XS8 Series. Technical Guide Submersible electropumps and motors for 8 wells

XS8 Series Technical Guide Submersible electropumps and motors for 8 wells

XS8 Series t Index Sectors of application... Technical characteristics... Table of materials and identification data... 6 Hydraulic performance field 0 Hz at 2900 rpm... 7 Operating dimensions, weights and curves...10-29 Pump section and component names... E6W 6 submersibles motors...32-3 CP8 8 submersibles motors...3-36 CP10 10 submersibles motors...37-38 Accessories... 0- Notes...-6 3

XS8 Series t Características técnicas Submersible electropumps and motors for XS8 series 8 wells The XS8 pump is a submersible pump for deep wells from 8. Can be coupled to any motor meeting the NEMA standard. Sectors of applications: Agricultural and industrial. Version XS8R, suitable for operating with sea water. >> Water supply from deep wells. >> Pressurisation and distribution in civil and industrial facilities. >> Supply for autoclaves and cisterns. >> Fire-prevention and washing systems. >> Water table control. >> Irrigation. >> Mines. Application range t XS8 at 2900 rpm Curves obtained in accordance with ISO 9906 appendix A.

XS8 Series t Technical characteristics Description t The XS8 pump is a submersible pump for deep wells from 8. Maximum sand content in water 100 g/m3. Can be coupled to any motor meeting the NEMA standard. Easy to dismantle. Great resistance to corrosion. Technical data t Flow: up to 180 m3/h. t Height: up to 0 m. t Total maximum diameter of pump (including 2 cable sheaths): 198 mm for all versions. t Maximum immersion depth of the electropumps: 0 m with E6W motors, 0 m with C8 and CP10 motor with standard configuration (with plug for shafts), on request version with mechanical seal (max. immersion depth m). t Maximum quantity of sand tolerated in water 100 g/m3. t Standard discharge nozzle: Rp for all version. t Motor power: from, to 10 kw. Manufactured on request t Different voltages and frequencies. t High temperature versions. t CP8 and CP10 for horizontal installations. t Version available XS8R in DUPLEX stainless steel. Accessories t Coupling flange. t Panels. t Descending cables. Electrical and motor specifications t E6W motor: asynchronous, three-phase, immersed in water with hermetically sealed stator. t CP8 and CP10 motors, rewindable, asynchronous, three-phase with winding in water. t Three-phase version: E6W: from 3 to 37 kw -1V, 0 Hz. CP8: from to 92 kw -1V, 0 Hz. CP10: from 92 to 10 kw -1V, 0 Hz. t Maximum deviation from rated voltage: E6W 00V ±10%, CP8, CP10 00 V +6% -10%. t PVC winding for CP8 and CP10 motors. t Horizontal operation: E6W up to 37 kw provided the coupled pump is able to exert a minimum axial thrust of 0 N throughout the operating range, CP8 and CP10 on request in all version. t Maximum number of hourly start-ups: (E6W), 1 (CP8) and 10 (CP10). t Maximum temperature of water in contact with the motor: 3 C (E6W), C (CP8 and CP10). Buid specifications t Robust and lightweight, easy to maintain and resistant to corrosion in non-aggressive atmospheres. t Stainless steel impellers and diffusers. t Stainless steel impulsion body. t Stainless steel non-return valve with buit-in spring. t Stainless steel suction support. t Stainless steel shaft. t Sliding bearings and wear rings guarantee resistance to wear and tear and asure constant operation and stability of the hydraulic performance over time. t Joint and flange with coupling dimensions based on the NEMA standard.

XS8 Series t Table of materials and identification data Table of materials of XS8 DESCRIPTION MATERIALS REF. STANDARDS EUROPE REF. STANDARDS USA Discharge body/valve body Stainless steel EN 10213--GXCrNi19-10 (1.8) A7-CF 8 Valve Stainless steel EN 10213--GXCrNi19-10 (1.8) A7-CF 8 Valve joint NBR 90 Valve spring Stainless steel EN 10088-1-XCrNiMo17-12-2 (1.01) AISI 316 Diffuser Stainless steel EN 10213--GXCrNi19-10 (1.8) A7-CF 8 Diffuser O-ring NBR 70 Impeller Stainless steel EN 10213--GXCrNi19-10 (1.8) A7-CF 8 Impeller fastening cones DUPLEX stainless steel EN 10088-1-X2CrNiMoN22--3 (1.62) A276/A790-S31803 Friction rings POM (DELRIN ) Lower suction support Stainless steel EN 10213--GXCrNi19-10 (1.8) A7-CF 8 Filter Stainless steel DIN 170-X6CrNiMoTi17-12-2 (1.71) AISI 316Ti Pump shaft Stainless steel EN 10088-1-X17CrNi16-2 (1.07) AISI 31 Joint Stainless steel EN 10088-1-X17CrNi16-2 (1.07) AISI 31 Bushing bearings EPDM + LOXAMID Shaft box support PTFE + % graphite Screws Stainless steel ISO 6-1/2 A-70 AISI 316 Cable sheaths Stainless steel EN 10088-1-XCrNi18-10 (1.1) AISI Table of materials for XS8R DESCRIPTION MATERIALS REF. STANDARDS EUROPE REF. STANDARDS USA Discharge body/valve body DUPLEX stainless steel EN 10213--GX2CrNiMoCuN-6-3-3 (1.17) Valve DUPLEX stainless steel EN 10213--GX2CrNiMoCuN-6-3-3 (1.17) Valve joint NBR 90 Valve spring Hastelloy C DIN 177-NiMo16Cr16Ti (2.610) N06 Diffuser DUPLEX stainless steel EN 10213--GX2CrNiMoCuN-6-3-3 (1.17) Diffuser O-ring NBR 70 Impeller DUPLEX stainless steel EN 10213--GX2CrNiMoCuN-6-3-3 (1.17) Impeller fastening cones DUPLEX stainless steel EN 10088-1-X2CrNiMoN22--3 (1.62) A276/A790-S31803 Friction rings POM (DELRIN ) Lower suction support DUPLEX stainless steel EN 10213--GX2CrNiMoCuN-6-3-3 (1.17) Filter Stainless steel EN 10088-1X1NiCrMoCu-20- (1.39) AISI 90L Pump shaft DUPLEX stainless steel EN 10088-1-X2CrNiMoN22--3 (1.62) A276/A790-S31803 Joint DUPLEX stainless steel EN 10088-1-X2CrNiMoN22--3 (1.62) A276/A790-S31803 Bushing bearings EPDM + LOXAMID Shaft box support PTFE + % graphite Screws DUPLEX stainless steel EN 10088-1-X2CrNiMoN22--3 (1.62) A276/A790-S31803 Cable sheaths Stainless steel EN 10088-1X1NiCrMoCu-20- (1.39) AISI 90L Identification data XS R 8 9 1 0 / 3 A 8 Motor identification Type of reduction Number of reduced stages Number of stages Nominal flow in m 3 /h Type of pump (R = DUPLEX version) EXAMPLE: XS8 910/3A - 8 8 electropump at 0 Hz, nominal flow 9 m 3 /h, 10 stages, 3 of which are reduced, coupled to an 8 CP8 motor. 6 Null = 0 Hz / 6 = 60 Hz

