Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Applications For use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners; in refineries; and in other areas where ignitable vapors, dust, moisture and corrosive elements may be present. Suitable for outdoor saltwater locations and for other wet locations. Features Fixtures operate safely in high ambient temperatures. Arrangement of heat-producing components results in efficient heat dissipation for cooler fixture operation. Patented wireless design. Threading of fixture unit onto mounting hood makes electrical connection. Only wiring required is attaching two wires to connection block in mounting hood. Connection block is easily wired: (a) loosen two screws, (b) make wire connections, and (c) re-position connection block. Safe, easy servicing without disconnecting any wiring. Wireless fixture unit threads off mounting hood for convenient servicing or for immediate replacement with a stand-by unit. Acme double-lead threads speed installation and fixture removal from mounting hood only half as many turns are required as for single-lead threads. The threads do not stick or gall, eliminating problems often encountered with single-lead threads during fixture unit removal. All threaded joints are flame-tight. Integrally ballasted HID lighting fixtures; separate ballasts not required. Factory sealed. External seals not required for Groups C and D. Fixtures for use in NEC Group B locations furnished complete with UL required sealing fitting. Not required for CEC approval. Strategic location of lamp socket, in combination with interior prism design of the glass globe, provides optimum light distribution and control. Heat and impact-resistant globes have smooth dust-resistant exterior. Superior corrosion resistance, with epoxy powder coat finish. Shock-absorbing medium-base socket mounts prolong lamp life. Porcelain socket with nickel-plated phosphor bronze screw shell. Assures long trouble-free operation in high ambient areas. Choice of mountings: pendant, ceiling, bracket and stanchion. Fiberglass-reinforced polyester reflectors, in standard dome, or 30 angle styles, are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. Optional guards protect globes from damage. Secured to fixture with three stainless steel screws. Variety of light sources: high pressure sodium, pulse start metal halide and metal halide. HPS is excellent where long lamp life is required. HPS provides high lumens per watt and is less expensive to operate. PSMH and MH are desirable where colors in illuminated areas must be close to natural. A wide range of ballasts and voltages are available for both domestic and export applications. Ballasts operate at low temperatures PSMH/MH: -29 C (-20 F); HPS: -40 C (-40 F). 50 W through 50 W high pressure sodium ballasts are high reactance, high power factor type. Standard Materials Ballast bodies and guards: copperfree (4/0 of % max.) aluminum Pendant mounting hoods: diecast copperfree (4/0 of % max.) aluminum Ceiling, bracket and stanchion mounting hoods: sand cast copperfree (4/0 of % max.) aluminum Reflectors: fiberglass reinforced polyester Standard Finishes Ballast bodies, guards and mounting hoods: epoxy powder coat finish, electrostatically applied for complete, uniform corrosion protection Options Fuses: order fuses for field installation by catalog number, see Ballast and Fuse Kit Data. Hot Restrike add suffix -R. Smart Starter add suffix -S. Emergency Options available for 50 W through 50 W HPS only. For CEC Exd IIB + H2 rating, add suffix -Z V. For safety chain, add suffix -SC. Certifications and Compliances UL Standard: UL 598, UL 844 UL Listed: E0444 CSA Standard: C22.2 No. 250, C22. 