 308 Hydraulic Excavator

litronic` Timber Operating Weight: 29,300 kg Engine Output: 140 kw / 190 HP

Machine for Industrial Applications A 944 C HD

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 31,7 33,4 t Engine Output 145 kw (197 HP)

Crawler excavator R 976

Crawler Excavator. Operating Weight: 38,500-46,300 kg Engine Output: 190 kw / 258 HP Bucket Capacity: m³

Crawler Excavator. Operating Weight with Backhoe Attachment: 49,300-60,400 kg Operating Weight with Shovel Attachment: 54,000-62,100 kg

Crawler Excavator R 954 C. Operating Weight: 49,200-57,000 kg Engine Output: 240 kw / 326 HP Bucket Capacity: m³

HYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C

litronic` Timber Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249): 190 HP / 140 kw

Machine for Industrial Applications A 924 C

R 944 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications Operating Weight 39,2 41,6 t Engine Output 180 kw (245 HP)

Crawler Excavator R 934 C. Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Stufe IIIA / Tier 3 Bucket Capacity:

A 934 C HD ERC. Machine for Industrial Applications. 129 kw / 175 HP. Engine Output (SAE J1349): Engine Output (ISO 9249):

Machine for Industrial Applications LH 22 M

The crawler excavator. R 924 COMPACT

Crawler Excavator. Operating Weight: 31,800-33,800 kg Engine Output: 150 kw / 203 hp Bucket Capacity: m³

litronic` Timber Engine Output (SAE J1349): 201 HP / 150 kw Engine Output (ISO 9249): 204 HP / 150 kw

R 924 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications

A 934 C ERC. Machine for Industrial Applications. 129 kw / 175 HP. Engine Output (SAE J1349): Engine Output (ISO 9249):

R 954 C 108, , / 326 HP

LH 120 M. Machine for Industrial Applications

R 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 69,885 73,630 Engine Output 197 HP (145 kw)

Wheeled Excavator. Operating Weight: 11,800 12,800 kg Engine Output: 75 kw / 102 HP Bucket Capacity: m³

Crawler Excavator. Engine Output (SAE J1349): Engine Output (ISO 9249): 255 HP / 190 kw 258 HP / 190 kw

Crawler Excavator. R 924 Compact Swing

B75W COMPACT WHEELED EXCAVATOR. Operating weight Dig depth Engine power Bucket capacity Lifting force (arm) Breakout force at bucket edge

266 HP 94,500 lbs. C Series. green line Material Handling Machine

Wheeled Excavator A 912 COMPACT. Operating Weight: 12,700 13,900 kg Engine Output: 80 kw / 109 HP Bucket Capacity: m³

Material Handling Machine LH 110 Port. Operating Weight: 100, ,000 kg Engine: 300 kw / 408 HP Stage IV Stage IIIA System Performance: 463 kw

Crawler excavator R 926. Operating Weight: 25,700-28,950 kg Engine Output: 129 kw / 175 hp Bucket Capacity: m³

132 HP 54,000 lbs. C Series. green line Material Handling Machine

Stationary Electric Material Handlers. EP 934 C Working Radius: m EP 944 C Working Radius: m EP 954 C Working Radius: m

Crawler excavator R 924

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52.

LH 50 M. Machine for Industrial Applications. Engine Output (SAE J1349): 188 HP / 140 kw Engine Output (ISO 9249):

Excavators Electric Material Handlers ER 934 C - ER 954 C

Crawler Excavator. Operating Weight: 24,400 24,800 kg Engine Output: 115 kw / 156 HP Bucket Capacity: m³

Wheeled Excavator A 928. Operating Weight: 26,500 27,600 kg Engine Output: 155 kw / 211 HP Bucket Capacity: m³

Machine for Industrial Applications LH 80 M

t 95 kw (130 hp) m 3. WheelED Excavator 150W.

STABLE. STRONG. STEADY.

MATERIAL HANDLER MHL320 D. Specifications. Features

Hydraulic Excavator. Operating weight: 34 tons Isuzu engine: kw (248 hp) Backhoe buckets: 740 to 2010 L

Crawler excavator R 916 R 926

Material Handling Machine LH 150 Port

Crawler Excavator. Operating Weight: 32,600 33,500 kg Engine Output: 150 kw / 203 HP Bucket Capacity: m³

Technical Description R 9350 Hydraulic Excavator

WA95-3 WA95-3 WHEEL LOADER. NET HORSEPOWER 55 kw 75 PS OPERATING WEIGHT kg BUCKET CAPACITY 0,9-1,6 m³

EZ26. The design for champions: EZ26. Tracked Zero Tail Excavators

Hydraulic Excavator. Operating weight: 36 tons Isuzu engine: kw (248 hp) Backhoe buckets: 740 to 2010 L

MATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m

R 964 B. Technical Description Hydraulic Excavator

MH6.6. Net flywheel power 129 kw hp Maximum operating weight kg Bucket capacity (SAE) m 3 PROVEN PERFORMANCE

MATERIAL HANDLER MHL360 F HD. Features. Specifications

EC210B LC EC210B NC/EC210B NLC

LH 35 M Timber. Product Information Log Loader

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

TECHNICAL DATA TIMBER HANDLING MACHINES

STABLE. STRONG. STEADY.

ROBUST. PRECISE. EFFICIENT.

MATERIAL HANDLER MHL360 D. Specifications. Features

R 984 C. Technical Description Hydraulic Excavator

EC380EHR, EC480EHR VOLVO EXCAVATORS

EW210D MH. VOLVO WHEELED EXCAVATOR 24 t 129kW

E26. Compact Excavators

SYSTEM 180 AS 90. > The loader specialist. > Swing Shovel Loader m 3

Log Loader LH 35 M Timber

Design 6-cylinder, turbocharged diesel, charge air cooler

t 116 kw (158 HP) m 3. WheelED Excavator 150W 190W.

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM

MATERIAL HANDLER MHL340 D. Features. Specifications

305C CR. Mini Hydraulic Excavator. Diesel Engine Net Power (ISO 9249) at 2400 rpm Operating Weight (without extra counterweight)

TOUGH WORLD. TOUGH EQUIPMENT.

MATERIAL HANDLER MHL360 E. Specifications. Features. Up to 59 ft 18 m

TB295W HYDRAULIC EXCAVATOR. Operating Weight: 9,765 to 10,410 kg. From World First to World Leader

Material Handling Machine LH 80 Industry

MHL340 E TECHNICAL DATA MHL 340

PRELIMINARY. 224 kw t. Mobile material handling machine 11.3 m. Level IV

COMPACT EXCAVATORS E45 E50 E55

MH2.6/3.6. NET FLYWHEEL POWER 74 kw - 99 hp 87 kw hp. OPERATING WEIGHT kg kg. BUCKET CAPACITY m

Material Handling Machine

Transcription:

Wheeled Excavators A 314 A 316 Operating : 14,4-18,3 kg Engine Output: kw / 122 HP - 4 kw / 128 HP Bucket Capacity:.1 -. m³

A 314 Operational weight: 14,4-16,6 kg Engine output: kw / 122 HP Bucket capacity:.1 -.8 m³ A 316 Operational weight: 16,3-18,3 kg Engine output: 4 kw / 128 HP Bucket capacity:.1. m³ 2 A 314 Litronic A 316 Litronic

Performance Liebherr compact excavators excel with state-ofthe-art technology and high-quality workmanship. Designed for maximum productivity, their intelligent construction allows full exploitation of potential even in confined spaces. Perfectly optimised Liebherr components give the A 314 Litronic and the A 316 Litronic outstanding operational characteristics. Reliability With over years experience in producing hydraulic excavators, Liebherr offers unique competence advantages in both manufacturing and reliability. Equipped with innovative features such as additional centrifugal pre-filters for intake air and fuel, advanced technologies are already built-in to the A 314 Litronic and A 316 Litonic. Comfort The A 314 Litronic and A 316 Litronic compact excavators offer the operator a generous workplace with state-of-the-art ergonomic design. The large window surfaces and sloping edges provide a safe overview of the entire construction area. Economy The Liebherr Litronic system increases the performance of the machines and reduces fuel consumption. Tailor-made servicing is available through the individual service program from Liebherr. Long service intervals as well as short and quick servicing times increase cost-effectiveness of the compact excavators. A 314 Litronic A 316 Litronic 3

Equipment Dual hoisting cylinders Kinematics for higher hoist capacities 4 A 314 Litronic A 316 Litronic

Performance State-of-the-art technology and high-quality workmanship distinguish Liebherr s compact excavators. Designed for maximum productivity, their intelligent construction allows full exploitation of potential even in confined spaces. Perfectly optimised Liebherr components, such as the hydraulic cylinders and the drive and rotary actuators, give the A 314 Litronic and the A 316 Litronic outstanding operational characteristics. High load performance High load capacities Performance without compromise High bucket fill factor Intelligent arrangement of the uppercarriage coupled with ideal engine positioning for supporting the ballast allows excellent balance. Maximum performance and power are available at all times and guarantee high load performance. The digging attachments have been specially designed by Liebherr for high fill factors. The shape of the bucket ensures good penetration characteristics and guarantees excellent productivity. Stable base Intelligent undercarriage Transmission power The travel drive unit is fully integrated into the robust undercarriage. Intelligent in design and robust in operation, the drive-unit undercarriage offers maximum protection against debris, stones and earth. The benefits are perfect off-road capabilities and extremely good ground clearance. The powershift transmission, fitted as standard, allows fast hill driving and changing of gear without stopping. The creeper gear allows precise manoeuvring even in difficult terrain. Litronic Increases the performance of the excavator Reduces fuel consumption Allows maximum sensitivity Robust undercarriage Travel drive unit is fully integrated into the robust undercarriage Different undercarriage variants with securely welded stabilisers ensure secure ground-holding, maximum stability and long operational life regardless of application. Stabiliser and leveller blade in boxtype design. Just two pivots ensure high torsion rigidity. A 314 Litronic A 316 Litronic

Liebherr hydraulic cylinder Optimised sizes for every machine High-quality pin rod surface coating The Liebherr cylinders are fitted with a special long-life sealant system End position dampening on both sides in cylinders 6 A 314 Litronic A 316 Litronic

Reliability With over years experience in producing hydraulic excavators, Liebherr offers unique competence advantages in both manufacturing and reliability. Equipped with innovative features, such as additional centrifugal pre-filters for intake air and fuel, Litronic advanced technologies are already built-in to the A 314 Litronic and A 316. Quality down to the last detail Liebherr components Functional safety Perfect lubrication High-quality features Fuel filter Exhaust system Magnet rod Components such as swing ring, swing drive, hydraulic cylinder and the electronic components are developed, tested and manufactured by Liebherr especially for construction machinery. Components such as swing ring and swing drive are optimised to each other in the manufacturing phase, maintaining consistently high-quality standards. Delivered as standard, safety features such as automatic check valves on hoist cylinders ensure high safety standards. The operator can concentrate fully on the task because the integrated onboard electronics constantly compare data with predefined target values. The semi-automatic lubrication system fitted as standard reliably lubricates the connected lubrication points The Liebherr centrifugal fuel filter system discharges water and dirt particles with 1% reliability and is delivered as standard. A carefully designed three-chamber large-capacity exhaust system allows low noise emissions and results in longer operational life of exhaust system and engine. Delivered as standard, the magnetic rod in the hydraulic system extends the operational life of the oil. Fuel filter Pre-dewatering unit as standard Large fuel filter for a long lifespan and long filter-change intervals Reliable extraction of dust and water particles via primary centrifugal filter Liebherr key technologies Liebherr ball bearing swing ring, internal teeth Liebherr swing assembly drive for high swing moment Manufactured at competence centres in Germany with stateof-the-art production processes A 314 Litronic A 316 Litronic

Storage space-everything has its place Large, lockable stowing box in the uppercarriage Two tool boxes in the undercarriage, fitted as standard 8 A 314 Litronic A 316 Litronic

Comfort A 314 Litronic and A 316 Litronic compact excavators offer the operator a generous workplace with state-of-the-art ergonomic design. The generously laid out window surfaces and sloping edges provide a safe overview of the entire construction area. In addition, free access to all service points allows quick und easy maintenance. Mobile comfort Excellent visibility Easy climb Pleasant environment Spacious Tempomat Automotive driving The carefully designed uppercarriage with lower height, large window surfaces and rounded edges increase visibility and ensure a safe view over the entire working area. Wide steps, ergonomically designed handles and an adjustable steering column provide an easy and comfortable climb into the Liebherr operator cab. The low engine speed, in conjunction with highquality noise reduction and optimised hydraulic components, ensure pleasant levels of internal and external noise. Noise levels are similar to those of modern diesel passenger cars. Additional storage areas in the uppercarriage and undercarriage provide easy and generous storage of everyday tools. Constantly adjustable storage of the selected engine speed promotes convenient driving and operating When driving on road, your moving speed is easy to regulate with the engine speed via the accelerator pedal Maintenance benefits as standard Easy accessibility Ease of servicing Working on the engine is made easy due to the large engine compartment flap. Delivered as standard, the hydraulic tank shutoff valve disconnects the system and guarantees easy servicing work on the hydraulic system. Spacious cab Operator s seat adjustable to operator s weight and with height adjustment. Horizontally adjustable with or without console Adjustable steering column Large roof window Sunblind Foot room Ergonomically laid-out foot pedals for relaxing and non-tiring operation Steering column adjustment via a handy foot lever Non-slip foot mat with horizontal Strips for easy cleaning of cab A 314 Litronic A 316 Litronic

Intelligent cooling Hinged aerators for easy cleaning Long operational life of the transmission components Accelerated warm-up phase and regulation of cab temperature Exhaust system is external to the engine compartment to be cooled 1 A 314 Litronic A 316 Litronic

Economy The A 314 Litronic and A 316 Litronic compact excavators offer the operator a generous workplace with state-of-the-art ergonomic design. Long service intervals and easily accessible components reduce operating costs. Increase in visibility, operational flexibility and easy handling are all convincing arguments favouring the Liebherr compact excavator range. Low operating costs Automatic idling Liebherr Tool Control Maintenance points Comprehensive service program Future-proof and stable in value Tailor-made services High resale value During periods of inactivity (machine not driving or working), the engine speed is reduced down to idling via a sensor, reducing fuel consumption and emissions. As soon as the hydraulic attachment tool has been changed, the necessary pressure values and pump flows can be accessed at the touch of a button. Up to 1 values can be saved under each tool name. Changing tools couldn t be quicker or easier. Service points for the engine, such as filter or fill level displays, are easily accessible. The large rear flap allows simple and quick maintenance. Tailor-made servicing is available through the individual service program from Liebherr. With exchangeable components from the ReMan, ReBuilt and Repair programs, an ideal solution for every requirement is available with approved manufacturer quality. Service personnel trained directly at the manufacturers offer tailor-made services. Direct contact with Liebherr is ensured by the full integration of all service centres within the Liebherr logistics system. Electronic access to our world-wide replacement parts management system allows a roundthe-clock replacement part availability of 8%. Liebherr excavators are built for a long operational life through the use of high-quality materials and durable quality of workmanship, thus guaranteeing maximum stability of value. Likufix Quick-change system for hydraulic and mechanical attachments Changing of all attachments from the operator cab Considerable time-saving when compared to manual connection of the hydraulic hoses Engine Water-cooled diesel engine with direct injection, turbo-charged Large 4.8 l displacement Operational and driving engine speed of only 18 rpm Large-volume fuel filter A 314 Litronic A 316 Litronic 11

Technical Data Engine Rating per ISO 24 A 314 litronic` kw (122 HP) at 1,8 RPM A 316 litronic` 4 kw (128 HP) at 1,8 RPM Model Deutz TCD213 LV4 according to level IIIA / Tier 3 Type 4 cylinder in-line Bore/Stroke 18/13 mm Displacement 4.8 l Engine operation 4-stroke diesel Common Rail turbo-charged and after-cooler reduced emissions Harmful emissions values in accordance with /68/EG Stage IIIA Cooling system water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner and automatic dust discharge (TopAir), main and safety elements Fuel tank 2 l Engine idling sensor controlled Electrical system Voltage 24 V Batteries 2 x 2 Ah/12 V Alternator three phase current 24 V/ A Hydraulic System Hydraulic pump Liebherr, variable displacement, swashplate pump Max. flow A 314 litronic` 23 l/min. A 316 litronic` 2 l/min. Max. hydr. pressure 3 bar Hydraulic pump regulation and control Liebherr-Synchron-Comfort-system (LSC) with electronic horsepower regulation, pressure cutoff, load sensing and torque controlled swing drive priority Hydraulic tank capacity 1 l Hydraulic system capacity max. 2 l Filtration one main return filter with integrated partial micro filtration ( µm) Cooling system compact cooling system comprising cooling unit for water, hydraulic oil and charge air with stepless, thermostatically controlled fan, fan can be folded away for comfortable cleaning of the radiator Engine speed and output tuning stepless alignment of engine output and hydraulic power via engine speed variable mode-settings Hydraulic Controls Power distribution via control valve with integrated safety valves, simultaneous and independent operation of travel drive, swing drive and work Control type Attachment and swing proportional via joystick levers Travel proportional via foot pedal Additional functions via switch and/or proportional foot pedals Option Liebherr-Proportional-Controls, proportionally acting transmitters on the joysticks for additional hydraulic functions Swing Drive Drive Liebherr swashplate motor with torque control and integrated brake valve Transmission Liebherr compact planetary reduction gear Swing ring Liebherr sealed single race ball bearing swing ring, internal teeth Swing speed. RPM stepless Swing torque 42 knm Holding brake pedal controlled positioning brake Operator s Cab Cab largely dimensioned ergonomic cab resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window, large roof window, sun visor Operator s seat shock absorbing suspension, adjustable to operator s weight, 6-way adjustable seat, backward/forward seat adjusting with automatic height adjustment Joysticks integrated into adjustable seat consoles Monitoring ergonomically arranged, non-glare instrumentation, menu-driven retrieval of current operating conditions via display, automatic monitoring, display, warning (acoustic and visual) and saving of anomalous operating conditions, such as engine overheating and excessively low engine oil pressure or hydraulic oil level Digital hour meter visible from outside Heating system hot water heat exchanger to provide heated fresh air or circulated air, with additional front window air vents, operating unit in right console Noise emission ISO 636 L pa (inside cab) 2/14/EC L WA (surround noise) = db(a) Sound level in correspondence with Blue Angel guidelines. Undercarriage = 2 db(a) A 314 litronic` = 3 db(a) A 316 litronic` Drive variable flow swashplate motor with automatic brake valve Transmission oversized two speed power shift transmission with additional creeper speed Travel speed km/h (creeper speed off road). km/h (off road) 6. km/h (creeper speed on road) 2. km/h (road travel) max. 3. km/h Speeder (Option) Driving operation automotive driving with accelerator pedal, tempomat function: stepless saving of accelerator pedal position, both off- and on-road Axles 26 t excavator axles (A 316 litronic` 32 t), automatic or operator controlled front axle oscillation lock Brakes steering and rigid axle with wet, maintenancefree multi disc brakes with minimized backlash. Spring applied/pressure released parking brake integrated into gear box Stabilization stabilizing blade (adjustable during travel for dozing) 2 point outriggers stabilizing blade + 2 point outriggers Option EW (extra wide gauge) undercarriage Attachment Hydraulic cylinders Liebherr cylinders with special seal system. Shock absorption Pivots sealed, low maintenance Lubrication Liebherr semi-automatic central lubrication system 12 A 314 Litronic A 316 Litronic