XS8 Series t Hydraulic perfomance field 0 Hz at 2900 rpm XS8 series Pump performance valid for liquids with a density of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s. 7

XS8 Serie XS8 t Características técnicas PÀGINA DE MOMENT EN BLANC 8

XS8 Serie XS8 t Características técnicas XS8 Series Operating dimensions, weights and curves 9

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS8 series from 1 to 7 stages PUMP P2 l/min 0 167 00 833 1217 1333 kw m 3 /h 0 10 0 73 80 XS8 01. 28.7 28 27 23 1 10.2 XS8 02/2A 7..7. 3 3 1.9 XS8 02/1A 7. 1.3 9.9 8 0 20. XS8 02 9.3 7.6 3 27 19.7 XS8 03/2A 11 7.2 72.1 69 7 27.7 XS8 03 1 86.1 83.9 80 69 1.7 XS8 0/2A 1 102.7 99.9 96 79 1 XS8 0 18. 11.6 111.7 107 91 0.7 XS8 0/3A 18. 1.6 122.2 117 97 9 XS8 0/2A 22 132.3 128.8 12 10 6.7 XS8 0 22 13. 139.8 13 11 68 0. XS8 06/2A 160.7 16.6 10 127 70.9 XS8 06 172 167.6 160 137 83 61.3 XS8 07/2A 188.6 183.6 176 18 82.3 XS8 07 199.7 19. 186 18 93 68.8 XS8 series dimensions and weights PUMP DIMENSIONS (mm) WEIGHT XS8 01-6 XS8 02/2A-6 XS8 02/1A-6 XS8 02-6 XS803/2A-6 XS8 03-6 XS8 0/2A-6 XS8 0-6 XS8 0/3A-6 XS8 0/2A-6 XS8 0-6 XS8 06/2A-6 XS8 06-6 XS8 07/2A-6 XS8 07-6 A () C (1) M Tmin (2) kg (3) 1191 13 13 1 160 161 170 18 1960 2020 2020 228 228 220 220 1631 1660 1660 168 17 178 178 1860 1860 0 0 200 200 200 200 70 81 81 8 97 103 112 119 128 13 13 1 1 16 16 t 1. Max. diameter of the electropump including 2 motor cable outputs. In the case of 1 output cable C = 198 mm with E6W motor. t 2. T min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. Without cables. t. If there is no non-return valve reduce elevation A to 110 mm and the weight to Kg. 10

XS8 Series t Operating characteristics 0 Hz at 2900 rpm XS8 series from 1 to 7 stages Correction factor Stage Load losses in the non-return valve included. Performance valid for liquids with densities of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s. 11

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS8 series from 8 to 19 stages PUMP P2 l/min 0 167 00 833 1217 1333 kw m 3 /h 0 10 0 73 80 XS8 08/2A 37 217 211. 202.8 171 96.1 XS8 08 37 228.3 222. 212.7 181 107.3 79. XS8 09/2A 37 2.8 238.3 227.8 191.2 106.8 XS8 09 260.6.2 2.3 210.6 128. 96.9 XS8 10/2A 277. 270. 260.1 221. 128. XS8 10 288.8 281.7 270.3 231.9.2 10.2 XS8 11/2A 2.6 298 286.6 2.8 13.2 XS8 11 2 316.9 9.2 296.8. 1. 116.9 XS8 12 36.6 338.3 32.8 279.8 170. 128. XS8 13 9 37.3 366.1 31.3 2.3 183.7 138.2 XS8 1 66 0. 39.7 379.1 326.6 198.9 19.9 XS8 1 66 32.8 22.2 0.9 38 210.9 18. XS8 16 7 61.6 0.3 32.1 372.2 226. 170. XS8 17 92 91.8 79.8 61.2 398.8 2.6 18 XS8 18 92 20 07.3 87. 20.8 7 19 XS8 19 92 1.2 38 17 6.3 273. 206.9 XS8 series dimensions and weights PUMP DIMENSIONS (mm) WEIGHT XS8 08/2A-6 XS8 08-6 XS8 09/2A-6 XS8 09-8 XS8 10/2A-8 XS8 10-8 XS8 11/2A-8 XS8 11-8 XS8 12-8 XS8 13-8 XS8 1-8 XS8 1-8 XS8 16-8 XS8 17-8 XS8 18-8 XS8 19-8 A () C (1) M Tmin (2) kg (3) 268 268 2820 283 2970 2970 319 319 3370 3 3780 391 7 610 7 2180 2180 2180 219 219 219 228 228 23 237 26 26 27 27 27 186 186 19 276 28 28 313 313 328 37 37 382 08 63 72 t 1. Max. diameter of the electropump including 2 motor cable outputs. In the case of 1 output cable C = 198 mm with E6W motor. C = 201, mm with CP8 motor. t 2. T min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. Without cables. t. If there is no non-return valve reduce elevation A to 110 mm and the weight to Kg. 12

XS8 Series t Operating characteristics 0 Hz at 2900 rpm XS8 series from 8 to 19 stages Load losses in the non-return valve included. Performance valid for liquids with densities of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s. 13

