Faceplates Series Model 7A/10IS/12IS/13IS Page 1 of 13
Features Left and right ear applications Integrated On/Off switch in the Faceplate assembly (FP 7A) FP 10IS, 12IS & 13IS are available for the Insert Socket Module CS 73/74 Contents 1. History Revision 3 2. Mechanical Specifications 4 3. Material Specifications 4 4. Environmental Conditions 4 5. Recommended Process Parameters 4 6. Mechanical Dimensions 5 7. Plastic Colors 12 8. Product Specification Form 13 Sonion reserves the right to make changes at any time to improve reliability, function or design, in order to provide the best product possible. Page 2 of 13
1. History Revision Revision Number/Date Change from last revision 10 / May 02 History Revision added. FP 6A and 8A have been removed 11 / May 08 Operational temperature and humidity removed. New data sheet design. New lay-out. MT1010.A (07/08) 012/JUL-22-2009 013/FEB-14-2011 014/JUL-13-2011 No technical updates No technical updates FP 7A No. 01 update of dimensions and design. FP 7A No. 02 discontinued. Storage humidity added. 015/2014-01-10 Updated design and new RoHS logo directive (2011/65/EU) Page 3 of 13
2. Mechanical Specifications Battery size FP 7A FP 10IS 10A 10A FP 12IS 312 FP 13IS 13 FP 10IS/12IS/13IS battery door marked with red + sign Battery Door operational lifetime 3. Material Specifications All materials comply with RoHS directive (2011/65/EU) Metal parts Battery spring FP 7A FP 10IS, 12IS, 13IS FP 10IS, 12IS, 13IS Min. 2,000 cycles Open/Close Spring steel, gold plated Stainless steel, nickel/gold plated Hinge pin Stainless steel Plastic parts Glueable thermoplastic material Lubricant, glue / seal, and paint specifications are proprietary information. 4. Environmental Conditions Storage temperature Storage humidity -40 to +60 C 10 to 95% RH 5. Recommended Process Parameters Gluing Types of glue Cyanoacrylates (non-blooming), i.e. Loctite 401, 408, 460 and Sicomet 50, 63, 77 Non-blooming types must be used to ensure that residuals from the curing process do not degrade the component. Cleaning Cleaning solvents Aqua wash (Alpha 2110), Benzine Do not use alcohol-based solvents Page 4 of 13
6. Mechanical Dimensions Note: The standard measurement tolerance on the drawings is ±0.05 mm/[0.002 ]. Tolerances which differ from this value will be indicated on the drawings. FP 7A No. 01 Page 5 of 13
FP 10IS 45 ø2.24 [ø.088] 4.88 [0.192] 1.55 [.061] 1.50 [0.059] ø2.36 [ø.09] 4.13 [.162] 19.15 [.754] 6.35 [0] 3.92 [1.54] R.38 [R.015] 2.71 [.106] 6.17 [.243] 3.98 [.156] 3.61 [.142] 6.99 [0.275] R20.47 [R.806] ø44.32 [ø1.745] Page 6 of 13
FP 12IS ø2.24 [ø0.088] 5.44 [0.214] 188 [0.74] ø2.36 [ø0.093] 45 4.95 [.195] 3.61 [0.142] 4.90 [0.193] R1.57 [R.062] 2.50 [0.098] 5.11 [0.201] 6.17 [0.243] 19.15 [.754] 6.35 [0] 1.91 [0.75] 6.35 [0] ø44.32 [ø1.745] R20.47 [R0.806] Page 7 of 13
FP 13IS ø2.24 [ø0.088] 1.88 [0.074] ø2.36 [ø0.093] 45 4.95 [0.195] 5.49 [0.216] 22.00 [0.866] 6.35 [0] R1.57 [R0.062] 2.50 [0.098] 6.17 [0.243] 5.11 [0.201] 3.61 [0.142] 1.91 [0.075] 6.35 [0] ø50.80 [ø2.000] R23.70 [R0.933] FP 10IS/12IS/13IS Cross-section of faceplate showing cavity for the Insert Socket Module CS 73/74 Page 8 of 13
FP 10IS Battery Doors for the Insert Socket Module CS 73 (available in left and right) 1.09 3.20 [0.126] ø5.83 [ø0.230].23 [0.009] 1.85 [0.073] R3.40 [R0.134] 3.05 [0.120].51.25 3.58 [0.141] FP 10IS Battery Doors for the Insert Socket Module CS 74 (available in left and right) 1.09 3.20 [0.126] ø5.83 [ø0.230] 0.36 [0.014] 1.85 [0.073] R3.40 [R0.134] 2.03 [0.080] 0.51 3.58 [0.141] Page 9 of 13
FP 12IS Battery Doors for Insert Socket Module CS 73 (available in left and right) ø7.79 [0.307] 0.23 [0.009] 0.23 [0.009] R4.42 [R0.17] ø7.79 [0.307] 3.05 [0.120] 3.05 [0.120] 0.51 0.51 R4.42 [R0.17] [0.101] [0.101] FP 12IS Battery Doors for the Insert Socket Module CS 74 (available in left and right) Ø7.79 [Ø0.307] 0.36 [0.014] R4.42 [R0.174] Ø7.79 [Ø0.307] 2.03 [0.080] 2.03 [0.080] 0.36 [0.014] 0.51 0.51 R4.42 [R0.174] Page 10 of 13
FP 13IS Battery Doors for the Insert Socket Module CS 73 (available in left and right) 0.94 [0.037] ø7.79 [ø0.307] 5.38 [0.212] 1.17 [0.046] R4.42 [R0.174] 3.05 [0.120] 0.51 FP 13IS Battery Doors for the Insert Socket Module CS 74 (available in left and right) 0.94 [0.037] ø7.79 [ø0.307] 5.38 [0.212] 0.94 [0.037] 2.03 [0.080] 2.03 [0.080] 1.30 [0.051] R4.42 [R0.174] 1.30 [0.051] 0.51 0.51 R4.42 [R0.174] ø7.79 [ø0.307] 5.38 [0.212] Page 11 of 13
7. Plastic Colors For FP 7A please refer to the series 300 included in the Sonion Plastic Color Assortment binder. For FP 10IS, 12IS and 13IS the following colors are available: Pink 05 (closest Sonion equivalent color no. is 348) Tan 02 (closest Sonion equivalent color no. is 119) Light Brown 07 (closest Sonion equivalent color no. is 233) Dark Brown 04 (closest Sonion equivalent color no. is 180) Page 12 of 13
8. Product Specification Form Name Company Customer Part No. Parameters Look at Page Enter your choices Guidelines Model 5-8 Please enter FP 7A No. 01, 10IS, 12IS or 13IS Battery Door FP 10IS/ 12IS/13IS 8-11 Please enter either left or right Please enter 3 grooves - to be used with the CS 73 Please enter 4 grooves - to be used with the CS 74 Plastic Color 12 For FP 7A please refer to the series 300 included in the Sonion Plastic Color Assortment binder. For FP 10IS, 12IS and 13IS please see below: Pink 05 (closest Sonion equivalent color no. is 348) Tan 02 (closest Sonion equivalent color no. is 119) Light Brown 07 (closest Sonion equivalent color no. is 233) Dark Brown 04 (closest Sonion equivalent color no. is 180) Faceplate 10IS/12IS/13IS with the CS 73/74 pre-mounted Parameters Enter your choices Guidelines Faceplate Model Please enter FP 10IS, 12IS or 13IS Insert Socket Module Type Please enter CS 73 or CS 74 Page 13 of 13