RIL 4 RP4D TELESOPI LED. REESSED PERIMETER. DIRET PRT #: PREP Y: PROJET: NOTES: DTE: PPROVL SIGNTURE: DTE (DD/MM/YYYY): PERFORMNE SUMMRY @ 3500K Lumens Meta lanc Meta lanc w/ symmetric 80 RI 596 662 90 RI 522 579 Wattage 6. 6. L70 Estimate (h) 80 RI 99 09 90 RI 86 95 60,000 hrs See page 2 for the complete Light Level Performance chart. FETURES vailable in both flush and 3" regressed 0-0V standard dimming ontinuous runs and 90 degree corners available Each specified run includes a telescopic section that adds up to 2 inches. Luminaire Telescopic ft max. ORDERING LOGI Example Part Number: RP4D-5K-8-M-W--D--D-90 RP4D 2 3 4 5 6 7 8 9 0. SERIES 2. OLOR TEMP 3. LENGTH** 4. PTTERN 5. OPTIS 6. FINISH 7. LIGHT LEVEL / DRIVER RP4D 0K 5K L40K 3000K 3500K 4000K 90 RI is available under OPTIONS XX Total Length (in ft) Minimum length of. None (leave space empty) Each specified run includes a telescopic section. G Gx Uxx Lx Square Rectangle U-Shape L-Shape ustom Pattern* None (leave space empty) Standard Patterns - drawing of pattern configuration is required on page 3. M M Meta lanc Meta lanc w/ symmetric Meta lanc: Opal diffuse lens W White ustom Finish Specify RL: L L2 L4 Select Driver below. See Light Level Performance chart on p2. G G U L Square Rectangle U-Shape L-Shape = min. Select corner: = min. = min. = min. = min. = min. = min. = min. Outside 90 Inside 90 WLL 8. IRUITRY 9. MOUNTING 0. VOLTGE. OPTIONS EM ircuit Emergency / Night Light* Emergency attery Pack* Select Driver: T T3 D D3 K K3 Recessed T-ar Flush Recessed T-ar Regressed 3" Recessed Drywall Flange Flush Recessed Drywall Flange Regressed 3" Drywall Spackle Flange Drywall Spackle Flange Regressed 3" Factory option 0-0V (Standard) Factory option % dimming LHE Lutron H-Series Hi-lume % EcoSystem LED Driver* LE Lutron -Series Hi-lume % EcoSystem LED Driver* L3 Lutron -Series Hi-lume % 3-wire LED Driver* L2 Lutron -Series Hi-lume % 2-wire LED Driver* L5E Lutron 5-Series EcoSystem LED Driver* 2 3 4 20 V 277 V 347 V UNV (20-277V) *onsult factory. **ertain lengths may include up to 2 telescopic sections. Pattern record drawings showing locations will be sent out upon order. 90 P S 90 RI, High R9 Plenum Standard Lengths Only (No Telescopic Sections) None (leave space empty) Page of 5
Light Level Performance 3500K, 80 RI, 0-0V Dimming (Standard) Optics M M Light Level Lumens Wattage (LPW) Lumens Wattage (LPW) L 350 3.5 00 343 3.5 98 L2 439 4.4 99 429 4.4 97 596 6. 99 583 6. 96 L4 06 2.5 89 08 2.5 87 Lumen djustment Factor olor Temp 80 RI 90 RI 3000K 0.984 0.873 3500K.000 0.875 4000K.032 0.879 TELESOPI SETION LENGTHS TL2+ 2 TELESOPI Min 2ft nom. Max 3ft nom. Telescopic section can be adjusted from 0 to 2. Only one end can be extended. 2 T+ TELESOPI Min 3ft nom. Max 4ft nom.telescopic section can be adjusted from 0 to 2. Only one end can be extended. 2 TL4+ TELESOPI Min 4ft nom. Max 5ft nom. Telescopic section can be adjusted from 0 to 2. Only one end can be extended. STNDRD SETION LENGTHS Standard 2, 3, 4, 5, 8, 0, 2 and inside/outside corners can be combined to make continuous rows or patterns. Page 2 of 5