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS87 series from 1 to 6 stages PUMP P2 l/min 0 0 700 1167 1700 1833 kw m 3 /h 0 1 2 70 102 110 XS87 01. 28.9 26.9 2.2 20.1 11.8 9.2 XS87 02/2A 7..1 2.1 38.2 29.3 11.3 XS87 02/1A 9.3 0.8 8 3.3 3.7 17.6 XS87 02 11 7.9.1 8.7 0. 23.9 18.6 XS87 03/3A 11 66.1 63.1 7.2 3.7 16.9 XS87 03/2A 1 73. 69.7 63.3 0. 2 XS87 03/1A 1 80.1 7.3 68.3 29.8 XS87 03 18. 87. 81.7 73.9 61.8 37 29.1 XS87 0/2A 18. 102.3 96. 87. 70.3 3.6 XS87 0 22 116. 108.8 98.1 81.8 8.8 38.1 XS87 0/3A 22 12.7 117.9 106.7 8.2 1. XS87 0/2A 132.1 12. 112.9 92.1 9.3 XS87 0 1.3 13.8 122. 102.3 61 7.7 XS87 06/2A 160 10. 13.9 110.6 9.7 XS87 06/1A 166. 16.6 11. 6.8 XS87 06 37 17.2 162.8 17.1 122.7 73.1 7.2 XS87 series dimensions and weights PUMP DIMENSIONS (mm) WEIGHT XS87 01-6 XS87 02/2A-6 XS87 02/1A-6 XS87 02-6 XS87 03/3A-6 XS87 03/2A-6 XS87 03/1A-6 XS87 03-6 XS87 0/2A-6 XS87 0-6 XS87 0/3A-6 XS87 0/2A-6 XS87 0-6 XS87 06/2A-6 XS87 06/1A-6 XS87 06-6 A () C (1) M Tmin (2) kg (3) 1208 1389 11 19 1611 1666 1666 171 1893 193 210 2 2 2387 2387 17 1631 1660 168 17 17 178 178 1860 1860 0 0 200 200 200 200 2180 71 82 8 89 99 10 10 112 121 127 137 19 19 19 19 172 t 1. Max. diameter of the electropump including 2 motor cable outputs. In the case of 1 output cable C = 198 mm with E6W motor. t 2. T min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. Without cables. t. If there is no non-return valve reduce elevation A to 110 mm and the weight to Kg. 1

XS8 Series t Operating characteristics 0 Hz at 2900 rpm XS87 series from 1 to 6 stages Correction factor Stage Load losses in the non-return valve included. Performance valid for liquids with densities of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s. 1

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS87 series from 7 to 18 stages PUMP P2 l/min 0 0 700 1167 1700 1833 kw m 3 /h 0 1 2 70 102 110 XS87 07/2A 37 189 177. 160. 131 71.8 XS87 07 37 202 188.7 169.8.8 82.7 6.2 XS87 08/3A 37 210.1 197.7 178.3 13.9 76.7 XS87 08/2A 221.1 208 188.9 16.2 88.7 XS87 08 23.9 219.6 198.8 166. 100.6 79.3 XS87 09/2A 29.9 23.6 212. 17.1 99.1 XS87 09 2 263.6 26. 223 187.2 113.3 89.3 XS87 10/2A 2 278. 261.3 236.7 196 112.1 XS87 10 2 291.8 272.7 26. 206. 12.1 97. XS87 11/2A 8.6 298. 262.1 217. 1.1 XS87 11 9 322.3 1.3 272. 228. 138 108.7 XS87 12 66 32.1 329.1 297.9 29.9 11.1 119.2 XS87 13 7 381.2 36. 322.6 271 16.3 129.7 XS87 01 7 09. 382.8 36.2 290.3 17.1 137.9 XS87 1 92 0.2 11. 373 313.8 190.6 10.7 XS87 16 92 71.8 1.2 399.6 336 20.6 162.1 XS87 17 92 00.3 67.8 23.3 3. 21.7 170. XS87 18 92.1 9.7 9.6 378.8 231.2 183.3 XS87 series dimensions and weights PUMP DIMENSIONS (mm) WEIGHT XS87 07/2A-6 XS87 07-6 XS87 08/3A-6 XS87 08/2A-8 XS87 08-8 XS87 09/2A-8 XS87 09-8 XS87 10/2A-8 XS87 10-8 XS87 11/2A-8 XS87 11-8 XS87 12-8 XS87 13-8 XS87 01-8 XS87 1-8 XS87 16-8 XS87 17-8 XS87 18-8 A () C (1) M Tmin (2) kg (3) 2669 2669 2821 2836 2836 2988 78 32 32 322 372 371 396 108 60 612 76 916 2180 2180 2180 219 219 219 228 228 228 23 237 26 27 27 27 27 181 181 190 271 271 281 1 310 310 3 336 363 389 399 6 6 7 t 1. Max. diameter of the electropump including 2 motor cable outputs. In the case of 1 output cable C = 198 mm with E6W motor. C = 201, mm with CP8 motor. t 2. T min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. Without cables. t. If there is no non-return valve reduce elevation A to 110 mm and the weight to Kg. 16

XS8 Series t Operating characteristics 0 Hz at 2900 rpm XS87 series from 7 to 18 stages Load losses in the non-return valve included. Performance valid for liquids with densities of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s. 17

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS89 series from 1 to 6 stages PUMP P2 l/min 0 367 100 210 20 kw m 3 /h 0 22 60 90 129 138 XS89 01 7. 28. 27.7.3 21.6 12.3 9.8 XS89 02/2B 11 38.7 38.3 3.2 27. XS89 02/2A 1 7.7 6.6 36. 17.8 XS89 02 1 7. 0.7 3.2 2.6 19. XS89 03/2B 18. 67.2 66.1 60.8 9. XS89 03/1A 22 81.1 79 73 61.8 3 XS89 03 86 83.8 77.3 66. 39. XS89 0/2B 96 9.1 86.7 71.8 XS89 0/2A 10. 102 9.7 79.7 2. XS89 0 113.8 110.7 101. 86. 9.3 39.2 XS89 0/3A 37 128 1 116. 97. 0.8 XS89 0 37 11.9 138 126. 107. 60.9 8.7 XS89 06/3A 18. 1.8 1.6 122. 67.1 XS89 06 172.6 168.1 1.9 132.8 77.7 60. XS89 series dimensions and weights PUMP DIMENSIONS (mm) WEIGHT XS89 01-6 XS89 02/2B-6 XS89 02/2A-6 XS89 02-6 XS89 03/2B-6 XS89 03/1A-6 XS89 03-6 XS89 0/2B-6 XS89 0/2A-6 XS89 0-6 XS89 0/3A-6 XS89 0-6 XS89 06/3A-68 XS89 06-8 A () C (1) M Tmin (2) kg (3) 1237 19 11 11 171 1801 1931 2083 2083 2083 236 236 32 32 1660 17 178 178 1860 0 200 200 200 200 2180 2180 219 219 73 89 96 96 112 118 131 162 162 t 1. Max. diameter of the electropump including 2 motor cable outputs. In the case of 1 output cable C = 198 mm with E6W motor. C = 201, mm with CP8 motor. t 2. T min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. Without cables. t. If there is no non-return valve reduce elevation A to 110 mm and the weight to Kg. 18

XS8 Series t Operating characteristics 0 Hz at 2900 rpm XS89 series from 1 to 6 stages Correction factor Stage Load losses in the non-return valve ΔHv are not included. ΔHv = 0,000033*Q2 Losses = 0,2 / 0, / 0,7 m at 60 / 90 / 120 m 3 /h Performance valid for liquids with densities of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s. 19