2No. 37 CSA Certified: 025428 Related Products For sealing fittings, see the Fittings Section. 230 Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G +40 C (+04 F) ➊ +55 C (+3 F) ➊ +65 C (+49 F) ➊ +40 C (+04 F) ➋ Lamp Watts T Numbers Represent the Maximum Surface Temperature for Class I, Division Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division Locations. T Number T 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range ( F) Temp. Range ( C) 664-842 35-450 69-662 326-350 Ballast Type 574-67 30-325 538-572 28-300 Ambient Temp. T Numbers 502-536 26-280 448-500 23-260 Supply Wire Temp C/ F 42-446 26-230 Ambient Temp. T Numbers 394-49 20-25 358-392 8-200 Supply Wire Temp C/ F 33-356 66-80 Ambient Temp. T Numbers 322-329 6-65 277-320 36-60 Supply Wire Temp C/ F 250-275 2-35 Ambient Temp. T Numbers 24-248 0-20 87-22 86-00 Supply Wire Temp C/ F High Pressure Sodium Medium Base Lamps 50 MT, TT T6 75 (67) T5 75 (67) T4A 75 (67) T4 75 (67) 70 MT, TT, 480 V T5 75 (67) T4A 75 (67) T4A 75 (67) T4 90 (94) 00 MT, TT, 480 V T4A 75 (67) T4 90 (94) T3B 90 (94) 50 MT, TT, 480 V T3C 75 (67) Pulse Start Metal Halide Medium Base Lamps 50 MT, TT T6 75 (67) T5 75 (67) T4A 90 (94) T3C 90 (94) 70 MT, TT, 480 V T5 75 (67) T4A 75 (67) T4A 90 (94) T3C 90 (94) 00 MT, TT, 480 V T4A 90 (94) T4A 90 (94) 75 MT, TT, 480 V T3B 90 (94) Metal Halide Medium Base Lamps V 75 MT, TT, 480 V T3B 85 (85) 85 85 Fixture and Accessory Weights kg (lb) Fixture Size Fixture Weight Reflector Weight Guard Weight 35 W thru 75 W 2.70-4.5 (28-32).36 (3) 0.45 () Mounting Hood Weights lbs/kgs Pendant Ceiling Bracket Stanchion 0.9 (2).8 (4) 2.72 (6) 0.9 (2) NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code and the Canadian Electrical Code. MT is Multi-Tap for 20/208/240/277 V, TT is Tri-Tap for 20/277/347 V. ➊ Class I, Division Locations. ➋ Class II, Division Locations. Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204 23
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Type Mounting Pendant - One Hub, Rigid or Flexible Mounting Lamp Watts 50 S68 ANSI Lamp Type ➎ Catalog Number➌ ➋ HPS PSMH Hub Size (Inches) HPS➋ ➊ PSMH M0 CJLPB5075 ➌ CJHPB5075 ➌ 70 S62 00 S54 M98 CJLPB7075 ➍ CJHPB7075 ➍ M90 CJLPB075 ➍ CJHPB075 ➍ 50 S55 CJLPB575 ➍ 75 M52 CJPPB775 ➍ 25 Stanchion - One Hub 50 S68 M0 -/2 CJLSB5050 ➌ CJHSB5050 ➌ Mounting Hoods Type Mounting 70 00 50 S62 S54 S55 M98 -/2 CJLSB7050 ➍ CJHSB7050 ➍ M90 -/2 CJLSB050 ➍ CJHSB050 ➍ -/2 CJLSB550 ➍ 75 M52 -/2 CJPSB750 ➍ Pendant 25 Stanchion Hub Size (Inches) Catalog Number One Hub CAP-75B One Hub -/2 CAS-50B ➊ Add suffix -SR (after adding voltage suffix) for Smart Hot Strike emergency option, -R for Hot Restrike and -S for Smart Starter options. ➋ To order fixture with guard, add suffix -G (before adding voltage suffix). ➌ Add voltage -MT for 20/208/240/277 V. For 480 V, contact your sales representative. ➍ Add voltage