Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

Similar documents
4/2- and 4/3-way shut-off valve

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.

Application Examples of Air-piloted Valves

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:

4/2 and 4/3 Solenoid Directional Valve, ISO Size 03

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation

Electrically controlled directional control poppet valve type UREZ6

Directional Valve Size 04 WL 4.04

Directional Valve Size 06 WL 4.06

Kit Description. Adapter Kit for Johnson Controls 1 / 2 to 2 VG7xxxxx, VB-3754, VB-3974, VB-4322, and VB-4324 Two- and Three-Way Globe Valves

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006

3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94

Solenoid Pilot Operated Directional Control Valve

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

Press control block PSB Type approved according to DIN EN 693

Proportional directional valves

Kit Description. to 3 / 4. VG7xxxxT Two- and Three-Way Globe Valves. VG7xxxxS, VG7xxxxT, and VTM Twoand Three-way Globe Valves / 4

Directional Valve. NG 04 WL4.04 Installation dimensions ISO 4401/ DIN A4

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

6/2 way directional valve type 6/2UREM6 and 6/2URMM6

Solenoid Pilot Operated Directional Control Valve

SINEAX C 402 Alarm unit

4/3, 4/2 and 3/2 directional valve with wet-pin DC solenoids

Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay

SOLENOID VALVES / DIRECTIONAL CONTROL VALVES

Mechanical Fail-Safe Damper Actuator NFA

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009

SOLENOID VALVES / DIRECTIONAL CONTROL VALVES

EXPLOSION PROOF DIRECTIONAL CONTROL VALVE TYPE ED6 SERIE 6X NEC STANDARD

Solenoid operated spool valve with soft switching NG10 ISO

Directional Control Valves. General Description. Features. Specifications

UPS Pure Sinewave UPS

DSE /116 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 90 l/min

Solenoid Pilot Operated Directional Control Valve

5/2 and 5/3 Way Valves

152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:

Pneumatic. PVL Inline Valves. Catalogue No.

Directional spool valves, pilot-operated, with hydraulic or electro-hydraulic actuation

Directional spool valves, direct operated, with solenoid actuation. Type WE VP1. Features. Contents. RE VP1 Edition: Replaces:

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)

PREFILL AND EXHAUST VALVE PV 100 TO PV 200

TA25DU0.4 Overload Relay a. Features. Descriptions

Solenoid Pilot Operated Directional Control Valve

JUMO MIDAS S05 OEM pressure transmitter - universal

Directional spool valves, pilot-operated, with electro-hydraulic actuation. Type WEH =UR. Features. Contents. RE Edition:

Proportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)

Proportional directional valve, pilot operated with electrical position feedback and integrated electronics (OBE)

2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

Proportional pressure reducing valve type 3WZCDE6 is a

Solenoid Pilot Operated Directional Control Valve

3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.

SMP-BC Mixproof Valve

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

Directional seat valves, direct operated, with solenoid actuation. Type SEW. Contents. Features. RE Edition: Replaces: 07.

E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A

p max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60

BIMETAL-POINTER-THERMOMETER

Brazed heat exchanger XB

NT Series SSS MARK-II

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

NT Series SSS MARK-II

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

SERVICE MANUAL HWH TOUCH PANEL-CONTROLLED 325 SERIES HYDRAULIC LEVELING SYSTEM. FEATURING: Touch Panel Leveling Control

3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators

SOLENOID VALVES / DIRECTIONAL CONTROL VALVES

EFFEKTA. Solar inverter HX-Series NEU / NEW

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

FUEL SYSTEM. Table of Contents. Section 3C Oil Injection

Compact reduced wiring MN4E0 Series 3, 4 port block manifold with high integration, space saving and high function performance.