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS89 series from 7 to 18 stages PUMP P2 l/min 0 367 100 210 20 kw m 3 /h 0 22 60 90 129 138 XS89 07/3A 2 186. 182.1 169.6 1 79.8 XS89 07 201. 196. 181.3 16.2 92. 72. XS89 08/3A 9 21.7 210.6 196 166.7 93.3 XS89 08 9 229.9 223.9 206.3 177.2 10 81.1 XS89 09/3A 66 2. 238.6 221.9 188.9 106.2 XS89 09 7 8.9 2. 233.8 119 93.2 XS89 10/3A 7 272.9 266.3 27.3 210.9 Ç119.3 XS89 10 7 287 279.6 7.6 221. 1 101. XS89 11 92 316.3 8.2 28.6.2 1 113. XS89 12 92 36.3 337.6 311. 268.1 18.8 12. XS89 13 110 37.9 36.6 338.1 291.9 17 137. XS89 1 110 03.1 393 363 312.8 18. 1.2 XS89 1 129 3.2 23. 391. 337.7 201.8 19 XS89 16 129 62.6 1 16.2 38.6 213.2 169 XS89 17 129 90.9 78. 0.9 379. 22.2 17. XS89 18 10 20.2 07.1 68. 0.2 21 189.3 XS89 series dimensions and weights PUMP DIMENSIONS (mm) WEIGHT XS89 07/3A-8 XS89 07-8 XS89 08/3A-8 XS89 08-8 XS89 09/3A-8 XS89 09-8 XS89 10/3A-8 XS89 10-8 XS89 11-8 XS89 12-8 XS89 13-10 XS89 1-10 XS89 1-10 XS89 16-10 XS89 17-10 XS89 18-10 A () C (1) M Tmin (2) kg (3) 277 281 16 16 38 338 0 0 382 00 12 276 78 7 882 16 236 236 236 236 236 236 236 236 236 236 236 236 228 23 237 237 26 27 27 2702 2702 282 282 282 282 282 288 8 8 336 33 362 362 09 18 38 8 60 613 622 671 t 1. Max. diameter of the electropump including 2 motor cable outputs. In the case of 1 output cable. C = 201, mm with CP8 motor. C = 236 mm with CP10 motor. t 2. T min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. Without cables. t. If there is no non-return valve reduce elevation A to 110 mm and the weight to Kg. 20

XS8 Series t Operating characteristics 0 Hz at 2900 rpm XS89 series from 7 to 18 stages Load losses in the non-return valve ΔHv are not included. ΔHv = 0,000033*Q2 Losses = 0,2 / 0, / 0,7 m at 60 / 90 / 120 m 3 /h Performance valid for liquids with densities of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s. 21

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS81 series from 1 to 6 stages PUMP P2 l/min 0 00 1333 2083 2800 00 kw m 3 /h 0 80 1 168 180 XS81 01 7. 27.1 2.7 21 17.1 9. 6.9 XS81 02/2B 11 1.9 38.8 31.8 22.3 XS81 02/2A 1 8.3.6 37. 28.9 13 XS81 02 1.3 9. 2 3.1 18.8 13.7 XS81 03/3A 18. 71.9 66.2. 2.6 19.3 XS81 03 22 81.7 7.6 63. 1. 28.7 20.7 XS81 0/2B 97 89.2 7.8 7. XS81 0/2A 102.6 9.1 79. 63.1 32.9 XS81 0 108. 99 8.1 68.3 37.8 27. XS81 0/3A 37 126. 116 97.9 77.1 39.3 XS81 0 37 13.2 123. 10.7 8.8 6.6 3.2 XS81 06/3A 16. 13. 121.7 97.1 0.2 XS81 06 16. 11.1 128.8 10 60 1.9 XS81 series dimensions and weights PUMP DIMENSIONS (mm) WEIGHT XS81 01-6 XS81 02/2B-6 XS81 02/2A-6 XS81 02-6 XS81 03/3A-6 XS81 03-6 XS81 0/2B-6 XS81 0/2A-6 XS81 0-6 XS81 0/3A-6 XS81 0-6 XS81 06/3A-8 XS81 06-8 A () C (1) M Tmin (2) kg (3) 1237 19 11 11 171 1801 2083 2083 2083 236 236 32 32 1660 17 178 178 1860 0 200 200 200 2180 2180 219 219 73 89 96 96 112 118 162 162 t 1. Max. diameter of the electropump including 2 motor cable outputs. In the case of 1 output cable C = 198 mm with E6W motor. C = 201, mm with CP8 motor. t 2. T min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. Without cables. t. If there is no non-return valve reduce elevation A to 110 mm and the weight to Kg. 22

XS8 Series t Operating characteristics 0 Hz at 2900 rpm XS81 series from 1 to 6 stages Correction factor Stage Load losses in the non-return valve ΔHv are not included. ΔHv = 0,000033*Q2 Losses 0,3 / 0,7 / 1,3 m at 80 / 120 / 160 m 3 /h Performance valid for liquids with densities of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s. 23

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS81 series from 7 to 18 stages PUMP P2 l/min 0 00 1333 2083 2800 00 kw m 3 /h 0 80 1 168 180 XS81 07/3A 2 183.3 168 12.6 11.3 60.2 XS81 07 2.3 17.6 19.8 122. 69.8 8.8 XS81 08/3A 210.9 193.2 16.1 131.8 70.3 XS81 08 60 220. 201.3 171.8. 80.3.9 XS81 09/3A 67 239 218.9 186 19.8 80.6 XS81 09 67 28.1 226. 193.2 17.8 90.3 62.9 XS81 10/3A 7 266.2 23.7 207.3 167. 90.7 XS81 10 7 27.3 1. 21.6 17. 100.3 69.9 XS81 11 83.2 277.8 237. 19. 112.2 76.8 XS81 12 93 332.7 3.9 9.6 212. 123 8. XS81 13 93 361.2 329.9 282.3 231.6 13.9 93.1 XS81 1 110 387.9 3.2 2.8 28 13. 98. XS81 1 110 1.3 378.3 323 26.2 11.9 10 XS81 16 1. 06 37 28. 16.3 113.9 XS81 17 1 70.9.1 367.3 0.6 173.7 119. XS81 18 10 00. 7.1 391 320.8 186.8 128.9 XS81 series dimensions and weights PUMP DIMENSIONES (mm) PESO BOMBA XS81 07/3A-8 XS81 07-8 XS81 08/3A-8 XS81 08-8 XS81 09/3A-8 XS81 09-8 XS81 10/3A-8 XS81 10-8 XS81 11-8 XS81 12-8 XS81 13-8 XS81 1-10 XS81 1-10 XS81 16-10 XS81 17-10 XS81 18-10 A () C (1) M Tmin (2) kg (3) 277 277 2966 16 38 38 0 0 3712 00 16 276 28 7 882 16 236 236 236 236 236 236 236 236 236 236 228 228 23 237 26 26 261 27 27 2702 2702 282 282 2982 281.7 81.72 296.9 7.9 33.1 33.1 361. 361. 383.6 17.8 27 7.3 6. 612.7 622 670.2 t 1. Max. diameter of the electropump including 2 motor cable outputs. In the case of 1 output cable. C = 201, mm with CP8 motor. C = 236 mm with CP10 motor. t 2. T min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. Without cables. t. If there is no non-return valve reduce elevation A to 110 mm and the weight to Kg. 2

XS8 Series t Operating characteristics 0 Hz at 2900 rpm XS81 series from 7 to 18 stages Load losses in the non-return valve ΔHv are not included. ΔHv = 0,000033*Q2 Losses 0,3 / 0,7 / 1,3 m at 80 / 120 / 160 m 3 /h Performance valid for liquids with densities of ρ = 1,0 kg/dm 3 and kinematic viscosity of υ = 1 mm 2 /s.

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS8 series PUMP XS8 01 XS8 02/2A XS8 02/1A XS8 02 XS8 03/2A XS8 03 XS8 0/2A XS8 0 XS8 0/3A XS8 0/2A XS8 0 XS8 06/2A XS8 06 XS8 07/2A XS8 0 XS8 08/2A XS8 08 XS8 09/2A XS8 09 XS8 10/2A XS8 10 XS8 11/2A XS8 11 XS8 12 XS8 13 XS8 1 XS8 1 XS8 16 XS8 17 XS8 18 XS8 19 MAX. POWER DIMENSIONS (mm) ABSORBED BY PUMP at 2900 min -1 (kw) L (3) I Umin (2).6 6. 7.7 9 10.8 13.3 1.1 17.6 18.3 20.8 22 23.9 26. 28.3.8 32.7 3.2 37.1 39.6 1..9 8. 2.8 7.2 61.6 66 70. 7.8 79.2 83.6 3 60 60 60 9 9 7 7 86 86 86 113 113 1270 1270 10 10 167 167 1810 19 2080 221 0 28 2620 27 WEIGHT kg (3) 26.6 3.2 3.2 3.2 3.9 3.9 2. 2. 61.2 61.2 61.2 69.8 69.8 78. 78. 87.1 87.1 9.8 9.1 103.8 103.8 112. 112. 121.1 129.7 138. 17 1.7 16.3 173 181.6 XS8 series 6 and 8 motor coupling MOTOR 6 (NEMA) 8 (NEMA) 182 182 111 12. 13. 18 DIMENSIONS (mm) N k d z b E H7 R X 17 17 76.16 127 73 101.3 2 0 t 1. Max. pump diameter including 1 motor cable output. t 2. U min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. In the absence of an non-return valve reduce elevation L to 110 mm and the weight to Kg. 26

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS87 series PUMP XS87 01 XS87 02/2A XS87 02/1A XS87 02 XS87 03/3A XS87 03/2A XS87 03/1A XS87 03 XS87 0/2A XS87 0 XS87 0/3A XS87 0/2A XS87 0 XS87 06/2A XS87 06/1A XS87 06 XS87 07/2A XS87 07 XS87 08/3A XS87 08/2A XS87 08 XS87 09/2A XS87 09 XS87 10/2A XS87 10 XS87 11/2A XS87 11 XS87 12 XS87 13 XS87 1 XS87 1 XS87 16 XS87 17 XS87 18 MAX POWER DIMENSIONS (mm) ABSORBED BY PUMP at 2900 min -1 (kw) L (3) I Umin (2).3 7.6 9 10. 11.3 12.7 1.2 1.6 17.7 20.6 21. 22.9.8 28 29..9 33.2 36.1 36.9 38.3 1.2 3. 6. 8.6 1. 3.8 6.7 61.8 67 72.1 77.3 82. 87.6 92.7 32 9 9 9 66 66 66 66 798 798 90 90 90 1102 1102 1102 1 1 6 6 6 18 18 1710 1710 1862 1862 201 2166 2318 270 2622 277 2926 6 WEIGHT kg (3) 26.9 36.2 36.2 36.2.....6.6 63.9 63.9 63.9 73.1 73.1 73.1 82.3 82.3 91. 90.9 90.9 100.1 100.1 109. 109. 118.6 118.6 127.8 137 16.3 1. 16.7 17 183.2 XS87 series 6, 8 and 10 motor coupling MOTOR 6 (NEMA) 8 (NEMA) 10 182 182 232 111 12. 190. 13. 18 M16 DIMENSIONS (mm) N k d z b E H7 R X 17 17 21 76.16 127 127 73 101.3 101.3 2 0 8 t 1. Max. pump diameter including 1 motor cable output. t 2. U min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. In the absence of an non-return valve reduce elevation L to 110 mm and the weight to Kg. 27

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS89 series PUMP XS89 01 XS89 02/2B XS89 02/2A XS89 02 XS89 03/2B XS89 03/1A XS89 03 XS89 0/2B XS89 0/2A XS89 0 XS89 0/3A XS89 0 XS89 06/3A XS89 06 XS89 07/3A XS89 07 XS89 08/3A XS89 08 XS89 09/3A XS89 09 XS89 10/3A XS89 10 XS89 11 XS89 12 XS89 13 XS89 1 XS89 1 XS89 16 XS89 17 XS89 18 MAX POWER DIMENSIONS (mm) ABSOBED BY PUMP at 2900 min -1 (kw) L (3) I Umin (2) 7.7 10 12.8 1.2 17. 21. 22. 2.6 27. 29.8 33.7 37.2 1.1.6 8.6 2.1 6 9. 63. 67 70.9 7. 81.8 89.3 96.7 10.2 111.6 119 126. 133.9 32 9 9 9 66 66 66 798 798 798 90 90 1102 1102 1 1 6 6 18 18 1710 1710 1862 201 2166 2318 270 2622 277 2926 6 6 6 6 6 6 WEIGHT kg (3) 26.9 36.2 36.2 36.2....6.6.6 63.9 63.9 73.1 73.1 81.7 81.7 90.9 90.9 100.1 100.1 109. 109. 118.6 127.8 137 16.3 1. 16.7 17 183.2 XS89 series 6, 8 and 10 motor coupling MOTOR 6 (NEMA) 8 (NEMA) 10 182 182 232 111 12. 190. 13. 18 M16 DIMENSIONS (mm) N k d z b E H7 R X 17 17 21 76.16 127 127 73 101.3 101.3 2 0 8 t 1. Max. pump diameter including 1 motor cable output. t 2. U min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. In the absence of an non-return valve reduce elevation L to 110 mm and the weight to Kg. 28

XS8 Series t Operating characteristics 0 Hz, dimensions and weights XS81 series PUMP XS81 01 XS81 02/2B XS81 02/2A XS81 02 XS81 03/3A XS81 03 XS81 0/2B XS81 0/2A XS81 0 XS81 0/3A XS81 0 XS81 09/3A XS81 06 XS81 07/3A XS81 07 XS81 08/3A XS81 08 XS81 09/3A XS81 09 XS81 10/3A XS81 10 XS81 11 XS81 12 XS81 13 XS81 1 XS81 1 XS81 16 XS81 17 XS81 18 MAX POWER DIMENSIONS (mm) ABSORBED BY PUMP at 2900 min -1 (kw) L (3) I Umin (2) 7. 10 12.2 1.8 18.1 22 2.3 26. 29 32. 36.3 39.7 3. 7 0.8.2 8 61. 6.3 68.7 72. 79.8 87 9.3 101. 108.8 116 123.3 1. 32 9 9 9 66 66 798 798 798 90 90 1102 1102 1 1 6 6 18 18 1710 1710 1862 201 2166 2318 270 2622 277 2926 6 6 6 6 6 6 WEIGHT kg (3) 26.9 36.2 36.2 36.2...6.6.6 63.9 63.9 73.1 73.1 81.7 81.7 90.9 90.9 100.1 100.1 109. 109. 118.6 127.8 137 16.3 1. 16.7 17 183.2 XS81 series 6, 8 and 10 motor coupling MOTOR 6 (NEMA) 8 (NEMA) 10 182 182 232 111 12. 190. 13. 18 M16 DIMENSIONS (mm) N k d z b E H7 R X 17 17 21 76.16 127 127 73 101.3 101.3 2 0 8 t 1. Max. pump diameter including 1 motor cable output. t 2. U min. OK for max. flow speed,2 m/s. If this speed is higher contact the sales network. t 3. In the absence of an non-return valve reduce elevation L to 110 mm and the weight to Kg. 29

XS8 Series t Pump section and component names XS8 Series REF. 1 2 3 6 7 8 9 10 11 12 13 1 1 16 17 18 19 20 DESCRIPTION Stages body Lower suction support Impeller body Valve body Bushing bearing Impeller Friction ring Shaft Joint Impeller fastening cone Shaft box support Non-return valve Valve seating Valve spring Suction filter Motor cable Cable protection OR joint Adaptor for 10 motor Adjustment plate

XS8 Serie XS8 t Características técnicas XS8 Series 6, 8 and 10 submersible motors E6W, CP8 and CP10 31

XS8 Series t Technical characteristics for E6W 6 submersible motors Description t Motors immersed in water. t The choice of construction materials guarantees optimum operating performance, superior quality, reliability and easy installation. Electrical and motor specifications t Outer casing made of stainless steel. t Projecting shaft element and coupling elevations based on the NEMA guidelines. t Rewindable stator with PVC -insulated rewinding thread. t Y insulation class motor. t Protection class: IP68. t Compensation bellows for expanding of liquid inside. t Axial load supported by Kingsbury type segmented bearing. t Mechanical seal with anti-sand protection. t Maximum immersion depth: m. t Maximum number of start-ups per hour distributed on a fairy basis: 1. t Maximum deviation allowed for line voltage compared to nominal voltage: ±10%. t Maximum water temperature: C. t Max. temperature is taken for motors operating in a facility able to guarantee a water flow around the motor casing of at least 0,2 m/s (0, m/s at 37 kw). t Axial thrust: 16000 N from at 22 kw; 000 N from 26 at 37 kw. t Power cable for use in contact with drinking water. Versions: Three-phase: from at 37 kw -1 V, 0 Hz. t Motors fitted with double cable output for star-triangle start-up, on request. t Horizontal operation in all versions, provided the axial thrust generated by the impellers always acts in the pump to motor direction. t Screws included. Executions on request t Mechanical seal made of silica carbide. t pole motors. t Special voltages. t Wound for high temperatures. t Applications with inverter. t PT 100 temperature sensor. Identification data E6W T 110 0 /A Version = 0 Hz / 6 = 60 Hz Rated voltage Rated power in kw x 10 M = Single-phase / T = Three-phase Series EXAMPLE: E6W110T0/A E6W motor; Nominal power 11 kw. Three-phase; Nominal voltage 00 V. 0 Hz. Version /A 32

XS8 Series t Operating characteristics 0 Hz, dimensions and weights E6W series motors dimensions and weights MOTOR P2 DIMENSIONS (mm) WEIGHTS E6WT 0-0 E6WT -0 E6WT 7-0 E6WT 93-0 E6WT 110-0 E6WT 1-0 E6WT 10-0 E6WT 18-0 E6WT 220-0 E6WT 260-0 E6WT 0-0 E6WT 370-0 kw HP L kg. 7. 9.3 11 13 1 18. 22 26 37. 7. 10 12. 1 17. 20 3 0 0 83 613 63 683 723 763 833 903 93 1071 111 11 38 2 6 0 8 66 7 77 86 9 108 33

XS8 Series t Operating characteristics 0 Hz three-phase motors E6W series three-phase motors MOTOR P2 RATED OPERATING DIRECT MAX. OF CABLE VOLTAGE CHARACTERISTICS RATED CURRENT START-UP THREE-PHASE kw HP V A rpm % cos Ts/Tn* Is/In WATER TEMPERATURE Ncxsez. (mm 2 ) C DOL Y/D L(m) E6WT 0-0. 1 9.62 8.9 28 2880 69. 72.2 0.91 0.86 0.96 1.1 3.6.27 E6WT -0. 7. 1 12.7 12.3 280 288 7 7.7 0.89 0.83 1.28 1..27.82 E6WT 7-0 7. 10 1 17.1 16. 28 286 7. 7.7 0.9 0.8 1.18 1.3.07.6 E6WT 93-0 9.3 12. 1 20. 19.8 283 2870 76.6 77.6 0.89 0.83 1.1 1.82.7.16 E6WT 110-0 11 1 1 2.8 2 28 2860 76.3 77. 0.89 0.82 1.36 1.6.27.81 E6WT 1-0 13 17. 1 28.7 27. 2820 2860 76.6 77.9 0.9 0.8 1.37 1.66.38.99 E6WT 10-0 1 20 1 32. 31.1 28 286 76.1 80.3 0.89 0.8 1.62 1.96.83.8 E6WT 18-0 18. 1 0 39.6 283 286 80.3 80. 0.87 0.81 1.8 2.17.10.63 6 E6WT 220-0 22 1 8.. 283 287 78.7 81.8 0.88 0.82 1.0 1.26.9.3 6 E6WT 260-0 26 3 1 6.2 3. 286 2890 80.2 81.9 0.88 0.83 1.03 1.2.7. 6 E6WT 0-0 0 1 6.7 61. 28 288 80. 82.1 0.88 0.83 1.08 1.3.9.28 10 E6WT 370-0 37 0 1 81.7 78.8 280 287 78.6 79.8 0.88 0.82 1 1.2.2.81 20 10 3

XS8 Series t Technical characteristics for CP8 8 submersible motors Description t Asynchronous, three-phase motor immersed in water, with rotor in short circuit and wound with special water-repellent thread. t The choice of the component materials guarantees optimum operating performance, reliability and ease of installation. Electrical and motor specifications t Projecting shaft element and coupling elevations based on the NEMA guidelines. t Rewindable stator with PVC insulation. t Protection class: IP68. t Filling liquid. t The motors are filled with water and 1% of non-toxic anti-freeze liquid. In addition to having rust suppressing properties, the liquid improves lubrication and protects the motor at low temperatures. t Large compensation bellows for expansion of the liquid inside. The motor also has a discharge valve allowing liquid to exit in the event of an abnormal increase in temperature. t Axial load supported by oscillating segmented bearing. t To prevent the exchange of fluids between the exterior and interior of the motor, all standard motors have two plugs placed opposite each other. t Motors with mechanical seals available on request. t Maximum immersion depth: 0 m for standard motors (plug for shafts), m with motors on request (with mechanical seals). t Maximum number of start-ups per hour distributed on a fairy basis: 10 start-ups/h. t Maximum deviation allowed for line voltage with respect to rated voltage (00V): +6%-10%. t Axial thrust supported 0.000 N. t Three-phase versions available CP8 kw at 92 kw 00V, and on request for other voltages. t The rewinding thread is made of PVC. t The motors are supplied with three m pieces of single-pole, H07BBF type cable, with a circular cross-section. t Room temperature: C, the motors should operate with a water flow around their frameworks of at least 0,20 m/s. Executions on request t pole motors. t Special voltages up to V. t Horizontal installation. t Applications with inverter. t Wound for high temperatures. t Different materials. Accessories t Panels. t Descending cables. 3

XS8 Series t Operating characteristics 0 Hz, dimensions and weights CP8 series motors dimensions and weights MOTOR INPUT POWER DIMENSIONS (mm) WEIGHT kw HP L kg CP8 0 0 101 1 CP8 0 37 0 110 162 CP8 60 60 119 180 CP8 70 2 70 128 CP8 7 7 13 206 CP8 80 9 80 137 217 CP8 90 66 90 16 CP8 100 7 100 1 2 CP8 1 92 1 17 290 CP8 series motors operating characteristics 0 Hz MOTOR P2 RATED OPERATING DIRECT MAX. OF CABLE VOLTAGE CHARACTERISTICS RATED CURRENT START-UP TRIFÁSICO kw HP V A rpm % cos Ca/Cn Ia/In WATER TEMPERATURE C Ncxsez. (mm 2 ) L(m) CP8 0 0 1 6 9 290 2900 83 83 0.8 0.8 1.2 1.09.67.7 3x10 3x10 CP8 0 37 0 1 82. 76 2860 2860 82 82 0.8 0.8 1.16 1.17.62.6 3x10 3x10 CP8 60 60 1 9 8 2870 2870 8 8 0.86 0.86 0.9 0.99.10.23 3x16 3x16 CP8 70 2 70 1 112 10 286 286 82 82. 0.8 0.8 1.1 1.16.83.8 3x16 3x16 CP8 7 7 1 118 110 280 280 82 82. 0.86 0.86 1.26 1.27.9.8 3x16 3x16 CP8 80 9 80 1 1 11 287 2870 8 83. 0.86 0.8 1.21 1.20..1 3x16 3x16 CP8 90 66 90 1 11 1 2870 2870 8 8 0.86 0.8 1.08 1.16.6.7 3x16 3x16 CP8 100 7 100 1 16 1 287 2880 83 83 0.86 0.8 1.03 1.10.61.71 3x 3x CP8 1 92 1 1 176 288 288 8 8. 0.86 0.8 0.93 0.97.2.32 3x3 3x3 36

XS8 Series t Technical characteristics for CP10 10 submersible motors Description t Asynchronous, three-phase motor immersed in water, with rotor in short circuit and wound with special water-repellent thread. t The choice of the component materials guarantees optimum operating performance, reliability and ease of installation. Electrical and motor specifications t Rewindable stator with PVC insulation. t Protection class IP8. t Filling liquid. t The motors are filled with water and 1% of non-toxic anti-freeze liquid. In addition to having rust suppressing properties, the liquid improves lubrication and protects the motor at low temperatures. t Large compensation bellows for expansion of the liquid inside. The motor also has a discharge valve allowing liquid to exit in the event of an abnormal increase in temperature. t Axial load supported by oscillating segmented bearings. t To prevent the exchange of fluids between the exterior and interior of the motor, all standard motors have two plugs placed opposite each other. t Motors with mechanical seals available on request. t Maximum immersion depth: 0 m for standard motors (plugs for shafts), m with motors on rquest (with mechanical seals). t Maximum number of start-ups per hour distributed on a fairy basis: 8 start-ups/h. t Maximum deviation allowed for line voltage with respect to rated voltage (00V): +6%-10%. t Axial thrust supported 6.000 N. t Version available: Three-phase CP10 92 kw at 10 Kw 00 V and on request for different voltages. t The rewinding thread is made of PVC. t The motors are supplied with three m pieces of single-pole, H07BBF type cable, with a circular cross-section. t Room temperature: C, the motors should operate with a water flow around their frameworks of at least 0,20 m/s. Executions on request t pole motors. t Special voltages up to V. t Horizontal installation. t Applications with inverter. t Wound for high temperatures. t Different materials. Accessories t Panels. t Descending cables. 37

XS8 Series t Operating characteristics 0 Hz, dimensions and weights CP10 motors dimensions and weights MOTOR P2 DIMENSIONS (mm) WEIGHT kw HP L kg CP10 1 92 1 162 360 CP10 10 110 10 1702 01 CP10 17 129 17 182 8 CP10 10 1982 87 CP10 series motors operating characteristics 0 Hz MOTOR P2 REATED OPERATING DIRECT MAX. OF CABLE VOLTAGE CHARACTERISSTICS RATED CURRENT START-UP THREE-PHASE kw HP V A rpm % cos Ca/Cn Ia/In WATER TEMPERATURE C Ncxsez. (mm 2 ) L(m) CP10 1 92 1 1 190 177 2910 2910 8 8 0.8 0.8 1.02 1.06.3.31 3x3 3x3 CP10 10 110 10 1 237 216 290 290 86. 86. 0.8 0.8 1.1 1..63.7 3X0 3X0 CP10 17 129 17 1 27 0 291 291 86 86. 0.83 0.83 1.7 1..8.78 3X70 3X70 CP10 10 1 312 292 29 29 8 8. 0.8 0.8 1.6 1.9.82.6 3X70 3X70 38

XS8 Series Accessories 39

XS8 Series t Accessories XS8 series ISO threaded flanges PUMP XS8 XS87 XS89 XS81 THREADING DIMENSIONS (mm) ISO 7-1 * Flange in accordance with EN 1092-1 G DN PN ø D ø d ø K Z ø L C L1 I2 TIPO R 1 1 1 10 10 10 10 16 0 63 10 16 0 63 0 270 29 28 0 3 188 188 218 218 210 220 20 20 0 280 8 8 8 8 8 8 18 26 22 26 33 22 26 3 22 28 36 108 168 188 28 31 33 A C C B D D * Flanges in accordance with ASME B16. available on request. 0

XS8 Series t Accessories XS8 series support flanges NOMINAL PIPE Ø DN 6 R2 1/2 80 R 3 100 R 1 R 10 R 6 17 R 7 R 8 0 R 10 SUPPORT FLANGES PIPE WEIGHT DIMENSIONS (mm) Pmax (1) Clamped Threaded Water A B C E VITE kg kg/m kg/m kg/m 0 1 600 1 M16X90 10 6.7 8 3.3 80 1 600 180 M20X70 0 8. 10. 80 1 600 180 M20X110 0 20. 1 7.9 100 20 600 260 M2X90 70 27. 18. 12.3 100 20 600 260 M2X1 70 33 22 17.6 120 800 360 MX110 970 27. 2 120 800 360 MX10 970 33 3 31. 120 800 360 MX220 970 8 8 9 1) Maximum weight admitted. NOTE: 2 sets of support collars are necessary for the installation. 1

XS8 Series t Accessories XS8 series water jackets CASINGS FILTER SUPPORT REFRIGERATION REFRIGERATION REFRIGERATION KIT KIT KIT D x L D x L1 D D2x800 D2x D2 D2x900 D2x D2 D2x D2x D2 D2x10 D2x D2 D2x100 D2x D2 6 D2x170 D6x800 D2x D2 D6 D6x900 D6 D6x D6 D6x10 D6 D6x100 D6 D6x170 D6 D6x10 D6 D6x100 D6 D6x170 D6 D6x0 D6 8 D6x20 D28x10 D6 D28 D28x100 D28 D28x170 D28 D28x0 D28 D28x00 D28 D28x170 D28 10 D3x170 D3x0 D3x38 D3x38 D3 D3 D3x20 D3x38 D3 2

XS8 Series t Accessories XS8 series motor coupling water jacket table for CP8 motors MOTOR PUMP STAGES CASING REFRIGERATION FILTER REFRIGERATION SUPPORT REFRIGERATION KIT KIT KIT CP8 XS8 09 XS8 10/2A XS8 10 XS8 1A XS8 11 XS8 12 XS8 13 XS8 1 XS8 1 XS8 16 XS8 17 XS8 18 XS8 19 XS87 08/2A XS87 08 XS87 09/2A XS87 09 XS87 10/2A XS87 10 XS87 11/2A XS87 11 XS87 12 XS87 13 XS87 1 XS87 1 XS87 16 XS87 17 XS89 06/3A XS89 06 XS89 07/3A XS89 07 XS89 08/3A XS89 08 XS89 09/3A XS89 09 XS89 10/3A XS89 10 XS89 11 XS89 12 XS81 03/3A XS81 06 XS81 07/3A XS81 07 XS81 08/3A XS81 08 XS81 09/3A XS81 09 XS81 10/3A XS81 10 XS81 11 XS81 12 9 10 10 11 11 12 13 1 1 16 17 18 19 8 8 9 9 10 10 11 11 12 13 1 1 16 17 6 6 7 7 8 8 9 9 10 10 11 12 6 6 7 7 8 8 9 9 10 10 11 12 D6x100 D6x100 D6x100 D6x100 D6x100 D6x100 D6x170 D6x170 D6x170 D6x170 D6x0 D6x0 D6x0 D6x100 D6x100 D6x100 D6x100 D6x100 D6x100 D6x100 D6x170 D6x170 D6x170 D6x170 D6x0 D6x0 D6x0 D28x100 D28x100 D28x100 D28x100 D28x170 D28x170 D28x170 D28x170 D28x170 D28x170 D28x0 D28x0 D28x100 D28x100 D28x100 D28x100 D28x100 D28x170 D28x170 D28x170 D28x170 D28x170 D28x0 D28x0 D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D6 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ D28 3PZ Horizontal installation not possible. The supports must be used solely for fastening the electropump vertically. 3

XS8 Series t Accessories XS8 series motor coupling water jacket table for CP10 motors MOTOR PUMP STAGES CASING REFRIGERATION FILTER REFRIGERATION SUPPORT REFRIGERATION KIT KIT KIT CP10 XS87 18 XS89 13 XS89 1 XS89 1 XS89 16 XS89 17 XS89 18 XS81 13 XS81 1 XS81 1 XS81 16 XS81 17 XS81 18 18 13 1 1 16 17 18 13 1 1 16 17 18 D28x170 D3x0 D3x0 D3x20 D3x20 D3x20 D3x20 D3x0 D3x0 D3x0 D3x20 D3x20 D3x20 D3x38 D3x38 D3x38 D3x38 D3x38 D3x38 D3x38 D3x38 D3x38 D3x38 D3x38 D3x38 D28 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ D3 3PZ Horizontal installation not possible. The supports must be used solely for fastening the electropump vertically.

XS8 Series t Notes

XS8 Series t Notes 6

XS8 Serie XS8 t Características técnicas 7

XS8 Serie XS8 t Características técnicas COLLECTING MAKING POTABLE PRESSURISING RECIRCULATING REUSING EVACUATING CLEANING ESPA GROUP supporting you with all the technology, products and service you need. Flet 00EN 09/08 8