Dimensions E D A W H C K Q M T1 X V L U1 B B1 I2 J2 J3 I3 U2 T2 B B2 T3 U3 T1 B B2 B1 A 314 litronic` mm A 316 litronic` mm A 2,1 2, B 2, 2, B 1) 2, 2, B1 3,6 3,6 B2 2, 2, B2 1) 2, 2, C 3,12 3,13 D 2,6 2,26 E 2,6 2,26 H 2,32 2,32 I2 48 48 I3 38 38 J2 68 68 J3 8 8 A 314 litronic` mm A 316 litronic` mm K 1,2 1,2 L 2,4 2,4 M 11 1,1 Q 36 36 T1 1, 1, T2 1,31 1,31 T3 1,1 1,1 U1 4,3 4,3 U2 4,66 4,66 U3 4,4 4,4 1) = EW-Undercarriage E = Tail radius Tires 1.-2 A 314 litronic` Stick Hydr. Adjustable Boom Gooseneck Boom m Adjustable Up/Down Adjustable Offset Boom 3.2 m Plus Offset Boom 3.3 m 4.3 m stabil. 2 pt. blade + stabil. 2 pt. blade + stabil. 2 pt. blade + stabil. 2 pt. blade + blade outr. 2 pt. outr. blade outr. 2 pt. outr. blade outr. 2 pt. outr. blade outr. 2 pt. outr. m mm mm mm mm mm mm mm mm mm mm mm mm V 2.2,,4,*, 4,8*,4*,,,,3,1*,6 2.4,2,,6*,4,1*,8*,,4 6,*,*,3*,8 2.6, 4,,*,6,2*,*,1 4,,*,4*,3*, W 2.2 2,8 2,8 2,8* 2, 2,8* 2,* 3,1 3,1 3,1 3,1 3,* 3, 2.4 2,8 2,8 2,8* 3,2 3,1* 3,2* 3, 3, 3,* 3,3* 3,2* 3,2 2.6 2,8 2,8 2,8* 3,4 3,2* 3,2* 2, 2, 2,* 3,4* 3,4* 3,4 X 2.2 8,3 8,2 8,*,,8* 8,3* 8,3 8,2 8,2,8,* 8,2 2.4 8,3 8,2 8,* 8,,* 8,4* 8,4 8,2 8,8*,*,* 8,2 2.6 8,3 8,2 8,8*,,* 8,4* 8,4 8,2 8,8*,6*,* 8,1 A 316 litronic` Stick Hydr. Adjustable Boom Gooseneck Boom. m Adjustable Up/Down Adjustable Offset Boom 3.4 m Plus Offset Boom 3.6 m 4. m stabil. 2 pt. blade + stabil. 2 pt. blade + stabil. 2 pt. blade + stabil. 2 pt. blade + blade outr. 2 pt. outr. blade outr. 2 pt. outr. blade outr. 2 pt. outr. blade outr. 2 pt. outr. m mm mm mm mm mm mm mm mm mm mm mm mm V 2.2 6,,,,8,, 6,2 6,1 6,1 6,2 6,1 6,1 2.4,8,,,,4,4 6,1,,,,4,4 2.6,,,6,4,3,6* 6,,8,8,3,, W 2.2 3, 3, 3, 3,1 3,1 3,1 3, 3, 3, 3,1 3,1 3,1 2.4 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 2.6 3, 3, 3, 3,1 3,1 3,1* 3,1 3,1 3,1 2, 2, 2, X 2.2 8, 8,4 8,4 8, 8,4 8,4 8,8 8,6 8,6 8,4 8,3 8,3 2.4 8,6 8,4 8,4 8, 8,4 8,4 8,8 8,6 8,6 8,4 8,3 8,3 2.6 8,6 8,4 8,4 8, 8,4 8,* 8,8 8,6 8,6 8,4 8,2 8,6 Dimensions are with attachment over steering axle * Attachment over digging axle for shorter transport dimensions A 314 Litronic A 316 Litronic 13

Backhoe Attachment A 314 litronic` with Hydr. Adjustable Boom 3.2 m ft 3 3 2 2 m 11 1 8 6 Digging Envelope with Quick Change Adapter 1 2 3 Stick length m 2.2 2.4 2.6 Max. digging depth m.1.3. Max. reach at ground level m 8. 8. 8. Max. dumping height m 6.8 6..1 Max. teeth height m.6.8. Min. attachment radius m 2. 2.4 2. 1 4 Digging Forces without Quick Change Adapter 1 2 3 1 3 2 1 Max. digging force (ISO 61) kn 6. 63.8 6.1 t 6. 6. 6.1 Max. breakout force (ISO 61) kn.1.1.1 t 8.1 8.1 8.1 Max. breakout force with ripper bucket 111.3 kn (11.3 t) Max. possible digging force (stick 1. m) 82. kn ( 8. t) - -1-1 -1-2 -3-4 - -6 1 3 8 2 6 2 1 4 1 23 3 2 1 1 m ft Operating The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 3.2 m, stick 2.2 m, quick change adapter 33 and bucket 8 mm/. m 3. Undercarriage versions A 314 litronic` with stabilizer blade A 314 litronic` with 2 pt. outriggers A 314 litronic` with stabilizer blade + 2 pt. outriggers A 314 EW litronic` with stabilizer blade A 314 EW litronic` with 2 pt. outriggers 14,8 kg 1, kg 16, kg 14, kg 1,1 kg Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) mm m 3 kg 3 2).1 22 4 2).24 2 2).28 2 2).2 26 6 2).36 2 8 2). 34 1, 2).6 38 1,2 2).8 43 3 3).18 21 4 3).26 24 3).3 24 3).31 2 6 3).3 2 8 3).3 32 1, 3).1 3 1,2 3).8 42 Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 Y V V Y Y Y Y Y Y Y Y Y Y V V Y Y Y Y Y Y y y y V V y Y Y Y Y Y Y y y y V V y Y Y Y V V y Y Y V Y Y Y Y Y Y V V y Y Y V Y Y Y y y v V y y Y Y V Y Y V y y v V y y Y Y V * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) Bucket with teeth (also available in HD-version) 3) Bucket with cutting lip (also available in HD-version) Buckets up to 4 mm cutting width with limited digging depth Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized 14 A 314 Litronic A 316 Litronic

Backhoe Attachment A 316 litronic` with Hydr. Adjustable Boom 3.4 m ft 3 3 2 2 m 11 1 8 6 Digging Envelope with Quick Change Adapter 1 2 3 Stick length m 2.2 2.4 2.6 Max. digging depth m.4.6.8 Max. reach at ground level m 8.8..2 Max. dumping height m.1.2.4 Max. teeth height m 1.2 1.4 Min. attachment radius m 2. 2. 2.8 1 4 Digging Forces without Quick Change Adapter 1 2 3 1 3 2 1 Max. digging force (ISO 61) kn 6. 6.4 6 t.1 6. 6.3 Max. breakout force (ISO 61) kn 1. 1. 1. t 1. 1. 1. Max. breakout force with ripper bucket 114. kn (11.6 t) Max. possible digging force (stick 1. m) 8.8 kn ( 8.8 t) - -1-1 -2-1 -2-3 -4 - -6-1 3 8 2 6 2 1 4 1 23 3 2 1 1 m ft Operating The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 3.4 m, stick 2.2 m, quick change adapter 33 and 8 mm/.6 m 3 bucket. Undercarriage versions A 316 litronic` with stabilizer blade A 316 litronic` with 2 pt. outriggers A 316 litronic` with stabilizer blade + 2 pt. outriggers A 316 EW litronic` with stabilizer blade A 316 EW litronic` with 2 pt. outriggers 16,6 kg 16, kg 1, kg 16, kg 1, kg Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) mm m 3 kg 3 2).1 22 4 2).24 2 2).3 2 6 2).4 3 8 2).6 4 1, 2).8 48 1,2 2). 2 3 3).18 21 4 3).26 24 3).32 2 6 3).4 33 8 3).6 38 1, 3).8 46 1,2 3) Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 V V y Y V y Y V y Y V y Y V y Y V y Y V y y y v V y v V y v V y v V y v V y v V y v y V y V V y V V y V V y V V y V V y V V y v y v y y v y y v y y v y y v y y v y y v * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) Bucket with teeth (also available in HD-version) 3) Bucket with cutting lip (also available in HD-version) Buckets up to 4 mm cutting width with limited digging depth Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized A 314 Litronic A 316 Litronic 1

Lift Capacities A 314 litronic` with Hydr. Adjustable Boom 3.2 m Stick 2.2 m 3. m m 6. m m. 6. 3. 3. 2.4* 2.4* 2.2* 2.2* 2.4* 2.4* 2.2* 2.2* 2.4* 2.4* 2.2* 2.2* 2.4* 2.4* 2.2* 2.2* 3.6 3.* 2.2 2.2* 2.* 2.* 3.* 3.* 2.2* 2.2* 2.* 2.* 3.* 3.* 2.2* 2.2* 2.* 2.* 3.* 3.* 2.2* 2.2* 2.* 2.* 3. 4.* 2.2 3.6 1. 1.* 3. 4.* 2. 4.* 1. 1.* 4.8 4.* 3.1 4.* 1.* 1.* 4.* 4.* 3.8 4.* 1.* 1.* 6..* 3.4. 2.2 3.6 2.* 6.8.* 3.8.8* 2. * 1.6 2.* 8.6*.* 4.6.8* 3.1 * 2.* 2.*.*.*.8*.8* 3.8 * 2.* 2.* 6..4* 3.4.4 2.1 3. 1.4 2.1* 6.6.4* 3.8 6.* 2.4 4.8* 1.6 2.1* 8.4.4* 4.6 6.* 3. 4.8* 2. 2.1*.4*.4*. 6.* 3. 4.8* 2.1* 2.1*. 1.2 3.2. 2. 3.4 1.4 2. 6. * 3.6 6.6* 2.2 4.8* 1.6 2.* 8.6 * 4.6 6.6* 2. 4.8* 2.1 2.* * *. 6.6* 3.6 4.8* 2.* 2.*. 3..2 1. 3.3 1.6 2. 6.3 1.8* 3.4 6.8* 2.1 4.6* 1.8 3.2* 8.4 1.8* 4.3 6.8* 2. 4.6* 2.3 3.2* 1.8* 1.8*.6 6.8* 3. 4.6* 3. 3.2*.3 1.4 2.8. 2. 3.1* 6. 1.4* 3.2.* 2.3 3.1* 8.1 1.4* 4.1.* 2. 3.1* 1.4* 1.4*.4.* 3.1* 3.1* 6. 6.3.3.4.2 6.68.64 Stick 2.4 m 3. m m 6. m m. 6. 3. 3. 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 3.6* 3.* 2.2 2.* 1.8* 1.8* 3.* 3.* 2. 2.* 1.8* 1.8* 3.* 3.* 2.* 2.* 1.8* 1.8* 3.* 3.* 2.* 2.* 1.8* 1.8* 3. * 2.2 3.6 1.6 1.* 3. * 2. 3.8* 1.* 1.* * * 3.1 3.8* 1.* 1.* * * 3.8* 3.8* 1.* 1.* 6.1 8.6* 3.4.4 2.2 3.6 1.4 2.* 1.4 1.8* 6. 8.6* 3.8.6* 2. 4.4* 1.6 2.* 1.6 1.8* 8.6* 8.6* 4..6* 3.1 4.4* 2.* 2.* 1.8* 1.8* 8.6* 8.6*.6*.6* 3.8 4.4* 2.* 2.* 1.8* 1.8*..* 3.3.4 2.1 3. 1.4 2.4 1.3 1.* 6..* 3. 6.4* 2.4 4.* 1.6 2.* 1.* 8.3.* 4.6 6.4* 3. 4.* 2. 2.* 1. 1.*.*.*.6 6.4* 3.8 4.* 2.6 2.* 1.* 1.*. 1.2 3.3.4 2. 3.4 1.3 2.2* 6. 1.3* 3.6 6.6* 2.2 4.8* 2.2* 8.4 1.3* 4.6 6.6* 2.8 4.8* 2. 2.2* 1.3* 1.3*.6* 6.6* 3.6 4.8* 2.2* 2.2*. 1.4* 3..2 1. 3.3 2.6 6.3 1.8* 3.4 6.* 2.1 4.* 1. 2.8* 8.4 1.8* 4.4 6.* 2. 4.* 2.2 2.8* 1.8* 1.8*.6 6.* 3.* 4.* 2.8 2.8*.3 1.4 2.8. 1.8 3.1* 6.1 1.* 3.2 6.1* 2.1 3.1* 8.1 1.* 4.1 6.1* 2. 3.1* 1.* 1.*.4 6.1* 3.1* 3.1* 4.88 6.31.14 6.6.4 6.. Stick 2.6 m 3. m m 6. m m. 6. 3. 3. 2.8* 2.8* 1.* 1.* 2.8* 2.8* 1.* 1.* 2.8* 2.8* 1.* 1.* 2.8* 2.8* 1.* 1.* 3.4* 3.4* 2.2 2.* 3.4* 3.4* 2. 2.* 3.4* 3.4* 2.* 2.* 3.4* 3.4* 2.* 2.* 3. 4.* 2.3 3.6* 1.6* 3. 4.* 2. 3.6* 4.* 4.* 3.1 3.6* 4.* 4.* 3.6* 3.6* 6.2 8.2* 3.4.* 2.3 3.6 1.4 2.4 1.3 1.6* 6. 8.2* 3.8.* 2. 4.3* 1.6 2.* 1.6* 8.2* 8.2* 4.6.* 3.1 4.3* 2.1 2.* 8.2* 8.2*.*.* 3.8* 4.3* 2.* 2.*..4* 3.4.3* 2.2 3. 1.4 2.4 1.3 1.8* 6.6*.4* 3. 6.3* 2.4 4.6* 1.6 3.1* 1.4 1.8* 8.4.4* 6.3* 3. 4.6* 2. 3.1* 1.8* 1.8*.4*.4*.6 6.3* 3. 4.6* 2.6 3.1* 1.8* 1.8*. 1.1* 3.3.4 2. 3.4 1.3 2.3 1.3 2.* 6.6 1.1* 3. 6.6* 2.3 4.8* 2.8* 1.4 2.* 8.4 1.1* 4.6 6.6* 2. 4.8* 1. 2.8* 1. 2.* 1.1* 1.1*.6 6.6* 3.6 4.8* 2.* 2.8* 2.* 2.*. 1.3 3.1.2 1. 3.2 1.4 2. 6.3 1.* 3.4 6.* 2.1 4.8* 1.6 2.* 8.4 1.* 4.4 6.* 2. 4.8* 2.1 2.* 1.* 1.*.6 6.* 3. 4.8* 2.* 2.*.3 2.8. 1.8 3.2 1. 3.* 6.1 1.* 3.2 6.4* 2. 3.4* 1. 3.* 8.2 1.* 4.1 6.4* 2.6 3.4* 2. 3.* 1.* 1.*.4 6.4* 3.4* 3.4* 3.* 3.*.18 6..3.6.86.6.11 6.1 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. 16 A 314 Litronic A 316 Litronic

