GWC Valve International

GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE API 6D THROUGH CONDUIT SLAB & PARALLEL 21 EXPANDING GATE VALVES Pressure Class: 150 2,500 Size Range: 2 48 CATAL OG NU MB ER PG V- 10 0 1

G W C V A L V E I N T E R N A T I O N A L 2

TABLE w w w OF. CONTENTS g w c v a l v e. c o m Through Conduit Slab Gate Valve... 4 Through Conduit Parallel Expanding Gate Valve... 5 Through Conduit Slab Gate Valve Standard Features... 6 Through Conduit Parallel Expanding Gate Valve Standard Features... 10 Ordering Guide... 17 Slab Gate Valves Class 150... 18 Class 300... 19 Class 600... 19 Class 900... 19 Parallel Expanding Gate Valves Class 300... 20 Class 600... 21 Class 900... 21 Class 1500... 22 Class 2500... 22 Flow Coefficients (Cv) Value... 23 Terms and Conditions of Sale... 24 Return Goods Policy, Warranty... 25 3

G W C V A L V E I N T E R N A T I O N A L API 6D THROUGH CONDUIT SLAB GATE VALVE MAIN FEATURES Slab Gate Valve n Full bore for pigging / reduced pressure drop n Bi-directional n Pressure / spring / energized O-ring assisted seats for high / low pressure sealing n Seat sealing faces are not in the flow path n Single piston effect seats for internal cavity pressure relief n Double block and bleed capabilities n Sealant injectors for seats / stem Commonly Used Applications n Oil and gas industry n Power and mining industry n Offshore / Onshore applications n Sub-sea applications n Double block and bleed applications n Scrapers / Pig Traps / Pig Launchers and Receivers n Upstream gas compressor isolation n Critical and primary isolation 4

w w w. g w c v a l v e. c o m API 6D THROUGH CONDUIT PARALLEL EXPANDING GATE VALVE MAIN FEATURES Parallel Expanding Gate Valve n Full bore for pigging / reduced pressure drop n Bi-directional n Mechanically assisted expanding gate for positive high / low pressure sealing n Seat sealing faces are not in the flow path n Optional internal / external by-pass system for internal cavity pressure relief n Double block and bleed capabilities n Sealant injectors for seats / stem Commonly Used Applications n Oil and gas industry n Power and mining industry n Offshore / Onshore applications n Sub-sea applications n Double block and bleed applications n Scrapers / Pig Traps / Pig Launchers and Receivers n Upstream gas compressor isolation n Critical and primary isolation 5

G W C V A L V E I N T E R N A T I O N A L API 6D THROUGH CONDUIT SLAB GATE VALVE Slab Gate Valve Design Stem Bonnet stud and nut Floating seat with energized O-ring provides constant contact with gate Bonnet Gate Body Full-bore, through-conduit design reduces turbulence and pressure drop 6

w w w. g w c v a l v e. c o m API 6D THROUGH CONDUIT SLAB GATE VALVE Standard Features and Benefits 1. Seats / Fire-Safe Design (See Figure A) Depending upon the service of the valve, the seats can be supplied with soft seat inserts / hard face deposited metal seats. The line pressure / springs / energized O-rings, assists the single piston effect designed seats for high / low pressure sealing against the slab gate face, ensuring that a tight seal is formed. The soft seats and the seat pockets have been designed to be fire-safe. During a fire, the soft seats can be destroyed. As the seats are being slowly burnt, the upstream pressure forces the slab gate against the downstream seat. The downstream seat is thereby forced against the back of the seat pocket. The downstream seat is now forming a metal-to-metal seal with the back of the seat pocket face. When the soft seats have been fully burnt, the metal face of the seat now forms a metal-to-metal seal with the slab gate. Metal seated seats are firesafe by design. 2: Double Block and Bleed (See Figure A) The double block feature is the result of the two seats sealing against the slab gate, with the valve in the fully closed position, whether the line is under pressure or not. When there is no pressure on either side of the seats, the springs / energized O-rings force the seats to form a tight seal on the upstream / downstream sides of the slab gate. When there is pressure in the line, the upstream pressure forces the slab gate against the downstream seat, whilst also forcing the upstream seat against the slab gate, due to the single piston effect design of the seats. This has now formed a tight seal or double block on both sides of the slab gate. With the slab gate now tightly sealed on both sides, the vent / drain plug in the body can be released which will bleed the body cavity of pressure. This feature allows the draining of the cavity to remove debris / take a sample of the medium / test the sealing integrity of the seats. 3: Automatic Cavity Relief (See Figure B) Should the pressure in the body cavity exceed the line pressure, due to thermal expansion caused by an internal / external heat source, the greater cavity pressure will push the seat off the slab gate face allowing the excess cavity pressure to be vented into the line. This feature ensures that there is pressure equilibrium between the line and body cavity, which prevents the body material becoming overstressed. 4: Seat Sealant Injection (See Figure C & D) Due to possible damage of the seats by debris in the line / stem O-ring failure due to a prolonged service, there can be leakage from these areas. To extend the service life of the valve until the valve can be removed from the line for repair, a sealant can be injected through the seat / stem injection fittings. Figure A Figure B Figure C Figure D 7

