Product Catalogue Version 1.0-2017 sales@lionforgeindustries.com
An Introduction to Simplement The Simplement System is our Patent Pending receiver/hitch unit and modular implement system. This product line was designed for use with industry standard three-point hitches and was also made adaptable for use with a skid steer quick attach equipped loader for front mounting. Specifically, the Simplement Model 321 is the first three-point to single point quick connection receiver that can bear the entire weight of the implement while allowing you to attach and detach your Non-PTO powered implements; in most cases, without leaving the tractor seat. Simplement also makes life easier for you, by not having to constantly loosen and adjust lower link arm turnbuckles every time you want to change an implement. Even when using PTO powered implements, the Simplement System still reduces connect and disconnect time by eliminating the hassle of wrestling with cumbersome implements. This results in both time savings and injury prevention, making the Simplement system a much safer and easier to use as opposed to traditional connection types. The Simplement system also offers several advantages in flexibility, such as the ability to convert most existing OEM implement designs for use with either receiver. Another industry first the Simplement system offers, is it allows box scrapers, with a width of up to 60in on Model 321., to be reversed or turned 360 degrees with 5 adjustments in both forward and rearward positions. This innovation allows the Simplement system to further increase the versatility of one of the most commonly used implements in the industry. Another advantage, is a simple, yet quick, hitch system to take advantage of Simplement Model 321 s towing capacity for the towable implements and equipment you are using. And lastly, by adding Model SSM, the Skid Steer quick attach compatible version for the front of your tractor, it gives you greater implement versatility. Model SSM offers you the ability to utilize some of the implements you would normally use on the back of your tractor, on the front allowing you even more flexibility and the convenience of maximizing the tooling you can use to get the job done. Page 2
Table of Contents An Introduction to Simplement... 2 Simplement Receivers... 4 Simplement Model 321... 5 Simplement Model SSM... 6 Simplement Attachments... 7 Simplement Box Scrapers... 8 Simplement Landscape Rakes... 9 Simplement Ripper Shank/ Sub Soilers... 10 Simplement Conversion Parts... 11 Simplement Wear Parts... 15 Ripper Shank Wear Parts... 16 Landscape Rake Wear Parts... 17 Box Scraper Wear Parts... 18 Simplement Limited Warranty... 19 Page 3
Simplement Receivers Page 4
Simplement Model 321 is our patent pending modular implement system. It is designed to help eliminate the hassles that come with the attachment and detachment of implements. Our current model utilizes a standard, category one, three-point hitch hookup to a single point connection. This makes the changing of cumbersome implements more efficient and less of a struggle. Simplement Model 321 can also accommodate most PTO driven implements and although it will require you to get off the tractor to hook up the shaft, at least you won t need to wrestle with lining up those regular 3-point connections. Simplement also enhances efficiency for you by not having to constantly adjust lower link arm turnbuckles every time you need to change an implement. Most other OEM implements can be made adaptable to use with Simplement receivers with some minor conversions and modifications. One stand-out feature is that it also gives you the ability to rotate and angle a box scraper up to a width of 60 or less. This offers much more versatility to this popular tool. Simplement Model 321 $2,250.00* *All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Model 321 Part Number 70002 Connection Method 3 Point Cat. 1 Unit Weight (Approx.) Max Tongue Weight Max Towing Capacity Tractor HP Max Implement Width Allowing Full Rotation Index Lock Pin Engagement Jaw Control 200 lbs (approx.) 2500lbs 8000lbs Up to 50hp 61 Inches Automatic & Manual Release Manual Handle with Safety Catch and Release Lever Jaw Adjustment Self Adjusting *Do not exceed your tractor OEM 3point hitch capacity rating* Page 5
Simplement Model SSM is our skid steer quick attach compatible version receiver for our modular implement system. We wanted to bring you even more flexibility with your implements! Model SSM offers you the ability to utilize some of the implements you would normally use on the back of your equipment by allowing you to mount them on the front, helping you utilize your tooling in an even more versatile combination to get the job done. Simplement Model SSM $2,300.00* *All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Model SSM Part Number 70001 Connection Method Unit Weight (Approx.) Max Tongue Weight Max Towing Capacity Tractor HP Max Implement Width Allowing Full Rotation Index Lock Pin Engagement Jaw Control Jaw Adjustment Skid Steer Quick Attach 220 lbs (approx.) 1000lbs 4000lbs Up to 50hp May be limited only by the distance from the center of the jaws to the closest obstruction on the front of the tractor. Do not exceed max tongue weight capacity. Automatic & Manual Override Manual Handle with Safety Catch and Release Lever Self Adjusting *Do not exceed your tractor OEM loader capacity rating* Page 6
Simplement Attachments Page 7
Simplement Box Scrapers are designed for maximum flexibility for when you are tackling both the simple and tough landscaping jobs. Whether you are smoothing your driveway, fixing ruts, contouring, or moving materials, our Box Scraper can make your life easier, even when pushing snow. Unlike any other box scraper, when matched with our Simplement Model 321 receiver can offer 360 degrees rotation on models up to 60 inches wide. This allows a maximum 60in. wide box scraper to be completely reversed allowing the use of the rear cutting edge to now be used as a scraper blade. It also has adjustable angles of five forward and five rearward positions of 22 degrees. Simplement box scrapers wider than 60 inches may not be able to rotate 360 degrees in Model 321, but they can still be angled, disconnected, and reconnected to reverse direction. This innovation allows the Simplement system to further increase the versatility of one of the most commonly used implements in the industry. (60 ) Model SBS-600 Shown Here *All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Model SBS-540 SBS-600 SBS-720 SBS-840 Part Number 70022 70023 70025 70026 $1,650.00* $1,700.00* $1,860.00* $1,940.00* Approx. Width 54in. 60in. 72in. 84in. Approx. Weight 382lbs 425lbs 486lbs 545lbs King Pin Bolt Torque Min. 500 ft-lbs Min. 500 ft-lbs Min. 500 ft-lbs Min. 500 ft-lbs Max. Working Depth 4in. 4in. 4in. 4in. No. of Shanks 4 (Reversible) 5 (Reversible) 6 (Reversible) 7 (Reversible) Reversible Cutting Edges (½ in x 6in High Carbon Steel) 360 Rotation with Simplement Model 321 360 Rotation with Simplement Model SSM Yes Yes Yes Yes Yes Yes No No Yes Yes Yes Yes Box Reversible Yes Yes Yes Yes Pivot Angle Adjustment Manual, 5 forward and rearward positions Manual, 5 forward and rearward positions Manual, 5 forward and rearward positions Manual, 5 forward and rearward positions Adjustment Tilt 3pt Hitch Linkage 3pt Hitch Linkage 3pt Hitch Linkage 3pt Hitch Linkage Tractor Engine Require. Up to 50HP Up to 50HP Up to 50HP Up to 50HP Capacity (approx.) 10 cu. ft. 11.5 cu. ft. 14 cu. ft. 16 cu. ft. Page 8
Simplement Landscape Rakes is a great tool for the clearing of dirt, rocks, fallen branches and general debris on your land or jobsite. When front mounting your Simplement rake to our Model SSM receiver, this not only adds the benefit of extended reach, it allows you to use your loaders float function (if equipped) and tilt cylinders. This allows you to lift and curl for a gentler approach in delicate clean up on the smaller or environmentally sensitive jobs. You also can apply downforce on the rake for those tough clean ups or landscaping jobs where you really need to get things moving or clean. Model 321 will accommodate a rake of up to 60 inches wide and support 360-degree rotation along with 5 forward and 5 rearward angle adjustments at 22 degrees. A wider rake may be utilized with Model 321 which will still be reversible and angled, but will not rotate 360 degrees. All Simplement rakes come standard with a stand which is storable inside the rake assembly when not in use. (60 ) Model SLR-600 Shown Here *All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Model SLR-480 SLR-540 SLR-600 SLR-720 SLR-840 SLR-960 Part Number 70009 70010 70011 70012 70013 70014 $745.00* $760.00* $798.00* $855.00* $903.00* $989.00* Width 48in. 54in. 60in. 72in. 84in. 96in. Weight (Approx.) 136 lbs 148 lbs 160 lbs 185 lbs 209 lbs 234 lbs King Pin Bolt Torque Min. 500 ft-lbs Min. 500 ft-lbs Min. 500 ft-lbs Min. 500 ft-lbs Min. 500 ft-lbs Min. 500 ftlbs Horsepower Rating Up to 50HP Up to 50HP Up to 50HP Up to 50HP Up to 50HP Up to 50HP Number of Tines 24 27 30 36 42 48 Tine Spacing 1 in. 1 in. 1 in. 1 in. 1 in. 1 in. Tine Dimensions 1 x 5/16 1 x 5/16 1 x 5/16 1 x 5/16 1 x 5/16 1 x 5/16 Pivot Angle Adjustments Manual, 5 forward and rearward positions Manual, 5 forward and rearward positions Manual, 5 forward and rearward positions Manual, 5 forward and rearward positions Manual, 5 forward and rearward positions Manual, 5 forward and rearward positions 360 Rotation with Simplement 321 Yes Yes Yes No No No 360 Rotation with Simplement SSM Yes Yes Yes Yes Yes Yes Parking Stand Standard Standard Standard Standard Standard Standard Page 9
Simplement Ripper Shank/ Sub Soilers have been designed as a multi-use tool to maximize versatility. Simplement ripper shank offers more adjustability to control depth and utilizes more of the wear parts you need for the job, including having available add on accessories all in one flexible tooling platform. Whether you are breaking some new ground, loosening compacted dirt, or trenching a water/wire line the Simplement Ripper shank is one tool you will want in your arsenal. The Simplement ripper shank comes equipped with a 1.25 thick shank with a replaceable wear bar, and is fitted with a grade 2 shear bolt to protect your Simplement receiver when encountering obstructions during use. It also comes standard with its own removable parking stand. See our product catalogue for a full list of accessories and wear parts for this implement. Model SRS - 100 Part Number 70003 $1,125.00* Model SRS-100 Shown Here Approx. Weight Overall Height King Pin Bolt Torque 150 lbs 34in. Min. 500 ft-lbs Number of Shanks 1 Shank Type Shank Angle 1.25in. Thick Adjustable Shear Bolt Size 5/8 in. x 3.75in. UNC Grade 2 Working Depth Wear Protection Parking Stand Required Tractor HP Recommended Operating Speed Max of 19in. 5/8in. Replaceable Wear Bar Standard Up to 50HP 6.5-10km/h (4-6mph) *All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Page 10
Simplement Conversion Parts Page 11
*All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. King Pin Part Number 20004 $86.00* Weld-On Square Index Plate 20027 13 x13 x1/2 $99.00* 20024 14 x14 x1/2 $104.00* 20025 15 x15 x1/2 $110.00* 20015 16 x16 x1/2 $116.00* Weld-On Square Locking Plate 20062 10 x10 x1/2 $37.00* 20054 12 x12 x1/2 $57.00* 20055 13 x13 x1/2 $63.00* 20056 14 x14 x1/2 $69.00* 20057 15 x15 x1/2 $75.00* 20058 16 x16 x1/2 $81.00* Page 12
*All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Weld-On Square Reversible Locking Plate 20061 12 x12 x1/2 $47.00* Weld- On Round Towing Hitch Plate 20063 10 O.D. x 1/2 $28.50* Weld- On Square Towing Hitch Plate 20064 10 x10 x1/2 $31.50* Page 13
Have an implement you want to convert for use with Simplement? Please contact us for a consultation today! We can work with you to design and build implement conversion mounting solutions to accommodate most OEM designs. We also offer a selection of premade conversion parts, that are available in various sizes, should you want to tackle the conversion process yourself! *Please Note: Always ensure that if you are building a hitch system that you incorporate the ability for your hitch to tilt and rotate to prevent twisting or stress on your Simplement receiver. Visit our Implement Conversion Solution page on our website to learn more! Here are some examples of conversion parts we have produced to convert a few different implements. Weld-On Mounting Bar for Finishing Mower Tilt Mount Bracket Assembly for Finishing Mower Mount for 60in Box Scraper Index Plate Mount for Landscape Rake Page 14
Simplement Wear Parts Page 15
Ripper Shank Wear Parts *All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Standard Wide Wing Tip 20074 8in Wide $165.00* 20075 10in Wide $169.00* 20076 12in Wide $174.00* Standard Material: Mild steel Premium Material: 450 Wear plate Premium Wide Wing Tip 20074P 8in Wide $199.00* 20075P 10in Wide $204.00* 20076P 12in Wide $212.00* Standard Wear Tip 20073 2.5in $88.00* Standard Material: Mild steel Premium Material: 450 Wear plate Premium Wear Tip 20073P 2.5in $102.00* Page 16
*All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Furrow Tip 20095 8in $87.00* Wear Bar 20082 1.25in x 5/8in $47.00* Landscape Rake Wear Parts Landscape Rake Tine - Single Hole Part Number 20200 $7.00* Page 17
Box Scraper Wear Parts *All prices in Canadian dollars. For sales inquiries outside Canada, please contact sales at sales@lionforgeindustries.com for pricing and availability. Cutting Edge 20613 48in $110.00* 20614 54in $121.00* 20615 60in $132.00* 20616 72in $155.00* 20617 84in $178.00* Shank w/ Wear Tip 20631 16in $30.00* Page 18
Simplement Limited Warranty Lionforge Industries Inc. warrants only to the original purchaser that the product that is the subject of this sale be free from all defects in workmanship and material at the time of sale. This warranty will begin on the original purchase date by the end user according to the following schedule when used as intended and under normal service and conditions for personal use. The purchaser is solely responsible for determining suitability of goods sold. If the equipment is used for commercial purposes, the limited Warranty period for Commercial Applications is 90 Days, and the original purchaser must make any claims within 90 days from the date of purchase. Equipment: One-year Parts and Labour (Commercial Applications 90 days) Wear Parts: Parts deemed as wear parts are not included in this warranty as they are a part of regular maintenance and service of this Lionforge Industries Inc. product. Lionforge Industries Inc. reserves the right to decide what is defined as a wear part and what is not, at any given time. This warranty is limited to the repair or replacement of any defective part by Lionforge Industries Inc and the installation by the dealer of any replacement part. This warranty does not cover parts deemed as wear parts. Warranty claims must be made within 30 days from when the defect has been discovered to the original dealer of this product. Lionforge Industries Inc. reserves the right to inspect any equipment or any parts that have been claimed as defective in workmanship or material and at it s discretion may ask for the return of the equipment or parts for further analysis in which the purchaser will be responsible for all shipping related costs for items being returned. Replacement, Conversion & Repair Parts Limited Warranty: All other parts not deemed as wear parts by Lionforge Industries Inc. carry a 30-day warranty and are subject to the conditions set forth in this Limited warranty document. Warranty claims must be made and the defective part returned within 30 days from invoice date of purchase. Lionforge Industries Inc. also reserves the right to provide remanufactured, refurbished or substitute parts as a replacement solution option to the original purchaser for parts replacement under this limited warranty. The purchaser is responsible for all shipping related costs for items being returned. This warranty does not apply to any part or product which has been subject to the following: misused or damaged by accident; negligence; lack of proper maintenance, service or repair of the product; alteration or modification of the product that is not approved by Lionforge Industries Inc; any damages that occur from improper use of the product or failure to follow operating instructions; any type of accidents; and repairs that have been made using other parts not manufactured, supplied and or authorized by Lionforge Industries Inc. Page 19
This warranty will not be interpreted to render Lionforge Industries Inc. liable for any damages of any sort, direct and consequential, or contingent to property. Lionforge Industries Inc. also shall not be responsible for any damages occurring from any cause beyond its reasonable control. This warranty does extend to any loss of crops or labour for any reason; it also does not apply to rental equipment. This warranty is considered null and void if the product has not been registered with Lionforge Industries Inc. through the original dealer by submitting a completed warranty registration card within a maximum of 30 days from the date of purchase. No other warranty of any kind, expressed or implied, is made with respect to this sale. All other implied warranties of this purchase which exceed the obligations laid out in this written warranty are hereby denied and excluded from this sale. By purchasing the product that is the subject of this sale, the purchaser acknowledges to having read this agreement, understands it, and is bound by its terms. the right to change design, materials, specifications, and price without notice. For questions regarding our warranty or instructions on how to place a claim, please contact by: Filling out the contact form on our website at www.lionforgeindustries.com/contact/ Phoning us at 1-204-515-6297 Emailing us at warranty@lionforgeindustries.com Page 20