SANDVIK LH517i intelligent LOADER TECHNICAL SPECIFICATION Sandvik LH517i is a high capacity Load-Haul-Dump (LHD) for use in 5 x 5 meter mining tunnels. This intelligent loader features many improvements in operator and maintenance ergonomics. The already high level of safety has been further increased to make the operation and maintenance more fluent. Higher productivity and profitability is achieved by better balanced machine and larger bucket size. Rebalancing makes the bucket filling easier and reduces tire wear. Combined with unique bucket filling, the Sandvik LH517i can boost operations to the next level. Sandvik LH517i has integrated intelligence in the form of Sandvik Intelligent Control system, My Sandvik Digital Services Knowledge Box on-board hardware and automation readiness. Additional examples of available options are Integrated weighing system and AutoMine Loading Onboard Package. CAPACITIES Tramming capacity 17 200 kg Break out force, lift 35 000 kg Break out force, tilt 29 450 kg bucket 7.0 m 3 SPEEDS FORWARD & REVERSE WITH VOLVO TAD1342 VE (LEVEL/LOADED, WITH LOCK-UP) 1st gear 2nd gear 3rd gear 4th gear 5.3 km/h 9.5 km/h 16.5 km/h 29.3 km/h BUCKET MOTION TIMES Raising time Lowering time Dumping time 8.3 sec 4.3 sec 2.0 sec OPERATING WEIGHTS * Total operating weight Front axle Rear axle 46 000 kg 19 700 kg 26 300 kg LOADED WEIGHTS * Total loaded weight Front axle Rear axle 63 200 kg 47 000 kg 16 200 kg * Unit weight is dependent on the selected options
OPERATIONAL CONDITIONS AND LIMITS Environmental temperature operating altitude REQUIREMENTS AND COMPLIANCE From -10 C to +50 C With engine Volvo TAD1342VE from -1500 m to +3000 m at 25 C without rated power derate Compliance with 2006/95/EC Low voltage directive Compliance with 2004/108/EC Electromagnetic compatibility directive Compliance with 2006/42/EC Machinery directive (Equipment for EU area, achieved with relevant options) Design based on EN 1889-1. Machines for underground mines. Mobile machines working underground. Safety. Part 1: Rubber tyred vehicles. Design based on MDG 15. Guideline for mobile and transportable equipment for use in mines. (Equipment for Australia, achieved with relevant options) Electrical system based on IEC 60204-1. Safety of machinery Electrical equipment of machines Part 1: General requirements CONTAINS FLUORINATED GREENHOUSE GASES Refrigerant R134a under pressure max 38 bar/550 PSI: Filled weight: 1.600 kg CO2e: 2.288 tons GWP: 1430 Information based on the F Gas Regulation (EU) No 517/2016 AXLES Front axle, spring applied hydraulic operated brakes. Fixed Rear axle, spring applied hydraulic operated brakes. Oscillating ± 8 TIRES Tire size (Tires are application approved. Brand and type subject to availability.) HYDRAULICS Filling pump for hydraulic oil Door interlock for brakes, boom, bucket, and steering hydraulics Oil cooler for hydraulic and transmission oil Fittings Hoses Hydraulic oil tank capacity Sight glass for oil level Kessler D106, limited slip differential Kessler D106, limited slip differential 29.5x29 L5S 34 ply Electrical Capability up to 50 C ambient temperature ORFS MSHA approved 333 l 2 pcs POWER TRAIN ENGINE Diesel engine Output Torque Number of cylinders In-line 6 Displacement Cooling system Combustion principle Air filtration Electric system Emissions Ventilation rate (Ultra low sulphur diesel) Particulate index (Ultra low sulphur diesel) Exhaust system Average fuel consumption at 50% load Fuel tank capacity CONVERTER