4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for fi nal selection. USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359 3
60 Hz Performance 750 RPM Catalog Number ES5M ES6M ES7M ESM ES9M PSI (kpa) Feet (m).6 (59) 20 (6) 5.6 (.35).0 7.2 () 40 (2) 4.9 (.30).2 60Hz - PERFORMANCE AND SELECTION CHART Capacity in at Total Head in Feet (m) or Pressure Shown 26 (79) 60 () 4.2 (.26).5 43.3 (29) 00 (30) 3.2 (.20).22 54. (373) 25 (3) 2. (.7).2 64.9 (447) 50 (45) 75. (522) 75 (53) 6.6 (597) 200 (60) 97.4 (67) 225 (6) 0.3 (746) 250 (76) 9. (2) Motor Size /4 HP /3 HP /2 HP 3/4 HP 7.7 (.4).5 6.9 (.43).20 6.2 (.39).25 5.0 (.3).35 4.4 (.27).42 2.4 (.5).35 3.9 (.24).4 Motor Size /4 HP /2 HP 3/4 HP HP 0.5 (.66).20 9.4 (.59).2.6 (.54).32 7.2 (.45).4 6.5 (.4).55 5.9 (.37).64 2. (.3).4 3.6 (.22).52 5.4 (.34).75 Motor Size /4 HP /3 HP /2 HP 3/4 HP HP ¼ HP ½ HP 2 HP 2. (.76).35.2 (.70).42 0.3 (.64).50.9 (.56).65.2 (.5).75 7.5 (.47).5 Motor Size /2 HP 3/4 HP HP ½ HP 2 HP 4.5 (.9).40 3. (.2).52 2. (.76).6 0.4 (.65).0 9.6 (.60).90. (.55).05 Motor Size /2 HP 3/4 HP HP ½ HP 2 HP 3 HP 6. (.42).95.2 (.5).5. (.).4 3.2 (.20).5 4. (.30).5 6.2 (.39).0 7.5 (.47).30.6 (.0).52 2.9 (.).62 4.4 (.27).92 5.6 (.35).20 6.9 (.43).42.4 (.0).59 2.6 (.6).65 4.0 (.25).0 5.0 (.3).35 6.3 (.39).60 275 (3).2 (.07).65 2.4 (.5).70 3.5 (.22).20 4.5 (.2).5 5.7 (.35).75 30 (96) 300 (9).0 (.06).69 2. (.3).7 3. (.9).35 4.0 (.25).6 5.2 (.32).90 40. (965) 325 (99) 2.7 (.7).50 3.6 (.22).75 4. (.30) 2.0 5. (045) 350 (06) 2.3 (.4).70 3. (.9).95 4.2 (.26) 2.35 3450 RPM Catalog Number ES5M ES6M ES7M ESM ES9M PSI (kpa) Feet (m).6 (59) 20 (6) 0. (.6).60 7.2 () 40 (2) 0.4 (.65).65 60Hz - PERFORMANCE AND SELECTION CHART Capacity in at Total Head in Feet (m) or Pressure Shown 26 (79) 60 () 0.0 (.63).70 43.3 (29) 00 (30) 9.2 (.5).0 54. (373) 25 (3). (.55).9 64.9 (447) 50 (45).6 (.54).9 75. (522) 75 (53) 6.6 (597) 200 (60) 97.4 (67) 225 (6) 0.3 (746) 250 (76) 9. (2) 275 (3) 30 (96) Motor Size 3/4 HP HP ½ HP 2 HP 5.6 (.9).5 5.2 (.95).90 4.6 (.92).00 3.5 (.5).20 2.9 (.).35 2.4 (.7).45 Motor Size HP ½ HP 2 HP 3 HP 20.0 (.26).30 9.6 (.23).3.7 (.7).55 7.3 (.09).0 6.6 (.04).95 5.9 (.00) 2.2 Motor Size ½ HP 2 HP 3 HP 5 HP 26.2 (.65).60 25.6 (.6).70 24.5 (.54).0 22.9 (.44) 2.20 22.0 (.3) 2.40 2.2 (.33) 2.60.3 (.52).0.9 (.75).60 5.3 (.96) 2.2 20.5 (.29) 2.0.0 (.50).20.6 (.73).70 4. (.93) 2.45 9. (.24) 3.00 7. (.49).30.2 (.70).5 4.3 (.90) 2.60 9.2 (.2) 3.30 7.6 (.47).4 0. (.6).95 3. (.7) 2.0.5 (.6) 3.60 7.4 (.46).52 0.4 (.65) 2.0 3.3 (.3) 2.95.0 (.3) 3.0 Motor Size 2 HP 3 HP 5 HP 32.0 (2.0) 2.00 3.5 (.9) 2.0 30.5 (.92) 2.30 2.6 (.6) 2.70 27.5 (.73) 3.00 26.5 (.67) 3.20 25.6 (.6) 3.50 300 (9) 7.2 (.45).75 0. (.63) 2.20 2. (.0) 3.5 7.4 (.09) 4.0 40. (965) 325 (99) 7. (.44).5 9. (.6) 2.30 2.5 (.7) 3.25 6.9 (.06) 4.40 5. (045) Motor Size 2 HP 3 HP 5 HP 7½ HP 24.7 (.55) 3.70 23.9 (.50) 3.90 23.0 (.45) 4.20 22.2 (.40) 4.40 2.5 (.35) 4.60 20.7 (.30) 4.90 350 (06) 7.0 (.44) 2.00 9.5 (.59) 2.50 2. (.75) 3.5 6.4 (.03) 4.90 20.0 (.26) 5.0 NOTE: When pumping hot water over 0ºF (2.2ºC), check the NPSH available in the pumping system against the required pump NPSH shown on pump performance curves. Available NPSH must be greater than required NPSH. 4 USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359