Lift Capacities A 314 litronic` with Hydr. Adjustable Boom 3.2 m EW-Undercarriage Stick 2.2 m 3. m m 6. m m. Stick 2.4 m 3. m m 6. m m. 2.4* 2.4* 2.2* 2.2* 2.4* 2.4* 2.2* 2.2* 2.4* 2.4* 2.2* 2.2* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 4.88 6. 3.* 3.* 2.2* 2.2* 2.* 2.* 3.* 3.* 2.2* 2.2* 2.* 2.* 3.* 3.* 2.2* 2.2* 2.* 2.* 6. 6. 3.* 3.* 2. 2.* 1.8* 1.8* 3.* 3.* 2.* 2.* 1.8* 1.8* 3.* 3.* 2.* 2.* 1.8* 1.8* 6.31 3. 4.* 2. 3. 1. 1.* 4.2* 4.* 2. 4.* 1.* 1.* 4.* 4.* 3.3 4.* 1.* 1.* 6.3 3. * 2. 3. 1.* 1.* 4.2* * 2. 3.8* 1.* 1.* * * 3.3 3.8* 1.* 1.*.14 3. 6..* 3..6 2. 3. 1. 2.*.4.* 4.1.8* 2.6 * 1.8 2.*.*.*.*.8* 3.3 * 2.* 2.*.3 3. 6. 8.6* 3.8.6 2. 3. 1.6 2.* 1.6 1.8*.4 8.6* 4.1.6* 2.6 4.4* 1. 2.* 1. 1.8* 8.6* 8.6*..6* 3.3 4.4* 2.* 2.* 1.8* 1.8* 6 6.8.8* 3.8.* 2.4 3.6 1.6 2.1*.2*.8* 4. 6.* 2. 4.8* 1. 2.1*.1.8* 4. 6.* 3.2 4.8* 2.1* 2.1*.4 6..* 3.8.4 2.4 3.6* 1.6 2.4 1.*.2.* 4. 6.4* 2.6 4.* 1. 2.* 1.6 1.*..* 4. 6.4* 3.2 4.* 2.2 2.* 1.* 1.*.6 6. 1.4 3.6.* 2.2 3. 1.6 2.*.2 * 3. 6.* 2.4 4.8* 1. 2.*.2 * 4. 6.* 3.1 4.8* 2.2 2.*.2 6. 1.4 3.. 2.3 3. 2.2*.3 1.4* 3. 6.6* 2.4 4.8* 1.6 2.2*.1 1.4* 4. 6.6* 3.1 4.8* 2.1 2.2*.4 6.3 1.* 3.4.3 2.1 3.3 1.8 2.8 6. 1.8* 3.6 6.8* 2.3 4.6* 1. 3.2*.1 1.8* 4. 6.8* 2. 4.6* 2. 3.2* 6.68 6.3 1.6* 3.4.4 2.1 3.3 1. 2. 6. 1.8* 3. 6.* 2.3 4.* 1.8 2.8*.1 1.8* 4. 6.* 2. 4.* 2.3 2.8* 6. 3. 6.1 1.4* 3.2.1 2.3 3.1* 6.6 1.4* 3.4.* 2.4 3.1* 8.8 1.4* 4.4.* 3.1* 3.1*.64 3. 6.1 1.6 3.2.1 2.1 3.1* 6.6 1.* 3.4 6.1* 2.3 3.1* 8.8 1.* 4.4 6.1* 2. 3.1*. Stick 2.6 m 3. m m 6. m m. 6. 3. 2.8* 2.8* 1.* 1.* 2.8* 2.8* 1.* 1.* 2.8* 2.8* 1.* 1.* 3.4* 3.4* 2. 2.* 3.4* 3.4* 2. 2.* 3.4* 3.4* 2.* 2.* 3. 4.* 2. 3.6* 4.* 4.* 2. 3.6* 4.* 4.* 3.3 3.6* 6. 8.2* 3.8.* 2. 3. 1.6 2.* 1.6*.4 8.2* 4.1.* 2. 4.3* 1. 2.* 1.6 1.6* 8.2* 8.2* 4..* 3.3 4.3* 2.2 2.* 6..* 3.8.4* 2.4 3.6 1.6 2.4 1.4 1.8*.2.* 4.* 6.3* 2.6* 4.6* 1. 3.1* 1.8*..* 4. 6.3* 3.2 4.6* 2.2 3.1* 1.8* 1.8*.18 6..3.6.86 6. 1.3* 3..4 2.3 3. 2.4 1.4 2.*.2* 1.3* 3. 6.6* 2.4 4.8* 1.6 2.8* 1.6 2.*. 1.3* 4. 6.6* 3.1 4.8* 2.1 2.8* 2.* 2.*.6 3. 6.3 * 3..4 2.1 3.3 1.6 2.* 6. 1.* 3. 6.* 2.3 4.8* 1. 2.*.1 1.* 4. 6.* 2. 4.8* 2.2 2.* 6.1 1. 3.2.1 2. 3.2 2. 3.* 6. 1.* 3.4 6.4* 2.2 3.4* 2.1 3.* 8. 1.* 4.4 6.4* 2.8 3.4* 2. 3.*.11 6.1 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. A 314 Litronic A 316 Litronic 1

Lift Capacities A 316 litronic` with Hydr. Adjustable Boom 3.4 m Stick 2.2 m 3. m m 6. m m. 6. 3. 3. 3.* 3.* 2.* 2.* 3.* 3.* 2.* 2.* 3.* 3.* 2.* 2.* 3.* 3.* 2.* 2.* 3.* 3.* 2.6 2.8* 1.8* 1.8* 3.* 3.* 2.8* 2.8* 1.8* 1.8* 3.* 3.* 2.8* 2.8* 1.8* 1.8* 3.* 3.* 2.8* 2.8* 1.8* 1.8*.*.* 4.2 4.* 2. 4.1 1.* 1.*.*.* 4.6 4.* 2. 4.1* 1.* 1.*.*.* 4.* 4.* 3.6 4.1* 1.* 1.*.*.* 4.* 4.* 4.1* 4.1* 1.* 1.*.2 1.* 4. 6.3 2.6 4.1 1. 2.4* 1.6 1.* 8. 1.* * 6.8* 2..2* 1. 2.4* 1.* 1.* 1. 1.*.4 6.8* 3.6.2* 2.4 2.4* 1.* 1.* 1.* 1.* 6.6* 6.8* 4.3.2* 2.4* 2.4* 1.* 1.*.1* 1.* 4. 6.2 2. 4. 1.6 2. 1.8*.8 1.* 4.4.6* 2.8.6* 1.8 3.1* 1. 1.8*.8 1.*.4.6* 3..6* 2.3 3.1* 1.8* 1.8* 1.* 1.* 6..6* 4.3.6* 2. 3.1* 1.8* 1.8* 6. 11.8 3.8 6.2 2.4 3. 2.* 2.1*.8 11.* 4.2.8* 2.6.6* 1. 2.* 1. 2.1*. 11.*.4.8* 3.3.6* 2.2 2.* 2.1* 2.1* 11.* 11.* 6..8* 4.1.6* 2.* 2.* 2.1* 2.1* 6. 12.1 3.6 6. 2.2 3. 1. 2.6*.3 12.* 4..* 2..6* 1. 2.6*. 12.*.1.* 3.2.6* 2.4 2.6* 12.6 12.* 6.4.* 4..6* 2.6* 2.6* 6.3 12. 3.3.8 2.1 3.* 2.1 3.4*.1 12.8* 3..3* 2.4 3.* 2.4 3.4*. 12.8* 4.8.3* 3.1 3.* 3.1 3.4* 12.8 12.8* 6.2.3* 3.* 3.* 3.4* 3.4*.3 6.43.24.66.6 6.1 6.3 Stick 2.4 m 3. m m 6. m m. 6. 3. 3. 3.1* 3.1* 1.8* 1.8* 3.1* 3.1* 1.8* 1.8* 3.1* 3.1* 1.8* 1.8* 3.1* 3.1* 1.8* 1.8* 3.6* 3.6* 2.6 2.* 3.6* 3.6* 2. 2.* 3.6* 3.6* 2.* 2.* 3.6* 3.6* 2.* 2.* 4.2 4.4* 2.* 3.* * * 4.4* 4.4* 2. 3.* * * 4.4* 4.4* 3.6 3.* * * 4.4* 4.4* 3.* 3.* * *.3 1.4* 4. 6.3 2.6 4.1 1. 2.8 1.6* 8. 1.4* * 6.6* 2..1* 1. 2.8* 1.* 1.4*.4 6.6* 3.6.1* 2.4 2.8* 1.4* 1.4* 6.6 6.6* 4.3.1* 2.8* 2.8*.1* 1.6* 4. 6.2* 2.6 4. 1.6 2. 1.4 1.*.8* 1.6* 4.4 * 2.8.* 1.8 3.* 1.6 1.*.8* 1.6*.3 * 3..* 2.3 3.* 1.* 1.* 6. * 4.3.* 2. 3.* 1.* 1.* 6. 1* 3.8 6.2 2.4 3. 2.6 1.4 1.*.8 1* 4.3.* 2.6.6* 1. 3.2* 1.6 1.*.8 1*.4.* 3.3.6* 2.2 3.2* 1.* 1.* 1* 1* 6.*.* 4.1.6* 2.8 3.2* 1.* 1.* 6. 12.* 3.6 6.1 2.2 3. 1.6 2.3*.3 12.6* 4..8* 2..6* 1.8 2.3*. 12.6*.1*.8* 3.2.6* 2.3* 2.3* 12. 12.6* 6.4.8* 4..6* 2.3* 2.3* 6.3 12.1 3.3.8 2.1 3.6 1. 3.2*.2 13.* 3..6* 2.4 4.1* 2.2 3.2*.6 13.* 4.8.6* 3.1 4.1* 2. 3.2* 12. 13.* 6.2.6* 3. 4.1* 3.2* 3.2*.33 6.66.4.86.6.6.23 6.28 Stick 2.6 m 3. m m 6. m m. 6. 3. 3. 3.* 3.* 3.* 3.* 3.* 3.* 3.* 3.* 3.3* 3.3* 2. 2.* 1.4* 1.4* 3.3* 3.3* 2.* 2.* 1.4* 1.4* 3.3* 3.3* 2.* 2.* 1.4* 1.4* 3.3* 3.3* 2.* 2.* 1.4* 1.4* 3.* 3.* 2. 3.6* 1. 1.* 1.4* 1.4* 3.* 3.* 2.* 3.6* 1.* 1.* 1.4* 1.4* 3.* 3.* 3.6 3.6* 1.* 1.* 1.4* 1.4* 3.* 3.* 3.6* 3.6* 1.* 1.* 1.4* 1.4*.3.* 4.1 6.3* 2. 4.1 1. 2.8 1.4* 1.4* 8.1.* 4.4 6.4* 2..* 1. 2.* 1.4* 1.4*.*.*.4 6.4* 3.6.* 2.4 2.* 1.4* 1.4*.*.* 6.4* 6.4* 4.3.* 2.* 2.* 1.4* 1.4*. 1.6* 3. 6.1* 2.6 4. 1.6 2. 1.3 *.8 1.6* 4.3*.4* 2.8.4* 1.8 3.6* * *. 1.6*.3.4* 3..4* 2.3 3.6* * * 6.4*.4* 4.3.4* 2. 3.6* * *. 1* 3.8 6.1 2.4 3. 2.6 1.4 1.*.8 1* 4.3.* 2..* 1. 3.* 1.*.8* 1*.3.* 3.4.* 2.2 3.* 1.* 1.* 1* 1* 6.4*.* 4.1.* 2.8 3.* 1.* 1.* 6. 11. 3.6 6.1 2.2 3. 2.*.3 12.* 4..8* 2..6* 1. 2.*. 12.*.1.8* 3.2.6* 2.* 2.* 12.4 12.* 6..8* 4..6* 2.* 2.* 6.3 12.1 3.3.8 2.1 3.6 1.8 2.8*.2 13.* 3..8* 2.3 * 2. 2.8*.6 13.* 4.8.8* 3. * 2. 2.8* 12. 13.* 6.2.8* 3. * 2.8* 2.8* 6.1 8.* 4.4 6.1* 6. 8.*. 6.1* 8.* 8.* 6.1* 6.1* 8.* 8.* 6.1* 6.1*.63 6..66 8.6 8.1.6.44 6.3 3.6 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. 18 A 314 Litronic A 316 Litronic

Lift Capacities A 316 litronic` with Hydr. Adjustable Boom 3.4 m EW-Undercarriage Stick 2.2 m 3. m m 6. m m. Stick 2.4 m 3. m m 6. m m. 3.* 3.* 2.* 2.* 3.* 3.* 2.* 2.* 3.* 3.* 2.* 2.*.3 3.1* 3.1* 1.8* 1.8* 3.1* 3.1* 1.8* 1.8* 3.1* 3.1* 1.8* 1.8*.33 6. 3.* 3.* 2.8* 2.8* 1.8* 1.8* 3.* 3.* 2.8* 2.8* 1.8* 1.8* 3.* 3.* 2.8* 2.8* 1.8* 1.8* 6.43 6. 3.6* 3.6* 2. 2.* 3.6* 3.6* 2.* 2.* 3.6* 3.6* 2.* 2.* 6.66.*.* 4.6 4.* 2. 4.1 1.* 1.*.*.* 4.* 4.* 3.2 4.1* 1.* 1.*.*.* 4.* 4.* 3. 4.1* 1.* 1.*.24 4.4* 4.4* 2. 3.* * * 4.4* 4.4* 3.2 3.* * * 4.4* 4.4* 3. 3.* * *.4 3. 8.* 1.* 6.3 2. 4.1 1.8 2.4* 1.* 1.* 8.8 1.* 4. 6.8* 3.2.2* 2.1 2.4* 1.* 1.* 1.3 1.*.6 6.8* 3.6.2* 2.4 2.4* 1.* 1.*.66 3. 8. 1.4* 4.4 6.3 2. 4.1 1. 2.8 8.8 1.4* 4.8* 6.6* 3.2.1* 2.1 2.8* 1.4 1.4*.6 6.6* 3.6.1* 2.4 2.8*.86.8 1.* 4.4 6.2 2.8 4. 1.8 2. 1. 1.8* 8. 1.* 4.8.6* 3.1.6* 2. 3.1* 1.8* 1.8* 1.2 1.*.*.6* 3..6* 2.4 3.1* 1.8* 1.8*.6.8* 1.6* 4.4 6.2* 2.8 4.1 1.8 2. 1.6 1.* 8.6 1.6* 4.8 * 3.1.* 2. 3.* 1.* 1.* 1.1 1.6*.* * 3.6.* 2.4 3.* 1.* 1.*.6. 11. 4.2 6.2 2.6 3. 1. 2.* 1. 2.1* 8. 11.* 4..8* 2..6* 1. 2.* 1. 2.1* 1.3 11.*..8* 3.4.6* 2.3 2.* 2.1* 2.1* 6.8 1* 4.2 6.2* 2.6 3. 1. 2.6 1.6 1.* 8.* 1* 4..* 2.*.6* 1. 3.2* 1.8 1.* 1.2 1*..* 3.4.6* 2.3 3.2* 1.* 1.*.6.3 12.2 4. 6.1 2.4 3. 1. 2.6* 8.3 12.* 4.4.* 2..6* 2.1 2.6* 1.2 12.*.2.* 3.2.6* 2. 2.6*.1.3 12.1 4. 6.1 2.4 3. 1.8 2.3* 8.3 12.6*.8* 2..6* 2. 2.3* 1.2 12.6*.3.8* 3.2.6* 2.3* 2.3*.23 3..1 12.1 3..8 2.4 3.* 2.3 3.4* 8.1 12.8* 4.2.3* 2. 3.* 2.6 3.4*. 12.8*..3* 3.2 3.* 3.1 3.4* 6.3 3..2 12.1 3..8 2.3 3.6 2.2 3.2* 8.2 13.* 4.2.6* 2.6 4.1* 2. 3.2* 1. 13.*..6* 3.1 4.1* 2. 3.2* 6.28 Stick 2.6 m 3. m m 6. m m. 6. 3. 3.* 3.* 3.* 3.* 3.* 3.* 3.3* 3.3* 2.* 2.* 1.4* 1.4* 3.3* 3.3* 2.* 2.* 1.4* 1.4* 3.3* 3.3* 2.* 2.* 1.4* 1.4* 3.* 3.* 2. 3.6* 1.* 1.* 1.4* 1.4* 3.* 3.* 3.2 3.6* 1.* 1.* 1.4* 1.4* 3.* 3.* 3.6 3.6* 1.* 1.* 1.4* 1.4* 8..* 4.4 6.3 2. 4.1 1. 2.8 1.4* 1.4* 8.8.* 4.8 6.4* 3.2.* 2.1 2.* 1.4* 1.4*.*.*. 6.4* 3..* 2.4 2.* 1.4* 1.4*. 1.6* 4.3 6.1* 2.8 4.1 1.8 2.* * * 8.6 1.6* 4..4* 3.1.4* 2. 3.6* * * 1. 1.6*.4.4* 3.6.4* 2.4 3.6* * *.63 6..66 8.6 8.1.8 1* 4.2 6.1 2.* 3. 1. 2.6 1.* 8.6 1* 4..* 2..* 1. 3.* 1.* 1.* 1.1 1*.4.* 3.4.* 2.3 3.* 1.* 1.*.6 3..3 12.* 4. 6.1 2. 3. 1. 2.* 8.3 12.*.8* 2.8.6* 1. 2.* 1.2 12.*.3.8* 3.2.6* 2.* 2.*.2 12.1 3..8 2.3 3.6 2. 2.8* 8.2 13.* 4.2.8* 2.6 * 2.3 2.8* 1. 13.*..8* 3.1 * 2. 2.8* 6. 8.* 4. 6.1*. 8.*.6 6.1* 8.* 8.* 6.1* 6.1*.44 6.3 3.6 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. A 314 Litronic A 316 Litronic 1