DS /217 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE SUBPLATE MOUNTING ISO p max 320 bar Q max 150 l/min MOUNTING SURFACE

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

HK CATALOGUE HYDRAULICS 12

2/2, 3/2 and 4/2 directional seat valves with solenoid actuation

Convenience electronics

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES

PROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE

IFP DG08 SOLENOID CONTROLLED PILOT OPERATED DIRECTIONAL VALVE SIZE NG22/CETOP08

Ex-proof proportional valves multicertification ATEX, IECEx, EAC

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION

Spring Return DuraDrive Two-Position Actuator

Directional spool valves, direct operated, with solenoid actuation. Type 5-.WE. Features. Contents. RE Edition: Replaces:

HF Bloc-...-VPS HF Bloc-...-DSLC-SG HF Bloc-...-DSLC-HP

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)

Spark Plug Fouling 3.0 Liter OptiMax

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24

FINGER STRIPS. and other EMI shielding products. Characteristics

DC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor

HEATING BLANKETS FOR GENERAL COMPOSITE REPAIR

FUEL SYSTEM. Table of Contents. Section 3B - Carburetors

Transcription:

Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt Vlve 5/2 Wy Oscillting Vlves, Series S9 3/2 nd 5/2 Wy- Pedl ctuted vlve, Series F 2/2 Wy Stop Vlve Series ARKV Electricl G1/8 G1/4 Hnd G1/8 G1/4 102, 103 104-106 107 108, 109 109 110 Pneumtic G1/8 108, 109 110 110 (Timer) Pneumtic G1/4 111 111 1 Pedl G1/4 113 113 114 Pneumtic G1/2 G3/4 G1 G11/2 G2 115 116 116 Order Instructions Overview Specil Vlves Connection size G1/8 to G2 A4P026E-Octoer 2006 101

Wy Vlves with NAMUR Connections Chrcteristics for Stndrd Vlves Series S9 G1/8, G1/4 NAMUR Chrcteristics Symol Unit Series S9 G1/8 G1/4 Actution Electriclly ctuted Electriclly ctuted Generl Fetures Spoolvlve Spoolvlve Mounting 2 Screws M5 2 Screws M6 Tue connection Thred/NAMUR connections Thred/NAMUR connections Thred G1/8 7,4 deep G1/4 11 deep Weight kg 0.245 permnent signl version kg 0.340 impulse version 0.600 permnent signl version 0.700 impulse version Instlltion In ny position In ny position Amient temperture T min. / mx. C -10 to +60-10 to +60 rnge ( 1 Medium temperture T min. / mx. C -10 to +60-10 to +60 rnge ( 1 Medium Filtered compressed ir Luriction Pneumtic Chrcteristics Nominl pressure p min. / mx. r 6 Operting pressure rnge With or without oil mist luriction (We recommend the use of minerl oil type VG 32 to ISO 3448) permnent signl p min. / mx. r 2 10 version impulse version p min. / mx. r 1.5 10 Nominl flow Q N l/min 500 1300 ( 3 Actution ( 1 Note : Plese consult us for operting tempertures elow 0 C ( 2 Low wttge version connector DIN EN 175301-803 form A ( 3 Version middle position vented 1000 l/min Electricl Voltge type Nominl voltge Pilot operted Alternting current (50/60Hz) Direct current Stndrd version Un V 230 ±10% 24 ±10% other voltges on request Low wttge version Un V 230 ±10% 24 ±10% other voltges on request Initil power consumption Stndrd version VA (W) 8.5 2.5 Low wttge version VA (W) 6.6 2.1 Continuous consumption Stndrd version VA (W) 6.0 2.5 Low wttge version VA (W) 3.9 2.1 Duty cycle ED % 100 Electricl protection IP IP 65 to DIN 40050 (pplise only to solenoid with connector) Connection Plug to DIN EN 175301-803 form B industril stndrd ( 2 102 A4P026E-Octoer 2006