Dana SOH 9000 series with lock-up TRANSMISSION Power shift transmission with modulation Volvo TAD1342VE Without engine brake 310 kw @ 2 100 rpm 2 005 Nm @ 1 260 rpm 12.78 l Liquid cooled and piston pump driven cooler fan 4-stroke, direct injection, turbo with intercooler Two stage filtration, dry type 24 V Tier 2, Euro Stage II CANMET 11.66 m3/s, MSHA 16500 CFM MSHA 10000 CFM Catalytic purifier and muffler, double wall exhaust pipe 35.0 l/h 595 l Dana SOH 6000 series, automatic gear shift control, four gears forward and reverse STEERING HYDRAULICS Full hydraulic, centre-point articulation, power steering with two double acting cylinders. Steering lock. Steering main valve Steering hydraulic cylinders Steering pump Steering and servo hydraulic pumps BUCKET HYDRAULICS The oil flow from steering hydraulic pump is directed to bucket hydraulics when steering is not used. Boom system Lift cylinders Dump cylinder Main valve Pump for bucket hydraulics BRAKES Steering controlled by electric joystick Open circuit type 125 mm, 2 pcs Piston type, LS controlled Piston type Service brakes are spring applied; hydraulically operated multidisc wet brakes on all wheels. Two independent circuits: one for the front and one for the rear axle. Service brakes also function as an emergency and parking brake. Brake system performance complies with requirements of EN ISO 3450, AS2958.1 and SABS 1589 Automatic brake activation system, ABA Electrically driven emergency brake release pump Brake oil tank capacity Joystick bucket and boom control (electric), equipped with piston pump that delivers oil to the bucket hydraulic main valve. Z-link 180 mm, 2 pcs 220 mm, 1 pc Open circuit type Piston type, LS controlled 77 l 2 / 8
OPERATOR'S COMPARTMENT The Sandvik LH517i cabin offers superior operator ergonomics through increased leg space and improved pedal position to reduce operator fatigue. With a slim line dash and greater headroom, the cabin is spacious for the operator s comfort, providing also additional storage for a water bottle and supplies needed for a full shift. The Sandvik LH517i cabin uses dust and noise resistant upholstery materials, is ROPS/FOPS certified to protect the operator in case of roll over or falling objects, has 3-layer laminated safety glass windows, emergency exits, illuminated cabin entrance with threepoint contact handles and anti-slip steps. In addition, the cabin is mounted on oil dampened bushings to reduce whole body vibration. CABIN ROPS certification according to EN ISO 3471 FOPS certification according to EN ISO 3449 Sealed, air conditioned, over pressurized, noise suppressed closed cabin Sound absorbent material to reduce noise Laminated glass windows Cabin mounted on rubber mounts to the frame to reduce vibrations Air conditioning unit located inside the cabin Powered pre-filter for A/C device Adjustable joysticks No high pressure hoses in the operator s compartment Inclinometers to indicate operating angle Emergency exit Floor washable with water to reduce dust Three-point contact access system with replaceable and colour coded handles and steps 12 V output Remote circuit breaker switch OPERATOR S SEAT The Sandvik LH517i cabin is fitted with an adjustable low frequency suspension seat with two-point seat belt or optional high back seat with four-point seat belt. New softer padded arm rests and adjustable joysticks can be configured either on the cabin wall or fixed to the seat. Low frequency suspension Height adjustment Adjustment