Air Flow Solutions ommercial Fans Offices, retail, leisure, education
ommercial Fans Why Ventilate? AIRF'S extensive range of extract fans are not just for domestic dwellings. Their outstanding performance, ease of installation and aesthetic appeal ensures that they can efficiently complement virtually any installation and help comply with the Building Regulations for non-domestic installations. KEEP UP TO ATE Refer to the IBSE guidelines for recommended air changes per hour in nondomestic installations - see page 22. Aventa Silent In-Line fans can be used in the ceiling void to ventilate areas that require a ducted application. The perfect choice for ventilation where a ducted solution is required. As the fan is mounted in the ceiling void, noise levels are kept to a minimum in the room. Aventa Turbo For the latest ventilation news, information, product data and application advice LIK ALL VISIT airflow.com Airflow Airflowevelopments1 Airflowevelopment Ltd In-Line fans which use centrifugal fan technology offering increased pressure performance for larger spaces and commercial applications. The noise level is not an issue as the fan is located in the ceiling void above the area being ventilated. Fine Art Images reproduced by kind permission of the artist, Sunnie Kanani. Visit www.sunnie.co.uk ustomer Services 1494 568 3 airflow.com
Aventa In-Line Light commercial ventilation Key Features Models In-Line mixed flow fan Flow rate up to 52 m 3 /hr esigned for ducted installations Basic Basic remote switching Timer Timer can be set to run on between 2 and 3 minutes High pressure, low noise ompact and quiet in operation Two speed (normal and boost) Adjustable overrun timer version Technical ata Access to monitor and impeller without dismantling ductwork Low watt motor 3w Specification Aventa 15B Aventa 15T Air flow m 3 /hr 45 / 52 45 / 52 Air flow l/sec 112 / 144 112 / 144 IPX4 rating omplies with Building Regulations 3 year warranty Fan type Mixed Flow Mixed Flow ontrols Basic Timer Mounting In-Line In-Line Sound Pressure db(a)@3m 33 / 44 33 / 44 Power watts 3 / 6 3 / 6 Amps.17 /.27.17 /.27 Aventa In-Line range The Aventa range provides compact, quiet and powerful remote mounted ventilation for ducted installations. Available in high performance, two speed versions they are less bulky than larger in-line centrifugal fans and can be installed in loft spaces or service shafts for remote extraction. With high flow/high pressure development characteristics they can be used with flexible ducting and flat duct systems to ensure compliance with Building Regulations guidance ensuring installed performance and extraction conditions are met. ombining two Aventa fans allows for even more powerful operation. Mounting in parallel (left hand image on facing page) doubles the air flow, whilst two fans in series (right hand image on facing page) leads to a doubling of the air pressure for longer duct runs. Building Regulations AF Yes Yes uct diameter (mm) 15 15 Voltage 23v / 1ph / 5Hz 23v / 1ph / 5Hz Rating IPX4 IPX4 Material finish ABS ABS Weight (kg) 3.4 3.4 imensions (H x W x ) mm 25 x 295 x 185 251 x 295 x 185 Part No. 94189 9419 imensions (mm) B E Ø Performance 35 3 A STATI PRESSURE (Pa) 25 2 15 1 Model A B E AV15 148 295 25 25 185 5 5 1 15 2 l/sec 1 2 3 4 5 6 7 3 m /hr ontrols and Accessories ouble the flow - mount in parallel ouble the pressure - mount in series A range of accessories including flexible and rigid ducting kits, controls and grilles are available. 4 Airflow airflow.com ustomer Services 1494 568 5 airflow.com