PTTERN ONFIGURTION EXMPLES 9 in orner (2 x 2 ) Standard Section 9 ft in 0 ft in 6 ft 7 in Telescopic Section Wall 6 in PTTERNS - pattern configuration drawing is required in the grid below. Page 3 of 5
STNDRD LK - LINE RE - GROUND VIOLET - DIM(+) GREY - DIM(-) TTERY PK LK - LINE RE - GROUND RED - UNSWITHED HOT EMERGENY LK - LINE RE - GROUND ROSS SETIONS 95 [3.7] 95 [3.7] 78 [7.0] 02 [4.0] 0 [0.4] 7 [4.6] 0 [0.4] 76 [3.0] 0 [0.4] 7 [4.6] 0 [0.4] Symmetric symmetric Symmetric symmetric Wall must be finished at least 6" above the ceiling height before regressed fixture is mounted. SPEIFITIONS Due to the ontinuous Improvement Policy at Metalumen, we reserve the right to change our specifications without notice. Housing: Rigid extruded aluminum body, 2.0mm (0.08 ) nominal wall thickness. 95mm (3.7 ) wide x 02mm (4.0 ) high, not including height of Fascia (add up to 4 ). End caps, reflectors: Formed steel. Telescopic portions can be quickly and easily cut to length in the field. Optical System: Optical System MetaLED mid flux LED technology transmits to an internal high performance, side-kicking reflector that then passes through our Meta lanc acrylic diffuser for smooth distribution. This creates a continuum of smooth consistent light. RI: Minimum 80 RI. 90 RI is Flush Regressed 3 available as an option for superior colour rendering capability. Lumen Maintenance: Minimum 50,000h with TM-2 lumen maintenance of 85% @ 24 ambient temperature (calculated based on IESN LM-80-08 LED test data). L70: 60,000hrs. Finish: Standard white finish. For custom finish, contact factory. Weight: See RP4D Weights chart below. Mounting: Mounting brackets provided. For 9/6 and 5/6 T-ar. Wall must be finished at least 6 above the ceiling before fixture is mounted. Electrical: Fixtures are all factory pre-wired for easy connection and installation. Integral driver configuration is factory pre-wired and includes wire quick disconnectors. Power connection enters into driver box through liquid tight cord grip supplied by others. Drivers: OSRM OTi 50 and 85W drivers. Metalumen offers dimming drivers as a standard on our entire LED product offering at 0-0V. Dimming is 0%-00% range. Power factor is > 90% with a lass 2 rating. Lutron Driver Options: Lutron drivers are available as an option to enable the integration of the fixture into an existing Lutron EcoSystem control setup. lternately, eldoled drivers provide DMX and DLI connectivity. Fulham and Philips Emergency drivers can provide up to 90 minutes of emergency lighting in the event of power failure. onsult factory for Lutron LED driver options: LHE H-Series Hi-lume % EcoSystem LE -Series Hi-lume % EcoSystem L3 -Series Hi-lume % 3-wire L2 -Series Hi-lume % 2-wire L5E 5-Series EcoSystem pprovals: UL listed. Plenum - E approved. Environment: Suitable for dry locations. RP4D WEIGHTS for 4 LONE SETIONS Meta lanc w/ Symmetric Meta lanc w/ symmetric Flush 5.30 kg [.7 lbs] 5.27 kg [.6 lbs] 3 Regressed 6.55 kg [4.4 lbs] 6.52 kg [4.3 lbs] WRRNTY Metalumen will warrant defective luminaires for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specification. If defective, Metalumen will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Metalumen. Page 4 of 5