50 Hz. Performance 50Hz - PERFORMANCE AND SELECTION CHART Capacity in at Total Head in Feet (m) or Pressure Shown Catalog Number PSI (kpa) Feet (m) 3 (9) 30 (9) 7.2 () 40 (2) 26 (79) 60 () 43.3 (29) 00 (30) 54. (373) 25 (3) 64.9 (447) 50 (45) 75. (522) 75 (53) 6.6 (597) 200 (60) 97.4 (67) 225 (6) 0.3 (746) 250 (76) 9. (2) 275 (3) 30 (96) 300 (9) 40. (965) 325 (99) 5. (045) 350 (06) ES5M.2 (.5).990.0 (.50).99 7.5 (.47).994 6.6 (.4).996 6.0 (.37).99 5.6 (.35).00 5.2 (.32).05 4. (.30). 4.0 (.25).23 3.5 (.22).33 3.0 (.).43 2.5 (.5).5 Motor Size HP ½ HP ES6M.0 (.69).990 0.5 (.66).993 0.3 (.64).996 9.2 (.5).06 9.0 (.56).09.3 (.52).4 7. (.49).5 7.3 (.46).24 6. (.42).34 6.2 (.39).49 5.5 (.34).6 5.0 (.3).77 4.5 (.2).7 4.0 (.25).9 2900 RPM Motor Size HP ½ HP 2 HP ES7M 5.0 (.94).94 4.5 (.9).05 4.0 (.).3 3.2 (.3).33 2. (.0).42 2.2 (.76).55.7 (.73).63.2 (.70).75 0.5 (.66).9 0.0 (.63) 2.0 9.5 (.59) 2.2 9.0 (.56) 2.5.3 (.52) 2.3.0 (.50) 2.94 Motor Size HP ½ HP 2 HP 3 HP ESM 9.2 (.2).27 9.0 (.9).3.4 (.6).55 7.5 (.0).0 7.0 (.07).90 6.5 (.04) 2.02 6.0 (.00) 2.07 5.3 (.96) 2.2 5.0 (.94) 2.27 4.5 (.9) 2.52 4.0 (.) 2.74 3.3 (.3) 3.9 3.0 (.2) 3.39 2.2 (.76) 3.95 Motor Size ½ HP 2 HP 3 HP 5 HP ES9M 22.5 (.4).5 22.3 (.40).55 22.0 (.3).63 20.5 (.29) 2.09 20.0 (.26) 2. 9.3 (.2) 2.35.5 (.6) 2.50.0 (.3) 2.6 7.3 (.09) 2.65 7. (.2) 2.3 6.0 (.00) 3.4 5.0 (.94) 3.9 4.5 (.9) 4.7 3.7 (.6) 4.42) Motor Size ½ HP 2 HP 3 HP 5 HP NOTE: When pumping hot water over 0ºF (2.2ºC), check the NPSH available in the pumping system against the required pump NPSH shown on pump performance curves. Available NPSH must be greater than required NPSH. USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359 5
Features MAXIMUM OPERATING CONDITIONS TEMPERATURE 225ºF (07ºC) (For Standard Buna-N Seal) INLET PRESSURE 00 PSI (69kPa) CASING WORKING PRESSURE 250 PSI (723kPa) BURKS exclusive, unique regenerative type turbine pumps are designed to handle clear water and many other non-abrasive, lower viscosity liquids on high pressure, low capacity applications with the greatest possible effi ciency. BURKS is the only turbine pump with Life-Lok External Impeller Adjustment feature that allows readjustment of impeller without disturbing piping, disassembling pump or replacing parts. Gives up to 40% longer service life than turbine pumps of other designs.coupling guard furnished on all complete Base- Mounted units manufactured by Burks Pumps. Not furnished with purchase of pump only, but required. QUALITY FEATURES: Self-Priming Compact, space-saving size Dependable carbon/ceramic mechanical shaft seal for temperatures to 225 F (07 C). Bronze impeller with Monel blades - the only moving part Bronze raceway with cast-in vortex pockets - will not vapor lock #303 Stainless Steel pump shaft Easy to service Every pump factory tested