suffix -MT for 20/208/240/277 V, or -48 for 480 V. Contact your sales representative for available 50 Hz ballasts. ➎ Refer to lamp manufacturer s data regarding lamp burning position restrictions. ➏ 35 W fixtures have 20 V ballast; add suffix -2 232 Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups C, D Class II, Division and 2, Groups E, F, G Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Lamp ANSI Lamp Type ➏ Hub Size ➐ Catalog Number ➋ Watts HPS PSMH/MH (Inches) HPS ➊ PSMH MH Pendant One Hub, Rigid or Flexible Mounting CJLP5075MT ➌ CJHP5075MT ➌ CJLP5075TTCN V ➌ CJHP5075TTCN V ➌ 50 S68 M0 CJLP500MT ➌ CJHP500MT ➌ CJLP500TTCN V ➌ CJHP500TTCN V ➌ CJLP7075MT ➍ CJHP7075MT ➍ CJLP7075TTCN V➎ CJHP7075TTCN V➎ 70 S62 M98 CJLP700MT ➍ CJHP700MT ➍ CJLP700TTCN V➎ CJHP700TTCN V➎ CJLP075MT ➍ CJHP075MT ➍ CJLP075TTCN V➎ CJHP075TTCN V➎ 00 S54 M90 CJLP00MT ➍ CJHP00MT ➍ CJLP00TTCN V➍ CJHP00TTCN V➎ CJLP575MT ➍ CJLP575TTCN V➎ 50 S55 CJLP50MT ➍ CJLP50TTCN V➍ CJPP775MT ➍ CJHP775MTCN V ➍ CJPP775TTCN V➎ CJHP775TTCN V➎ 75 M52 CJPP70MT ➍ CJHP70MTCN V➍ CJPP70TTCN V➎ CJHP70TTCN V➎ Ceiling Four Hubs, Three Close-Up Plugs CJLC5075MT ➌ CJHC5075MT ➌ CJLC5075TTCN V➌ CJHC5075TTCN V➌ 50 S68 M0 CJLC500MT ➌ CJHC500MT ➌ CJLC500TTCN V➌ CJHC500TTCN V➌ CJLC7075MT ➍ CJHC7075MT ➍ CJLC7075TTCN V➎ CJHC7075TTCN V➎ 70 S62 M98 CJLC700MT ➍ CJHC700MT ➍ CJLC700TTCN V➎ CJHC700TTCN V➎ CJLC075MT ➍ CJHC075MT ➍ CJLC075TTCN V➎ CJHC075TTCN V➎ 00 S54 M90 CJLC00MT ➍ CJHC00MT ➍ CJLC00TTCN V➎ CJHC00TTCN V➎ CJLC575MT ➍ CJLC575TTCN V➎ 50 S55 CJLC50MT ➍ CJLC50TTCN V➎ CJPC775MT ➍ CJHC775MTCN V➍ CJPC775TTCN V➎ CJHC775TTCN V➎ 75 M52 CJPC70MT ➍ CJHC70MTCN V➍ CJPC70TTCN V➎ CJHC70TTCN V➎ ➊ Add suffix -R for Hot Restrike and -S for Smart Starter options. ➋ To order fixture with guard, add suffix -G before adding voltage suffix. ➌ For 480 V, contact your sales representative. ➍ Change voltage suffix -MT to -48 for 480 V. ➎ Change voltage suffix -TT (20/277/347 V) to -MT for 20/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V ➏ Refer to lamp manufacturer s data regarding lamp burning position restrictions. ➐ Fixtures with hubs listed for Class I, Group D, and Class II, Groups E, F, G only. Shaded area indicates items suitable for Class I, Division, Group B. V Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204 233
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups C, D Class II, Division and 2, Groups E, F, G Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Lamp ANSI Lamp Type ➏ Hub Size ➐ Catalog Number ➋ Watts HPS PSMH/MH (Inches) HPS ➊ PSMH MH Bracket Four Hubs, Three Close-Up Plugs CJLB5075MT ➌ CJHB5075MT ➌ CJLB5075TTCN V➌ CJHB5075TTCN V➌ 50 S68 M0 CJLB500MT ➌ CJHB500MT ➌ CJLB500TTCN V➌ CJHB500TTCN V➌ CJLB7075MT ➍ CJHB7075MT ➍ CJLB7075TTCN V➎ CJHB7075TTCN V➎ 70 S62 M98 CJLB700MT ➍ CJHB700MT ➍ CJLB700TTCN V➎ CJHB700TTCN V➎ CJLB075MT ➍ CJHB075MT ➍ CJLB075TTCN V➎ CJHB075TTCN V➎ 00 S54 M90 CJLB00MT ➍ CJHB00MT ➍ CJLB00TTCN V➎ CJHB00TTCN V➎ CJLB575MT ➍ CJLB575TTCN V➎ 50 S55 CJLB50MT ➍ CJLB50TTCN V➎ CJPB775MT ➍ CJHB775MTCN V➍ CJPB775TTCN V➎ CJHB775TTCN V➎ 75 M52 CJPB70MT ➍ CJHB70MTCN V➍ CJPB70TTCN V➎ CJHB70TTCN V➎ 25 Stanchion One Hub -/4 or -/2 CJLS5050MT ➌ CJHS5050MT ➌ 50 S68 M0 ➑ CJLS5050TTCN V➌ CJHS5050TTCN V➌ -/4 or -/2 CJLS7050MT ➍ CJHS7050MT ➌ 70 S62 M98 ➑ CJLS7050TTCN V➍ CJHS7050TTCN V➌ -/4 or -/2 CJLS050MT ➍ CJHS050MT ➌ 00 S54 M90 ➑ CJLS050TTCN V➍ CJHS050TTCN V➌ -/4 or -/2 CJLS550MT ➍ 50 S55 ➑ CJLS550TTCN V➍ 75 M52 -/4 or -/2 CJPS750MT CJHS750MTCN V ➑ CJPS750TTCN V CJHS750TTCN V ➊ Add suffix -R for Hot Restrike and -S for Smart Starter options. ➋ To order fixture with guard, add suffix -G before adding voltage suffix. ➌ For 480 V, contact your sales representative. ➍ Change voltage suffix -MT to -48 for 480 V. ➎ Change voltage suffix -TT (20/277/347 V) to -MT for 20/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V ➏ Refer to lamp manufacturer s data regarding lamp burning position restrictions. ➐ Fixtures with hubs listed for Class I, Group D, and Class II, Groups E, F, G only. ➑ -/2" tapped hub furnished with -/2" to -/4" reducer. Shaded area indicates items suitable for Class I, Division, Group B. V 234 Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204
Code Master Jr. HID Factory Sealed Luminaire Mounting Hoods and Fixture Units Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups B,C, D Class II, Division and 2, Groups E, F, G Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Mounting Hoods Pendant One Hub Ceiling Four Hubs, Three Close-Up Plugs Hub Size (Inches) Catalog Number CAP-75 ➋ CAP-00 CAC-75 ➋ CAC-00 Bracket Four Hubs, Three Close-Up Plugs 25 Stanchion One Hub Mounting Adapter with Connection Block CALB-75 ➋ CALB-00 -/4 or -/2 ➊ CAS-50 Permits use of existing A-5 mounting hoods (AAC Ceiling or AALB Bracket) with the new Code Master 2 Fixture Unit. After removing existing fixture unit and adapter, screw in the new CMAD- Adapter. Then thread new fixture unit into the CMAD-. Fixture Units Ballast body with globe. Indicate voltage desired by adding voltage suffix to fixture unit catalog number listed below. Type High Pressure Sodium ➌ High Power Factor (Min. P.F. 90%) Pulse Start Metal Halide Constant Wattage (Min. P.F. 90%) Metal Halide V Constant Wattage (Min. P.F. 90%) Lamp Watts Fixture Unit Number CMAD- Add Voltage Suffixes 20/208/240/277 20/277/347 V➍ 480 V 50 CJB50L- MT TTCN 70 CJB70L- MT TTCN 48 00 CJB00L- MT TTCN 48 50 CJB50L- MT TTCN 48 50 CJB50H- MT TTCN 70 CJB70H- MT TTCN 48 00 CJB00H- MT TTCN 48 75 CJB75P- MT TTCN 48 75 CJB75H- MT TT C6 ➊ -/2 Tapped hub furnished with -/2 to -/4 reducer. ➋ Mounting Hoods with hub listed for Class I, Group D; Class II, Groups E,F,G; and only. ➌ Add suffix -R for Hot Restrike and -S for Smart Starter options. ➍ Change voltage suffix -TTCN to -MTCN for 20/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V, V Shaded area indicates items suitable for Class I, Division, Group B. Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204 235
Code Master Jr. HID Factory Sealed Luminaire Accessories Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Polyester Reflectors Description Catalog Number Standard Dome 30 Angle KR2-ST KR2-AN Standard Dome Three-Way Exit Sign 30 Angle Epoxy enameled steel 6 -high red lettering Mounts to Code Master Jr. fixture units in place of guard. CJEXRN Single Sided Exit Sign Epoxy enameled steel 6 -high red lettering Mounts to Code Master Jr. fixture units in place of guard. *Contact your sales representative regarding hazardous location suitability. AEXR-5R Prismatic Glass Globe and Ring Assembly 50 W through 75 W Aluminum Guards 50 