PHOTOMETRI DT - 3500K, 80 RI Optics: Meta lanc IES File: RP4D-5K-4-M- Lumens: 596/ft Wattage: 6./ft : 99 PHOTOMETRI URVE 00% Down 09 83 554 277 ZONL LUMEN SUMMRY Zone Lumens %Fixt 0-20 385 6.2 0-30 794 33.3 0-40 250 52.4 0-60 202 84.8 0-80 2358 98.9 0-90 2385 00 0-90 2282 95.7 20-40 865 36.3 20-50 293 54.2 40-70 998 4.8 60-80 336 4. 70-80 0 4.6 80-90 27. 90-0 0 0 90-20 0 0 90-30 0 0 90-50 0 0 90-80 0 0 0-80 0 0 0-80 2385 00 OEFFIIENTS OF UTILIZTION Zonal avity Method Effective Floor avity Reflectance =.20 R 80 70 50 RW 70 50 30 0 70 50 30 0 50 30 0 RR 0 9 9 9 9 6 6 6 6 0 06 02 98 07 03 00 97 99 96 94 2 0 93 87 82 98 9 86 8 88 83 79 3 93 83 75 69 90 8 74 69 78 72 67 4 85 74 66 60 83 73 65 59 70 64 58 5 79 67 58 52 77 66 58 52 63 56 5 6 73 60 52 46 7 59 5 46 58 5 45 7 68 55 47 4 66 54 46 4 53 46 40 8 63 50 42 37 62 50 42 37 49 4 36 9 59 47 39 33 58 46 38 33 45 38 33 0 56 43 35 30 55 43 35 30 42 35 30 LUMINNE DT (D/M 2 ) 0 45 90 45 303 3697 6600 55 2032 2640 5558 65 243 663 4329 75 573 87 2902 85 29 9 82 NDEL DISTRIUTION 0 22.5 45 67.5 90 0 09 09 09 09 09 5 080 064 08 077 04 0 048 047 046 064 054 5 00 996 008 000 08 20 933 950 95 962 958 25 87 875 893 899 90 30 778 798 82 829 843 35 689 708 732 753 763 40 604 62 642 669 686 45 520 529 556 584 595 50 427 438 464 492 505 55 345 358 384 407 420 60 268 280 299 325 338 65 202 206 226 247 254 70 4 45 59 74 8 75 87 92 00 6 80 46 49 54 58 6 85 7 9 20 22 24 90 4 4 4 5 6 Optics: Meta lanc w/ symmetric IES File: RP4D-5K-4-M- Lumens: 583/ft Wattage: 6./ft : 96 PHOTOMETRI URVE 00% Down 057 792 528 264 ZONL LUMEN SUMMRY Zone Lumens %Fixt 0-20 357 5.30 0-30 742 3.8 0-40 83 50.7 0-60 955 84 0-80 2306 99 0-90 2334 00 0-90 2240 96 20-40 826 35 20-50 250 54 40-70 006 43 60-80 35 5 70-80 6 5 80-90 28 90-0 0 90-20 0 90-30 0 90-50 0 90-80 0 0-80 0 0 0-80 2335 00 OEFFIIENTS OF UTILIZTION Zonal avity Method Effective Floor avity Reflectance =.20 R 80 70 50 RW 70 50 30 0 70 50 30 0 50 30 0 RR 0 9 9 9 9 6 6 6 6 0 05 0 98 07 03 99 96 99 96 93 2 00 93 86 8 98 9 85 80 87 82 78 3 92 82 74 68 90 8 73 68 78 72 66 4 85 73 65 59 82 72 64 58 69 63 57 5 78 66 57 5 76 65 57 5 63 56 50 6 72 60 5 45 70 59 50 45 57 50 44 7 67 54 46 40 66 53 45 40 52 45 39 8 63 50 4 36 6 49 4 36 48 4 35 9 59 46 38 32 57 45 37 32 44 37 32 0 55 42 35 29 54 42 34 29 4 34 29 LUMINNE DT (D/M 2 ) 0 45 90 45 2285 2902 6249 55 623 2084 5339 65 056 383 422 75 53 705 287 85 52 85 202 NDEL DISTRIUTION 0 22.5 45 67.5 90 0 99 99 99 99 99 5 954 927 952 974 999 0 905 903 920 936 966 5 820 88 85 895 933 20 730 758 796 843 893 25 678 684 70 767 844 30 605 68 660 707 785 35 529 539 580 644 78 40 460 468 507 57 648 45 392 403 437 498 563 50 33 346 376 46 482 55 275 283 303 353 403 60 220 226 246 278 322 65 72 78 88 25 247 70 9 23 33 55 77 75 80 83 86 0 5 80 46 47 49 54 60 85 20 9 9 22 24 90 3 3 2 3 3 Photometric performance is measured and scaled in accordance with IESN LM-79. Page 5 of 5