Series S9 G1/8, G1/4 NAMUR Chrcteristics Symol Unit Series S9 G1/8 G1/4 Actution Electriclly ctuted Electriclly ctuted Generl Fetures Spool vlve Spool vlve Mounting 2 Screws M5 2 Screws M6 Tue connection Thred/NAMUR connections Thred/NAMUR connections Weight kg 0.245 permnent signl version 0.600 permnent signl version 0.340 impulse version 0.700 impulse version Instlltion In ny position In ny position Amient temperture T min. / mx. C -10 to +60-10 to +60 rnge ( 1 Medium temperture rnge ( 1 T min. / mx. C -10 to +60-10 to +60 Medium Filtered, unliricted compressed ir free from wter nd dirt to ISO 8573-1 Solids: Clss 7 prticle < 40µm for gs Wter content: pressure dew point +3 C, Clss 4, ut t lest 5 C elow minimum operting temperture Pneumtic Chrcteristics Nominl pressure p min. / mx. r 6 Operting pressure rnge permnent signl version p min. / mx. r 2 8 impulse version p min. / mx. r 1.5 8 Nominl flow Q N l/min 500 1300 ( 3 Actution Electricl Pilot operted Certifiction EC Test Certificte for single vlve: not required for mechnicl units EC Test Certificte for solenoid coil: PTB-No. 03 Ex IEC 2019X nd PTB 03 ATEX 2018X to T5 Ctegory, type of ignition protection Voltge type Nominl voltge Un V 230 ±10% 110 ±10% 24 ±10% Single vlve: II 2G c T4 T135 C - 10 C T +60 C Solenoid/individul use: II 2G EEx m II T5-20 C T +50 C Solenoid/mnifold mounting: II 2G EEx m II T5-20 C T +40 C Alternting current Direct current (50/60Hz) Mx. switching frequency Hz 1 Connection G1/8, G1/4 G1/8, G1/4 Power rting t U N Mx. power t U N ( 2 VA (W) VA (W) 3.1 (230V) 3.0 (110V) 2.5 (24V) 2.9 (230V) 2.8 (110V) 2.4 (24V) 24 ±10% other voltges on request 3.3 (24V) 3.0 (24V) Electricl protection IP IP65 (pplise only to solenoid with cle) Connection Cle cle lengths see Order Instructions Wy Vlves with NAMUR Connections Chrcteristics for Vlves in EX Ares ( 1 Note : Plese consult us for operting tempertures elow 0 C ( 2 Mximum power if wrmed up to therml lod limit ( 3 Version middle position vented 1000 l/min A4P026E-Octoer 2006 103

3/2 Wy Vlves Series S9 G1/4 Electriclly ctuted : S9 381RF-1/4-NC SO Actutions: Electricl pilot operted Versions: With NAMUR connections Version to ATEX Stndrd 5,5 x 3 flt mounting dimensions to NAMUR stndrd * Mnul override ** Solenoid width = 30 mm on low wttge coil version Solenoid for use in EX res Dimensions Solenoid width 30 mm Cle lenth see Order Instructions The delivery includes: 1 Vlve 2 Mounting Screws 1 Coding pin 2 O-Rings X = 15,5 mm For more informtion on vlves to ATEX stndrds see pge 46, 47, 107 Overview see pge 107 104 A4P026E-Octoer 2006

* Electriclly ctuted : S9 581..-1/8 SO 5/2 Wy Vlves Series S9 c. 208 225,2 24 3 5,5 x 3 flt mounting dimensions to NAMUR stndrd 14 19,5 4 2 4 32 5 1 3 M5 G1/8 10,5 28 16 33,5 18 18 87,5 15,5 32 22 5,2 14 9 3 4 2 19,5 32 5 1 3 22 22 106 20 148 * ** 62 10 8 M5 56 c. 140 * * G1/8, G1/4 Actutions: Electricl pilot operted Versions: With NAMUR connections Version to ATEX stndrd 63 40 15,5 only for type S9 581-1/8SO 22** * Mnul override ** Solenoid width = 30 mm on low wttge coil version Electriclly ctuted : S9 581..-1/4 SO Solenoid for use in EX res Dimensions Solenoid width 30 mm Cle length see Order Instructions mounting dimensions 24 30,5 to NAMUR stndrd 5,5 x 3 flt 20,7 32,7 G1/4 41 c. 159 c. 231 X = 15,5 mm For more informtion on vlves to ATEX stndrds see pge 46, 47, 107 The delivery includes: 1 Vlve 2 Mounting Screws 1 Coding pin 2 O-Rings only for type S9 581-1/4SO 63 52 15,5 * Mnul override ** Solenoid width = 30 mm on low wttge coil version Overview see pge 107 A4P026E-Octoer 2006 105