Backhoe Attachment A 314 litronic` with Gooseneck Boom m ft 2 2 1 m 8 6 4 Digging Envelope with Quick Change Adapter 1 2 3 Stick length m 2.2 2.4 2.6 Max. digging depth m..2.4 Max. reach at ground level m 8. 8.2 8.4 Max. dumping height m..6. Max. teeth height m 8.1 8.2 8.3 Min. attachment radius m 2. 2. 2. 1 3 2 1 Digging Forces without Quick Change Adapter 1 2 3 Max. digging force (ISO 61) kn 6. 63.8 6.1 t 6. 6. 6.1 Max. breakout force (ISO 61) kn.1.1.1 t 8.1 8.1 8.1 - -1-1 -2-3 Max. breakout force with ripper bucket 111.3 kn (11.3 t) Max. possible digging force (stick 1. m) 82. kn ( 8. t) Operating -1-4 - -6 8 2 6 2 1 1 23 4 3 1 2 1 m ft The operating weight includes the basic machine with 8 tires plus spacer rings, gooseneck boom m, stick 2.2 m, quick change adapter 33 and bucket 8 mm/. m 3. Undercarriage versions A 314 litronic` with stabilizer blade A 314 litronic` with 2 pt. outriggers A 314 litronic` with stabilizer blade + 2 pt. outriggers A 314 EW litronic` with stabilizer blade A 314 EW litronic` with 2 pt. outriggers 14,4 kg 14, kg 1,6 kg 14, kg 14,8 kg Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) mm m 3 kg 3 2).1 22 4 2).24 2 2).28 2 2).2 26 6 2).36 2 8 2). 34 1, 2).6 38 1,2 2).8 43 3 3).18 21 4 3).26 24 3).3 24 3).31 2 6 3).3 2 8 3).3 32 1, 3).1 3 1,2 3).8 42 Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 V V y Y Y Y Y Y Y Y Y Y V V y Y Y Y Y Y Y Y Y V Y Y Y Y Y Y Y Y Y Y Y V Y Y Y Y Y Y V y y V Y V Y Y V Y Y V V y y V Y V Y Y V * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) Bucket with teeth (also available in HD-version) 3) Bucket with cutting lip (also available in HD-version) Buckets up to 4 mm cutting width with limited digging depth Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized 2 A 314 Litronic A 316 Litronic

Backhoe Attachment A 316 litronic` with Gooseneck Boom. m ft 3 2 2 1 1 m 1 8 6 4 3 Digging Envelope with Quick Change Adapter 1 2 3 Löffelstiellänge m 2.2 2.4 2.6 Max. Grabtiefe m... Max. Reichweite auf Grundniveau m 8. 8..1 Max. Ausschütthöhe m 6.2 6.3 6.4 Max. Reichhöhe m 8...2 Min. attachment radius m 3.2 3. 3. Digging Forces without Quick Change Adapter 1 2 3 - -1-1 -2 2 1-1 -2-3 -4 - -6-1 3 8 2 6 2 1 23 4 1 3 1 2 1 m ft Max. digging force (ISO 61) kn 6. 6.4 6 t.1 6. 6.3 Max. breakout force (ISO 61) kn 1. 1. 1. t 1. 1. 1. Max. breakout force with ripper bucket 114. kn (11.6 t) Max. possible digging force (stick 1. m) 8.8 kn ( 8.8 t) Operating The operating weight includes the basic machine with 8 tires plus spacer rings, gooseneck boom. m, stick 2.2 m, quick change adapter 33 and bucket 8 mm/.6 m 3. Undercarriage versions A 316 litronic` with stabilizer blade A 316 litronic` with 2 pt. outriggers A 316 litronic` with stabilizer blade + 2 pt. outriggers A 316 EW litronic` with stabilizer blade A 316 EW litronic` with 2 pt. outriggers 16,3 kg 16, kg 1,3 kg 16,4 kg 16,6 kg Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) mm m 3 kg 3 2).1 22 4 2).24 2 2).3 2 6 2).4 3 8 2).6 4 1, 2).8 48 1,2 2). 2 3 3).18 21 4 3).26 24 3).32 2 6 3).4 33 8 3).6 38 1, 3).8 46 1,2 3) Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 V V y Y V y Y V y Y V y Y V y Y V y Y V y y y y V y y V y y V y y V y y V y y V y y y V y Y V y Y V y Y V y Y V y Y V y Y V y v y v y y v y y v y y v y y v y y v y y v * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) Bucket with teeth (also available in HD-version) 3) Bucket with cutting lip (also available in HD-version) Buckets up to 4 mm cutting width with limited digging depth Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized A 314 Litronic A 316 Litronic 21

Lift Capacities A 314 litronic` with Gooseneck Boom m Stick 2.2 m 3. m m 6. m m. 6. 3. 3. 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.* 2.2 3.* 1.* 1.* 2.4 3.* 1.* 1.* 3.* 3.* 1.* 1.* 3.* 3.* 1.* 1.*..2* 3.2.* 2.1 3. 1. 2.* 6..2* 3.6.* 2.3 4.1* 1. 2.*.2*.2* 4.6.* 2. 4.1* 2.* 2.*.2*.2*.*.* 3. 4.1* 2.* 2.*.2 8.6* 3..2 2. 3.4 1.6 2.2*. 8.6* 3.3 6.1* 2.2 4.6* 1.8 2.2* 8. 8.6* 4.3 6.1* 2.8 4.6* 2.2* 2.2* 8.6* 8.6*. 6.1* 3.6 4.6* 2.2* 2.2* 4..* 2.8. 1. 3.3 1.6 2.*..* 3.2 6.* 2.1 4.* 1.8 2.*..* 4.1 6.* 2. 4.* 2.3 2.*.*.*.3 6.* 3. 4.* 2.* 2.* 4.. 2. 4. 1. 3.2 1.8 3.1. 1.* 3.1 6.6* 2.1 4.* 2. 3.*. 1.* 4. 6.6* 2. 4.* 2.6 3.* 1.* 1.*.3 6.6* 3. 4.* 3.4 3.*. 8.1* 2.8. 2.4 4.3.8 8.1* 3.1.4* 2.8 4.*.8 8.1* 4.1.4* 3.6 4.* 8.1* 8.1*.3.4* 4.6 4.*.46 6.4 6.88 6. 6.6 6.14 4. Stick 2.4 m 3. m m 6. m m. 6. 3. 3. 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 2.2 3.1* 1.* 1.* 2.4 3.1* 1.* 1.* 3. 3.1* 1.* 1.* 3.1* 3.1* 1.* 1.* 6. 6.* 3.2 4.8* 2.1 3. 1.6 1.8* 6.* 6.* 3.6 4.8* 2.3 4.* 1.8 1.8* 6.* 6.* 4.6 4.8* 2. 4.* 1.8* 1.8* 6.* 6.* 4.8* 4.8* 3. 4.* 1.8* 1.8*.2.* 3..2 2. 3.4 2.* 6..* 3.3.* 2.2 * 1. 2.* 8..* 4.3.* 2.8 * 2.* 2.*.*.*..* 3.6 * 2.* 2.* 4..* 2.8. 1. 3.2 2.4*..* 3.1 6.6* 2.1 4.8* 1. 2.4*..* 4.1 6.6* 2. 4.8* 2.2 2.4*.*.*.3 6.6* 3. 4.8* 2.4* 2.4* 4..8 2. 4. 1.8 3.2 1. 3..6 1.1* 3.1 6.6* 2.1 4.* 1. 3.2*.6 1.1* 4. 6.6* 2. 4.* 2. 3.2* 1.1* 1.1*.2 6.6* 3.4 4.* 3.2 3.2*. 8.4* 2. 4. 2.2 3.. 8.4* 3.1.6* 2. 4.6*. 8.4* 4..6* 3.3 4.6* 8.4* 8.4*.3.6* 4.2 4.6*.1 6.61..18 6. 6.3.24 Stick 2.6 m 3. m m 6. m m. 6. 3. 3. 2.2 3.1* 2.4 3.1* 3.1 3.1* 3.1* 3.1* 3.2 4.6* 2.1 3. 1.* 3.6 4.6* 2.3 3.* 1.* 1.* 4.6* 4.6* 3. 3.* 1.* 1.* 4.6* 4.6* 3. 3.* 1.* 1.*.3.4* 3..2 2. 3.4 1.4 1.8* 6..4* 3.3.* 2.2 4.4* 1.6 1.8* 8.1.4* 4.3.* 2.8 4.4* 1.8* 1.8*.4*.4*.6.* 3.6 4.4* 1.8* 1.8* 4. 8.* 2.8. 1. 3.2 1.4 2.1*.6 8.* 3.1 6.* 2.1 4.8* 1.6 2.1*.6 8.* 4.1 6.* 2. 4.8* 2.1 2.1* 8.* 8.*.3 6.* 3. 4.8* 2.1* 2.1* 4.8.* 2. 4. 1.8 3.2 1.6 2.8.6.* 3. 6.6* 2.1 4.* 1.8 2.8*.6.* 4. 6.6* 2. 4.* 2.4 2.8*.*.*.2 6.6* 3.4 4.* 2.8* 2.8* 4. 8.* 2. 4. 2.1 3.6. 8.* 3.1.8* 2.3 4.4*. 8.* 4..8* 3. 4.4* 8.* 8.*.2.8* 3. 4.4*. 6.82.2.3.1 6.. Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. 22 A 314 Litronic A 316 Litronic

Lift Capacities A 314 litronic` with Gooseneck Boom m EW-Undercarriage Stick 2.2 m 3. m m 6. m m. Stick 2.4 m 3. m m 6. m m. 6. 2.* 2.* 2.* 2.* 2.* 2.*.46 6. 1.8* 1.8* 1.8* 1.8* 1.8* 1.8*.1 2.4 3.* 1.* 1.* 2.6 3.* 1.* 1.* 3.* 3.* 1.* 1.* 6.4 2.4 3.1* 1.* 1.* 2.6 3.1* 1.* 1.* 3.1* 3.1* 1.* 1.* 6.61 3. 6..2* 3.6.* 2.3 3. 1. 2.*.2*.2* 3..* 2. 4.1* 2.* 2.*.2*.2* 4..* 3.1 4.1* 2.* 2.* 6.88 3. 6.* 6.* 3.6 4.8* 2.3 3.6 1.8 1.8* 6.* 6.* 3. 4.8* 2. 4.* 1.8* 1.8* 6.* 6.* 4.8* 4.8* 3.1 4.* 1.8* 1.8*. 6. 8.6* 3.4.3 2.2 3.4 1.8 2.2* 6. 8.6* 3.6 6.1* 2.4 4.6* 1. 2.2* 8.6* 8.6* 4.6 6.1* 3. 4.6* 2.2* 2.2* 6. 6..8* 3.4.3 2.2 3.4 1. 2.* 6.6.8* 3.6.* 2.4 * 1.8 2.* 8..8* 4.6.* 3. * 2.* 2.*.18..* 3.2.1 2.1 3.3 1.8 2.* 6.2.* 3.4 6.* 2.3 4.* 2. 2.*.*.* 4.4 6.* 2. 4.* 2. 2.* 6.6..* 3.2.1 2.1 3.3 1. 2.4* 6.2.* 3.4 6.6* 2.3 4.8* 1. 2.4*.*.* 4.4 6.6* 2. 4.8* 2.4 2.4* 6.. 1.* 3.1. 2.1 3.3 2.1 3.2 6.2 1.* 3.4 6.6* 2.3 4.* 2.2 3.* 8.4 1.* 4.4 6.6* 2. 4.* 2.8 3.* 6.14. 1. 3.1. 2.1 3.3 1. 3. 6.2 1.1* 3.3 6.6* 2.3 4.* 2.1 3.2* 8.3 1.1* 4.3 6.6* 2. 4.* 2. 3.2* 6.3 3..8 8.1* 3.2.1 2.8 4.4 6.4 8.1* 3.4.4* 3. 4.* 8.1* 8.1* 4.4.4* 3.8 4.* 4. 3..8 8.4* 3.1. 2.6 4. 6.3 8.4* 3.4.6* 2. 4.6* 8.4* 8.4* 4.4.6* 3. 4.6*.24 Stick 2.6 m 3. m m 6. m m. 6. 3. 2.4 3.1* 2.6 3.1* 3.1* 3.1* 3.6 4.6* 2.3 3.6 1.* 1.* 3. 4.6* 2. 3.* 1.* 1.* 4.6* 4.6* 3.2 3.* 1.* 1.* 6.1.4* 3.4.3 2.2 3.4 1.6 1.8* 6.6.4* 3.6.8* 2.4 4.4* 1.8 1.8* 8.8.4* 4.6.8* 3. 4.4* 1.8* 1.8*. 6.82.2.3. 8.* 3.2.1 2.1 3.3 1. 2.1* 6.2 8.* 3.4 6.* 2.3 4.8* 1.8 2.1* 8.* 8.* 4.4 6.* 2. 4.8* 2.1* 2.1*.1 3..6.* 3.1. 2.1 3.3 1.8 2.8* 6.1.* 3.3 6.6* 2.2 4.* 2. 2.8* 8.3.* 4.3 6.6* 2. 4.* 2. 2.8*. 8.* 3.1. 2.4 3. 6.2 8.* 3.3.8* 2. * 8.4 8.* 4.3.8* 3.3 * 6.. Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. A 314 Litronic A 316 Litronic 23

Lift Capacities A 316 litronic` with Gooseneck Boom. m Stick 2.2 m 3. m m 6. m m. 6. 3. 3. 2.4* 2.4* 1.* 1.* 2.4* 2.4* 1.* 1.* 2.4* 2.4* 1.* 1.* 2.4* 2.4* 1.* 1.* 3. 4.2* 2. 3.* 1.* 1.* 4.2* 4.2* 2. 3.* 1.* 1.* 4.2* 4.2* 3. 3.* 1.* 1.* 4.2* 4.2* 3.* 3.* 1.* 1.* 6.4 8.8* 3.6.* 2.3 3. 1.6 1.8* 1.6 1.*.3 8.8* 4..* 2.6 4.4* 1.8 1.8* 1.* 1.* 8.8* 8.8*.1.* 3.3 4.4* 1.8* 1.8* 1.* 1.* 8.8* 8.8*.*.* 4.1 4.4* 1.8* 1.8* 1.* 1.* 3.2.6 2.2 3. 1.6 2.* 1.* 3.6 6.8* 2.4.1* 1.8 2.* 1. 1.* 4. 6.8* 3.1.1* 2.3 2.* 1.* 1.* 6. 6.8* 3..1* 2.* 2.* 1.* 1.*.1*.1* 3..4 2.1 3.6 2.2*.1*.1* 3.4.6* 2.3.* 1. 2.2*.1*.1*.6* 3..* 2.2* 2.2*.1*.1*.8.6* 3.8.* 2.2* 2.2*..8* 3..4 2. 3. 1. 2.8* 6.3.8* 3.4.6* 2.3.* 1. 2.8*.8*.8* 4.4.6* 3..* 2. 2.8*.8*.8*..6* 3.8.* 2.8* 2.8*.6 1.* 3.1.4 2.2 3. 6. 1.* 3. 6.8* 2.4 4.4* 8. 1.* 6.8* 3.2 4.4* 1.* 1.*.8 6.8* 4. 4.4* 6.26. 3.63.42 6.86.8 Stick 2.4 m 3. m m 6. m m. 6. 3. 3. 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 2.6 2.6* 2.6* 2.6* 2.6* 2.6* 2.6* 2.6* 2. 3.8* * * 2.8 3.8* * * 3. 3.8* * * 3.8* 3.8* * * 6.6 8.1* 3.6.3* 2.3 3. 1.6 2.3* 1.6*.4 8.1* 4..3* 2.6 4.3* 1.8 2.3* 8.1* 8.1*.1.3* 3.3 4.3* 2.3 2.3* 8.1* 8.1*.3*.3* 4.1 4.3* 2.3* 2.3* 4.4* 4.4* 3.2.6 2.2 3. 2.6 1.4 1.* 4.4* 4.4* 3.6 6.* 2.4 4.* 1. 3.* 1.6 1.* 4.4* 4.4* 4. 6.* 3.1 4.* 2.2 3.* 1.* 1.* 4.4* 4.4* 6. 6.* 3. 4.* 2.8 3.* 1.* 1.*.1*.1* 3..4 2. 3. 2.6 2.*.1*.1* 3.4 * 2.3.4* 1. 2.6* 1. 2.*.1*.1* * 3..4* 2.2 2.6* 2.* 2.*.1*.1*.8 * 3.8.4* 2.6* 2.6* 2.* 2.*.4.4* 2..3 2. 3. 1.6 2.* 6.2.4* 3.3.6* 2.3.* 1.8 2.*.4*.4* 4.4.6* 2..* 2.4 2.*.4*.4*..6* 3..* 2.* 2.*. 1.3* 3..4 2.1 3.6 2. 3. 6.4 1.3* 3.4 6.* 2.3 4.* 2.3 3.* 8.6 1.3* 6.* 3. 4.* 2. 3.* 1.3* 1.3*.8 6.* 3.8 4.* 3.* 3.* 3.3 4.* 3.8 4.* 4. 4.* 4.* 4.*.12 6..3.2.82.61. 6.1 4.41 Stick 2.6 m 3. m m 6. m m. 6. 3. 3. 2.6 2.* 1.4* 1.4* 2.* 2.* 1.4* 1.4* 2.* 2.* 1.4* 1.4* 2.* 2.* 1.4* 1.4* 2. 3.* 1.4* 1.4* 1.4* 1.4* 2.8 3.* 1.4* 1.4* 1.4* 1.4* 3. 3.* 1.4* 1.4* 1.4* 1.4* 3.* 3.* 1.4* 1.4* 1.4* 1.4* 6. * 3.6.* 2.3 3. 1.6 2.6* 1.4* 1.4* * * 4.1.* 2.6 4.2* 1.8 2.6* 1.4* 1.4* * *.*.* 3.3 4.2* 2.3 2.6* 1.4* 1.4* * *.*.* 4.1 4.2* 2.6* 2.6* 1.4* 1.4*.2*.2* 3.2. 2.2 3. 2.6 1.4 *.2*.2* 3.6 6.* 2.4 4.8* 1. 3.3* * *.2*.2* 4. 6.* 3.1 4.8* 2.2 3.3* * *.2*.2* 6.1 6.* 3. 4.8* 2.8 3.3* * *.2*.2* 3..4 2. 3. 2.6 1.4 1.*.2*.2* 3.4.4* 2.3.3* 1. 3.2* 1.6 1.*.2*.2*.4* 3..3* 2.2 3.2* 1.* 1.*.2*.2*.8.4* 3.8.3* 2. 3.2* 1.* 1.*.3.1* 2..3 2. 3. 2.2* 6.1.1* 3.3.6* 2.2.* 1. 2.2*.1*.1* 4.4.6* 2..* 2.2* 2.2*.1*.1*..6* 3..* 2.2* 2.2*. 1.4* 3..3 2. 3. 1. 3.1* 6.3 1.4* 3.4.* 2.3.* 2.1 3.1* 8. 1.4* 4.4.* 3..* 2. 3.1* 1.4* 1.4*..* 3.8.* 3.1* 3.1*.8.8* 3.2.2* 2. 4.8* 6.6.8* 3.6.2* 3.3 4.8*.8*.8* 4.6.2* 4.3 4.8*.8*.8*.2*.2* 4.8* 4.8*.41 6.3 1.2 8.1.81.2 6.3 4.6 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. 24 A 314 Litronic A 316 Litronic