according to the operator s weight Fore-aft isolation Padded and adjustable arm rests Adjustable lumbar support Selectable damping Two-point seat belt CONTROL SYSTEM, DASHBOARD AND DISPLAYS A new 7 colour display with advanced touch screen functionality has all the needed information and alarms on one large display giving the operator more time to keep eyes on the road. New dark background graphics with clear symbols are designed for the underground mining environment to reduce eye fatigue, while red interior cabin lighting is also designed to not affect night vision during driving. Sandvik Intelligent Control System Critical warnings and alarms Instrument Panel Instrument Panel My Sandvik Digital Services Knowledge Box on-board hardware AutoMine Loading readiness Displayed as text and with light 7" Color display with touch screen function and adjustable contrast and brightness Illuminated switches FRAME REAR AND FRONT FRAME A new heavy duty rear frame with added weight in the rear of the loader balances the machine perfectly when lifting and pushing into the muck pile. Heavy duty rear frame and mask with integrated reaction bars minimizes damage from wall impacts. High strength structure with optimized material thicknesses and reduced own weight ontribute to higher overall hauling capacity and long structural lifetime. Welded steel box structures used in the frame and boom provide strong resistance to shock loads and are optimized to reduce stresses and extend frame lifetime. Central hinge Tanks Automatic central lubrication Adjustable upper bearing Welded to the frame 3 / 8
ELECTRICAL EQUIPMENT OPTIONS MAIN COMPONENTS Alternator Batteries Starter Driving lights Working lights Parking, brake and indicator (blinkers) lights Control system Dual horn configuration with separate alarms for start and reverse Flashing beacon INCLUDED SAFETY FEATURES FIRE SAFETY Portable fire extinguisher Hot side - cold side design Isolation of combustibles and ignition sources Heat insulation on exhaust manifold, turbo, and isolated exhaust pipe 28 V, 150 A 2 x 12 V, 180 Ah 7 kw, 24 V LED lights: 4 pcs in front, rear and cabin LED lights: 1 pc under boom 2 pcs corner light LED lights: 2 pcs in front and rear 5 modules, inbuilt system diagnostics 12 kg (CEN) SAFETY OPTIONS Cabin lift kit (150 mm) Disabled 4th gear Radio remote control HBC CAN Retrieval hook (hydraulic brake release by pulling the hook) Proximity Detection Interface Driving direction lights (red / green) Eclipse Fire suppression system with auto shutdown, Sustain or Extreme agent delivered separately Safety rails Emergency steering (CEN) Neutral brake Tire pressure monitoring system AutoMine Loading: Onboard Package ALTERNATIVE ENGINES Tier 4 Final (USA and Canada) Volvo TAD1372VE, 315 kw, 1900 rpm. Requires ultra low sulphur fuel and AdBlue. CANMET vent. rating 14,000 CFM, MSHA vent. rating 13,500 CFM. Equipped with an engine brake. Euro Stage IV Volvo TAD1372VE, 315 kw, 1900 rpm. Requires ultra low sulphur fuel and AdBlue. Equipped with an engine brake. ELECTRICAL OPTIONS Jump start interface Monitoring camera system ENERGY ISOLATION Lockable main switch, ground level access Starter isolator Emergency stop push buttons according to EN ISO 13850 Pressure release in the expansion tank cap Automatic discharge for pressure accumulators (brake system and pilot circuit) Frame articulation locking device Mechanical boom locking device Wheel chocks and brackets DOCUMENTATION STANDARD MANUALS Operator s