HEVA Rollers Swing & KingRoller Our widest ever range 10.2 20.3 m covers every need ROLLS
HEVA KING ROLLER 12.3 m, 15.3 m, 16.3 m, 18.3 m & 20.3 m Now even wider to cover more ground even faster! Supreme contour following ensures consistent, high quality results across the field With working widths of 12.3 m, 15.3 m, 16.3 m, 18.3 m or 20.3 m the new HEVA KingRoller meets the increasing demand for wider and heavier rolls. IMPRESSIVE EFFICIENCY A 20.3 m KingRoller, travelling at 8km/hr. with a driver driving at 90% field efficiency, will cover: 14.6 ha per hour
Free floating centresuspended roller sections ( ) All five roller sections on HEVA KingRoller are centre suspended ( ) and with independent flotation resulting in a perfect contour following of the KingRoller. Unique SATSystem KingRoller s hydraulic folding system is linked to two accumulators and a pressure gauge. The pressure gauge allows the operator to set the weight transfer level to ensure even consolidation across the full width. The KingRoller s main frame is supported by the two wing sections (O) cf photo. By this SATSystem the necessary part of the roll s weight is transferred to the centre and the outside wing sections. () cf photo. HEVA KingRoller is available with 7 different ring types, including the big 24 /620 mm Cambridge rings (20.3 m KingRoller: only 4 ring types). The rings are mounted on mm special steel axles suspended in double sealed mm large flange ball bearings. KingRollers are mounted with support bearings on all sections (however not on the outer sections of the 12.3 m model). The design of HEVA KingRoller can withstand higher working loads and HEVA KingRollers are also heavier than most of the other similar rolls, ensuring a perfect consolidation. Smart 200 overcentrefolding via HEVAs unique and simple chain wheels and cylinders. From 12.3 m to 20.3 m 200 overcentre folding
BUILTIN ADVANTAGES HEVA KINGROLLER 1 AUTO. LOCKING SYSTEM 2 HYDR. SUPPORTING LEG 3 LIGHTS 200 OVERCENTRE 4 SMART FOLDNING Radial TYRE 5 5/45R22.5 ON 16.3/18.3/20.3 M 6 SUP. BEARINGS ON ALL SECTIONS ( WING SECTIONS ON 12.3 m) Folding sequence 5 section KingRoller 1 Open the transport locks The wheel frame cylinder is engaged automatically the wheels are turned forward and lifted up 3 2 Rolls in transport position, wheels down The HEVA rolls are ready to work and the SATSystem can be adjusted (2. outlet) 5 6 4 wing sections out outside wing sections out (2. outlet) ROLLS
HEVA SWING ROLLER 10.2 m & 12.2 m HEVAs 5 section SwingRoller has with the centresuspended roller sections free floatation on each section ensuring supreme contour following even the centre section floats independently. Centre suspended roller sections 5 section hinge The folding mechanism has a deep wing link pivot with Teflon coated steel bushing top and bottom to provide the necessary strength. UNIQUE SATSYSTEM Spring Active Transfer Although designed to cope with the higher working loads of larger farms, the SwingRoller is still easy to handle and simple to fold whilst being capable of covering many hectares in a day. Via the SATSystem on HEVA SwingRollers a uniform weight on all sections is ensured. The rings are mounted on mm axles with double sealed mm large flange ball bearings, mounted with 4 bolts. Hereby an even consolidation is obtained across the full width of the rolls. Det clever design of all HEVA rolls also ensures that tractor drawbar height variation (4000 mm) does not have any influence on the soil pressure of the individual roller sections. Folding sequence 5 section SwingRoller The wheel frame 5 cylinder is engaged automatically the wheels are turned forward and lifted up 3 1 Open the transport locks 2 Rolls in transport position, wheels down The HEVA rolls are ready to work 4 wing sections out 6 outside wing sections out (2. outlet)
TECHNICAL SPECIFICATIONS CAMBRIDGE WORKING WIDTH Ring Size 450 mm 510 mm CROSSKILL 620 mm 2D CORRUGATED 485530 mm / 5500 mm PLAIN 500 mm / 0 mm 505 mm 12.2 m Transport widht 2.7 m 5,690 199 6,010 199 5,9 / 105 5,500 / 125 5,020 35 6,310 235 6,680 235 6,650 / 125 6,130 / 150 5,450 40 WHEELS 400 / x 15.5 14 ply 12.3 m 15.3 m 8,100 236 9,830 236 8,050 / 9,500 125 7,530 / 8,630 150 7,040 42 9,730 292 11,490 292 9,240 / 11,170 153 9,050 / 10,000 187 8,200 51 10,400 306 12,240 306 9,800 / 11,890 163 9,5 / 10,0 199 8,720 55 11,3 346 13,900 346 11,290 / 13,400 183 10,590 / 12,230 223 9,780 61 13,410 / 248 12,610 68 TEL: +44 ( 0) 1472 240869 KINGROLLER WHEELS 500 / 50 x 17 18 ply 16.3 m 18.3 m WHEELS 5 / 45 R 22.5 153E 20.3 m 14,280 386 14,170 / 203 EXTRA EQUIPMENT: 1 HYDR. BRAKES OR AIR BRAKES 2 MULTISEEDER FOR KINGROLLER YOUR LOCAL HEVA DEALER N. A. Christensensvej 34 DK7900 Nykøbing Mors Tel: +45 9772 4288 Fax: +45 9772 2112 Email: info@heva.com Web: www.heva.com Due to our company policy of continual improvement we reserve the right to change specifications and/or prices without prior notification. 9 8 1 1 0 0 4 1. D E SI GN E D AN D P R O DU CE D B Y MA R K SM AN INTERNATIONAL 9 DUDLEY ST, GRIMSBY, ENGLAND DN31 2AW. 10.2 m 2.7 m P RINT E D IN D E N M A RK: w w w. mf. dk TIPROLLER SWINGROLLER