5/3 Wy Vlves Series S9 Electriclly ctuted : S9 581RF.-1/8-NC SO G1/8, G1/4 Actutions: Electricl pilot operted Versions: With NAMUR connections Version to ATEX Stndrd 5,5 x 3 flt mounting dimensions to NAMUR stndrd * Mnul override ** Solenoid width = 30 mm on low wttge coil version Electriclly ctuted : S9 581RF.-1/4-NC SO Solenoid for use in EX res Dimensions 5,5 x 3 flt Solenoid width 30 mm Cle length see Order Instructions The delivery includes: 1 Ventil 2 Mounting Screws 1 Coding pin 2 O-Rings mounting dimensions to NAMUR stndrd For more informtion on vlves to ATEX stndrds see pge 46, 47, 107 * Mnul override ** Solenoid width = 30 mm on low wttge coil version Overview see pge 107 106 A4P026E-Octoer 2006

Order Instructions 3/2, 5/2 nd 5/3 Wy Vlves with NAMUR connections Actution Symol Order Instructions Pge Order No. Electricl, 2 10 permnent signl S9 381RF-1/4NG SO-.. PD 33854-..33 104 1 3 Electricl, permnent signl 14 4 2 S9 581RF-1/8 SO-.. PD 34143-..33 105 S9 581RF-1/4 SO-.. PD 34985-..33 105 5 13 Electricl, impulse 14 4 2 S9 581-1/8 SO-.. PD 34984-..33 105 S9 581-1/4 SO-.. PD 34986-..33 105 5 1 3 Electricl, permnent signl spring return to middle position 4 2 14 5 1 3 4 2 14 5 1 3 S9 581RFG-1/8 SO-.. PD 40813-..33 106 S9 581RFG-1/4 SO-.. PD 40808-..33 106 S9 581RFE-1/8 SO-.. PD 40814-..33 106 S9 581RFE-1/4 SO-.. PD 40618-..33 106 14 4 2 S9 581RFB-1/8 SO-.. PD 40815-..33 106 S9 581RFB-1/4 SO-.. PD 40809-..33 106 5 1 3 Solenoid version Nominl voltge Applicle for Key code ATEX dditon Stndrd version 230V 50/60Hz 110 V = 61 24V = 60V 50/60Hz 02 Low wttge version 24V = 13 230V 50/60Hz 69 EX Are versions to ATEX Stndrd Ctegory, type of ignition protection Single vlve: II 2G c T4 T135 C -10 C T +60 C Solenoid/individul use: II 2G EEx m II T5-20 C T +50 C Solenoid/mnifold mounting: II 2G EEx m II T5-20 C T +40 C Solenoid version Nominl voltge Applicle for Key code ATEX dditon Solenoid 24V = 48 Atex with cle 1.2 m with cle 3 m 24V = 45 Atex with cle 5 m 24V = 46 Atex with cle 10 m 24V = 47 Atex with cle 1.2 m 24V 50/60Hz 99 Atex with cle 1.2 m 110V 50/60Hz 97 Atex with cle 1.2 m 230V 50/60Hz 98 Atex Exmple for vlves in ATEX-Version: for vlves Series S9-G1/8, S9-G1/4, S9-G1/2 Plese dd ehind the stndrd order No. ATEX : S9 581RFG-1/8SO-4633 Order No. PA34143-4633ATEX A4P026E-Octoer 2006 107