Lift Capacities A 316 litronic` with Gooseneck Boom. m EW-Undercarriage Stick 2.2 m 3. m m 6. m m. Stick 2.4 m 3. m m 6. m m. 1.8* 1.8* 1.8* 1.8* 1.8* 1.8*.12 6. 2.4* 2.4* 1.* 1.* 2.4* 2.4* 1.* 1.* 2.4* 2.4* 1.* 1.* 6.26 6. 2.6* 2.6* 2.6* 2.6* 2.6* 2.6* 6. 4.2* 4.2* 2. 3.* 1.* 1.* 4.2* 4.2* 3. 3.* 1.* 1.* 4.2* 4.2* 3. 3.* 1.* 1.*. 2. 3.8* * * 3. 3.8* * * 3. 3.8* * *.3 3..2 8.8* 4..* 2.6 3. 1.8 1.8* 1.* 1.* 8.2 8.8* 4.4.* 2. 4.4* 1.8* 1.8* 1.* 1.* 8.8* 8.8*.2.* 3.4 4.4* 1.8* 1.8* 1.* 1.* 3 3..4 8.1* 4..3* 2.6 3. 1.8 2.3* 8.1* 8.1*.3* 2. 4.3* 2. 2.3* 8.1* 8.1*.3.3* 3.4 4.3* 2.3* 2.3*.2 3.6. 2.4 3. 1. 2.* 1. 1.* 4.1 6.8* 2..1* 2. 2.* 1.* 1.* 4.8 6.8* 3.2.1* 2.3 2.* 1.* 1.*.63 4.4* 4.4* 3.6. 2.4 3. 1. 2.6 1.6 1.* 4.4* 4.4* 4.1 6.* 2. 4.* 1. 3.* 1.* 1.* 4.4* 4.4* 4. 6.* 3.2 4.* 2.3 3.* 1.* 1.*.82.1*.1* 3.4.4 2.3 3.6 1. 2.2*.1*.1* 3..6* 2.6.* 1. 2.2*.1*.1* 4.6.6* 3.1.* 2.2* 2.2*.42.1*.1* 3.4.4 2.3 3.6 1. 2.6* 1.6 2.*.1*.1* 3.8 * 2.6.4* 1. 2.6* 1.8 2.*.1*.1* 4.6 * 3.1.4* 2.2 2.6* 2.* 2.*.61 6.2.8* 3.4.4 2.3 3. 1. 2.8*.2.8* 3.8.6* 2.6.* 2.2 2.8*.8*.8* 4.6.6* 3..* 2.6 2.8* 6.86 6.2.4* 3.3.3 2.2 3. 1.8 2.*.1.4* 3.8.6* 2..* 2. 2.*.4*.4*.6* 3..* 2.4 2.*. 3. 6.4 1.* 3.4. 2.4 3..4 1.* 3. 6.8* 2. 4.4*.1 1.* 4. 6.8* 3.2 4.4*.8 3. 6.3 1.3* 3.4.4 2.3 3.6 2.3 3..3 1.3* 3.8 6.* 2.6 4.* 2. 3.*. 1.3* 4.6 6.* 3.1 4.* 3. 3.* 6.1 3. 4.* 4.2 4.* 4.* 4.* 4.41 Stick 2.6 m 3. m m 6. m m. 6. 3. 2.* 2.* 1.4* 1.4* 2.* 2.* 1.4* 1.4* 2.* 2.* 1.4* 1.4* 2.8 3.* 1.4* 1.4* 1.4* 1.4* 3.1 3.* 1.4* 1.4* 1.4* 1.4* 3.* 3.* 1.4* 1.4* 1.4* 1.4* * * 4..* 2.6 3. 1.8 2.6* 1.4* 1.4* * *.* 2. 4.2* 2. 2.6* 1.4* 1.4* * *.*.* 3.4 4.2* 2.4 2.6* 1.4* 1.4*.2*.2* 3.6. 2.4 3. 1. 2.6 * *.2*.2* 4.1 6.* 2. 4.8* 1. 3.3* * *.2*.2* 4. 6.* 3.2 4.8* 2.3 3.3* * *.41 6.3 1.2 8.1.2*.2* 3.4.4 2.3 3. 1.6 2.6 1.6 1.*.2*.2* 3.8.4* 2.6.3* 1. 3.2* 1.* 1.*.2*.2* 4.6.4* 3..3* 2.2 3.2* 1.* 1.*.81 3. 6.1.1* 3.3.3 2.2 3. 1. 2.2*..1* 3..6* 2..* 1. 2.2*.1*.1*.6* 3..* 2.2* 2.2* 6.2 1.4* 3.3.4 2.2 3. 2.1 3.1*.2 1.4* 3.8.* 2..* 2.4 3.1* 8. 1.4* 4.6.* 3..* 2.8 3.1* 6.6.8* 3..2* 3.3 4.8*.8* 4..2* 3. 4.8*.8*.8* 4.8.2* 4.4 4.8*.2 6.3 4.6 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. A 314 Litronic A 316 Litronic 2

Backhoe Attachment A 314 litronic` with Adjustable Up/Down Plus Offset Boom 3.3 m ft 3 m 11 1 Digging Envelope with Quick Change Adapter 4 6 3 Stick length m 2. 2.2 2.4 2 2 1 1 8 6 4 3 2 1 Max. digging depth m..2.4 Max. reach at ground level m 8.3 8. 8. Max. dumping height m 6. 6. 6.8 Max. teeth height m.3..6 Min. attachment radius m 3.1 2. 2.8 1 stick 2. m 4 stick 2. m 2 stick 2.2 m stick 2.2 m 3 stick 2.4 m 6 stick 2.4 m at max. attachment offset with set straight boom with vertical ditch walls - -1-1 -1-2 -3-4 - -6 1 8 6 1 23 4 3 4 6 2 1 m Digging Forces without Quick Change Adapter 4 6 Max. digging force (ISO 61 kn 6. 63.8 6.1 t 6. 6. 6.1 Max. breakout force (ISO 61) kn.1.1.1 t 8.1 8.1 8.1 Max. breakout force with ripper bucket 111.3 kn (11.3 t) Max. possible digging force (stick 1. m) 82. kn ( 8. t) 3 24 2 2 3 1 1 ft R 26 Operating The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable offset boom 3.3 m, stick 2.2 m, quick change adapter 33 and bucket 8 mm/. m 3. Undercarriage versions 24 3 A 314 litronic` with stabilizer blade A 314 litronic` with 2 pt. outriggers A 314 litronic` with stabilizer blade + 2 pt. outriggers A 314 EW litronic` with stabilizer blade A 314 EW litronic` with 2 pt. outriggers 1,4 kg 1,6 kg 16,6 kg 1, kg 1, kg Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) mm m 3 kg 2).2 26 6 2).36 2 8 2). 34 1, 2).6 38 1,2 2).8 43 3).31 2 6 3).3 2 8 3).3 32 1, 3).1 3 1,2 3).8 42 Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 V V y Y Y V Y Y Y Y Y Y Y V y Y Y V Y Y Y y y v V y y Y Y V Y Y V y y v V y y Y Y V V y y V V V Y Y Y Y Y Y V V y V V V Y Y Y v v v y y y Y Y V Y Y V y y v y y y Y Y V * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) Bucket with teeth (also available in HD-version) 3) Bucket with cutting lip (also available in HD-version) Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized 26 A 314 Litronic A 316 Litronic

Backhoe Attachment A 316 litronic` with Adjustable Up/Down Plus Offset Boom 3.6 m ft 3 m 11 1 Digging Envelope with Quick Change Adapter 3 4 3 Stick length m 2.2 2.4 2 2 1 1 - -1-1 -2 8 6 4 3 2 1-1 -2-3 -4 - -6 1 2 3 4 Max. digging depth m.. Max. reach at ground level m..2 Max. dumping height m.3 Max. teeth height m 1.2 1.3 Min. attachment radius m 2.8 2.8 1 stick 2.2 m 3 stick 2.2 m 2 stick 2.4 m 4 stick 2.4 m at max. attachment offset with set straight boom with vertical ditch walls Digging Forces without Quick Change Adapter 3 4 Max. digging force (ISO 61) kn 6. 6.4 t.1 6. Max. breakout force (ISO 61) kn 1. 1. t 1. 1. Max. breakout force with ripper bucket 114. kn (11.6 t) Max. possible digging force (stick 1. m) 8.8 kn ( 8.8 t) - 1 8 6 4 3 2 1 m Operating 3 2 2 1 44 1 ft R 226 The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable offset boom 3.6 m, stick 2.2 m, quick change adapter 33 and bucket 8 mm/.6 m 3. Undercarriage versions 24 24 A 316 litronic` with stabilizer blade A 316 litronic` with 2 pt. outriggers A 316 litronic` with stabilizer blade + 2 pt. outriggers A 316 EW litronic` with stabilizer blade A 316 EW litronic` with 2 pt. outriggers 1,3 kg 1, kg 18,3 kg 1,4 kg 1,6 kg 4 Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) mm m 3 kg 2).3 2 6 2).4 3 8 2).6 4 1, 2).8 48 1,2 2). 2 3).32 2 6 3).4 33 8 3).6 38 1, 3).8 46 1,2 3) Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V V Y Y Y Y Y Y Y Y Y Y Y Y y v y V V V V V y V V V V V v v y y y y y y y y y y y y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y V V Y Y Y Y Y Y Y Y Y Y Y Y y v y y V y V y y y V y V y v v v v y v y v v v y v y v * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) Bucket with teeth (also available in HD-version) 3) Bucket with cutting lip (also available in HD-version) Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized A 314 Litronic A 316 Litronic 2

Lift Capacities A 314 litronic` with Adjustable Up/Down Plus Offset Boom 3.3 m Stick 2. m 3. m m 6. m m. 6. 3. 3. 2.2* 2.2* 2.2* 2.2* 2.2* 2.2* 2.2* 2.2* 3.6 4.1* 1.* 1.* 3. 4.1* 1.* 1.* 4.1* 4.1* 1.* 1.* 4.1* 4.1* 1.* 1.* 6.4* 6.4* 3. 4.8* 2.1 3. 1.6 1.* 6.4* 6.4* 3. 4.8* 2.4 4.* 1.8 1.* 6.4* 6.4* 4. 4.8* 3. 4.* 1.* 1.* 6.4* 6.4* 4.8* 4.8* 3. 4.* 1.* 1.* 6.1* 8.* 3.3.3 2.1 3. 1.4 1.* 6.6 8.* 3..* 2.3 4.3* 1.6 1.* 8.3 8.*.* 2. 4.3* 1.* 1.* 8.* 8.*.*.* 3. 4.3* 1.* 1.*..3* 3.3.2* 2. 3.4 1.3 2.1* 6.4.3* 3.* 6.2* 2.2 * 1.4 2.1* 8.1.3* 6.2* 2.8 * 1. 2.1*.3*.3*.* 6.2* 3.6 * 2.1* 2.1*..8 3.1.3* 1.8 3.2 1.3 2.4 6. 1.* 3. 6.3* 2. 4.6* 2.* 8.3* 1.* 6.3* 2. 4.6* 2. 2.* 1.* 1.*.6 6.3* 3.4 4.6* 2.* 2.*.3 1.3* 2.. 1.6 3. 1.4 2. 6.1 1.4* 3.1 6.* 1. 4.3* 1.6 3.4* 8.2 1.4* 4.1 6.* 2. 4.3* 2.2 3.4* 1.4* 1.4*.4 6.* 3.3 4.3* 2. 3.4* 4..* 2. 4.8 1. 3.1*..* 2..2* 2.2 3.1*..* 3..2* 2. 3.1*.*.*.1.2* 3.1* 3.1* 4.23.84 6.3.18.2.6 6.4.3 Stick 2.2 m 3. m m 6. m m. 6. 3. 3. 2.1* 2.1* 2.* 2.* 2.1* 2.1* 2.* 2.* 2.1* 2.1* 2.* 2.* 2.1* 2.1* 2.* 2.* 3.6 3.* 2.* 2.* 1.* 1.* 3.* 3.* 2.* 2.* 1.* 1.* 3.* 3.* 2.* 2.* 1.* 1.* 3.* 3.* 2.* 2.* 1.* 1.* 3. 4.6* 2.1 3. 1.* 3. 4.6* 2.4 3.* 1.* 1.* 4.6* 4.6* 3. 3.* 1.* 1.* 4.6* 4.6* 3.8 3.* 1.* 1.*. 8.* 3.3.3 2.1 3. 1.3 1.* 6.* 8.* 3..4* 2.4 4.2* 1.* 8.3 8.* 4.6.4* 3. 4.2* 1.* 1.* 8.* 8.*.4*.4* 3. 4.2* 1.* 1.*.6 8.* 3.3.2 2. 3.4 1.2 1.* 6.4 8.* 3.6 6.1* 2.2 4.4* 1.4 1.* 8.1* 8.* * 6.1* 2. 4.4* 1.8 1.* 8.* 8.*.4 6.1* 3.6 4.4* 1.* 1.*.8.8 3.2.2 1.8 3.2 1.2 2.2* 6.6.* 3.6 6.2* 2.1 * 1.4 2.2* 8.1.* 4.6 6.2* 2. * 1. 2.2*.*.*. 6.2* 3. * 2.2* 2.2*.3 1.1* 2.8.1 1.6 3.1 1.3 2. 6.1 1.3* 3.2 6.4* 1. 4.4* 2.* 8.2 1.3* 4.2 6.4* 2. 4.4* 2.1 2.* 1.3* 1.3*.4 6.4* 3.3 4.4* 2. 2.* 4. 1.1 2. 4.8 1. 3.*. 1.2* 2..6* 2. 3.*.8 1.2* 3..6* 2. 3.* 1.2* 1.2*.1.6* 3.* 3.* 6.8 6.4.38.48.26 6.6.6 Stick 2.4 m 3. m m 6. m m. 6. 3. 3. 2.* 2.* 1.8* 1.8* 2.* 2.* 1.8* 1.8* 2.* 2.* 1.8* 1.8* 2.* 2.* 1.8* 1.8* 3.6 3.6* 2.1 2.4* 3.6* 3.6* 2.4* 2.4* 3.6* 3.6* 2.4* 2.4* 3.6* 3.6* 2.4* 2.4* 3. 4.4* 2.2 3.6 * 3. 4.4* 2.4 3.* * * 4.4* 4.4* 3. 3.* * * 4.4* 4.4* 3.* 3.* * * 6.1 8.1* 3.3.3* 2.2 3. 1.3 1.* 1.2 1.6* 6.* 8.1* 3..3* 2.4 4.1* 1.* 1.4 1.6* 8.1* 8.1*.3* 3. 4.1* 1.* 1.* 8.1* 8.1*.3*.3* 3.* 4.1* 1.* 1.*..1* 3.3.1* 2. 3.4 1.2 2.2 1.1 1.* 6.4*.1* 3.* 6.* 2.3 4.4* 1.4 2.* 1.3 1.* 8.1.1* 4.4 6.* 2. 4.4* 1.8 2.* 1.* 1.*.1*.1*. 6.* 3.* 4.4* 2.4 2.* 1.* 1.*.8.* 3.2.2* 1. 3.3 1.1 2.* 6..* 3.6 6.2* 2.1 * 1.3 2.* 8.2.* 6.2* 2. * 1.8 2.*.*.*. 6.2* 3. * 2.* 2.*.3 1. 2.8. 1.6 3.1 1.2 2.4 6.1 1.2* 3.2 6.3* 1. * 2.* 8.2 1.2* 4.2 6.3* 2. * 2. 2.* 1.2* 1.2*.4 6.3* 3.3 * 2.* 2.* 4. 1.1 2. 4.8 1.6 3.*. 1.4* 2..* 1.8 3.*.8 1.4* 3..* 2. 3.* 1.4* 1.4*.1.* 3.* 3.* 4.8 6.32.14.6.46 6.1.1 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. 28 A 314 Litronic A 316 Litronic