Aventa Silent omestic and light commercial facilities Key Features Models Aventa Silent The durable external casing is made of polymer coated steel. The inner casing perforation let s sound waves pass through the holes and fall at a specific angle to the sound absorbing layer. The casing is internally heat and sound insulated with a 5mm mineral layer and the conic impeller with special blade profiling increases air flow speed and provides higher pressure. The diffuser, specially profiled impeller and directing vanes at the outlet from the fan casing distribute air flow in such a way as to attain the best combination of performance and pressure at low noise levels. In-Line mixed flow fan High performance characteristics - powerful air flow (up to 12 m³/hr) and high pressure Sound insulated casing - ensures silent operation ompatible with ducting 1-2mm dia Energy efficient 2 speed motors Adjustable overrun timer version IPX4 rating omplies with Building Regulations 3 year warranty The fans can be mounted at any place or angle within the ductwork. Several fans can be installed in parallel in the same system to achieve a higher air capacity or in series to achieve higher pressure. To ventilate premises with high demands for permanent temperature control eg. Greenhouses, an optional electronic temperature and speed control module is available. Recommended as a component of an air handling systems for commercial and industrial premises where noise levels need to be kept to a minimum, for example, libraries, conference rooms, educational institutions and crèches. STATI PRESSURE (Pa) 8 6 4 2 Basic ontrol by optional switch Technical ata Specification Aventa Silent AVS1 Aventa Silent AVS125 Aventa Silent AVS15 Aventa Silent AVS2 Air flow m 3 /hr 17 / 24 23 / 34 45 / 555 81 / 12 Air flow l/sec 47 / 67 64 / 94 112 / 154 225 / 283 Fan type Mixed Flow Mixed Flow Mixed Flow Mixed Flow ontrols Basic Basic Basic Basic Mounting In-Line In-Line In-Line In-Line Sound Pressure db(a)@3m 24 / 29 23 / 28 26 / 33 31 / 36 Power watts 24 / 26 25 / 3 45 / 52 78 / 36 Amps.1 /.11.11 /.13.2 /.23.35 /.49 Building Regulations AF Yes Yes Yes Yes uct diameter (mm) 1 125 15 2 Voltage 23v / 1ph / 5Hz 23v / 1ph / 5Hz 23v / 1ph / 5Hz 23v / 1ph / 5Hz Rating IPX4 IPX4 IPX4 IPX4 Material finish Polymer oated Steel Polymer oated Steel Polymer oated Steel Polymer oated Steel Weight (kg) 4.6 4.6 6.1 8 imensions (H x W x ) mm 237 x 55 x 215 237 x 474 x 215 26 x 58 x 247 295 x 55 x 293 Part No. 9358 9359 936 9361 Performance Aventa Silent 1 Aventa Silent 125 Aventa Silent 15 Aventa Silent 2 15 25 4 125 35 2 3 1 25 15 75 2 5 1 15 1 25 5 5 l/sec 2 4 6 8 2 4 6 8 1 3 6 9 12 15 18 5 1 15 2 25 3 l 3 m /hr 5 1 15 2 25 5 1 15 2 25 3 35 1 2 3 4 5 6 2 4 6 8 1 m imensions (mm) Model B E Figure no AVS1 98 215 243 55 237 1 AVS125 123 215 243 474 237 1 AVS15 147 247 274 58 26 1 AVS2 198 293 386 55 295 2 E B E ontrols and Accessories Fig.1 Fig.2 A range of accessories including flexible and rigid ducting kits, controls and grilles are available. 6 Airflow airflow.com ustomer Services 1494 568 7 airflow.com