G W C V A L V E I N T E R N A T I O N A L MODEL 81 THROUGH CONDUIT SLAB GATE VALVE 8 Section A-A Detail B

w w w. g w c v a l v e. c o m STANDARD PARTS AND MATERIALS Item Description Carbon Steel -20 F to 250 F [-29 C to 121 C] Carbon Steel Low Temperature -50 F to 250 F [-46 C to 121 C] 1 Body A216 WCB/WCC A352 LCB/LCC 2 Bonnet A216 WCB/WCC A352 LCB/LCC 3 Slab Gate A515 Gr.70 or A105N/ENP A350 LF2/ENP 4 Seat Ring A105N/ENP A350 LF2/ENP 5 Seat Insert RPTFE RPTFE 6 Stem A182 F6A A182 F6A 7 Yoke A216 WCB/WCC A352 LCB/LCC 8 Stem Cover ANSI 1020 ANSI 1020 9 Indication Rod SS304 SS304 10 Drain & Vent SS304 SS304 11 Stem Sealant Fitting SS304 SS304 12 Seat Sealant Fitting SS304 SS304 13 Upper V-Type Packing Braided Graphite Braided Graphite 14 Lantern Ring A182 F6A A182 F6A 15 Lower V-Type Packing Braided Graphite Braided Graphite 16 Bonnet Gasket SS304 + Graphite SS304 + Graphite 17 Bonnet Stud A193 B7M A320 L7M 18 Bonnet Nut A194 2HM A194 7M 19 Yoke Stud A193 B7M A320 L7M 20 Yoke Nut A194 2HM A194 7M 21 Indication Rod Nut SS304 SS304 22 Seat O-Ring HNBR PTFE 23 Indication O-Ring HNBR PTFE 24 Gear Operator Cast Iron Cast Iron 25 Gear Operator Bolt A193 B7M A320 L7M 26 Stem Nut AL-Bronze AL-Bronze 27 Bearing Housing A216 WCB/WCC A352 LCB/LCC 28 Thrust Bearing AISI 1070 AISI 1070 29 Hand Wheel Nut AISI 1020 AISI 1020 30 Stem Nut O-Ring HNBR PTFE 31 Hand Wheel Ductile Iron Ductile Iron *We reserve the right to make changes to materials and specifications 9

G W C V A L V E I N T E R N A T I O N A L API 6D THROUGH CONDUIT PARALLEL EXPANDING GATE VALVE Parallel Expanding Gate Valve Design Stem Bonnet stud and nut Body Bonnet Parallel Expanding Gate Gate centralizer provides positive control for improved operation Full-bore, throughconduit design reduces turbulence and pressure drop 10

w w w. g w c v a l v e. c o m Standard Features and Benefits 1: Seats/Fire-Safe Design (See Figure A) Depending upon the service of the valve, the seats can be supplied with soft seat inserts / hard face deposited metal seats. As the sealing action of the valve is mechanically activated, line pressure is not required to force the seats against the expanding gate. Therefore, the seats are of a very basic, but rugged design. The soft seats and the seat pockets have been designed to be fire-safe. API 6D THROUGH CONDUIT PARALLEL EXPANDING GATE VALVE The sealing action of the fire-safe design is the same as that of the slab gate valve. Metal seated seats are fire-safe by design. Figure A 2. Double Block and Bleed (See Figure A) The double block feature is the result of the two seats sealing against the expanding gate, with the valve in the fully closed position, whether the line is under pressure or not. When there is no pressure on either side of the seats, the springs / energized O-rings force the seats to form a tight seal on the upstream / downstream sides of the expanding gate. When there is pressure in the line, the upstream pressure forces the expanding gate against the downstream seat, whilst also forcing the upstream seat against the expanding gate, due to the single piston effect design of the seats. This has now formed a tight seal or double block on both sides of the expanding gate. With the expanding gate now tightly sealed on both sides, the vent / drain plug in the body can be released which will bleed the body cavity of pressure. This feature allows the draining of the cavity to remove debris / take a sample of the medium / test the sealing integrity of the seats. Figure C Figure- C 3. Sealant Injection (See Figure C & D) Due to possible damage of the seats by debris in the line / stem O-ring failure due to a prolonged service, there can be leakage from these areas. To extend the service life of the valve until the valve can be removed from the line for repair, a sealant can be injected through the seat / stem injection fittings. Figure D 11

G W C V A L V E I N T E R N A T I O N A L MODEL 82 THROUGH CONDUIT PARALLEL EXPANDING GATE VALVE Section A-A Centralizer Detail B 12

w w w. g w c v a l v e. c o m STANDARD PARTS AND MATERIALS Item Description Carbon Steel -20 F to 250 F [-29 C to 121 C] Carbon Steel High Temperature -20 F to 650 F [-29 C to 343 C] Carbon Steel Low Temperature -50 F to 250 F [-46 C to 121 C] 1 Body A216 WCB/WCC A216 WCB/WCC A352 LCB/LCC 2 Bonnet A216 WCB/WCC A216 WCB/WCC A352 LCB/LCC 3 Expanding Gate A216 WCB/WCC/ ENP A216 WCB/WCC + HF-6 Hard Faced A352 LCB/LCC/ENP 4 Seat Ring A105N/ENP A105N/ENP A350 LF2/ENP 5 Seat Insert/ Seal Surface RPTFE A105N + HF-6 Hard Faced RPTFE 6 Stem A182 F6A A182 F6A A182 F6A 7 Yoke A216 WCB/WCC A216 WCB/WCC A352 LCB/LCC 8 Stem Cover ANSI 1020 ANSI 1020 ANSI 1020 9 Indication Rod SS304 SS304 SS304 10 Drain & Vent SS304 SS304 SS304 11 Stem Sealant Fitting SS304 SS304 SS304 12 Seat Sealant Fitting SS304 SS304 SS304 13 Upper V-Type Packing Braided Graphite Braided Graphite Braided Graphite 14 Lantern Ring A182 F6A A182 F6A A182 F6A 15 Lower V-Type Packing Braided Graphite Braided Graphite Braided Graphite 16 Bonnet Gasket SS304 + Graphite SS304 + Graphite SS304 + Graphite 17 Bonnet Stud A193 B7M A193 B7M A320 L7M 18 Bonnet Nut A194 2HM A194 2HM A194 7M 19 Yoke Stud A193 B7M A193 B7M A320 L7M 20 Yoke Nut A194 2HM A194 2HM A194 7M 21 Indication Rod Nut SS304 SS304 SS304 22 Seat O-Ring HNBR Graphite PTFE 23 Indication Seal HNBR Graphite PTFE 24 Gear Operator Cast Iron Cast Iron Cast Iron 25 Gear Operator Bolt A193 B7M A193 B7M A320 L7M 26 Stem Nut AL-Bronze AL-Bronze AL-Bronze 27 Bearing Housing A216 WCB/WCC A216 WCB/WCC A352 LCB/LCC 28 Thrust Bearing AISI 1070 AISI 1070 AISI 1070 29 Hand Wheel Nut AISI 1020 AISI 1020 AISI 1020 30 Stem Nut O-Ring HNBR Graphite PTFE 31 Hand Wheel Ductile Iron Ductile Iron Ductile Iron 32 Centralizer ANSI 1020/ENP ANSI 1020/ENP A350 LF2/ENP 33 Centralizer Shaft SS410 SS410 SS410 * We reserve the right to make changes to materials and specifications 13