5/2 Wy Vlve Series S9 G1/8, G1/4 Actution: Pneumtic for two hnd opertion 2 hnd operted vlve for pneumticlly controlled mchines nd equipment. The 2-hnded trip vlves PD37173 nd PD37673 re clssed s ctegory 1 in ccordnce with DIN EN 954-1 (only in connection with suitle push utton vlves) nd type IIIA in ccordnce with DIN EN 574. ISO 13851: Sfety of mchines; twohnded controls. ISO 13849-1: Sfety of mchines; sfetyrelted prts of control systems. Are of ppliction: The 2-hnded sfety vlves re intended to e used where persons crry out mnul control functions in res tht re suject to ccident risks. These comprise primrily equipment with pneumtic cylinders, the opertion of which requires tht oth hnds re kept wy from the dnger zone. The vlves cn lso e used to prevent unintended strts of pneumtic processes. Chrcteristics Pneumticlly ctuted with 2 hnd opertion nd Time Dely Vlve Chrcteristics Symol Unit Description Version Two Hnd Opertion Time Dely Vlve Generl Fetures S9 563/65RF- 1/8-SO S9 563/65RF- 1/4-SO S9 361RF- 1/8-SO Spool vlve Spool vlve Spool vlve Mounting 2 Screws M5 2 Screws M6 2 Screws M5 Tue connection Thred Thred Thred Port size G1/8 G1/4 (.1 nd G1/8.2: G1/8) Weight (mss) kg 0.27 0.64 0.18 Instlltion Amient temperture rnge Medium temperture rnge Medium Luriction * Pneumtic Chrcteristics In ny position T min/mx C -10 to +60 ** T min/mx C -10 to +60 ** Nominl pressure p n r 6 Filtered compressed ir - free from wter nd dirt to ISO 8573-1 Solids: Clss 6 prticle <5µm for Gs gswter content: pressure dew point +3 C, Clss 4, ut t lest 5 C less thn min. operting temperture none or oil mist luriction Operting pressure rnge p min/mx r 0 10 2-10 Nominl flow Q N l/min 500 1300 450 Actution Pneumtic Direct Actution pressure rnge p st min/mx 2 10 3 10 2-10 * We recommend the use of minerl oil type VG 32 to ISO 3448 ** Note: Plese consult us for operting tempertures elow 0 C Function: The vlve only switches from outlet port 4 to outlet port 2 if oth signl inlets re simultneously ctuted or re ctuted within 0.5 s. When the opertor releses one or oth control uttons, the vlve switches ck immeditely. In order to resume the switch function, oth trip signls hve to e cncelled first. Note: Not pplicle for operting eccentric presses nd presses of similr design. Fitting Instructions: If due to mechnicl stopping nd re-opening of the compressed ir supply oth control uttons re operted or possily locked t the sme time, the 2-hnded trip vlve will continue the control function. The 2-hnded trip vlve is not suited to prevent the switching from port 4 to port 2 upon the compressed ir eing switched ck on fter it ws shut off nd/or permnently operted control uttons. In order to prevent this process from hppening, we dvise users tht it is necessry to instll time-dely vlve in the supply line of one of the control uttons (line.1 or.2). We recommend the following time-dely vlve from our rnge: type PD49078. As push utton vlve we recommend the sic vlve PA10307 for control pnel configurtion, in comintion with push utton KX9357. Chrcteristics of time-dely vlve see tle ove. 108 A4P026E-Octoer 2006

Sfety switch digrm (exmple) Usge of 2-hnd-opertion vlve with cecessry time dely vlve In order to comply with sfety requirements, plnt nd equipment with certin operting mechnisms require the instlltion of timedely vlve in the pneumtic control system, s shown in the exmple. 2-hnded trip vlve : S9563/65-1/8-SO PD37673 : S9563/65-1/4-SO PD37173 Pressure Control Vlve, comprising of sic vlve nd ctivity prt Bsic vlve: S9 390RF-1/8 PA10307 Pushutton, red: KX9357 Time dely vlve S9361RF-1/8-SO PD49078 Pneumticlly ctuted y 2-hnded trip vlve : S9 563/65RF-1/8-SO : S9 563/65RF-1/4-SO A4P026E-Octoer 2006 109

Time-dely vlve to 2-hnded trip vlve : S9 361RF-1/8-SO Note: Suitle mesures must e tken to protect the vlves ginst ingress of dust nd wter. Order Instructions Actution Symol Order Instructions pneumtic, y 2-hnd tripping 4 2.1 S9 563/65RF-1/8-SO Order No. PD37673 1 t &.2 S9 563/65RF-1/4-SO PD37173 5 1 3 Time Dely Vlve for 2-Hnd-sfety relted control S9 361RF-1/8-SO PD49078 110 A4P026E-Octoer 2006

Chrcteristics Chrcteristics Symol Unit Description Generl Fetures Spool vlve Mounting 2 Screws M6 (M4) Tue connection Thred Connection size G1/4, 11 deep Weight (mss) kg 0.65 Instlltion In ny position Amient temperture T min/mx C -10 to +60 rnge ** Medium T min/mx C -10 to +60 temperture rnge ** Medium Filtered nd oiled or filtered, unoiled compressed ir Luriction * None or oil mist luriction Pneumtic Chrcteristics Nominl pressure p n r 6 Operting pressure rnge p min/mx r 3 8 Nominl flow Q N l/min 1300 Actution Pneumtic Direct Actution pressure rnge p st min/mx 3 8 * We recommend the use of minerl oil type VG 32 to ISO 3448 ** Note: Plese consult us for operting tempertures elow 0 C 5/2-Wy Oscillting Vlves Series S9 G1/4 Actution: Pneumtic The oscillting vlve genertes oscillting movements such s e.g. shking, hmmering, plunging, feed motions etc. Function: If compressed ir is intro-ducesed into inlet port 1, the outlet ports 4 nd 2 re lterntely supplied with compressed ir. The speed of the operted cylinder nd lso the stroke frequency re djusted with two exhust ir throttles. Pneumtic oscillting : S9 568/68-1/4-SO A4P026E-Octoer 2006 111