Manual Maintenance Manual Parts Manual Service and Repair Manual ToolMan Decals English and other EU languages English and other EU languages English 1 pc in cabin 2 pcs in rear English, Russian 2 x USB stick in pdf format, includes all manuals English, Finnish, Swedish, Spanish, Russian, French, Polish, Portuguese, Turkish, German, Norwegian, Estonian, Chinese, Greek OTHER OPTIONS Additional cabin heater element for air conditioning Cover grills for lamps Spare rim 25.00-29/3.5 (for tyres 29.5R29) Boom suspension (ride control) Wiggins quick filling set for fuel, coolant and oils (hydraulic, engine and transmission) Integrated weighing system Accordance with CE requirements Arctic package (120V) Includes cabin heater for new AC unit, hydraulic oil heater, transmission heater, engine heaters and arctic oils Arctic package (230V) Includes cabin heater for new AC unit, hydraulic oil heater, transmission heater, engine heaters and arctic oils ToolMan CD 4 / 8
GRADE PERFORMANCE Volvo TAD1342VE, EU Stage II, Tier 2 (3 % rolling resistance, with lock-up) Empty Percent grade 0.0 10. 0 14.3 20.0 Ratio 1:10 1:7 1:5 1st gear (km/h) 5,3 5,2 5,2 5,1 2nd gear (km(h) 9,5 9,2 9,0 7,4 3rd gear (km/h) 16,6 12,9 4th gear (km/h) 29,6 Loaded Percent grade 0.0 10. 0 14.3 20.0 Ratio 1:10 1:7 1:5 1st gear (km/h) 5,3 5,2 5,1 5,0 2nd gear (km(h) 9,5 8,8 7,2 3rd gear (km/h) 16,5 4th gear (km/h) 29,3 GRADE PERFORMANCE Volvo TAD1372VE, EU Stage IV, Tier 4f (3 % rolling resistance, with lock-up) Empty Percent grade 0.0 10. 0 14.3 20.0 Ratio 1:10 1:7 1:5 1st gear (km/h) 4,9 4,8 4,7 4,7 2nd gear (km(h) 8,7 8,4 8,3 7,5 3rd gear (km/h) 15,2 13,1 7,7 4th gear (km/h) 27,0 Loaded Percent grade 0.0 10. 0 14.3 20.0 Ratio 1:10 1:7 1:5 1st gear (km/h) 4,8 4,7 4,7 4,6 2nd gear (km(h) 8,6 8,3 7,3 3rd gear (km/h) 15,1 4th gear (km/h) 26,7 5 / 8
DIMENSIONS 6 / 8
DIMENSIONS Bucket alternatives (m³) 7 m³ 7.6 m³ 8.6 m³ 7.6 m³ 8.4 m³ Material broken density (kg/m3) (FF 0,9) max. 2400 kg/m³ max. 2100 kg/m³ max. 1800 kg/m³ max. 2200 kg/m³ max. 2000 kg/m³ Lip plate type GET GET GET Bare Lip Bare Lip L1 (mm) 11496 11653 11796 11686 11796 L2 (mm) 11114 11225 11327 11216 11327 L3 (mm) 10761 10884 10997 10940 10997 L4 (mm) 3705 3816 3918 3807 3918 L5 (mm) 1885 1885 1885 1885 1885 L6 (mm) 1885 1885 1885 1885 1885 L7 (mm) 3639 3639 3639 3639 3639 L8 (mm) 2735 2857 2970 2913 2970 L9 (mm) 3475 3632 3776 3666 3776 L10 (mm) 2758 2966 3052 2949 3052 H1, CC517i (mm) 2760 2760 2760 2760 2760 H1, CC517i HIGH (mm) 2910 2910 2910 2910 2910 H2 (mm) 2215 2215 2215 2215 2215 H3 (mm) 615 615 615 615 615 H4 (mm) 505 505 505 505 505 H5 (mm) 950 950 950 950 950 H6 (mm) 1309 1406 1495 1390 1495 H7 (mm) 1769 1879 1980 1936 1980 H8 (mm) 2886 2789 2700 2805 2700 H9 (mm) 4235 4236 4236 4282 4236 H10 (mm) 4631 4631 4631 4631 4631 H11 (mm) 6242 6367 6482 6422 6482 W1 (mm) 3204 3066 3105 3000 3000 W2 (mm) 3156 3066 3066 3066 3000 W3 (mm) 2570 2570 2570 2570 2570 W4 (mm) 2797 2797 2797 2797 2797 A1 13 13 13 13 13 A2 42.5 42.5 42.5 42.5 42.5 R1, Left Turn (mm) 3448 3448 3448 3448 3448 R2, Left Turn (mm) 7319 7375 7429 7318 7374 T, Left Turn 4881 4936 4990 4879 4935 R1, Right Turn (mm) 3557 3557 3606 3557 3557 R2, Right Turn (mm) 7319 7982 7444 7320 7368 T, Right Turn (mm) 4809 4866 4894 4804 4852 7 / 8
Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik representative for clarification on specifications and options. Sandvik Mining and Rock Technology 2018 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries 8 / 8