Aventa Turbo omestic and light commercial facilities Aventa Turbo Highly reliable and powerful fan in a modular design for ease of installation and maintenance. The Aventa Turbo series are designed to provide ventilation levels that comply with the latest Building Regulations. Works particularly well against higher system pressure. Operated by basic switching (switch not supplied), these fans can be installed in loft spaces or service shafts for remote extraction with minimal room noise. Key Features In-Line centrifugal fan Flow rates up to 1325 m 3 /hr esigned for ventilation of medium and large size facilities Horizontal or vertical mounting Supply or extract air High strength plastic body Higher pressure capability for longer ducts External rotor motor with ball-bearings with thermal protection omplete with mounting bracket Balanced impeller IPX4 rating omplies with Building Regulations 3 year warranty The extensive range of Aventa Turbo fans provide compact, quiet and powerful remote mounted ventilation for ducted installations. Fans can be mounted vertically, horizontally or at an inclined angle for versatility of installation. STATI PRESSURE (Pa) Model Basic ontrol by basic switching (switch not included) Technical ata Specification Aventa Turbo 1B Aventa Turbo 125B Aventa Turbo 15B Aventa Turbo 2B Aventa Turbo 25B Aventa Turbo 315B Air flow m 3 /hr / l/sec 25 / 69 365 / 11 495 / 137 79 / 219 115 / 319 1325 / 368 Fan type entrifugal entrifugal entrifugal entrifugal entrifugal entrifugal ontrols Basic Basic Basic Basic Basic Basic Mounting In-Line In-Line In-Line In-Line In-Line In-Line Sound Pressure db(a)@3m 47 47 46 49 5 5 Power watts 59 61 64 11 17 155 Amps.26.27.28.48.74.67 Building Regulations AF Yes Yes Yes Yes Yes Yes uct diameter (mm) 1 125 15 2 25 315 Voltage 23v / 1ph / 5Hz 23v / 1ph / 5Hz 23v / 1ph / 5Hz 23v / 1ph / 5Hz 23v / 1ph / 5Hz 23v / 1ph / 5Hz Rating IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 Material finish Plastic Plastic Plastic Plastic Plastic Plastic Weight (kg) 2.15 2.2 2.6 4 4.5 5.1 imensions (H x W x ) mm 25 x 27 x 23 25 x 27 x 22 3 x 31 x 286 34 x 354 x 276 34 x 354 x 265 4 x 414 x 276 Part No. 94136 941361 941362 941363 941364 941365 Performance Aventa Turbo1 Aventa Turbo125 Aventa Turbo15 Aventa Turbo 2 Aventa Turbo 25 Aventa Turbo 315 4 35 35 4 6 6 3 3 35 5 5 3 3 25 25 4 4 25 2 2 3 3 2 2 15 15 2 2 15 1 1 1 1 1 1 5 5 5 5 5 l/sec 2 4 6 8 2 4 6 8 1 25 5 75 1 125 15 5 1 15 2 25 3 5 1 15 2 25 3 35 5 1 15 2 25 3 35 4 3 m /hr 1 5 15 2 25 5 1 15 2 25 3 35 1 2 3 4 5 2 4 6 8 1 2 4 6 8 1 12 2 4 6 8 1 12 14 imensions (mm) ØB F E Model A B E F G H imensions AVT 1B 1 25 27 23 3 27 3 6 25x27x23 AVT 125B 125 25 27 22 3 27 3 6 25x27x23 AVT 15B 15 3 31 286 3 3 3 6 3x31x286 AVT 2B 2 34 354 276 3 3 4 6 34x354x276 AVT 25B 25 34 354 265 3 3 4 6 34x354x265 AVT 315B 315 4 414 276 4 55 4 6 4x414x276 ØB ontrols and Accessories ØH A range of accessories including flexible and rigid ducting kits, controls and grilles are available. G 8 Airflow airflow.com ustomer Services 1494 568 9 airflow.com
Air Flow Solutions Always Innovating Our constant search for new and better ways to save energy, improve the indoor environment and provide you with high quality, reliable and easy to use products that contribute to a low carbon future continues. visit: airflow.com for the latest, products, data sheets, application advice and information I/S f B (57) ustomer Services : 1494 568 Technical Support : 1494 5695 Airflowevelopments1 Airflow all: 1494 568 Visit: airflow.com Airflow evelopments Limited Aidelle House, Lancaster Road, ressex Business Park, High Wycombe, Buckinghamshire, E-mail: info@airflow.com Telephone: +44 () 1494 525252 Facsimile: +44 () 1494 46173 United Kingdom, HP12 3QP airflow.com Airflow evelopments Limited. Airflow evelopments Limited reserve the right, in the interests of continuous development, to alter specifications without prior notice. All orders are accepted subject to our conditions of sale which are available on request 8191 - Issue1 3/14