Lift Capacities A 314 litronic` with Adjustable Up/Down Plus Offset Boom 3.3 m EW-Undercarriage Stick 2. m 3. m m 6. m m. Stick 2.2 m 3. m m 6. m m. 2.2* 2.2* 2.2* 2.2* 2.2* 2.2* 4.23 2.1* 2.1* 2.* 2.* 2.1* 2.1* 2.* 2.* 2.1* 2.1* 2.* 2.* 6. 4.* 4.1* 1.* 1.* 4.1* 4.1* 1.* 1.* 4.1* 4.1* 1.* 1.*.84 6. 3.* 3.* 2.* 2.* 1.* 1.* 3.* 3.* 2.* 2.* 1.* 1.* 3.* 3.* 2.* 2.* 1.* 1.* 6.8 6.4* 6.4* 3. 4.8* 2.4 3.6* 1. 1.* 6.4* 6.4* 4.1 4.8* 2. 4.* 1.* 1.* 6.4* 6.4* 4.8* 4.8* 3.2 4.* 1.* 1.* 6.3 3. 4.6* 2.4 3.6 1.* 1.* 4.1 4.6* 2.6 3.* 1.* 1.* 4.6* 4.6* 3.2 3.* 1.* 1.* 6.4 3. 6.8 8.* 3.8.4 2.4* 3.6 1.6 1.*.1* 8.* 4..* 2. 4.3* 1. 1.* 8.* 8.* 4.8.* 3.1 4.3* 1.* 1.*.18 3. 6. 8.* 3.8.4 2.4 3.6 1.*.2 8.* 4..4* 2. 4.2* 1.6 1.* 8.* 8.* 4.8.4* 3.2 4.2* 1.* 1.*.38 6.6.4* 3..3 2.2 3.4 2.1*.*.4* 4. 6.2* 2.4 * 1.6 2.1* 8..4* 4.8 6.2* 3. * 2.1 2.1*.2 6.*.3* 3..3 2.3 3. 1.4 1.*.*.3* 3. 6.1* 2.4 4.4* 1.* 8.6.3* 4.8 6.1* 3.1 4.4* 1.* 1.*.48 6.6 1. 3.6.4* 2.1 3.3 2.4.1 1.1* 3.8 6.3* 2.2 4.6* 1.6 2.* 8.8 1.1* 4.* 6.3* 2. 4.6* 2.1 2.*.6 6.6. 3.6.4 2.1 3.3 1.4 2.2*.1 1.* 3.8 6.2* 2.3 * 2.2* 8.8 1.* 4. 6.2* 2. * 2. 2.2*.26 6.1 1.3* 3.1.1 1. 3.1 1.6 2. 6. 1.4* 3.4 6.* 2.1 4.3* 1.8 3.4* 8. 1.4* 4.4 6.* 2. 4.3* 2.4 3.4* 6.4 6.1 1.2* 3.2.2 1. 3.1 1.6 2.6 6. 1.3* 3. 6.4* 2.1 4.4* 1. 2.*. 1.3* 6.4* 2. 4.4* 2.2 2.* 6.6 3...* 2. 4. 2.2 3.1* 6.2.* 3.2.2* 2.4 3.1* 8..* 4.2.2* 3.1* 3.1*.3 3.. 1.2* 2. 4. 2. 3.* 6.2 1.2* 3.2.6* 2.2 3.* 8. 1.2* 4.2.6* 2. 3.*.6 Stick 2.4 m 3. m m 6. m m. 6. 3. 2.* 2.* 1.8* 1.8* 2.* 2.* 1.8* 1.8* 2.* 2.* 1.8* 1.8* 3.6* 3.6* 2.4* 2.4* 3.6* 3.6* 2.4* 2.4* 3.6* 3.6* 2.4* 2.4* 3. 4.4* 2. 3.6 * * 4.1 4.4* 2.6* 3.* * * 4.4* 4.4* 3.2 3.* * * 6.8 8.1* 3.8.3* 2.4 3.6 1.* 1.4 1.6*.2* 8.1* 4..3* 2.6 4.1* 1.6 1.* 1.6 1.6* 8.1* 8.1* 4.8.3* 3.2 4.1* 1.* 1.* 6..2* 3.*.2 2.3 3. 1.4 2.3 1.3 1.*..2* 3. 6.* 2. 4.4* 2.* 1.4 1.* 8.6*.2* 4. 6.* 3.1* 4.4* 2. 2.* 1.* 1.* 4.8 6.32.14.6 6.6.8* 3.6.3 2.1 3.3 1.3 2.*.*.8* 3. 6.2* 2.3 * 2.* 8..8* 4.8 6.2* 2. * 1. 2.*.46 3. 6.1 1.1* 3.3.2 1. 3.1 2. 6. 1.2* 3. 6.3* 2.1 * 1.6 2.*. 1.2* 6.3* 2. * 2.1 2.*.8 1.3 2. 4. 1. 3.* 6.3 1.4* 3.2.* 2. 3.* 8. 1.4* 4.2.* 2. 3.* 6.1.1 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. A 314 Litronic A 316 Litronic 2

Lift Capacities A 316 litronic` with Adjustable Up/Down Plus Offset Boom 3.6 m Stick 2.2 m 3. m m 6. m m. 6. 3. 3. 3.3* 3.3* 1.* 1.* 3.3* 3.3* 1.* 1.* 3.3* 3.3* 1.* 1.* 3.3* 3.3* 1.* 1.* 4.* 4.* 2.6 3.2* 1.* 1.* 4.* 4.* 2. 3.2* 1.* 1.* 4.* 4.* 3.2* 3.2* 1.* 1.* 4.* 4.* 3.2* 3.2* 1.* 1.*.6*.6* 4.2.2* 2. 4.1 1.6 1.6*.6*.6* 4.6.2* 2. 4.4*.6*.6*.2*.2* 3.6 4.4*.6*.6*.2*.2* 4.3 4.4*.2 1.1* 4.1 6.2* 2.6 4.1* 1.6 2. 1.4 1.6*. 1.1* 4.4 6.6* 2..* 1.8* 3.1* 1.6 1.6*.8 1.1*.4 6.6* 3.6.* 2.3 3.1* 1.1* 1.1* 6. 6.6* 4.3.* 2. 3.1*.* 1.* 4. 6.1 2. 4. 2.6 1.3 1.8*. 1.* 4.4.3* 2.8.3* 1. 3.* 1.8*.6 1.*.3.3* 3..3* 2.2 3.* 1.8* 1.8* 1.* 1.* 6.3.3* 4.3.3* 2.8 3.* 1.8* 1.8* 6.8 11.3* 3.8 6.2* 2.3 3. 1.4 2. 1.3 2.*. 11.3* 4.2.4* 2.6.4* 1.6 3.* 2.*. 11.3*.4.4* 3.3.4* 2.1 3.* 2. 2.* 11.3* 11.3* 6.4*.4* 4.1.4* 2. 3.* 2.* 2.* 6.3 11.8 3. 6.1 2.1 3.6 1.4 2.4*.2 12.2* 3..6* 2.3.4* 1.6 2.4*.6 12.2*.1.6* 3..4* 2.2 2.4* 12.2* 12.2* 6.4.6* 3..4* 2.4* 2.4* 6.1 11. 3.1.6 1. 3. 1.8 3.1*. 12.* 3..4* 2.2 3.* 2. 3.1*.4 12.* 4.6.4* 2. 3.* 2. 3.1* 12.* 12.* 6..4* 3. 3.* 3.1* 3.1*.3 6.68.46.8...24 6.3 Stick 2.4 m 3. m m 6. m m. 6. 3. 3. 3.2* 3.2* 1.* 1.* 3.2* 3.2* 1.* 1.* 3.2* 3.2* 1.* 1.* 3.2* 3.2* 1.* 1.* 3.6* 3.6* 2. 3.1* * * 3.6* 3.6* 2. 3.1* * * 3.6* 3.6* 3.1* 3.1* * * 3.6* 3.6* 3.1* 3.1* * * 4.6* 4.6* 4.2 4.6* 2. 4.1* 1.6 2.1* * * 4.6* 4.6* 4.6* 3. 4.1* 1.8 2.1* * * 4.6* 4.6* 4.6* 4.6* 3.6 4.1* 2.1* 2.1* * * 4.6* 4.6* 4.6* 4.6* 4.1* 4.1* 2.1* 2.1* * *.2 1.2* 4. 6.2 2. 4.1 1.6 2. 1.3 *. 1.2* 4.4 6.4* 2. 4.* 1.8 3.3* * *.8 1.2*.4 6.4* 3.6 4.* 2.3 3.3* * * 1.2* 1.2* 6.4* 6.4* 4.3 4.* 2. 3.3* * *..* 4. 6. 2.6 4.1 2.6 1.2 1.6*..* 4.4.2* 2.8.2* 1. 4.1* 1.4 1.6*.6*.*.3.2* 3..2* 2.2 4.1*.*.* 6.3.2* 4.3.2* 2.8 4.1* 6. 11.1* 3.8 6.1 2.4 3. 1.4 2. 1.2 1.8*.8 11.1* 4.3.4* 2.6*.3* 1.6 4.* 1.4 1.8*.* 11.1*.3.4* 3.3.3* 2.1 4.* 1.8* 1.8* 11.1* 11.1* 6.3*.4* 4.1.3* 2. 4.* 1.8* 1.8* 6.3 11.* 3. 6.1 2.1 3.6 1.3 2.1*.2 12.1* 3. * 2.4.4* 2.1*.6 12.1*.1 * 3.1.4* 2.1 2.1* 12.1 12.1* 6. * 3..4* 2.1* 2.1* 6.1 11. 3.1.6 1. 3. 1.6 2.*. 12.* 3..6* 2.2 4.3* 1. 2.*.4 12.* 4..6* 2. 4.3* 2. 2.* 12.* 12.* 6..6* 3. 4.3* 2.* 2.*. 8.1* 4.1.* 6.6 8.1* 4..* 8.1* 8.1*.*.* 8.1* 8.1*.*.*.64 6.1.6 8. 8.1..46 6. 3. Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. 3 A 314 Litronic A 316 Litronic

Lift Capacities A 316 litronic` with Adjustable Up/Down Plus Offset Boom 3.6 m EW-Undercarriage Stick 2.2 m 3. m m 6. m m. Stick 2.4 m 3. m m 6. m m. 3.3* 3.3* 1.* 1.* 3.3* 3.3* 1.* 1.* 3.3* 3.3* 1.* 1.*.3 3.2* 3.2* 1.* 1.* 3.2* 3.2* 1.* 1.* 3.2* 3.2* 1.* 1.*.64 6. 4.* 4.* 2. 3.2* 1.* 1.* 4.* 4.* 3.2 3.2* 1.* 1.* 4.* 4.* 3.2* 3.2* 1.* 1.* 6.68 6. 3.6* 3.6* 2. 3.1* * * 3.6* 3.6* 3.1* 3.1* * * 3.6* 3.6* 3.1* 3.1* * * 6.1.6*.6* 4.6.2* 2. 4.1.6*.6*..2* 3.2 4.4*.6*.6*.2*.2* 3. 4.4*.46 4.6* 4.6* * 4.6* 3. 4.1* 1.8 2.1* * * 4.6* 4.6* 4.6* 4.6* 3.2 4.1* 2. 2.1* * * 4.6* 4.6* 4.6* 4.6* 3. 4.1* 2.1* 2.1* * *.6 3..8 1.1* 4.4 6.2 2. 4.1 1.8 2. 1.6 1.6* 8. 1.1* 4.8 6.6* 3.2.* 2. 3.1* 1.1 1.1*. 6.6* 3..* 2.3 3.1*.8 3.. 1.2* 4.4 6.2 2. 4.1 1.8 2. * 8. 1.2* 4.8 6.4* 3.2 4.* 2. 3.3* * * 1.1* 1.2*. 6.4* 3. 4.* 2.4 3.3* * * 8.. 1.* 4.4 6.1* 2.8 4.1 1. 2.6 1.8* 8. 1.* 4.*.3* 3.1.3* 1. 3.* 1. 1.8*.* 1.*.4.3* 3.6.3* 2.3 3.* 1.8* 1.8*...* 4.3 6.1 2.8 4.1* 1. 2. 1.4 1.6* 8..* 4..2* 3.1.2* 1. 4.1*..*.4*.2* 3.6.2* 2.3 4.1* 8.1. 11.3* 4.2 6.1 2.6 3. 1.6 2. 2.* 8. 11.3* 4..4* 2..4* 1.8 3.* 1. 2.* 1.1 11.3*..4* 3.4.4* 2.2 3.* 2.* 2.*..8 11.1* 4.2 6.1 2.6 3. 1.6 2. 1.4 1.8* 8.6 11.1* 4..4* 2..3* 1.8 4.* 1.6 1.8*. 11.1*.4.4* 3.4.3* 2.2 4.* 1.8* 1.8*..1 11. 3. 6.1 2.3 3.6 1.6 2.4* 8.2 12.2* 4.4.6* 2.6.4* 1.8 2.4* 1. 12.2*.2.6* 3.1.4* 2.2 2.4*.24.1 11.* 3. 6.1 2.3 3.6 2.1* 8.2 12.1* 4.4 * 2.6.4* 1. 2.1* 1.1 12.1*.2 * 3.1.4* 2.1 2.1*.46 3. 6. 12. 3..6 2.2 3. 2. 3.1*. 12.* 4..4* 2. 3.* 2.3 3.1*.8 12.* 4.8.4* 3. 3.* 2.8 3.1* 6.3 3. 6. 12. 3.. 2.2 3. 1. 2.* 8. 12.* 4..6* 2. 4.3* 2.1 2.*.8 12.* 4.8.6* 3. 4.3* 2.6 2.* 6. 6.6 8.1* 4.6.*.6 8.1*.3.* 8.1* 8.1*.*.* 3. Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. A 314 Litronic A 316 Litronic 31

Backhoe Attachment A 314 litronic` with Adjustable Offset Boom 4.3 m ft 2 m 8 Digging Envelope with Quick Change Adapter 4 6 Stick length m 2. 2.2 2.4 2 1 1 6 4 3 2 1 Max. digging depth m 4. 4. Max. reach at ground level m.6.8 8. Max. dumping height m..6. Max. teeth height m 8. 8.2 8.2 Min. attachment radius m 3.1 2. 2.6 1 stick 2. m 4 stick 2. m 2 stick 2.2 m stick 2.2 m 3 stick 2.4 m 6 stick 2.4 m at max. attachment offset with vertical ditch walls with vertical ditch walls - -1-1 -1-2 -3-4 - -6 8 2 6 2 1 23 4 6 4 3 1 1 2 1 m ft Digging Forces without Quick Change Adapter 4 6 Max. digging force (ISO 61) kn 6. 63.8 6.1 t 6. 6. 6.1 Max. breakout force (ISO 61) kn.1.1.1 t 8.1 8.1 8.1 Max. breakout force with ripper bucket 111.3 kn (11.3 t) Max. possible digging force (stick 1. m) 82. kn ( 8. t) 243 43 R 26 Operating The operating weight includes the basic machine with 8 tires plus spacer rings, adjustable offset boom 4.3 m, stick 2.2 m, quick change adapter 33 and bucket 8 mm/. m 3. Undercarriage versions 243 48 A 314 litronic` with stabilizer blade A 314 litronic` with 2 pt. outriggers A 314 litronic` with stabilizer blade + 2 pt. outriggers A 314 EW litronic` with stabilizer blade A 314 EW litronic` with 2 pt. outriggers 14,8 kg 1, kg 16, kg 14, kg 1,1 kg Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) mm m 3 kg 2).2 26 6 2).36 2 8 2). 34 1, 2).6 38 1,2 2).8 43 3).31 2 6 3).3 2 8 3).3 32 1, 3).1 3 1,2 3).8 42 Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 V V V Y Y Y Y Y Y Y Y Y V V V Y Y Y Y Y Y V V y Y Y V Y Y V Y Y V V V y Y Y V Y Y V * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) Bucket with teeth (also available in HD-version) 3) Bucket with cutting lip (also available in HD-version) Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized 32 A 314 Litronic A 316 Litronic

Backhoe Attachment A 316 litronic` with Adjustable Offset Boom 4. m ft 3 m 1 Digging Envelope with Quick Change Adapter 4 6 2 2 1 8 6 4 Stick length m 2.2 2.4 2.6 Max. digging depth m.1.3. Max. reach at ground level m 8.6 8.8. Max. dumping height m 6.2 6.3 6.4 Max. teeth height m..1.2 Min. attachment radius m 3.4 3.1 2.8 1 3 2 1 1 stick 2.2 m 4 stick 2.2 m 2 stick 2.4 m stick 2.4 m 3 stick 2.6 m 6 stick 2.6 m at max. attachment offset with vertical ditch walls with vertical ditch walls - -1-2 1 23 Digging Forces without Quick Change Adapter 4 6-1 -1-2 -3-4 - -6-1 8 6 4 6 4 3 2 1 m Max. digging force (ISO 61 kn 6. 6.4 6 t.1 6. 6.3 Max. breakout force (ISO 61) kn 1. 1. 1. t 1. 1. 1. Max. breakout force with ripper bucket 114. kn (11.6 t) Max. possible digging force (stick 1. m) 8.8 kn ( 8.8 t) 3 24 2 2 3 1 1 ft R 226 Operating The operating weight includes the basic machine with 8 tires plus spacer rings, adjustable offset boom 4. m, stick 2.2 m, quick change adapter 33 and bucket 8 mm/.6 m 3. Undercarriage versions 24 3 A 316 litronic` with stabilizer blade A 316 litronic` with 2 pt. outriggers A 316 litronic` with stabilizer blade + 2 pt. outriggers A 316 EW litronic` with stabilizer blade A 316 EW litronic` with 2 pt. outriggers 16,6 kg 16, kg 1, kg 16, kg 1, kg Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) mm m 3 kg 2).3 2 6 2).4 3 8 2).6 4 1, 2).8 48 1,2 2). 2 3).32 2 6 3).4 33 8 3).6 38 1, 3).8 46 1,2 3) Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 V V y Y V y Y V y Y V y Y V y Y V y Y V y y y v y y v y y v y y v y y v y y v y y v y V y V V y V V y V V y V V y V V y V V y v v v y v v y v v y v v y v v y v v y v v * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) Bucket with teeth (also available in HD-version) 3) Bucket with cutting lip (also available in HD-version) Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized A 314 Litronic A 316 Litronic 33