G W C V A L V E I N T E R N A T I O N A L API 6D THROUGH CONDUIT PARALLEL EXPANDING GATE VALVE Operation Principles Figure E Figure F Figure G Closed Position: Gate Assembly Fully Expanded (See Figure E) As the gate and segment assembly are approaching the closed position, the stopper on the segment has contacted with the lower body stop, which prevents the segment from travelling any further. As the hand wheel is turned further, the main gate is forced down and against the wedge angle of the segment. This action expands the gate and segment assembly against the seats to form a tight seal. Mid Travel Position: Gate Assembly Fully Retracted (See Figure F) As the hand wheel is turned to open the valve, the gate travels up and away from the wedge angle of the segment. This action retracts the gate and segment assembly sealing force from the seats, which allows the assembly to travel freely between the seats. From the fully open to the fully closed positions, a gate centralizing mechanism holds the gate and segment assembly in the fully retracted position, to ensure that the assembly does not wedge itself between the seats. Open Position: Gate Assembly Fully Expanded (See Figure G) As the gate and segment assembly are approaching the open position, the stopper on the segment has contacted with the upper body stop, which prevents the segment from travelling any further. As the hand wheel is turned further, the main gate is forced up and against the wedge angle of the segment. This action expands the gate and segment assembly against the seats to form a tight seal to isolate the flow from the body cavity. At this position, the bore holes of the gate and segment are aligned exactly with the valve bore. 14

w w w. g w c v a l v e. c o m API 6D THROUGH CONDUIT PARALLEL EXPANDING GATE VALVE Gate Centralizer Operation Principles Figure H Figure I The main purpose of the gate centralizer is to maintain the gate and segment assembly in the fully retracted position, during the travel from open to close, to prevent any wedging action between the assembly and the seats (See Figure H) However, the gate centralizer allows the gate and segment assembly to expand at the final moment. During the travel from open to close, the gate centralizer is maintained in a parallel position with the seats by the skirt plates, which are positioned either side of the seats (See Figure I) As the gate and segment assembly are nearing the fully open / closed positions, the skirt plates allow the gate centralizer to tilt, which allows the gate and segment assembly to expand. The skirt plates also assist in aligning the gate and segment assembly with the seats (See Figure J) Figure J 15

G W C V A L V E I N T E R N A T I O N A L API 6D THROUGH CONDUIT PARALLEL EXPANDING GATE VALVE Body Cavity Pressure Relief Figure K Figure L Due to the design of the expanding gate and seats to form a tight seal, any excess pressure build-up in the body cavity can t be self-relieved, as in the slab gate design. To relieve this body cavity pressure, 2 types of a pressure relief system can be provided on the outside of the valve body. The standard type consists of 2 needle valves, a check valve, tubing and fittings. This system relieves the body cavity pressure to the upstream side of the valve. During normal valve operation, the 2 needle valves must be kept open, so that the upstream line pressure can keep the check valve closed. When the body cavity pressure exceeds the upstream line pressure, the check valve is un-seated and the excess pressure is relieved upstream (See Figure K) The other type of pressure relief system is a safety pressure relief valve fitted on the outside of the valve body. A drilled and threaded hole connects the body cavity to the safety pressure relief valve. The safety pressure relief valve is set to relieve pressure at 1.33 times the line pressure, or as per the clients requirements (See Figure L) 16

w w w. g w c v a l v e. c o m ORDERING GUIDE Example: 8 Figure # 81150-A-G1-GO 81 15 0 A G1 GO 1. 2. 3. 4. 5. 6. 7. 8 API-6D THRU CONDUIT SLAB GATE VALVE, CLASS 150, RF-FLG, A216 WCB BODY x G1 TRIM, NACE, FIRESAFE, BEVEL GEAR OPERATOR. 1. MODEL 81 API-6D THRU CONDUIT SLAB GATE VALVE 82 API-6D THRU CONDUIT EXPANDING GATE VALVE 2. RATING 15 - CLASS 150 90 - CLASS 900 30 - CLASS 300 150 - CLASS 1500 60 - CLASS 600 250 - CLASS 2500 3. END CONNECTION 0 - RAISED FACE FLANGED 9 - RING TYPE JOINT FLANGED 7 - BUTT WELD X - OTHER 4. MATERIAL: BODY + BONNET A - A216 WCB B - A216 WCC C - A352 LCC D - A352 LCB 5. TRIM MATERIAL TRIM CODE BODY AND BONNET STEM GATE SEAT SEAT RING BOLTING TEMPERATAURE SERVICE G1 A216 WCB A182 F6A A105+ENP A216 WCB+ENP A515 GR.70+ENP RTFE** A105+ ENP NACE -20 F TO 250 F [-29 C TO 121 C] STANDARD G2 A216 WCC A182 F6A A105+ENP A216 WCC+ENP A515 Gr.70+ENP RTFE** A105+ ENP NACE -20 F TO 250 F [-29 C TO 121 C] STANDARD G3* A216 WCB A182 F6A A216 WCB+ ST-6-OVERLAY A105+ ST-6 OVERLAY A105+ ENP NACE -20 F TO 650 F [-29 C TO 343 C] HIGH TEMPERATURE G4* A216 WCC A182 F6A A216 WCB+ ST-6-OVERLAY A105+ ST-6 OVERLAY A105+ ENP NACE -20 F TO 650 F [-29 C TO 343 C] HIGH TEMPERATURE G5 A352 LCC A182 F6A A350 LF2+ENP RTFE** A350 LF2+ ENP NACE -50 F TO 250 F [-46 C TO 121 C] LOW TEMPERATURE G6 A352 LCB A182 F6A A350 LF2+ENP RTFE** A350 LF2+ ENP NACE -50 F TO 250 F [-46 C TO 121 C] LOW TEMPERATURE *G3, G4 - NOT APPLICABLE FOR MODEL 81 ST-6: STELLITE-6 ENP: ELECTROLESS NICKEL PLATING **SEAT: DEVLON FOR 16 CL.300 AND ABOVE; FOR 8 CL.600 AND ABOVE; FOR ALL SIZES OF CL.900 & CL.1500 6. OPERATOR HO - HANDWHEEL OPERATOR GO - BEVEL GEAR OPERATOR B - BARE STEM 7. SPECIAL REQUIREMENTS S - SUPPLY COMPLETE INFORMATION 17

G W C V A L V E I N T E R N A T I O N A L API 6D THROUGH CONDUIT SLAB GATE VALVE Model 81150/81300/81600/81900 Dimensions and Weights Hand Wheel and Bevel Gear Operated CLASS 150 Model 81150 DIMENSIONS Size RF RTJ BW B H HW (OPEN) W HG (OPEN) G WEIGHT inch mm in mm in mm in mm in mm in mm in mm in mm in mm in kg lbs 2" 178 7.00 191 7.50 216 8.50 49 1.94 145 5.7 470 18.5 260 10.2 - - - - 35 77 3" 203 8.00 216 8.50 283 11.13 74 2.94 180 7.1 695 27.4 260 10.2 - - - - 55 121 4" 229 9.00 241 9.50 305 12.00 100 3.94 245 9.6 800 31.5 270 10.6 - - - - 85 187 6" 267 10.50 279 11.00 403 15.88 150 5.94 344 13.5 1090 42.9 450 17.7 - - - - 140 309 8" 292 11.50 305 12.00 419 16.50 201 7.94 416 16.4 1263 49.7 450 17.7 1263 49.7 250 9.8 240 529 10" 330 13.00 343 13.50 457 18.00 252 9.94 501 19.7 1416 55.7 450 17.7 1416 55.7 250 9.8 350 772 12" 356 14.00 368 14.50 502 19.75 303 11.94 580 22.8 1592 62.7 500 19.7 1592 62.7 300 11.8 450 992 14" 381 15.00 394 15.50 572 22.50 334 13.19 635 25.0 1765 69.5 550 21.7 1765 69.5 310 12.2 600 1323 16" 406 16.00 419 16.50 610 24.00 385 15.19 719 28.3 2027 79.8 600 23.6 2027 79.8 310 12.2 750 1653 18" 432 17.00 445 17.50 660 26.00 436 17.19 810 31.9 2250 88.6 600 23.6 2265 89.2 460 18.1 890 1962 20" 457 18.00 470 18.50 711 28.00 487 19.19 1046 41.2 2350 92.5 700 27.6 2350 92.5 460 18.1 1120 2469 24" 508 20.00 521 20.50 813 32.00 589 23.19 1196 47.1 - - - - 2830 111.4 460 18.1 2000 4409 28" 610 24.00 - - 914 36.00 684 26.94 1250 49.2 - - - - 3144 123.8 610 24.0 2650 5842 30" 610 24.00 - - 914 36.00 735 28.94 1285 50.6 - - - - 3312 130.4 710 28.0 2950 6504 32" 711 28.00 - - 965 38.00 779 30.69 1196 47.1 - - - - 3570 140.6 710 28.0 3500 7716 36" 813 32.00 - - 1016 40.00 874 34.44 1517 59.7 - - - - 3923 154.4 900 35.4 5400 11905 40" 914 36.00 - - - - 976 38.44 1680 66.1 - - - - 4323 170.2 900 35.4 6750 14881 42 1220 48.00 - - 1798 70.79 1020 40.16 1726 68.0 - - - - 4610 181.5 1000 39.4 7400 16314 18 48 1540 60.63 - - 2040 80.31 1166 45.91 1876 73.9 - - - - 5120 201.6 1000 39.4 10500 23149

w w w. g w c v a l v e. c o m CLASS 300 Model 81300 DIMENSIONS Size RF RTJ BW B H HW (OPEN) W HG (OPEN) G WEIGHT inch mm in mm in mm in mm in mm in mm in mm in mm in mm in kg lbs 2" 216 8.50 232 9.13 216 8.50 49 1.94 145 5.7 470 18.5 260 10.2 - - - - 54 119 3" 283 11.13 298 11.75 283 11.13 74 2.94 181 7.1 695 27.4 260 10.2 - - - - 85 187 4" 305 12.00 321 12.63 305 12.00 100 3.94 248 9.8 800 31.5 270 10.6 - - - - 110 243 6" 403 15.88 419 16.50 403 15.88 150 5.94 343 13.5 1089 42.9 450 17.7 - - - - 240 529 8" 419 16.50 435 17.13 419 16.50 201 7.94 388 15.3 1326 52.2 450 17.7 1326 52.2 250 9.8 350 772 10" 457 18.00 473 18.63 457 18.00 252 9.94 505 19.9 1416 55.7 450 17.7 1416 55.7 250 9.8 510 1124 12" 502 19.75 518 20.38 502 19.75 303 11.94 582 22.9 1647 64.8 610 24.0 1647 64.8 300 11.8 750 1653 14" 762 30.00 778 30.63 762 30.00 334 13.19 642 25.3 1765 69.5 610 24.0 1765 69.5 300 11.8 1050 2315 16" 838 33.00 854 33.63 838 33.00 385 15.19 728 28.7 2031 80.0 710 28.0 2031 80.0 460 18.1 1460 3219 18" 914 36.00 930 36.63 914 36.00 436 17.19 800 31.5 - - - - 2305 90.7 460 18.1 2050 4519 20" 991 39.00 1010 39.75 991 39.00 487 19.19 893 35.2 - - - - 2350 92.5 460 18.1 2650 5842 24" 1143 45.00 1165 45.88 1143 45.00 589 23.19 1056 41.6 - - - - 2903 114.3 610 24.0 4200 9259 28" 1346 53.00 1372 54.00 1346 53.00 684 26.94 1206 47.5 - - - - 3174 125.0 710 28.0 5500 12125 30" 1397 55.00 1422 56.00 1397 55.00 735 28.94 1305 51.4 - - - - 3332 131.2 710 28.0 6500 14330 32" 1524 60.00 1553 61.13 1524 60.00 779 30.69 1364 53.7 - - - - 3620 142.5 900 35.4 7200 15873 36" 1727 68.00 1756 69.13 1727 68.00 874 34.44 1517 59.7 - - - - 3973 156.4 900 35.4 8900 19621 42 1798 70.79 - - 1798 70.79 1020 40.16 1626 64.0 - - - - 4610 181.5 1000 39.4 15000 33069 48 2040 80.31 - - 2040 80.31 1166 45.91 1776 69.6 - - - - 5120 201.6 1000 39.4 22500 49604 CLASS 600 Model 81600 DIMENSIONS Size RF RTJ BW B H HW (OPEN) W HG (OPEN) G WEIGHT inch mm in mm in mm in mm in mm in mm in mm in mm in mm in kg lbs 2" 292 11.50 295 11.63 292 11.50 49 1.94 150 5.9 480 18.9 280 11.0 - - - - 65 143 3" 356 14.00 359 14.13 356 14.00 74 2.94 201 7.9 735 28.9 300 11.8 - - - - 110 243 4" 432 17.00 435 17.13 432 17.00 100 3.94 260 10.2 799 31.5 300 11.8 - - - - 150 331 6" 559 22.00 562 22.13 559 22.00 150 5.94 416 16.4 1263 49.7 450 17.7 - - - - 285 628 8" 660 26.00 664 26.13 660 26.00 201 7.94 455 17.9 1326 52.2 450 17.7 1326 52.2 300 11.8 650 1433 10" 787 31.00 791 31.13 787 31.00 252 9.94 520 20.5 1473 58.0 520 20.5 1473 58.0 300 11.8 900 1984 12" 838 33.00 841 33.13 838 33.00 303 11.94 600 23.6 1647 64.8 610 24.0 1647 64.8 400 15.7 1100 2425 14" 889 35.00 892 35.13 889 35.00 334 13.19 655 25.8 1820 71.7 710 28.0 1820 71.7 460 18.1 1700 3748 16" 991 39.00 994 39.13 991 39.00 385 15.19 749 29.5 2036 80.2 900 35.4 2036 80.2 460 18.1 2300 5071 18" 1092 43.00 1095 43.13 1092 43.00 436 17.19 830 32.7 - - - - 2305 90.7 610 24.0 2750 6063 20" 1194 47.00 1200 47.25 1194 47.00 487 19.19 903 35.6 - - - - 2400 94.5 610 24.0 4200 9259 24" 1397 55.00 1407 55.38 1397 55.00 589 23.19 1086 42.8 - - - - 2953 116.3 710 28.0 4950 10913 28" 1549 61.00 1562 61.50 1549 61.00 684 26.94 1226 48.3 - - - - 3374 132.8 710 28.0 8250 18188 30" 1651 65.00 1664 65.50 1651 65.00 735 28.94 1320 52.0 - - - - 3492 137.5 900 35.4 9500 20944 32" 1778 70.00 1794 70.63 1778 70.00 779 30.69 1384 54.5 - - - - 3670 144.5 900 35.4 11500 25353 36" 2083 82.00 2099 82.63 2083 82.00 874 34.44 1530 60.2 - - - - 4093 161.1 900 35.4 15500 34172 42 1830 72.05 - - 1830 72.05 1020 40.16 1626 64.0 - - - - 4610 181.5 1000 39.4 20600 45415 48 2050 80.71 - - 2050 80.71 1166 45.91 1776 69.9 - - - - 5120 201.6 1000 39.4 28500 62832 CLASS 900 Model 81900 DIMENSIONS Size RF RTJ BW B H HW (OPEN) W HG (OPEN) G WEIGHT inch mm in mm in mm in mm in mm in mm in mm in mm in mm in kg lbs 2" 368 14.50 371 14.63 368 14.50 49 1.94 156 6.1 670 26.4 270 10.6 - - - - 90 198 3" 381 15.00 384 15.13 381 15.00 74 2.94 231 9.1 735 28.9 300 11.8 - - - - 162 357 4" 457 18.00 460 18.13 457 18.00 100 3.94 270 10.6 799 31.5 450 17.7 - - - - 285 628 6" 610 24.00 613 24.13 610 24.00 150 5.94 429 16.9 1343 52.9 500 19.7 - - - - 530 1168 8" 737 29.00 740 29.13 737 29.00 201 7.94 469 18.5 1326 52.2 500 19.7 1326 52.2 300 11.8 950 2094 10" 838 33.00 841 33.13 838 33.00 252 9.94 535 21.1 1573 61.9 610 24.0 1573 61.9 300 11.8 1300 2866 12" 965 38.00 968 38.13 965 38.00 303 11.94 615 24.2 - - - - 1667 65.6 460 18.1 1960 4321 14" 1029 40.50 1038 40.88 1029 40.50 322 12.69 670 26.4 - - - - 1820 71.7 460 18.1 2650 5842 16" 1130 44.50 1140 44.88 1130 44.50 373 14.69 769 30.3 - - - - 2176 85.7 500 19.7 3200 7055 18" 1219 48.00 1232 48.50 1219 48.00 423 16.69 890 35.0 - - - - 2247 88.5 610 24.0 4000 8818 20" 1321 52.00 1334 52.50 1321 52.00 471 18.56 923 36.3 - - - - 2501 98.5 610 24.0 5200 11464 24" 1549 61.00 1568 61.75 1549 61.00 570 22.44 1107 43.6 2970 116.9 710 28.0 9200 20283 19

G W C V A L V E I N T E R N A T I O N A L API 6D THROUGH CONDUIT PARALLEL EXPANDING GATE VALVE Model 82300/82600/82900/821500/822500 Dimensions and Weights Hand Wheel and Bevel Gear Operated CLASS 300 Model 82300 DIMENSIONS Size RF RTJ BW B H HW W (Double) HG G (Double) Weight inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch kg lbs 2" 216 8.50 232 9.13 216 8.50 49 1.94 145 5.7 470 18.5 260 10.2 - - - - 54 119 3" 283 11.13 298 11.75 283 11.13 74 2.94 181 7.1 695 27.4 260 10.2 - - - - 85 187 4" 305 12.00 321 12.63 305 12.00 100 3.94 248 9.8 800 31.5 300 11.8 - - - - 110 243 6" 403 15.88 419 16.50 403 15.88 150 5.94 343 13.5 1089 42.9 450 17.7 - - - - 240 529 8" 419 16.50 435 17.13 419 16.50 201 7.94 388 15.3 1326 52.2 500 19.7 1326 52.2 300 11.8 350 772 10" 457 18.00 473 18.63 457 18.00 252 9.94 505 19.9 1416 55.7 600 23.6 1416 55.7 450 17.7 510 1124 12" 502 19.75 518 20.38 502 19.75 303 11.94 582 22.9 1647 64.8 650 25.6 1647 64.8 600 23.6 750 1653 14" 762 30.00 778 30.63 762 30.00 334 13.19 642 25.3 1765 69.5 750 29.5 1765 69.5 600 23.6 1050 2315 16" 838 33.00 854 33.63 838 33.00 385 15.19 728 28.7 2031 80.0 - - 2031 80.0 650 25.6 1460 3219 18" 914 36.00 930 36.63 914 36.00 436 17.19 800 31.5 - - - - 2305 90.7 900 35.4 2050 4519 20" 991 39.00 1010 39.75 991 39.00 487 19.19 893 35.2 - - - - 2350 92.5 900 35.4 2650 5842 24" 1143 45.00 1165 45.88 1143 45.00 589 23.19 1056 41.6 - - 2903 114.3 900 35.4 4200 9259 28" 1346 53.00 1372 54.00 1346 53.00 684 26.94 1206 47.5 - - - - 3174 125.0 900 35.4 5500 12125 30" 1397 55.00 1422 56.00 1397 55.00 735 28.94 1305 51.4 - - - - 3332 131.2 900 35.4 6500 14330 32" 1524 60.00 1553 61.13 1524 60.00 779 30.69 1364 53.7 - - 3620 142.5 900 35.4 7200 15873 36" 1727 68.00 1756 69.13 1727 68.00 874 34.44 1517 59.7 - - - - 3973 156.4 900 35.4 8900 19621 42 1798 70.79 - - 1798 70.79 1020 40.16 1626 64.0 - - - - 4610 181.5 1000 39.4 15000 33069 48 2040 80.31 - - 2040 80.31 1166 45.91 1776 69.6 - - - - 5120 201.6 1000 39.4 22500 49604 20

w w w. g w c v a l v e. c o m CLASS 600 Model 82600 DIMENSIONS Size RF RTJ BW B H HW W (Double) HG G (Double) Weight inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch kg lbs 2" 292 11.50 295 11.63 292 11.50 49 1.94 150 5.9 480 18.9 280 11.0 - - - - 65 143 3" 356 14.00 359 14.13 356 14.00 74 2.94 201 7.9 735 28.9 400 15.7 - - - - 110 243 4" 432 17.00 435 17.13 432 17.00 100 3.94 260 10.2 799 31.5 500 19.7 - - - - 150 331 6" 559 22.00 562 22.13 559 22.00 150 5.94 416 16.4 1263 49.7 560 22.0 - - - - 285 628 8" 660 26.00 664 26.13 660 26.00 201 7.94 455 17.9 1326 52.2 700 27.6 1326 52.2 300 11.8 650 1433 10" 787 31.00 791 31.13 787 31.00 252 9.94 520 20.5 1473 58.0 750 29.5 1473 58.0 450 17.7 900 1984 12" 838 33.00 841 33.13 838 33.00 303 11.94 600 23.6 1647 64.8-1647 64.8 610 24.0 1100 2425 14" 889 35.00 892 35.13 889 35.00 334 13.19 655 25.8 1820 71.7-1820 71.7 610 24.0 1700 3748 16" 991 39.00 994 39.13 991 39.00 385 15.19 749 29.5 2036 80.2 - - 2036 80.2 710 28.0 2300 5071 18" 1092 43.00 1095 43.13 1092 43.00 436 17.19 830 32.7 - - - - 2305 90.7 900 35.4 2750 6063 20" 1194 47.00 1200 47.25 1194 47.00 487 19.19 903 35.6 - - - - 2400 94.5 900 35.4 4200 9259 24" 1397 55.00 1407 55.38 1397 55.00 589 23.19 1086 42.8 - - - 2953 116.3 900 35.4 4950 10913 28" 1549 61.00 1562 61.50 1549 61.00 684 26.94 1226 48.3 - - - - 3374 132.8 900 35.4 8250 18188 30" 1651 65.00 1664 65.50 1651 65.00 735 28.94 1320 52.0 - - - - 3492 137.5 900 35.4 9500 20944 32" 1778 70.00 1794 70.63 1778 70.00 779 30.69 1384 54.5 - - - 3670 144.5 900 35.4 11500 25353 36" 2083 82.00 2099 82.63 2083 82.00 874 34.44 1530 60.2 - - - - 4093 161.1 900 35.4 15500 34172 42 1830 72.05 - - 1830 72.05 1020 40.16 1626 64.0 - - - - 4610 181.5 1000 39.4 20600 45415 48 2050 80.71 - - 2050 80.71 1166 45.91 1776 69.9 - - - - 5120 201.6 1000 39.4 28500 62832 CLASS 900 Model 82900 DIMENSIONS Size RF RTJ BW B H HW W (Double) HG G (Double) Weight inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch kg lbs 2" 368 14.50 371 14.63 368 14.50 49 1.94 156 6.1 670 26.4 270 10.6 - - - - 90 198 3" 381 15.00 384 15.13 381 15.00 74 2.94 231 9.1 735 28.9 400 15.7 - - - - 162 357 4" 457 18.00 460 18.13 457 18.00 100 3.94 270 10.6 799 31.5 500 19.7 - - - - 285 628 6" 610 24.00 613 24.13 610 24.00 150 5.94 429 16.9 1343 52.9 560 22.0 - - - - 530 1168 8" 737 29.00 740 29.13 737 29.00 201 7.94 469 18.5 1326 52.2 750 29.5 1326 52.2 305 12.0 950 2094 10" 838 33.00 841 33.13 838 33.00 252 9.94 535 21.1 1573 61.9 750 29.5 1573 61.9 460 18.1 1300 2866 12" 965 38.00 968 38.13 965 38.00 303 11.94 615 24.2 - - 1667 65.6 610 24.0 1960 4321 14" 1029 40.50 1038 40.88 1029 40.50 322 12.69 670 26.4 - - 1820 71.7 710 28.0 2650 5842 16" 1130 44.50 1140 44.88 1130 44.50 373 14.69 769 30.3 - - - 2176 85.7 900 35.4 3200 7055 18" 1219 48.00 1232 48.50 1219 48.00 423 16.69 890 35.0 - - - - 2247 88.5 900 35.4 4000 8818 20" 1321 52.00 1334 52.50 1321 52.00 471 18.56 923 36.3 - - - - 2501 98.5 900 35.4 5200 11464 24" 1549 61.00 1568 61.75 1549 61.00 570 22.44 1107 43.6 - - - 2970 116.9 900 35.4 9200 20283 21

G W C V A L V E I N T E R N A T I O N A L CLASS 1500 Model 821500 DIMENSIONS Size RF RTJ BW B H HW W (Double) HG G (Double) Weight inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch kg lbs 2" 368 14.50 371 14.63 368 14.50 49 1.94 160 6.3 680 26.8 400 15.7 - - - - 120 265 3" 470 18.50 473 18.63 470 18.50 74 2.94 202 8.0 785 30.9 500 19.7 - - - - 250 551 4" 546 21.50 549 21.63 546 21.50 100 3.94 286 11.3 850 33.5 600 23.6 - - - - 385 849 6" 705 27.75 711 28.00 705 27.75 144 5.69 380 15.0 1170 46.1 800 31.5 1380-610 - 925 2039 8" 832 32.75 841 33.13 832 32.75 192 7.56 485 19.1 - - - - 1520 59.8 710 28.0 1520 3351 10" 991 39.00 1000 39.38 991 39.00 239 9.44 610 24.0 - - - - 1765 69.5 710 28.0 2300 5071 12" 1130 44.50 1146 45.13 1130 44.50 287 11.31 710 28.0 - - - - 1825 71.9 900 35.4 3200 7055 14" 1257 49.50 1276 50.25 1257 49.50 315 12.44 790 31.1 - - - - 2145 84.4 900 35.4 4500 9921 16" 1384 54.50 1407 55.38 1384 54.50 360 14.19 890 35.0 - - - - 2387 94.0 900 35.4 5900 13007 18" 1537 60.50 1559 61.38 1537 60.50 406 16.00 990 39.0 - - - - 3365 132.5 900 35.4 7500 16535 20" 1664 65.50 1686 66.38 1664 65.50 454 17.88 1090 42.9 - - - - 3580 140.9 900 35.4 10500 23149 24" 1943 76.50 1972 77.63 1943 76.50 546 21.50 1270 50.0 - - - 3970 156.3 900 35.4 16500 36376 CLASS 2500 Model 822500 DIMENSIONS Size RF RTJ BW B H HW W (Double) HG G (Double) Weight inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch kg lbs 2" 451 17.75 454 17.88 451 17.75 42 1.69 165 6.5 715 28.1 400 15.7 - - - - 180 397 3" 578 22.75 584 23.00 578 22.75 62 2.44 212 8.3 810 31.9 500 19.7 - - - - 350 772 4" 673 26.50 683 26.88 673 26.50 87 3.44 265 10.4 895 35.2 800 31.5 930-610 - 550 1213 6" 914 36.00 927 36.50 914 36.00 131 5.19 380 15.0 - - - - 1365-610 - 1420 3131 8" 1022 40.25 1038 40.88 1022 40.25 179 7.06 480 18.9 - - - - 1485 58.5 610 24.0 2340 5159 10" 1270 50.00 1292 50.88 1270 50.00 223 8.81 580 22.8 - - - - 1785 70.3 610 24.0 4100 9039 12" 1422 56.00 1445 56.88 1422 56.00 265 10.44 680 26.8 - - - - 1980 78.0 610 24.0 5850 12897 22

w w w. g w c v a l v e. c o m FLOW COEFFICIENTS (Cv) VALUE Cv is a number measured in gallons/minute, which is calculated from the flow of water through the valve with a 1 psi pressure drop across the valve length. VALVE SIZE INCH Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500 2 482 482 482 482 437 258 2.5 740 740 740 728 678 355 3 1085 1085 1085 1072 986 514 4 2136 2136 2136 1890 1760 735 6 5230 5230 5230 4383 3722 2710 8 9054 9054 9054 8416 7279 5527 10 14856 14856 14856 14087 12283 8513 12 22150 22150 22150 21025 17843 13282 14 27883 27883 27883 25846 21336-16 38224 38224 38224 35358 29548-18 51740 51740 51740 46004 - - 20 70386 70386 70386 62871 - - 22 86869 86869 86869 - - - 24 116835 116835 116835 - - - 26 123222 123222 123222 - - - 30 210229 210229 210229 - - - 32 257251 257251 257251 - - - 36 325362 325362 325362 - - - 42 431050 431050 431050 - - - 48 472200 472200 472200 - - - Flow Characteristics Close to Open The graph depicts the approximate percentage of the flow coefficient (Cv) as the valve is stroked from the closed to open position. Percent of Cv Percent of Valve Stroke 23

G W C V A L V E I N T E R N A T I O N A L TERMS & CONDITIONS OF SALE 24 Scope These terms and conditions apply to all GWC valve products, and supersedes all previously published terms and conditions. Hereafter, GWC Valve International, Inc. shall be referred to as GWC. Special terms and conditions printed on a buyer s order will only apply insofar as they conform to the terms and conditions detailed on these pages. Terms and conditions of an order that change or modify those on this sheet shall not be binding on GWC. Approval All quotations, contracts, orders, or agreements are subject to approval and/or acceptance by the main office of GWC. We reserve the right to correct clerical or stenographic errors in quotations, orders, invoices, and other contracts, agreements, or documents. Prices Possession of price lists will not be accepted by GWC as an obligation, or offer to sell the goods listed therein to anyone. All prices contained therein are subject to change without notice, and supersede all previous lists. All orders will be invoiced at prices in effect at the time of shipment unless quoted in writing. Changes Orders cannot be cancelled or specifications be changed without the consent of GWC, and then only in terms indemnifying GWC against loss. Quotations Goods quoted F.O.B. our service center are subject to prior sale. Prices quoted are valid only for the duration indicated in the quotation. Quoted prices supersede all previous prices, quotations, or contracts, and are subject to change without notice. Cancellations Orders placed with us cannot be cancelled without our prior written consent. A cancellation charge will be applicable as outlined in our quotation. Claims All claims for shortages, corrections, or deductions must be made within 10 days after receipt of goods. Responsibility for goods lost or damaged in transit rests with carrier, and claims should be filed with the carrier by the consignee. Delivery of material to a common carrier shall be considered delivery to the buyer, and shall be at the buyers risk thereafter. Delivery Delays We assume no responsibility for delays in delivery, or defaults resulting from strikes, work stoppages, fires, floods, accidents, war, inability to obtain materials, or any other cause unavoidable and beyond our control. Taxes GWC quotations and/or contracts do not include any municipal, state, or federal sales, excise, use occupational, or other taxes, and any such tax, if paid by us will be charged to the purchaser. Catalog Illustrations Catalog illustrations are actual representations of a certain size of each product line, but do not necessarily represent all sizes in details. We reserve the right to institute changes in materials, designs, and specifications without notice in keeping with our policy of continuing product improvement. Catalog Weights Catalog weights represent average weights of products and are in no sense guaranteed. Returns See Return Goods Policy on next page. Special Orders Orders for special goods must be in writing and accompanied with detailed prints and/or sets of specifications, unless specifications on the orders are definite and complete. Orders will not be entered with the factory unless this is adhered to. Cancellation charges will be as outlined in our quotations. Freight Terms All shipments are F.O.B. our service centers. See current bulletin for freight allowance. Warranty See warranty on reverse side

w w w. g w c v a l v e. c o m RETURN GOODS POLICY This policy supersedes all other policies for return goods. I. Goods returned at customers request: A. Material must be: 1. Of our manufacture. 2. In clean, new and saleable condition. It must have been stored inside out of the weather. 3. Shipped from one of our service centers within the 12 calendar months preceding the request for return, and the return will not cause inventory to exceed maximum allowable levels. 4. Personally inspected by a GWC representative prior to its return. 5. Special or non-standard items are non-returnable. B. Return shipments must be prepaid. C. Credit will be allowed at invoice price, less 25% handling cost, and less any freight paid by GWC. D. A Return Goods Card must be furnished by a GWC representative after inspection of the material, and must be returned with the shipment. E. Shipments received without a Return Goods Authorization Card will be refused. Customer will be responsible for any storage and/or return freight. F. Material returned which is not of GWC manufacture, not in clean and saleable condition, or not authorized for return will be returned to the customer freight collect. II. Goods returned because of an error by GWC. A. Material must be in a clean, new, saleable condition. B. Return shipment should be made freight collect. C. Full credit will be allowed. D. Customer must receive Return Goods authorization prior to the return of the material. Return Goods Authorization Card must accompany shipment. Shipments received without Return Goods Authorization Card will be refused. Return Goods Authorization Card should be attached to the packing list. All requests to return material to GWC Valve International, Inc. must be submitted in writing to our National Sales Manager for authorization. WARRANTY GWC Valve International, Inc. warrants each product sold, if the products are of our manufacture, against defects in material and workmanship under normal use and service for a period of one year after date of shipment. This warranty is made to the buyer only, and does not extend to any other party. The obligation of GWC Valve International, Inc. under this warranty is limited to: (a) replacement of any part or parts proven defective in material or workmanship, (b) repair of the product F.O.B. the factory or service center, (c) refund of the purchase price. In the case of product or parts not wholly of GWC s manufacture, GWC s liability under this warranty shall be limited to the extent of GWC s recovery from the manufacturer of such parts under its warranty to GWC. This warranty does not extend to any claims for labor, consequential damages, down time, or any other loss, damage, or expense of any kind arising out of the defect. We do not allow claims for unauthorized repairs, labor, or material. We are not responsible for loss of use, personal injury, lost profits, or any other damages whatsoever in connection with the warranties set forth. No warranty shall apply to any product which has been modified or changed in design or function after leaving GWC s facilities or which is misused or operated beyond its design capabilities, or used for other than its intended purpose. Purchasers of GWC products should consult knowledgeable advisors in the selection of product type and material of construction for their specific use. The buyer assumes all risk of this selection. The buyer shall permit GWC or its authorized representative to inspect the product so that it may determine its obligation. GWC shall be entitled to the return of the defective product or parts. Buyer must notify GWC promptly upon discover of any claimed defect. No material may be returned without first obtaining written permission from GWC Valve International, Inc. 25

G W C V A L V E I N T E R N A T I O N A L NOTES 26

w w w. g w c v a l v e. c o m NOTES 27

GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE USA HEADQUARTERS GWC Valve International, Inc. 4301 Yeager Way Bakersfield, CA 93313 sales@gwcvalve.com Phone: 661-834-1775 Fax: 661-834-2072 w e b s i t e : w w w. g w c v a l v e. c o m