W through 75 W CJGL-75 CJGU-5 Replacement Sockets 50 W through 75 W Medium base sockets CJMS-75 Connection Block 50 W through 75 W For all Code Master fixtures VPT-7 HPS Hot Restrike Restrikes HPS lamp immediately when power is restored after a momentary power interruption. Optional for fixture watts of 50, 70, 00 or 50 (HPS only) Add suffix -R Smart Starter Smart Starter is for HPS fixtures only. Incorporates a -/2-minute timer and performs as a conventional starter to normally start lamp. Removes itself from circuit if lamp burns out or is removed from socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location which reduces maintenance and repair costs. Optional for all HPS and PSMH fixtures. Add suffix -S 236 Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204
Code Master Jr. HID Factory Sealed Luminaire Ballast and Fuse Kit Data Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Class I, Division and 2, Groups B, C, D Class II, Division and 2, Groups E, F, G Lamp High Pressure Sodium HX-H.P.F. ➊ Ballast Amps Pulse Start Metal Halide HX-H.P.F. ➊ Super CWA ➋ Watts Volts Start Operating Start Operating 50 Fuse Quantity Required Fuse Kit Catalog Number HPS PSMH MH V 20 0.58 0.58 0.87 0.60 CF-5 CF-3 208 0.35 0.33 0.5 0.40 2 CF-3 CF-3 240 0.3 0.29 0.47 0.35 2 CF-3 CF-2 277 0.25 0.25 0.32 0.32 CF-2 CF-2 347 V 480 20 0.90 0.82 0.80 0.85 CF-5 CF-5 70 00 50 75 208 0.50 0.48 0.50 0.52 2 CF-3 CF-3 240 0.44 0.4 0.43 0.44 2 CF-3 CF-3 277 0.35 0.36 0.39 0.39 CF-2 CF-2 347 V 0.30 0.30 0.20 0.28 CF-2 CF-2 480 0.2 0.2 0.26 0.23 2 CF-2 CF-2 20.30.5.20.5 CF-8 CF-8 208 0.76 0.67 0.70 0.70 2 CF-5 CF-5 240 0.66 0.58 0.6 0.58 2 CF-5 CF-3 277 0.60 0.50 0.55 0.50 CF-3 CF-3 347 V 0.45 0.30 0.40 0.40 CF-2 CF-2 480 0.33 0.3 0.30 0.35 2 CF-3 CF-2 20 2.00.66 CF-0 208.6 0.96 2 CF-5 240.00 0.83 0.85 0.80 2 CF-5 CF-5 277.00 0.83 CF-5 347 V 0.52 0.56 0.55 0.65 CF-3 480 0.88 0.75 2 CF-5 20.30.80 0.90.78 CF-5 CF-5 208 0.75.04 0.50.08 2 CF-3 CF-3 240 0.65 0.90 0.35 0.89 2 CF-3 CF-3 277 0.55 0.80 0.30 0.76 CF-2 CF-2 347 V 0.27 0.65 0.25 0.65 CF-2 CF-2 480 0.35 0.45 0.25 0.50 2 CF-2 CF-2 Fuse Kit includes fuse, fuse holder and necessary hardware for field installation. Mounts easily in ballast body with one screw. Order one fuse for 20 V and 277 V, and 2 fuses for 208, 240 and 480 V. CF-2 = 2 Amp; CF-3 = 3 Amp; CF-5 = 5 Amp; CF-8 = 8 Amp; CF-0 = 0 Amp ➊ 35 W through 50 W HPS and 50 W through 00 W PSMH have H.P.F. High Reactance ballasts. ➋ 75 W PSMH 480 volts has CWA ballast. Multi-tap has Super CWA ballast. Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204 237
Code Master Jr. HID Factory Sealed Luminaire Dimensions Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Pendant Ceiling Bracket 6.3 mm (4.58" ) Ø 437.4 mm (7.22") 453.9 mm (7.87") 60.5 mm 2.38" Ø.5 - NPT 25º Hub for " or " NPT Conduit 203.2 mm (8.00") 95.3 mm (3.75") 88.0 mm (7.40") 358.6 mm (4.2") 0.6 mm (4.00") 460.2 mm (8.2") Hub for " or " NPT Conduit Four Sides 443.7 mm (7.47").390º Slot Four Places 0.6 mm (4.00") 50.4 mm (5.92") 203.2 mm (8.00") 45º 4.3 mm (4.50") Ø 23.9 mm (0.94") 0.6 mm (4.00") 88.0 mm (7.40") 358.6 mm (4.2") 25.0 mm 2 (4.92" 2 ) 99.6 mm (3.92") 0.4 mm 0.4" Ø Four Holes 62.5 mm (2.46") 57.9 mm (2.28") 3.2 mm (.23") Hub for " or " NPT Conduit Four Sides 88.0 mm (7.40") 87.9 mm (3.46") 292. mm (.5") 349.3 mm (3.75") 50.8 mm (2.00") Ø Wiring Access Cover Both Sides 406.4 mm (6.00") 25 Stanchion Exit Signs Reflectors 24.3 mm (9.50") 54.9 mm (6.0") 25º 60.5 mm (4.50") Ø 406.4 mm (6.00") 428.8 mm (6.88") 74.8 mm (6.88") 25.9 mm (8.50") 235.0 mm (9.25") 304.8 mm (2.00") 298.5 mm (.75") AEXR-5R 330.2 mm (3.00") 69.9 mm (2.75") 52.4 mm (6.00") 378.5 mm (4.9") 203.2 mm (8.00") 30 Angle 203.2 mm (8.00") 429.3 mm (6.9") 396.7 mm (5.62") 42.8 mm (6.25") 258.3 mm (0.7") 08.0 mm (4.25") 45.5 mm (.79") CJEXRN Standard Dome 42.8 mm (6.25") 238 Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204
Code Master Jr. HID Factory Sealed Luminaire HPS Photometric Data Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. * Photometric data is based on a fixture with a 50-watt clear High Pressure Sodium lamp (6,000 lumen), without guard. For candlepower values of fixtures with other HPS lamps, use the following multipliers: for a 00 W (9,500 lumen) HPS lamp 0.594; for a 70 W (6,400 lumen) HPS lamp 0.394; for a 70 W (5800 lumen) HPS lamp 0.363; for a 50 W (4,000 lumen) HPS lamp 0.25; for a 35 W (2,250 lumen) HPS lamp 0.4. For candlepower values of fixture with guard, multiply by 0.95. Zone Lumens Total Luminaire Efficiency = 77.5% 0-0 32.97 CIE Type - General Diffuse REPORT NUMBER: CJL5G 0-20 9.6 Lamps: 50 W High Pressure Sodium lamp with Globe only * 20-30 33.87 30-40 349.57 Coefficients of Utilization - Zonal Cavity Method 40-50 804.55 Effective Floor Cavity Reflectance 0.20 50-60 93.29 % Ceiling Rcc 80 70 50 30 0 0 60-70 327.33 % Walls Rw 70 50 30 0 70 50 30 0 50 30 0 50 30 0 50 30 0 0 70-80 576.23 Zonal Lumen Summary 0 85 85 85 85 79 79 79 79 69 69 69 59 59 59 50 50 50 46 80-90 672.0 Zone Lumens % Lamp % Fixture 72 66 6 57 67 6 57 53 52 49 45 44 4 38 36 34 32 28 90-00 647.69 0-30 465.99 2.9 3.8 2 64 55 48 42 58 5 44 39 43 38 33 35 3 28 29 26 23 9 00-0 507.22 0-40 85.56 5. 6.6 3 57 47 39 33 52 43 36 30 36 30 26 30 25 2 24 20 7 4 0-20 22.25 0-60 283.4 7.6 22.7 4 5 40 32 26 47 37 30 24 3 25 2 25 2 7 20 6 3 0 20-30 607.8 0-90 7388.98 46.2 59.6 5 46 35 27 2 42 32 25 20 27 2 7 22 7 4 8 4 8 30-40 27.7 90-20 4376.7 27.4 35.3 6 42 3 23 8 39 29 22 7 24 8 4 20 5 6 2 9 6 40-50.62 90-30 4983.97 3. 40.2 7 39 28 20 5 36 26 9 4 2 6 2 8 3 0 4 0 7 5 50-60 0.35 90-50 502.76 3.3 40.2 8 36 25 8 3 33 23 7 2 9 4 0 6 8 3 9 6 4 60-70 0.07 90-80 503.20 3.3 40.4 9 33 23 6 3 2 5 0 8 2 9 5 0 7 2 8 6 4 70-80 0.02 80-0 2402.8 77.5 00.0 0 3 2 4 0 29 9 3 9 6 8 3 9 6 7 5 3 Zone Lumens Total Luminaire Efficiency = 66.9% REPORT NUMBER: CJL5ST 0-0 249.34 CIE Type - Direct Lamps: 50 W High Pressure Sodium lamp with 0-20 80.25 Spacing 20-30 450.35 Plane Criteria Standard Dome Reflector 30-40 495.68 0-80.44 Coefficients of Utilization - Zonal Cavity Method 40-50 920.69 90-270.44 Effective Floor Cavity Reflectance 0.20 50-60 2259.6 Diagonal.80 % Ceiling Rcc 80 70 50 30 0 0 60-70 846.4 % Walls Rw 70 50 30 0 70 50 30 0 50 30 0 50 30 0 50 30 0 0 70-80 54.69 Zonal Lumen Summary 0 80 80 80 80 78 78 78 78 74 74 74 7 7 7 68 68 68 67 80-90 25.07 Zone Lumens % Lamp % Fixture 73 69 66 64 7 68 65 63 65 63 6 62 6 59 60 59 57 56 90-00 0.70 0-30 2509.94 5.7 23.5 2 66 60 55 5 64 59 54 5 56 53 49 54 5 48 52 49 47 46 00-0 0.00 0-40 4005.62 25.0 37.4 3 59 52 46 42 58 5 46 4 49 44 4 47 43 40 45 42 