Lift Capacities A 314 litronic` with Adjustable Offset Boom 4.3 m Stick 2. m 3. m m 6. m m. 6. 3. 3. 3.* 3.* 1.* 1.* 3.* 3.* 1.* 1.* 3.* 3.* 1.* 1.* 3.* 3.* 1.* 1.* 3.4 4.3* 1.* 1.* 3.8 4.3* 1.* 1.* 4.3* 4.3* 1.* 1.* 4.3* 4.3* 1.* 1.*.8.4* 3.1.1* 2. 3.4 1.8 2.* 6.6.4* 3..1* 2.2 3.* 2.* 2.*.4*.4*.1* 2. 3.* 2.* 2.*.4*.4*.1*.1* 3. 3.* 2.* 2.*. 1. 2.8.1 1. 3.3 1.6 2.2*. 1.* 3.2 6.1* 2.1 4.6* 1.8 2.2*. 1.* 4.2 6.1* 2. 4.6* 2.2* 2.2* 1.* 1.*.4 6.1* 3. 4.6* 2.2* 2.2* 4..4* 2.6 4.8 1.8 3.2 1.6 2.8*.4.4* 3. 6.* 2. 4.* 1. 2.8*.4.4* 4. 6.* 2.6 4.* 2.4 2.8*.4*.4*.2 6.* 3.4 4.* 2.8* 2.8* 4..4* 2.6 4.8 1. 3.4.4.4* 3. 6.2* 2.2 4.1*.4.4* 3. 6.2* 2.8 4.1*.4*.4*.1 6.2* 3. 4.1* 4.8.* 2.8 4.*.6.* 3.2 4.*.*.* 4.2 4.*.*.* 4.* 4.* 4.4. 6.48 6.6 6.3.68 4.3 Stick 2.2 m 3. m m 6. m m. 6. 3. 3. 1.* 1.* 1.* 1.* 1.* 1.* 1.* 1.* 3.4 4.1* 2.1 2.3* 1.* 1.* 3.8 4.1* 2.3* 2.3* 1.* 1.* 4.1* 4.1* 2.3* 2.3* 1.* 1.* 4.1* 4.1* 2.3* 2.3* 1.* 1.*. 6.* 3.2 4.* 2. 3.4 1. 1.8* 6. 6.* 3. 4.* 2.3 3.* 1.8* 1.8* 6.* 6.* 4.* 2. 3.* 1.8* 1.8* 6.* 6.* 4.* 4.* 3. 3.* 1.8* 1.8*..* 2.8.1 1. 3.3 2.*.8.* 3.2.* 2.1 * 1. 2.*.8.* 4.2.* 2. * 2.* 2.*.*.*..* 3. * 2.* 2.* 4..4* 2.6 4.8 1.8 3.2 1.6 2.4*.4.4* 3. 6.* 2. 4.* 1.8 2.4*.4.4* 3. 6.* 2.6 4.* 2.3 2.4*.4*.4*.2 6.* 3.4 4.* 2.4* 2.4* 4.6. 2.6 4.8 1.8 3.2.4.6* 2. 6.3* 2. 3.*.4.6* 3. 6.3* 2. 3.*.6*.6*.1 6.3* 3. 3.* 4.8.4* 2.6 4.8 2. 4.6..4* 3. 4.* 2. 4.6*.4*.4* 4. 4.* 3.8 4.6*.4*.4* 4.* 4.* 4.6* 4.6*.1 6.18 6.6 6. 6.. 4.6 Stick 2.4 m 3. m m 6. m m. 6. 3. 3. 3. 3.8* 2.1 2.* * * 3.8* 3.8* 2.4 2.* * * 3.8* 3.8* 2.* 2.* * * 3.8* 3.8* 2.* 2.* * * 6. 6.* 3.2 4.* 2. 3.4 1.6 1.6* 6.* 6.* 3.6 4.* 2.3 3.* 6.* 6.* 4.6 4.* 2. 3.* 6.* 6.* 4.* 4.* 3. 3.*.1.4* 2..1 1. 3.3 1.8*.8.4* 3.2.8* 2.1 4.4* 1. 1.8*..4* 4.2.8* 2. 4.4* 1.8* 1.8*.4*.4*..8* 3. 4.4* 1.8* 1.8* 4.6.* 2.6 4.8 1.8 3.1 2.1*.4.* 3. 6.4* 2. 4.* 1. 2.1*.4.* 3. 6.4* 2.6 4.* 2.1* 2.1*.*.*.2 6.4* 3.4 4.* 2.1* 2.1* 4.6. 2. 4. 1. 3.1 1. 3.*.3.* 2. 6.3* 2. 4.* 1. 3.*.3.* 3.8 6.3* 2.6 4.* 2. 3.*.*.*.1 6.3* 3.3 4.* 3.* 3.* 4..8* 2.6 4.8 2.3 4.2.4.8* 3..2* 2.6 *.8* 3..2* 3.4 *.8*.8*.2.2* *.44 6.3 6.8 6.8 6.4 6.12 4. Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. 34 A 314 Litronic A 316 Litronic

Lift Capacities A 314 litronic` with Adjustable Offset Boom 4.3 m EW-Undercarriage Stick 2. m 3. m m 6. m m. Stick 2.2 m 3. m m 6. m m. 6. 3.* 3.* 1.* 1.* 3.* 3.* 1.* 1.* 3.* 3.* 1.* 1.* 4.4 6. 1.* 1.* 1.* 1.* 1.* 1.*.1 3.8 4.3* 1.* 1.* 4.1 4.3* 1.* 1.* 4.3* 4.3* 1.* 1.*. 3.8 4.1* 2.3* 2.3* 1.* 1.* 4.1* 4.1* 2.3* 2.3* 1.* 1.* 4.1* 4.1* 2.3* 2.3* 1.* 1.* 6.18 3. 6..4* 3..1* 2.3 3. 2.* 2.*.2.4* 3.8.1* 2.4 3.* 2.* 2.*.4*.4* 4.8.1* 3.1 3.* 2.* 2.* 6.48 3. 6.8 6.* 3.6 4.* 2.3 3. 1.8* 1.8* 6.* 6.* 3.8 4.* 2.4 3.* 1.8* 1.8* 6.* 6.* 4. 4.* 3.1 3.* 1.8* 1.8* 6.6.8 1.* 3.2.2 2.1 3.3 1.8 2.2* 6.3 1.* 3. 6.1* 2.3 4.6* 2. 2.2* 8. 1.* 6.1* 2. 4.6* 2.2* 2.2* 6.6.8.* 3.2.2 2.1 3.3 1.8 2.* 6.3.* 3..* 2.3 * 1. 2.* 8..*.* 2. * 2.* 2.* 6..4.4* 3. 4. 2. 3.2 1. 2.8* 6..4* 3.3 6.* 2.2 4.* 2. 2.8* 8.1.4* 4.3 6.* 2.8 4.* 2.6 2.8* 6.3.4.4* 3. 4. 2. 3.2 1.8 2.4*..4* 3.3 6.* 2.2 4.* 1. 2.4* 8.1.4* 4.3 6.* 2.8 4.* 2.4* 2.4* 6..4.4* 3. 4. 2.2 3. 6..4* 3.2 6.2* 2.3 4.1* 8.1.4* 4.2 6.2* 3. 4.1*.68.4.6* 2. 4. 2. 3.3..6* 3.2 6.3* 2.2 3.* 8.1.6* 4.2 6.3* 2. 3.*. 3..6.* 3.2 4.* 6.2.* 3.4 4.*.*.* 4.* 4.3 3..6.4* 3. 4.* 2. 4.6* 6.1.4* 3.3 4.* 3.1 4.6*.4*.4* 4.3 4.* 4.1 4.6* 4.6 Stick 2.4 m 3. m m 6. m m. 6. 3. 3.8* 3.8* 2.4 2.* * * 3.8* 3.8* 2.* 2.* * * 3.8* 3.8* 2.* 2.* * * 6.* 6.* 3.6 4.* 2.3 3. 6.* 6.* 3.8 4.* 2.4 3.* 6.* 6.* 4.* 4.* 3.1 3.*..4* 3.3.2 2.1 3.3 1. 1.8* 6.4.4* 3..8* 2.3 4.4* 1.8* 1.8* 8.6.4*.8* 2. 4.4* 1.8* 1.8*.44 6.3 6.8 6.8.4.* 3. 4. 2. 3.2 1. 2.1*..* 3.3 6.4* 2.2 4.* 1.8 2.1* 8.1.* 4.3 6.4* 2.8 4.* 2.1* 2.1* 6.4 3..3. 2. 4.8 2. 3.2 1. 3.*..* 3.2 6.3* 2.1 4.* 2.1 3.* 8..* 4.2 6.3* 2.8 4.* 2. 3.*..8* 3. 4. 2.6 4.2 6..8* 3.2.2* 2.8 *.8*.8* 4.2.2* 3. * 6.12 4. Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. A 314 Litronic A 316 Litronic 3

Lift Capacities A 316 litronic` with Adjustable Offset Boom 4. m Stick 2.2 m 3. m m 6. m m. 6. 3. 3. 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 4. 4.6* 2. 3.* 4.4 4.6* 2. 3.* 4.6* 4.6* 3. 3.* 4.6* 4.6* 3.* 3.* 6..* 3.6.8* 2.3 3. 1.6 1.6*.4.* 4..8* 2.6 4.6*.*.*.1.8* 3.3 4.6*.*.*.8*.8* 4.1 4.6* 4.* 4.* 3.2.6 2.1 3.6 1.8* 4.* 4.* 3.6 6.* 2.4.1* 1. 1.8* 4.* 4.* 4. 6.* 3.1.1* 1.8* 1.8* 4.* 4.* 6. 6.* 3..1* 1.8* 1.8*.2.* 2..3 2. 3. 2.1*.*.* 3.3 * 2.2.4* 1. 2.1*.*.* 4.4 * 2..4* 2.1* 2.1*.*.*. * 3..4* 2.1* 2.1*.2 8.* 2.8.2 1. 3.4 1. 2.8* 6. 8.* 3.2.3* 2.2.3* 1. 2.8* 8.3 8.* 4.3.3* 2..3* 2. 2.8* 8.* 8.*.6.3* 3..3* 2.8* 2.8*.4.* 2..3 2.2 3.8 6.2.* 3.3 6.2* 2. 4.* 8..* 4.4 6.2* 3.2 4.*.*.*. 6.2* 4.1 4.* 6. 6.1.36.46.24 6.6.63 Stick 2.4 m 3. m m 6. m m. 6. 3. 3. 2.1* 2.1* * * 2.1* 2.1* * * 2.1* 2.1* * * 2.1* 2.1* * * 4. 4.4* 2. 3.* 1.4* 1.4* 4.4* 4.4* 2.8 3.* 1.4* 1.4* 4.4* 4.4* 3. 3.* 1.4* 1.4* 4.4* 4.4* 3.* 3.* 1.4* 1.4* 6. 8.* 3.6.6* 2.3 3. 1.6 1.* * * 8.* 4..6* 2.6 * 1.* 1.* * * 8.* 8.*.2.6* 3.3 * 1.* 1.* * * 8.* 8.*.6*.6* 4.1 * 1.* 1.* * *..* 3.2.6 2.1 3.6 2.3* 1.4 1.6*.*.* 3.6 6.8* 2.4.* 1. 2.3*.*.* 4. 6.8* 3.1.* 2.2 2.3*.*.* 6. 6.8* 3..* 2.3* 2.3*.1.* 2..3 2. 3. 1.4 1.*.*.* 3.3.4* 2.2.4* 1.6 1.*.*.* 4.4.4* 2..4* 1.* 1.*.*.*..4* 3..4* 1.* 1.*.1 8.1* 2.8.2 1. 3.4 1.6 2.*. 8.1* 3.2.3* 2.2.3* 1.8 2.* 8.1* 8.1* 4.3.3* 2..3* 2.4 2.* 8.1* 8.1*.6.3* 3..3* 2.* 2.*.3.3* 2..3 2. 3.6 6.1.3* 3.3 6.4* 2.3 4.* 8.4.3* 4.3 6.4* 3. 4.*.3*.3*. 6.4* 3.8 4.* 4.8 6.2.12.6.44 6.8.88 Stick 2.6 m 3. m m 6. m m. 6. 3. 3. * * * * * * * * 2.3* 2.3* 1.3* 1.3* 2.3* 2.3* 1.3* 1.3* 2.3* 2.3* 1.3* 1.3* 2.3* 2.3* 1.3* 1.3* 2. 3.4* 1.3* 1.3* 2.8 3.4* 1.3* 1.3* 3.4* 3.4* 1.3* 1.3* 3.4* 3.4* 1.3* 1.3* 6.8.* 3..3* 2.3 3. 1.6 2.1* 1.3* 1.3*..* 4.1.3* 2.6 4.3* 1.8 2.1* 1.3* 1.3*.*.*.2.3* 3.3 4.3* 2.1* 2.1* 1.3* 1.3*.*.*.3*.3* 4.1 4.3* 2.1* 2.1* 1.3* 1.3*. 6.* 3.2. 2.1 3.6 2.6 1.4 * 6.4 6.* 3.6 6.6* 2.4 4.* 1. 2.* * * 6.* 6.* 4. 6.6* 3.1 4.* 2.2 2.* * * 6.* 6.* 6. 6.6* 3. 4.* 2.* 2.* * *.1 6.* 2..3 1. 3. 1.4 2.3* 1.4 1.*. 6.* 3.3.3* 2.2.3* 1.6 2.3* 1.6 1.* 6.* 6.* 4.4.3* 2..3* 2.1 2.3* 1.* 1.* 6.* 6.*..3* 3..3* 2.3* 2.3* 1.* 1.*.1.8* 2.8.2 1. 3.4 2.2*..8* 3.2.4* 2.1.3* 1. 2.2*.8*.8* 4.2.4* 2.8.3* 2.2* 2.2*.8*.8*.6.4* 3.6.3* 2.2* 2.2*.2.6* 2.8.2 1. 3.4 1. 3.3 6..6* 3.2 6.6* 2.2 4.6* 2.1 3.3* 8.3.6* 4.3 6.6* 2. 4.6* 2.8 3.3*.6*.6*.6 6.6* 3. 4.6* 3.3* 3.3*.1 6.2.33.4.84.64.1 6.13 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. 36 A 314 Litronic A 316 Litronic