Available Bronze fi tted, all Bronze, Stainless Steel FOR TEMPERATURES TO 500 F (260 C) Series ES Pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fl uids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffi x J to pump catalog number for temperatures below 400 F (204 C) and add suffi x JK to pump catalog number for temperatures over 400 F (204 C). Example: ES6MJ. See Section on High Temperature Pumps for more information. PART MATERIALS OF CONSTRUCTION BRONZE FITTED ALL BRONZE STAINLESS STEEL Bearing Cast Iron Cast Iron Cast Iron Housing Adapter Cast Iron Bronze #36 Stainless Case Cast Iron Bronze #36 Stainless Raceway Bronze Bronze #303 Stainless Impeller Bronze (Monel Blades) Bronze (Monel Blades) #303 Stainless Shaft #303 Stainless #303 Stainless #303 Stainless Shaft Seal Carbon-Ceramic SS - Buna-N Carbon-Ceramic SS - Buna-N Carbon-Ceramic SS - Buna-N WARNING: CANCER AND REPRODUCTIVE HARM - WWW.P65WARNINGS.CA.GOV 6 / USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359
Dimensions A B CP CP 5 (26) 5½ (39) (34) DIMENSIONS IN INCHES (mm) D DD E F G H K K2 L L 3½ () 3⅛ (79) 2 (50) 3⅜ (5) ½ (3) ½ (3) ⅝ (4) ¹¹ ⅜ (22) ¹³ O P S U V X Y Y 6¾ (7) ¹ (27) ³ (30) ¾ (9) 2¼ (57) (2) Motor Frame 56 --- 43T 45T 2T 4T 23T 25T AB C CP 6 3 (57) 6 3 (57) ¼ (209) ¼ (209) ¼ (209) ¼ (209) (3) 0 (27) (27) 2¾ (323) 3¾ (349) 5¾ (400) 7¼ (43) (34) (34) (34) (34) (34) (34) (34) CP HA HB HC (203) (203) (203) 0 (254) 0 (254) (279) (279) 22 (55) 22 (55) 22 (55) 25 (635) 25 (635) 2¾ (730) 2¾ (730) 2 3 (75) 26⅜ (669) 27⅜ (695) 2 (72) 29 (754) 3 (04) 33 3 (42) HC 2⅝ (727) 26 3 (6) 27 3 (706) 29⅛ (740) 30⅛ (765) 32⅛ (790) 33⅝ (54) DIMENSIONS IN INCHES (mm) HD HE HF HG HH HL 6 (52) 6 (52) 6 (52) 7 (77) 7 (77) 7¾ (96) 7¾ (96) 3 (76) 3 (76) 3 (76) 4 (0) 4 (0) 4½ (4) 4½ (4) 20 (50) 20 (50) 20 (50) 23 (54) 23 (54) 26¾ (679) 26¾ (679) (7) (7) (7) (7) (7) (7) (7) 5 (2) 5 (2) 5 (2) 5 (2) 5 (2) 5 (2) 5 (2) HL 3 3 3 3 3 3 3 HM HO HP HT X Y 9 3 (233) 9½ (24) 9½ (24) ½ (292) ½ (292) 3 (33) 3 (33) 9¼ (234) 9¼ (234) 9¼ (234) 0¼ (260) 0¼ (260) (279) (279) 9 (4) 9 (4) 9 (4) 3 (20) 3 (20) 3 (20) 3 (20) (2) (2) (2) (2) (2) (2) (2) Y A strainer, approximately 20 mesh, should be installed on the suction side of the pump to prevent chips, scale or hard foreign particales from entering the pump and damaging the raceway and impeller. USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359 7 6/3
60 Hz Performance USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359
60 Performance USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359 9
60 Hz Performance 20 USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359
60 Hz. Performance USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359 2
60 Hz. Performance 22 USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359
50 Hz. Performance USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359 23
Series: ES 50 Hz. Performance 24 USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359
50 Hz. Performance USA: (937) 77-947 Canada: (905) 457-6223 International: (937) 65-359 25