WL70 Articulated Wheel Loaders The powerhouse Thanks to the latest engine technology pursuant to the latest exhaust emission standard, the WL70 offers an extremely efficient, but also powerful engine that makes the wheel loader a powerhouse in action. This is being supported by a very robust, powerful load-arm design, which makes a quick and efficient materials handling possible. All electrical functions of attachment tools can optionally be operated by joystick. This increases efficiency and allows faster workflows. Powerful Perkins engine with 55.4 kw or optionaly 90 kw and SCR system (Selective Catalytic Reduction) 3.5 inch color display with many functions and clear control lights 40 km/h variant due to larger motors with higher torque (optional) Optional on-roof climate control for more operator comfort Optimized use of attachment tools by oil level regulation, high flow option and continuous function for the 3rd and 4th control circuits Engine Perkins engine with 55.4 kw performance, emissions standard level III B Optionaly available version with 90 kw performance which meets the requirements of emission standard level IV (after treatment by DOC and SCR-cat), ideal for inner city operation and with economical fuel consumption More about emission standard levels: www.wackerneuson.com/engines wackerneuson.com compiled on 30.10.2017 Page: 1
Inch brake pedal Full power for the hydraulics and at the same time reducing the travel speed: To do this, you only need one pedal with the Wacker Neuson wheel loaders. You can regulate both mechanical as well as hydraulic braking ("inching") via the brake-inch pedal. The advantages are obvious: less wear of the service brake and optimal power distribution of the engine output. No pressure on inch brake pedal: full power for the drive system Slightly depressed brake-inch pedal: The speed is reduced, more power to the work hydraulics. Further depressed brake-inch pedal: The speed is reduced further, even more power to the work hydraulics Further depressed brake-inch pedal: The wheel loader stands still, full power to the work hydraulics wackerneuson.com compiled on 30.10.2017 Page: 2
The articulated pendulum joint The guarantee for the best possible stability and maneuverability. Due to the joint, all four wheels remain in constant contact with the ground and the machine moves with maximum traction. In addition, the machine is therefore uniquely maneuverable. It is capable to turn curves at an angle of up to 45 degrees. Easy maintenance and service access Tiltable cabin for quick and easy access to the engine, hydraulic system and electrical system. Engine hood can be opened in just one step for service and maintenance access to the hydraulic oil tank, air cleaner, engine oil, oil dipstick and cooling water. Maintenance and service made extremely easy! wackerneuson.com compiled on 30.10.2017 Page: 3
Driver's cabin Ergonomic workplace: plenty of legroom, clearly arranged combi-instruments, comfortable air suspension seat and an adjustable joystick console. Large glass windows on all sides for an optimal overview of the work area. Cabin door can be opened 180. Jog Dial Pre-setttings can be defined, stored, and retrieved simply by pushing a button e.g. flow rate of hydraulic oil, Continuous function for hydraulic attachment tools and many more wackerneuson.com compiled on 30.10.2017 Page: 4
Differential lock The connectable 100% differential lock engages in order to work reliably on difficult terrain. The result: maximum shear forces with excellent ground grip. During normal driving, the lock is not connected. This protects the tires from wear. Tires Everything runs perfectly if the wheel loader and tires are optimally matched to the substrate and application area. Four treads are available to choose from at Wacker Neuson: RP tread: Suitable for application on lawns. The ground is not disturbed due to the large contact surface. AS tread: With tapered slats that are suitable for particularly greasy and heavily soiled floors. wackerneuson.com compiled on 30.10.2017 Page: 5
EM tread: With almost parallel slats for loose grounds like sand, gravel or crushed stone. This type of tire achieves a large contact surface, thereby achieving a high shear force transmission and is very quiet on the road. MPT tread: Offers the perfect combination of good traction in uneven terrain as well as quick road crossings. Multiuse tread: for mixed all-year use and various climatic conditions. High traction on loose ground as well as good stability on snow and slippery surfaces. SureTrax tread: large contact areas, high load carrying capacity, ideal for fixed and other hard surfaces. wackerneuson.com compiled on 30.10.2017 Page: 6
Technical specifications Engine standard Engine optional Engine / Motor Engine / Motor manufacturer Perkins Perkins Engine / Motor type 854E-E34TAWF 854E-E34TAWF Cylinder 4 4 Engine performance (standard) kw 55.4 90 at rpm Maximum rpm 2,200 2,200 Displacement cm³ 3,400 3,400 Coolant type Water / charge air Water / charge air Electrical system Operating voltage V 12 Battery Ah 95 Alternator A 120 Weights Operating weight kg 7,140 Tipping load with bucket - machine straight kg 4,762 Tipping load with bucket - machine at angle kg 3,926 Tipping load with pallet fork - machine straight kg 4,254 Tipping load with pallet fork - machine at angle kg 3,559 Vehicle data Bucket capacity Standard bucket m³ 1.1 Traction drive Hydrostatic via universal joint shaft Axles PA1422 Drivers cab Cabin Speed (optional) km/h 0-20 (30) Speed Level 2 Standard tires 405/70 R 18 EM ET0 Hydraulic system Driving hydraulics - operating pressure bar 445 Operating hydraulics - operating pressure bar 210 Operating hydraulics - discharge capacity l/min 100 Operating hydraulics - discharge capacity (optional up to) l/min 150 Filling capacities wackerneuson.com compiled on 30.10.2017 Page: 7
Engine standard Engine optional Fuel tank capacity l 105 Hydraulic oil tank l 95 Sound level Guaranteed sound power level LwA db(a) 103 Specified sound pressure level LpA db(a) 78 Standard bucket = digging bucket, 2,000 mm width Tipping load calculation according to ISO 14397-EN474-3 wackerneuson.com compiled on 30.10.2017 Page: 8
Dimensions Standard tires 405/70 R 18 EM ET0 A Overall length 5,898 mm B Overall length without bucket 4,780 mm C Bucket pivot point to axle center 991 mm D Wheelbase 2,150 mm E Rear overhang 1,676 mm F Height With cabin 2,693 mm H Seat height 1,609 mm J Total operating height 4,536 mm K Stroke height max. - bucket pivot point 3,686 mm wackerneuson.com compiled on 30.10.2017 Page: 9
L Overhead loading height 3,375 mm M Dump height max. 2,840 mm N Range with M 799 mm O Scraping depth 73.5 mm P Overall width 1,829 mm Q Track width 1,422 mm S Ground clearance 375 mm T Radius maximum 4,341 mm U Radius at outer edge 3,686 mm V Inside turning radius 1,666 mm W Articulation angle 42 X Bucket rollback at max. stroke height 33 Y Dump angle Maximum 33 Z Bucket rollback at ground level 39 All values with standard bucket: Digging bucket 2,000 mm, 1.1 m³ and standard tires: 405/70 R 18 EM ET0 Please note that product availability can vary from country to country. It is possible that information / products may not be available in your country. More detailed information on engine power can be found in the operator's manual; the stated power may vary due to specific operating conditions. Subject to alterations and errors excepted. Applicable also to illustrations. Copyright 2017 Wacker Neuson SE. wackerneuson.com compiled on 30.10.2017 Page: 10