39 38 0-20 0.00 0-60 885.92 5.2 76.5 4 54 45 39 35 52 45 39 34 43 38 34 4 37 33 40 36 33 3 20-30 0.00 0-90 0698.82 66.9 00.0 5 49 40 34 29 48 39 33 29 38 33 29 37 32 28 35 3 28 27 30-40 0.00 90-20 0.70 0.0 0.0 6 45 36 30 25 44 35 29 25 34 29 25 33 28 24 32 27 24 23 40-50 0.00 90-30 0.70 0.0 0.0 7 42 32 26 22 40 32 26 22 3 25 2 30 25 2 29 24 2 20 50-60 0.00 90-50 0.70 0.0 0.0 8 39 29 23 9 38 29 23 9 28 23 9 27 22 9 26 22 9 7 60-70 0.00 90-80 0.70 0.0 0.0 9 36 27 2 7 35 26 2 7 25 20 7 25 20 7 24 20 7 5 70-80 0.00 80-0 0699.52 66.9 00.0 0 34 24 9 5 33 24 9 5 23 9 5 23 8 5 22 8 5 4 Zone Lumens Total Luminaire Efficiency = 6.8% REPORT NUMBER: CJL5AN 0-0 58.3 CIE Type - Direct Lamps: 50 W High Pressure Sodium lamp with 0-20 482.43 Spacing 20-30 904.49 Plane Criteria 30 Angle Dome Reflector 30-40 63.85 0-80 2.08 Coefficients of Utilization - Zonal Cavity Method 40-50 479.08 90-270.38 Effective Floor Cavity Reflectance 0.20 50-60 630.56 Diagonal.54 % Ceiling Rcc 80 70 50 30 0 0 60-70 467.5 % Walls Rw 70 50 30 0 70 50 30 0 50 30 0 50 30 0 50 30 0 0 70-80 258.9 Zonal Lumen Summary 0 73 73 73 73 7 7 7 7 67 67 67 64 64 64 6 6 6 60 80-90 077.0 Zone Lumens % Lamp % Fixture 64 59 55 52 6 58 54 5 54 5 49 5 49 47 49 47 45 43 90-00 53.9 0-30 445.23 9.0 4.6 2 56 50 44 40 54 48 43 39 46 4 38 43 39 36 4 38 35 33 00-0 55.65 0-40 2609.08 6.3 26.4 3 5 43 36 3 49 4 36 3 39 34 30 37 33 29 35 3 28 27 0-20 52.23 0-60 578.73 35.7 57.8 4 46 37 30 25 44 36 30 25 34 29 24 32 28 24 30 26 23 22 20-30 8.33 0-90 9522.24 59.5 96.3 5 42 32 26 2 40 32 25 2 30 25 20 28 24 20 27 23 9 8 30-40 0.0 90-20 36.80 2.3 3.7 6 38 29 22 8 37 28 22 8 27 2 7 25 2 7 24 20 7 5 40-50 0.00 90-30 370.3 2.3 3.7 7 35 26 20 5 34 25 9 5 24 9 5 23 8 5 22 7 4 3 50-60 0.00 90-50 370.23 2.3 3.7 8 33 23 7 3 3 23 7 3 22 7 3 2 6 3 20 6 2 60-70 0.00 90-80 370.23 2.3 3.7 9 30 2 6 2 29 2 5 2 20 5 9 4 8 4 0 70-80 0.00 80-0 9892.48 6.8 00.0 0 28 9 4 0 27 9 4 0 8 3 0 7 3 0 7 3 0 9 Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204 239
Code Master Jr. HID Factory Sealed Luminaire PSMH Photometric Data Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. * Photometric data is based on a fixture with a 75-watt clear Pulse Start Metal Halide lamp (4,000 lumen), without guard. For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 00 W (8,500 lumen) PSMH lamp 0.607; for a 70 W (5,000 lumen) PSMH lamp 0.357. For candlepower values of fixture with guard, multiply by 0.95. Zone Lumens Total Luminaire Efficiency = 77.8% 0-0 46.64 CIE Type - General Diffuse REPORT NUMBER: CJP7G 0-20 76.99 Lamps: 75 W Pulse Start Metal Halide with Globe only * 20-30 380.0 30-40 480.30 Coefficients of Utilization - Zonal Cavity Method 40-50 042.35 Effective Floor Cavity Reflectance 0.20 50-60 252.88 % Ceiling Rcc 80 70 50 30 0 0 60-70 378.40 % Walls Rw 70 50 30 0 70 50 30 0 50 30 0 50 30 0 50 30 0 0 70-80 6.8 Zonal Lumen Summary 0 85 85 85 85 79 79 79 79 69 69 69 59 59 59 5 5 5 46 80-90 74.68 Zone Lumens % Lamp % Fixture 73 67 62 58 67 62 58 54 53 49 46 45 42 39 37 35 33 29 90-00 758.28 0-30 603.64 3.4 4.4 2 64 56 49 43 59 52 45 40 44 39 35 36 32 29 30 27 24 20 00-0 643.7 0-40 083.94 6.2 8.0 3 57 48 40 34 53 44 37 3 37 3 27 3 26 22 25 2 8 5 0-20 37.76 0-60 3379.8 9.3 24.8 4 52 4 33 27 48 38 3 25 32 26 22 26 22 8 2 7 4 2 20-30 694.24 0-90 8.07 46.3 59.6 5 47 36 28 22 43 33 26 2 28 22 8 23 8 5 9 5 2 9 30-40 27.3 90-20 4773.75 27.3 35. 6 43 32 24 9 40 29 23 8 25 9 5 20 6 2 6 3 0 7 40-50 3.4 90-30 5467.99 3.2 40.2 7 40 28 2 6 36 26 20 5 22 7 3 8 4 0 5 8 6 50-60 0.67 90-50 5498.26 3.4 40.2 8 37 26 9 4 34 24 7 3 20 5 7 2 9 3 0 7 5 60-70 0.08 90-80 5499.05 3.4 40.4 9 34 23 7 2 3 2 5 8 3 9 5 8 2 9 6 4 70-80 0.03 80-0 360.2 77.8 00.0 0 32 2 5 29 20 4 0 7 2 8 4 0 7 8 5 4 Zone Lumens Total Luminaire Efficiency = 66.4% REPORT NUMBER: CJP7ST 0-0 28.7 CIE Type - Direct Lamps: 75 W Pulse Start Metal Halide with 0-20 94.7 Spacing 20-30 567.70 Plane Criteria Standard Dome Reflector * 30-40 69.30 0-80.42 Coefficients of Utilization - Zonal Cavity Method 40-50 22.9 90-270.42 Effective Floor Cavity Reflectance 0.20 50-60 2339.53 Diagonal.76 % Ceiling Rcc 80 70 50 30 0 0 60-70 900.87 % Walls Rw 70 50 30 0 70 50 30 0 50 30 0 50 30 0 50 30 0 0 70-80 568.93 Zonal Lumen Summary 0 79 79 79 79 77 77 77 77 74 74 74 7 7 7 68 68 68 66 80-90 45.98 Zone Lumens % Lamp % Fixture 72 69 66 64 70 67 65 63 65 63 6 62 60 59 60 58 57 56 90-00.23 0-30 2763.57 5.8 23.8 2 65 60 55 5 64 58 54 5 56 52 49 54 5 48 52 49 47 46 00-0 0.00 0-40 4454.87 25.5 38.3 3 59 52 46 42 57 5 46 4 49 44 4 47 43 40 45 42 39 38 0-20 0.00 0-60 9006.3 5.5 77.5 4 54 46 39 35 52 45 39 35 43 38 34 4 37 34 40 36 33 32 20-30 0.00 0-90 622.09 66.4 00.0 5 49 40 34 29 48 40 34 29 38 33 29 37 32 29 35 3 28 27 30-40 0.00 90-20.23 0.0 0.0 6 45 36 30 25 44 35 29 25 34 29 25 33 28 25 32 28 24 23 40-50 0.00 90-30.23 0.0 0.0 7 42 32 26 22 4 32 26 22 3 26 22 30 25 22 29 25 2 20 50-60 0.00 90-50.23 0.0 0.0 8 39 29 23 9 38 29 23 9 28 23 9 27 22 9 26 22 9 8 60-70 0.00 90-80.23 0.0 0.0 9 36 27 2 7 35 26 2 7 26 2 7 25 20 7 24 20 7 6 70-80 0.00 80-0 623.32 66.4 00.0 0 34 25 9 6 33 24 9 6 24 9 5 23 8 5 22 8 5 4 Zone Lumens Total Luminaire Efficiency = 63.2% REPORT NUMBER: CJP7AN 0-0 238.28 CIE Type - Direct Lamps: 75 W Pulse Start Metal Halide with 0-20 739.68 Spacing 20-30 242.92 Plane Criteria 30 Angle Dome Reflector * 30-40 49.36 0-80 2.0 Coefficients of Utilization - Zonal Cavity Method 40-50 770.34 90-270.60 Effective Floor Cavity Reflectance 0.20 50-60 739.56 Diagonal.62 % Ceiling Rcc 80 70 50 30 0 0 60-70 484.79 % Walls Rw 70 50 30 0 70 50 30 0 50 30 0 50 30 0 50 30 0 0 70-80 97.57 Zonal Lumen Summary 0 75 75 75 75 73 73 73 73 69 69 69 65 65 65 62 62 62 6 80-90 689.02 Zone Lumens % Lamp % Fixture 66 63 59 56 64 6 58 55 58 55 53 55 53 5 52 50 49 47 90-00 254.20 0-30 2220.87 2.7 20. 2 60 53 48 44 58 52 47 43 49 45 42 47 43 4 44 42 39 38 00-0 05.48 0-40 372.23 2.2 33.6 3 54 46 40 36 52 45 40 35 43 38 34 4 37 33 39 35 32 3 0-20 35.72 0-60 7222.3 4.3 65.3 4 49 4 34 30 47 39 34 29 38 33 29 36 3 28 34 30 27 26 20-30 4.95 0-90 0593.52 60.5 95.8 5 45 36 30 25 43 35 29 25 33 28 24 32 27 24 30 26 23 22 30-40 8.72 90-20 395.4 2.3 3.6 6 4 32 26 22 40 3 26 2 30 25 2 29 24 2 27 23 20 9 40-50 6.06 90-30 437.36 2.5 4.0 7 38 29 23 9 37 28 23 9 27 22 8 26 2 8 25 2 8 6 50-60 4.53 90-50 452.3 2.6 4.0 8 35 26 2 7 34 26 20 7 25 20 6 24 9 6 23 9 6 4 60-70 2.20 90-80 459.54 2.6 4.2 9 33 24 9 5 32 24 8 5 23 8 5 22 7 4 2 7 4 3 70-80 0.68 80-0 053.05 63.2 00.0 0 3 22 7 3 30 22 7 3 2 6 3 20 6 3 9 5 3 2 240 Visit our website at www.appletonelec.com or contact us at (800) 62-506. September 204