Lift Capacities A 316 litronic` with Adjustable Offset Boom 4. m EW-Undercarriage Stick 2.2 m 3. m m 6. m m. Stick 2.4 m 3. m m 6. m m. 4.8 6. 1.8* 1.8* 1.8* 1.8* 1.8* 1.8* 6. 6. 2.1* 2.1* * * 2.1* 2.1* * * 2.1* 2.1* * * 6.2 4.4 4.6* 2. 3.* 4.6* 4.6* 3. 3.* 4.6* 4.6* 3. 3.* 6.1 4.4* 4.4* 2. 3.* 1.4* 1.4* 4.4* 4.4* 3. 3.* 1.4* 1.4* 4.4* 4.4* 3.* 3.* 1.4* 1.4*.12 3..3.* 4..8* 2.6 3. 8.3.*.8* 2. 4.6*.*.*.3.8* 3.4 4.6*.36 3. 8.* 4..6* 2.6 3. 1.* 1.* * * 8.* 8.*.6* 2. * 1.* 1.* * * 8.* 8.*.3.6* 3.4 * 1.* 1.* * * 4.* 4.* 3.6.6 2.4 3. 1. 1.8* 4.* 4.* 4. 6.* 2..1* 1.8* 1.8* 4.* 4.* 4.8 6.* 3.2.1* 1.8* 1.8*.46.*.* 3.6. 2.4 3. 1. 2.3* 1.6 1.6*.*.* 4. 6.8* 2..* 1. 2.3*.*.* 4.8 6.8* 3.2.* 2.2 2.3*.6.*.* 3.3.3 2.2 3. 1. 2.1*.*.* 3. * 2..4* 1. 2.1*.*.* * 3..4* 2.1* 2.1*.24..* 3.3.3 2.2 3. 1.6 1.*.*.* 3..4* 2..4* 1.8 1.*.*.*.4* 3..4* 1.* 1.*.44 6. 8.* 3.2.3 2.2 3. 1. 2.8* 6. 8.* 3..3* 2..3* 2.1 2.8* 8.* 8.*.3* 3..3* 2.6 2.8* 6.6. 8.1* 3.2.2 2.1 3.4 1.8 2.* 6.8 8.1* 3.6.3* 2.4.3* 2. 2.* 8.1* 8.1* 4.4.3* 2..3* 2.4 2.* 6.8 3. 6.2.* 3.3.3 2.4 3..1.* 3.8 6.2* 2.8 4.* 8..* 6.2* 3.3 4.*.63 3. 6.1.3* 3.2.3 2.3 3.6..3* 3. 6.4* 2.6 4.* 8.8.3* 6.4* 3.1 4.*.88 Stick 2.6 m 3. m m 6. m m. 6. 3. * * * * * * 2.3* 2.3* 1.3* 1.3* 2.3* 2.3* 1.3* 1.3* 2.3* 2.3* 1.3* 1.3* 2.8 3.4* 1.3* 1.3* 3.1 3.4* 1.3* 1.3* 3.4* 3.4* 1.3* 1.3*..* 4.1.3* 2.6 3. 1.8 2.1* 1.3* 1.3*.*.*.3* 2. 4.3* 2. 2.1* 1.3* 1.3*.*.*.3*.3* 3.4 4.3* 2.1* 2.1* 1.3* 1.3* 6.3 6.* 3.6. 2.4 3. 1. 2.6 * * 6.* 6.* 4. 6.6* 2. 4.* 1. 2.* * * 6.* 6.* 4.8 6.6* 3.2 4.* 2.2 2.* * *.1 6.2.33.4.84. 6.* 3.3.3 2.2 3. 1.6 2.3* 1.* 6.* 6.* 3..3* 2..3* 1.8 2.3* 1.* 1.* 6.* 6.*.3* 3..3* 2.2 2.3* 1.* 1.*.64 3..8.8* 3.2.2 2.1 3.4 1. 2.2* 6.8.8* 3.6.4* 2.4.3* 1. 2.2*.8*.8* 4.4.4* 2..3* 2.2* 2.2* 6..6* 3.2.2 2.2 3.4 2.1 3.3* 6..6* 3.6 6.6* 2.4 4.6* 2.4 3.3* 8..6* 4.4 6.6* 2. 4.6* 2. 3.3*.1 6.13 Height Can be slewed through 36 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities on the load hook of the Liebherr quick-change adapter 33 without grab attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ 1 ) are specified over the steering axle with the stabilisers raised and over the rigid axle with the stabilisers down. Indicated loads comply with the ISO 16 standard and do not exceed % of tipping or 8 % of hydraulic capacity, or are limited by the permissible load of the load hook on the quick-change adapter (max. t). Without the quick-change adapter, lift capacities will increase by up to 11 kg. In accordance with the harmonised EU Standard EN 44-, hydraulic excavators used for lifting operations must be equipped with pipe rupture protection devices on the hoist cylinders and an overload warning device. A 314 Litronic A 316 Litronic 3

Clamshell Attachment A 314 litronic` with Hydr. Adjustable Boom 3.2 m ft 3 2 2 1 1 - m 8 6 4 3 2 1-1 -2 Digging Envelope with Quick Change Adapter 1 2 3 Stick length m 2.2 2.4 2.6 Max. digging depth m 6.4 6.6 6.8 Max. reach at ground level m 8.4 8.6 8.8 Max. dumping height m 6.1 6.2 6.4 Clamshell Model 8 B Max. tooth force 2 kn (.3 t) Max. torque of hydr. swivel 1.4 knm Operating The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 3.2 m, stick 2.2 m, quick change adapter 33 and clamshell model 8 B/.4 m 3 (8 mm without ejector). Undercarriage versions -1-1 -3-4 - A 314 litronic` with stabilizer blade A 314 litronic` with 2 pt. outriggers A 314 litronic` with stabilizer blade + 2 pt. outriggers A 314 EW litronic` with stabilizer blade A 314 EW litronic` with 2 pt. outriggers 1,3 kg 1, kg 16, kg 1,4 kg 1,6 kg -2-6 - 8 6 4 3 1 2 3 2 1 m 3 2 2 1 1 ft Clamshell Model 8 B Machine stability per ISO 16* ( % of tipping capacity) Width of shells Capacity mm m 3 kg 32 1).1 1 4 1).22 6 1).3 8 1).4 8 1, 1).8 32 2).1 6 4 2).22 81 6 2).3 83 8 2).4 8 Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 v v v y v v V V y V V y v v v y v v V V y Y Y V Y Y Y Y Y Y Y Y Y Y Y V Y Y Y Y Y Y * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) without ejector 2) with ejector Y = 1.8 t/m 3 max. material weight V = t/m 3 max. material weight y = 1.2 t/m 3 max. material weight v = not authorized 38 A 314 Litronic A 316 Litronic

Clamshell Attachment A 316 litronic` with Hydr. Adjustable Boom 3.4 m ft 3 2 2 1 1 - m 1 8 6 4 3 2 1-1 -2 Digging Envelope with Quick Change Adapter 1 2 3 Stick length m 2.2 2.4 2.6 Max. digging depth m 6.6 6.8. Max. reach at ground level m 8. 8..1 Max. dumping height m 6. 6.6 6.8 Clamshell Model Operating 8 B Max. tooth force 2 kn (.3 t) Max. torque of hydr. swivel 1.4 knm The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 3.4 m, stick 2.2 m, quick change adapter 33 and clamshell model 8 B/.4 m 3 (8 mm without ejector). Undercarriage versions -1-1 -3-4 - A 316 litronic` with stabilizer blade A 316 litronic` with 2 pt. outriggers A 316 litronic` with stabilizer blade + 2 pt. outriggers A 316 EW litronic` with stabilizer blade A 316 EW litronic` with 2 pt. outriggers 1, kg 1,3 kg 18,1 kg 1,1 kg 1,4 kg -2-6 1 23 - -2-8 1 8 6 4 3 2 1 m 3 2 2 1 1 ft Clamshell Model 8 B Machine stability per ISO 16* ( % of tipping capacity) Width of shells Capacity mm m 3 kg 32 1).1 1 4 1).22 6 1).3 8 1).4 8 1, 1).8 32 2).1 6 4 2).22 81 6 2).3 83 8 2).4 8 Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 v v v y v v y v v y v v y v v y v v y v v * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) without ejector 2) with ejector Y = 1.8 t/m 3 max. material weight V = t/m 3 max. material weight y = 1.2 t/m 3 max. material weight v = not authorized A 314 Litronic A 316 Litronic 3

Clamshell Attachment A 316 litronic` with Hydr. Adjustable Boom 3.4 m ft 3 2 2 1 1 - m 1 8 6 4 3 2 1-1 -2 Digging Envelope with Quick Change Adapter 1 2 3 Stick length m 2.2 2.4 2.6 Max. digging depth m 6.6 6.8. Max. reach at ground level m 8. 8..1 Max. dumping height m 6. 6.6 6.8 Clamshell Model Operating 1 B Max. tooth force 3 kn (.4 t) Max. torque of hydr. swivel 1.6 knm The operating weight includes the basic machine with 8 tires plus spacer rings, hydr. adjustable boom 3.4 m, stick 2.2 m, quick change adapter 33 and clamshell model 1 B/.4 m 3 (8 mm without ejector). Undercarriage versions -1-1 -3-4 - A 316 litronic` with stabilizer blade A 316 litronic` with 2 pt. outriggers A 316 litronic` with stabilizer blade + 2 pt. outriggers A 316 EW litronic` with stabilizer blade A 316 EW litronic` with 2 pt. outriggers 1,1 kg 1,4 kg 18,2 kg 1,2 kg 1, kg -2-6 1 23 - -2-8 1 8 6 4 3 2 1 m 3 2 2 1 1 ft Clamshell Model 1 B Machine stability per ISO 16* ( % of tipping capacity) Width of shells Capacity mm m 3 kg 32 1).1 4 1).22 82 6 1).3 86 8 1).4 1 1, 1).6 32 2).1 82 4 2).22 88 6 2).3 8 2).4 1,1 Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V y y v V y v V y v V y v V y v V y v V y v Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) without ejector 2) with ejector Y = 1.8 t/m 3 max. material weight V = t/m 3 max. material weight y = 1.2 t/m 3 max. material weight v = not authorized 4 A 314 Litronic A 316 Litronic

Attachments A 314 litronic` Ditchcleaning Buckets/Tilting Buckets Ditchcleaning Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 mm m 3 kg Hydr. Adjustable Boom 3.2 m 1, 3). 36 1,6 2). 64 V V V Y Y Y Y Y Y Y Y Y Y V V Y Y Y Y Y Y 2, 2). 66 Y Y V Y Y Y Y Y Y Y Y Y Y Y V Y Y Y Y Y Y 2, 3).48 3 2, 3).6 3 Y V V Y Y Y Y Y Y Y Y Y Y V V Y Y Y Y Y Y Gooseneck Boom m 1, 3). 36 1,6 2). 64 2, 2). 66 2, 3).48 3 2, 3).6 3 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 2. 2.2 2.4 Adjustable Up/Down Plus Offset Boom 3.3 m 1, 3). 36 1,6 2). 64 V y y Y Y V Y Y Y Y Y Y Y V y Y Y V Y Y Y 2, 2). 66 V V y Y Y Y Y Y Y Y Y Y Y Y y Y Y Y Y Y Y 2, 3).48 3 2, 3).6 3 V V y Y Y V Y Y Y Y Y Y Y V y Y Y V Y Y Y Adjustable Offset Boom 4.3 m 1, 3). 36 1,6 2). 64 2, 2). 66 2, 3).48 3 2, 3).6 3 Tilting Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 mm m 3 kg Hydr. Adjustable Boom 3.2 m 1, 2).6 66 V V y Y Y V Y Y Y Y Y Y V V y Y Y V Y Y Y Gooseneck Boom m 1, 2).6 66 Y Y V Y Y Y Y Y Y Y Y Y Y Y V Y Y Y Y Y Y 2, 2,2 2,4 2, 2,2 2,4 2, 2,2 2,4 2, 2,2 2,4 2, 2,2 2,4 2, 2,2 2,4 2, 2,2 2,4 Adjustable Up/Down Plus Offset Boom 3.3 m 1, 2).6 66 y y y V V V Y Y Y Y Y Y V V y V V V Y Y Y Adjustable Offset Boom 4.3 m 1, 2).6 66 Y Y V Y Y Y Y Y Y Y Y Y Y Y V Y Y Y Y Y Y * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) with 2 x rotator 3) rigid ditchcleaning bucket Y = 1.8 t/m 3 max. material weight V = t/m 3 max. material weight y = 1.2 t/m 3 max. material weight v =not authorized A 314 Litronic A 316 Litronic 41

Attachments A 316 litronic` Ditchcleaning Buckets/Tilting Buckets Ditchcleaning Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 mm m 3 kg Hydr. Adjustable Boom 3.4 m 1, 3). 36 1,6 2). 64 1,6 2).8 y y v V y v V y v V y v V y v V y v V y v 2, 2). 66 2, 3).48 3 2, 3).6 3 Gooseneck Boom. m 1, 3). 36 1,6 2). 64 1,6 2).8 y y v V y v V y v V y v V y v V y v V y v 2, 2). 66 2, 3).48 3 2, 3).6 3 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 Adjustable Up/Down Plus Offset Boom 3.6 m Y Y Y Y Y Y Y Y Y Y Y Y Y Y 1, 3). 36 1,6 2). 64 V V Y Y Y Y Y Y Y Y Y Y Y Y 1,6 2).8 v v y y y y y y y y y y y y 2, 2). 66 V V Y Y Y Y Y Y Y Y Y Y Y Y 2, 3).48 3 Y Y Y Y Y Y Y Y Y Y Y Y Y Y 2, 3).6 3 V V Y Y Y Y Y Y Y Y Y Y Y Y 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 Adjustable Offset Boom 4. m 1, 3). 36 1,6 2). 64 1,6 2).8 2, 2). 66 2, 3).48 3 2, 3).6 3 Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V y y v y y v y y v y y v y y v y y v y y v Tilting Buckets Machine stability per ISO 16* ( % of tipping capacity) Cutting width Capacity ISO 41 1) Stabilizers Stabilizer blade 2 pt. outriggers Stabilizer blade + EW stabilizers EW stabilizer EW 2 pt. raised down down 2 pt. outr. down raised blade down outr. down Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) Stick length (m) 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 mm m 3 kg Hydr. Adjustable Boom 3.4 m Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V 1, 2).6 66 1,6 2).8 4 y y v V y v V y v V y v V y v V y v V y v Gooseneck Boom. m Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V 1, 2).6 66 1,6 2).8 4 y y v V y v V y v V y v V y v V y v V y v 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 2.2 2.4 Adjustable Up/Down Plus Offset Boom 3.6 m y y V V Y V Y V V V Y V Y V 1, 2).6 66 1,6 2).8 4 v v y y y y y y y y y y y y 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 2.2 2.4 2.6 Adjustable Offset Boom 4. m Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V Y Y V 1, 2).6 66 1,6 2).8 4 y y v V y v V y v V y v V y v V y v V y v * Indicated loads are based on ISO 16 and do not exceed % of tipping or 8 % of hydraulic capacity, max. stick length without quick change adapter, lifted 36 on firm with blocked oscillating axle 1) comparable with SAE (heaped) 2) with 2 x rotator 3) rigid ditchcleaning bucket Max. material weight Y = 1.8 t/m 3, V = t/m 3, y = 1.2 t/m 3, v = not authorized 42 A 314 Litronic A 316 Litronic

Equipment Undercarriage 2-circuit brake system Support individually controllable + + Tires Mitas EM 22 Wide gauge 2. m + + Travel speed levels (four) Piston rod protection support cylinders + + Powershift transmission Parking brake, maintenance-free Tire variants, various + + Pipe fracture safety on support cylinders Custom paintwork undercarriage + + Speeder * + + Tool box on both sides, lockable Central lubrication undercarriage + + Uppercarriage Refueling pump, electrical + + Main battery switch for electrical system Engine hood with gas spring Uppercarriage doors, lockable Uppercarriage lock electro-hydraulically activated from the cab Beacon on engine hood + + Custom paintwork uppercarriage + + Power socket 12 V, 2 A + + Central lubricating system, automatic + + Central lubricating system, semi-automatic Hydraulics Stop cock between hydraulic tank and pump(s) Pressure test fittings Accumulator for controlled lowering of the attachment with the engine shut down Hydraulic oil from 2 C to + 4 C Hydraulic oil filter with integrated microfilter Liebherr hydraulic oil, biologically degradable + + Liebherr hydraulic oil, specially for warm and cold regions + + Mowing bucket and mulcher operation + + Bypass filter + + Change-over for controls (hammer/shear operation via pedals or joystick) + + Engine Fuel theft protection + + Fuel preheating + + Coolant preheating 23 V + + Liebherr particle filter + + Fold-away fan for comfortable cleaning Fan drive, reversible + + Air pre-cleaner 314 314 314 314 316 316 316 316 Operator s Cab Hourmeter, readable from the outside Roof window Travel alarm + + Fire extinguisher + + Bottle holder FOPS cab protection system + + Slide-in front window Floor mat removable Coat hook Air conditioner + + Consoles and seat adjustable separately or in combination Cooler, electrical + + Steering column adjustable horizontally LIDAT-Standard *** + + Liebherr proportional controls + + Automatic engine shut-down (time adjustable) + + Bullet proof glass (front and top) + + Radio system + + Smokers package Rear view camera ** Back-up alarm + + Beacon + + Tainted glass Windshield washer Rear wiper + + Wiper lower front window + + Sliding window in the door Sun roller blind Auxiliary heater with timer + + Immobilizer electronic (key code) + + Xenon headlights (front resp. rear) + Auxiliary headlights (front resp. rear) + + Attachment Main boom, adjustable in height and laterally + + Main boom, adjustable in height + + Function rotating device incl. tubing + + Function hammer/shear operation incl. tubing + + Grapple sticks + + Hoist limitation, electronic + + Piston rod protection bucket cylinder + + Piston rod protection stick cylinder + + Load hook on stick + + Shackle on stick + + Leak oil line, additional for attaching tools + + Liebherr ditchcleaning bucket program + + Liebherr pallet forks + + Liebherr quick change adapter, hydraulic or mechanical + + Liebherr tilting bucket program + + Liebherr swivel rotator program + + Liebherr sorting grapple program + + Liebherr backhoe bucket program + + Liebherr tooth system + + Liebherr clamshell grapple program + + LIKUFIX, coupling hydraulic tools from the cab + + Gooseneck boom + + Gooseneck boom, stretched + Gooseneck boom, laterally adjustable + + Pipe fracture safety boom cylinders Pipe fracture safety stick resp. bucket cylinder + + Hose quick coupling at end of stick Custom painting for tools + + Tool-Control, 1 tool adjustments selectable over the display + + Overload warning device Bottom chord protection for stick + + Central lubricating system, expanded for connecting link + + Central lubrication for quick change adapter + + 314 314 316 316 = Standard, + = Option, = not available * = not available in all countries, ** = country-dependent, *** = starting mid 21 Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr to retain warranty. All illustrations and data may differ from standard equipment. Subject to change without notice. A 314 Litronic A 316 Litronic 43

The Liebherr Group of Companies Wide product range The Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr s highvalue products and services enjoy a high reputation in many other fields, too. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes. Exceptional customer benefit Every product line provides a complete range of models in many different versions. With both their technical excellence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application. State-of-the-art technology To provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured inhouse, for instance the entire drive and control technology for construction equipment. Worldwide and independent Hans Liebherr founded the Liebherr family company in 14. Since that time, the enterprise has steadily grown to a group of more than 1 companies with over 32, employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company. www.liebherr.com Printed in Germany by Eberl RG-BK-RP LHB/VF 13464-3-4.1_enGB Liebherr-Hydraulikbagger GmbH Liebherrstraße 12, D-884 Kirchdorf/Iller +4 34 8-, Fax +4 34 8-2 4 www.liebherr.com, E-Mail: info.lhb@liebherr.com

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback