ZP SERIES POSITIVE DISPLACEMENT PUMPS ZP SERIES PUMPS - REDEFINING ENGINEERED EXCELLENCE. Shampoo Toothpaste

ZP SERIES PUMPS - REDEFINING ENGINEERED EXCELLENCE DRESSINGS Mayonnaise Sauces BEVERAGES Fruit Concentrate Fruit Juices Beer Mash DAIRY Soft Cheese Butter Milk Cream Margarine Ice Cream Yogurt Curds BAKERY Dough Fats Fruit Filling Icing Oils Yeast CANDY Chocolate Cocoa Butter Corn Syrup Gelatin Sugars CANNED FOODS Baby Food Jams Jellies Mayonnaise Potato Salad Pudding Relish Stews FLAVORINGS Concentrates Syrups INDUSTRIAL Auto Pain Inks Latex Polymers MEATS Broth Fats Gelatin Pet Foods Sausage Fillings COSMETICS Creams Emulsions Jellies Lotions Shampoo Toothpaste www.ampcopumps.com 245 W. Mill Road Glendale, WI 59 Phone: 8.737.8671 info@ampcopumps.com Am Gäxwald 6 863 Herxheim Germany Phone: +49 72 5585 info@ampcopumps.de POSITIVE DISPLACEMENT PUMPS ZP SERIES

ZP Series Pumps REDEFINING ENGINEERED EXCELLENCE The ZP Series establishes a new standard of value, quality and features in the positive displacement pump market. In 21, Ampco introduced the ZP1 and ZP2 Series of positive displacement pumps. The ZP Series offers more standard features than competing pumps including a stainless steel gearcase. ZP1 and ZP2 Series pumps are part-for-part, 1% interchangeable with the competition. Raising the bar in 212 Ampco introduced the Series. The patented is fully CIP-able without modification or loss of efficiency. The front-loading seal design allows for fast and easy maintenance without removing process piping or the heavy fluid end. The unique rotor case design eliminates all dead zones within the pump making the the only fully CIP-able choice in sanitary positive displacement pumps. The is EHEDG certified; in conformance with 3A standards and the ATEX Directive. Further advancing the traditional design features of positive displacement pumps Ampco introduced the patented ZP1+ Series, which is designed to allow o-ring seals to be changed without disconnecting the pump from the piping system. Both the and ZP1+ set a new standard for sanitary processing. The entire ZP Series offers quality, enhanced features, value and proven performance. Available Options Rectangular inlets Heating jackets Pressure relief valves Aseptic design Optional rotor designs Full assemblies Flat body profile Tethered wing nuts Cover handles Consult with engineering for additional options ZP GENERAL PERFORMANCE RANGE range:.1 to 8 gpm (.2 to 147.2 m3/hr) Pressure range: up to psi/34 range: - to + (- to +15) Note: Hot clearances required for high temp operation Viscosity range: 1 to 1,, CPS Ampco Pumps Company is ISO 91:8 certified.

ZP1+ SERIES Tapered roller bearings maintain axial forces for equal support in both directions Ampco continues to bring innovation to the sanitary pump market. We have enhanced the traditional design of the popular ZP1 pump and are pleased to introduce the NEW ZP1+ (available in models and larger) for ease of maintenance and reduced downtime. Patent Pending ZP1+ Easy Maintenance and Reduced Downtime Solid 17-4 ph stainless steel shafts, provide four times the yield strength of 3l6L Stainless steel bearing retainer prevents corrosion and enhances bearing protection Helical timing gears for increased load carrying capacity and reduced noise Alloy 88 rotors provide non-galling characteristics to maintain tight tolerances. Optional clearances available Separate oil chamber for gears using anti-microbial lube AMPCO ZP1+ DESIGN The patent pending design changes the position of the dynamic o-ring, allowing replacement without removing the body or having to disconnect the pump from the piping system. The one piece sleeve design seals the pump if the rotors are removed for CIP processing. Fewer parts, simple maintenance and reduced downtime all lead to substantial savings. REMANUFACTURING OPTION Existing ZP1 pumps (and competing models) can be converted to a ZP1+ pump during the remanufacturing process at no extra charge. Sightglass oil plug Stainless steel sealed cleanout plugs protect and extend bearing life Threaded grease fitting for easy replacement Gear housing designed to mount pump in four positions: Side mount left hand Side mount right hand Lower drive Upper drive Ampco Pumps Company is ISO 91:8 certified. Seal options include single and double mechanical seals, o-ring seals and lip seals Stainless steel splash plates protect the bearing seal and bearing from high pressure cleaning spray Pump housing and cover are constructed of 316L stainless steel ALL ZP PUMPS INCLUDE ALL ZP PUMPS INCLUDE ALL STAINLESS STEEL a stainless steel gearcase, providing high-resistance to corrosion and compatibility with caustic agents. stainless steel cleanout plugs and splash plate. hardware prevents corrosion and stripped bolts.

SERIES PERFORMANCE THE SIMPLE CHOICE FOR SANITARY PROCESSING SAMPLE COMPARISON CHART Ampco s patented Series is CIP-able without modification or loss of efficiency. The front-loading seal design reduces maintenance time and costs. SERIES FEATURES CPM - 36 5 (3.45 BAR) At RPM, the delivers 15% more than the ZP2 and competing pumps (CIP). 1. difference. ZP2 (CIP) 2 Front-loading seals are located closer to the product flow, offering improved CIP-ability with no disassembly required. Front-loading seals allow for ease-of-maintenance and reduced service time. Maintenance personnel no longer need to disconnect the pump from piping. Cover design maximizes exposure of the cover o-ring to the CIP fluid. 12 Free drain design improves CIP-ability while maintaining maximum pump efficiency. 1 CIP holes in rotor ensure turbulent flow to the cover hub. Elimination of dead zones in shaft bore improves cleanability and increases seal life. The pump is mounted on a ZP2 gear case, including shafts, to maximize parts interchangeability. Existing ZP2 pumps (and our competitors similar pumps) can be upgraded to the design with new rotors, seals and re-machining the existing rotor case. CPM 1-1 EHEDG Certified and in conformance with 3A Sanitary Standards and the ATEX Directive. 8 1 RPM 5 (3.45 BAR) At RPM, the delivers 17% more than ZP2 and competing pumps (CIP). 1 difference. ZP2 (CIP) 2 New pumps can be reconditioned 2 to 3 times. 1 RPM PATENTED US Patent SERIES No. 9,273,555 For additional information on the Series and other Ampco products, please visit www.ampcopumps.com. AMPCO ZP SERIES ADVANTAGES Only Ampco ZP pumps offer all of these upgrades at no additional charge Stainless steel gearcase Stainless steel retainers 17-4ph shafts Helical gears 4-way mounting 2-side threaded grease zerks Anti-microbial lube 6 oil fill plugs with sight glass Gasketed stainless steel cleanout plugs and splash plate.

ZP PUMP TECHNICAL DATA ZP1 PUMP PERFORMANCE ZP1 6 15 18 1 22 323 ZP1 34 134 224 324 Standard Optional 7 1 17 36 46 92 313 452 37 1.6 2.3 3.9 8.2 1.4 2.9 71.1 13 84.82.142.29..522.754.616.31.54.11.288 1.9 2.332 15 225 1.3 15.5 1 25 8 7 Rec. Inlet (W x L) Outlet 24 61 28 1 5.5 13.9 23.2 47.2 68.3.521.754 1.972 1.75 x 6.75 2.24 x 8.82 2.97 x 9.25 3.87 x 11 5. x 17. 44 x 171 57 x 224 75 x 235 98 x 279 127 x 441 () () ZP2 / PUMP PERFORMANCE S D R K J M KEY L OAH Q N E J L OPTIONAL FOOT LOCATION OPTIONAL FOOT LOCATION OPTIONAL BOTTOM DRIVE G C P H B F Standard Optional 6 15 18 45 1 18 21 22 8 11 2 36 46 59 92 228 1 313 452 1.8 2.5 4.5 8.2 1.4 13.4 2.9.8 68.4 71.1 13.82.142.29..98..52.522.754.31.54.11.288.371 1.4 1.9 1.9 15 45 45 1.3 31. 31. 1 25 1 8 7 ZP2 34 134 184 214 224 324 24 61 28 1 5.5 13.9 23.2 45.4 47.2 91..52.521.752 1.4 1.9 1.972 2.847 45 31. Rec. Inlet (W x L) 1.81 x 6.84 46 x 174 2.44 x 9. 62 x 229 3.19 x 9. 81 x 2 3.28 x 11.25 83 x 286 3.45 x 12.7 88 x 323 4.6 x 11.25 13 x 286 4.25 x 12.7 18 x 322.5 Outlet () ().4 XP PUMP PERFORMANCE F A XP 245 W. Mill Road Glendale, WI 59 Phone: 8.737.8671 www.ampcopumps.com ZP2 323 42 423 Am Gäxwald 6 863 Herxheim Germany Phone: +49 72 5585 info@ampcopumps.de REV12.18 STD Connection 452 37 6 8 8 13 84 15 145.4 145.4.754.616 1.1 1.62 1.62 2.332 4.1 6.129 6.129 225 15.5 Please visit www.ampcopumps.com for individual pump curves and dimensional drawings.

ZP1 PUMP DIMENSIONS ZP1 A B C D E F G H J K IN 4.75 1.95 3.75 12.4 5.5 1.94 2.31.41, SLOT 2.93 9.61 6 MM.21 5 95 6 1 49 59 1, SLOT 74 244 15 18 IN 4.75 1.95 3.75 12.4 5.5 1.94 2.31.41, SLOT 2.93 9.61 MM 121 5 95 6 1 49 59 1, SLOT 74 244 IN 4.75 2.18 3.75 12.46 5.5 1.94 2.31.41, SLOT 2.93 9.84 MM 121 55 95 316 1 49 59 1, SLOT 74 IN 6.25 2.78 4.25 14.58 6.86 2.31 2.56.41, SLOT 3.56 11.61 MM 159 71 18 37 174 59 65 1, SLOT 9 295 IN 6.25 2.94 4.25 14.96 6.86 2.31 2.56.41, SLOT 3.56 11.99 MM 159 75 18 174 59 65 1, SLOT 9 5 1 22 323 IN 8.25 4.14 5.87 18.91 9.56 3.5 4.12.53 5.6 15.14 MM 21 15 149 48 243 89 15 13 129 5 IN 8.25 4.78 5.87 19.85 9.56 3.5 4.12.53 5.6 15.77 MM 21 121 149 54 243 89 15 13 129 1 IN 8.5 3.69 9. 23.37 12. 3.75 7.25.53, SLOT 6. 18.49 MM 216 94 229 594 314 95 184 13 SLOT 162 47 IN 12. 4.12 11.63.17 8 5.25 8..66, SLOT 6.88 21.92 MM 5 15 295 6 353 133 23 17 SLOT 175 557 IN 12. 4.12 11.63.17 8 5.25 8..66, SLOT 6.88 21.92 MM 5 15 295 6 353 133 23 17 SLOT 175 557 ZP2 PUMP DIMENSIONS ZP2 / A B C D E F G H J K IN 4.75 1.95 3.75 11.8 5.5 1.94 2.31.41, SLOT 2.93 9.61 6 MM 1.21 5 95 1 49 59 1, SLOT 74 244 15 18 45 IN 4.75 1.95 3.75 11.8 5.5 1.94 2.31.41, SLOT 2.93 9.61 MM 121 5 95 1 49 59 1, SLOT 74 244 IN 4.75 2.18 3.75 12.49 5.5 1.94 2.31.41, SLOT 2.93 9.84 MM 121 55 95 317 1 49 59 1, SLOT 74 IN 6.25 2.78 4.25 14.58 6.86 2.31 2.56.41, SLOT 3.56 11.61 MM 159 71 18 37 174 59 65 1, SLOT 9 295 IN 6.25 2.94 4.25 14.87 6.86 2.31 2.56.41, SLOT 3.56 11.99 MM 159 75 18 174 59 65 1, SLOT 9 5 IN 8.25 3.86 5.87 18.56 9.56 3.5 4.12.53 5.6 14.86 MM 21 98 149 471 243 89 15 13 129 377 1 18 22 21 IN 8.25 4.14 5.87 19.32 9.56 3.5 4.12.53 5.6 15.14 MM 21 15 149 491 243 89 15 13 129 5 IN 8.25 4.78 5.87 2.33 9.56 3.5 4.12.53 5.6 15.77 MM 21 121 149 6 243 89 15 13 129 1 IN 8.5 3.45 9. 23.53 12. 3.75 7.25.53, SLOT 6. 18.25 MM 216 88 229 598 314 95 184 13 SLOT 162 4 IN 8.5 3.69 9. 24.27 12. 3.75 7.25.53, SLOT 6. 18.49 MM 216 94 229 616 314 95 184 13 SLOT 162 47 IN 12. 3.45 11.63 27.8 8 5.25 8..66, SLOT 6.88 21.24 MM 5 88 295 688 353 133 23 17 SLOT 175 539 IN 12. 3.84 11.63 27.66 8 5.25 8..66, SLOT 6.88 21.92 MM 5 98 295 73 353 133 23 17 SLOT 175 557 XP PUMP DIMENSIONS XP A B C D E F G H J K 323 42/423 IN 12. 4.12 11.63.17 8 5.25 8..66, SLOT 6.88 21.92 MM 5 15 295 6 353 133 23 17 SLOT 175 557 IN 12. 4.12 11.63.17 8 5.25 8..66, SLOT 6.88 21.92 MM 5 15 295 6 353 133 23 17 SLOT 175 557 IN 12. 4.13 11.63.28 8 5.25 8..66, SLOT 6.88 21.95 MM 5 15 295 9 353 133 23 17, SLOT 175 558 IN 21. 5. 22. 49. 18.75 9. 16.5 1.6 9.75 39.22 MM 533 142 559 12 4 229 419 27 248 996

L M N Port Size P Q Key R S OAH Weight 2.12 2. 4.21 1 2.79.875.1875 3.49 6.97 8. LB 54 17 25 71 22.2 4. 89 177 211 KG 27 2.12 2. 4.21 2.79.875.1875 3.49 6.97 8. LB 54 17 71 22.2 4. 89 177 211 KG 27 212 2. 4.21 3.2.875.1875 3.55 7.9 8. LB 54 17 77 22.2 4. 9 18 211 KG 29 2.62 2.32 5.21 3.84 1.25. 4.25 8.5 1.29 LB 1 67 59 132 98 31.8 6.35 18 216 261 KG 59 2.62 2.32 5.21 4. 1.25. 4.31 8.62 1.29 LB 1 67 59 132 31.8 6.35 19 219 261 KG 3.5 2.25 7.31 5.1 1.625.375 5.37 1.75 15.31 LB 285 89 57 186 127 41.3 9.53 136 273 9 KG 129 3.5 2.25 7.31 5.65 1.625.375 5.37 1.75 15.31 LB 5 89 57 186 144 41.3 9.53 136 273 9 KG 1 4.5 2.75 9. 4.44 2.. 6.63 13.25 19.13 LB 565 114 7 2 113 5.8 12.7 168 337 486 KG 256 5.6 4.6 1. 5.37 2.375.625 8. 16. 22. LB 9 15# FLG 129 13 2 136.3 15.88 23 6 568 KG 8 5.6 4.6 1. 5.37 2.375.625 8. 16. 22. LB 9 15# FLG 129 13 2 163.3 15.88 23 6 568 KG 8 L M N Port Size P Q Key R S OAH Weight 2.12 2. 4.21 1 2.79.875.1875 3.49 6.97 8. LB 56 54 17 25 71 22.2 4. 89 177 211 KG 25 2.12 2. 4.21 2.79.875.1875 3.49 6.97 8. LB 54 17 71 22.2 4. 89 177 211 KG 27 2.12 2. 4.21 3.2.875.1875 3.49 6.97 8. LB 65 54 17 77 22.2 4. 89 177 211 KG 2.62 2.32 5.21 3.84 1.25. 4.25 8.5 1.29 LB 1 67 59 132 98 31.8 6.35 18 216 261 KG 59 2.62 2.32 5.21 4. 1.25. 4.31 8.62 1.29 LB 1 67 59 132 31.8 6.35 19 219 261 KG 3.5 2.25 7.31 4.73 1.625.375 5.37 1.75 15.31 LB 265 89 57 186 12 41.3 9.53 136 273 9 KG 12 3.5 2.25 7.31 5.1 1.625.375 5.37 1.75 15.31 LB 285 89 57 186 127 41.3 9.53 136 273 9 KG 129 3.5 2.25 7.31 5.65 1.625.375 5.37 1.75 15.31 LB 5 89 57 186 144 41.3 9.53 136 273 9 KG 1 4.5 2.75 9. 4.2 2.. 6.53 13.6 19.13 LB 52 114 7 2 17 5.8 12.7 166 332 486 KG 236 4.5 2.75 9. 4.44 2.. 6.63 13.25 19.13 LB 59 114 7 2 113 5.8 12.7 168 337 486 KG 268 5.6 4.6 1. 4.7 2..625 7. 14.75 22. LB 82 129 13 2 119.5 15.88 187 375 568 KG 3 5.6 4.6 1. 5.9 2..625 8. 16. 22. LB 85 15# FLG 129 13 2 129.5 15.88 23 6 568 KG 6 L M N Port Size P Q Key R S OAH Weight 5.6 4.6 1. 15# FLG 5.37 2.375.625 8. 16. 22. LB 9 129 13 2 136.3 15.88 23 6 568 KG 8 5.6 4.6 1. 5.37 2.375.625 8. 16. 22. LB 9 15# FLG 129 13 2 163.3 15.88 23 6 568 KG 8 5.6 4.3 1. 5. 2.375.625 8. 16. 22. LB 11 15# FLG 129 2 137.3 15.88 23 6 568 KG 499 7.69 6.4 14.25 8.35 3.875 1. 11.25 22.5 27.25 LB 2 15# FLG 195 153 362 212 98.43 25.4 286 572 692 KG 1179