Order Instructions Actution Symol Order Instructions Order No. Pneumtic S9 568/68-1/4-SO PD 34796 1 A4P026E-Octoer 2006

Chrcteristics Chrcteristics Symol Unit Description Generl Fetures Poppet Vlve Mounting 4 Screws M8 ( 1 Tue connection Thred Port size G1/4 Weight (mss) kg 1.5 Instlltion In ny position Amient temperture T min/mx C -10 to +55 rnge ( 3 Medium temperture T min/mx C -10 to +60 rnge ( 3 Medium Filtered nd oiled or filtered, unoiled compressed ir Luriction ( 2 Oil mist luriction comptile with Bun N Pneumtic Chrcteristics Nominl pressure p n r 6 Operting pressure rnge p min/mx r 0 10 Nominl flow Q N l/min 1400 Actution Mnul control Direct Stroke mm 2 Actution force F N c. 30 ( 1 After removing the ruer footing ( 2 We recommend the use of minerl oil type VG 32 to ISO 3448 ( 3 Note: Plese consult us for operting tempertures elow 0 C 3/2 nd 5/2 Wy Vlves Pedl ctuted Series F G1/4 Actution: Pedl Connections for 3/2 wy version: Version Normlly closed : P, B, S Normlly open : P, A, R * Only for version oth switch positions indexed return is only effected fter ctuting the locking pedl. Mounting Instruction: Use only screw connections with mx. wrench size cross flts of 15. Connection designtion: A = 4 Outlet B = 2 Outlet R = 5 Exhust P = 1 Air supply S = 3 Exhust Pedl ctuted : F331..-08.., F531..-08 Actution stroke A4P026E-Octoer 2006 113

Order Instructions 3/2 nd 5/2 Wy Vlves Actution Symol Order Instructions Pedl with spring return B Order No. F 331RF-08NG* KZ 4410 P S A F 331RF-08NO* KZ 4411 Pedl without reset, P R B F 331-08NG* KZ 4408, P S A F 331-08NO* KZ 4409 P R Pedl with spring return A B F 531RF-08 KZ 4413 Pedl oth switch positions indexed * NC Version normlly closed NO Version normlly open, RPS A B RPS F 531-08 KZ 44 114 A4P026E-Octoer 2006

Chrcteristics Chrcteristics Symol Unit Description Generl Fetures Description 2/2 Wy Vlve Poppet vlve normlly closed Mounting Direct in piping Tue connection Thred Port size G1/2 G3/4 G1 G1 1/2 G2 Weight (mss) kg 0.745 1.115 1.365 2.695 4.290 Instlltion In ny position Amient temperture rnge Medium temperture rnge Medium T min/mx C -20 to +80 T min/mx C 0 to +80 Note: Plese consult us for operting tempertures elow 0 C Compressed ir, neutrl gses, presswter (for low flow- und vlve closingspeed only ) 2/2 Wy Stop Vlves Series ARKV G1/2 to G2 Actution: Pneumtic Actuting medium filtered compressed ir Pneumtic chrcteristics Nominl pressure p n r 6.3 Operting pressure rnge p min/mx r 0 10 Nominl flow Q N l/min 2200 5000 6900 22000 40000 Actution Pneumtic Direct Actuting Pressure : ARKV-15 Actuting Pressure : ARKV-20 Actuting Pressure : ARKV-25 O = p st min to open S = p st mx to close O = p st min to open S = p st mx to close O = p st min to open S = p st mx to close Actuting Pressure : ARKV-40 Actuting Pressure : ARKV-50 O = p st min to open S = p st mx to close O = p st min to open S = p st mx to close A4P026E-Octoer 2006 115

Pneumticlly ctuted : ARKV-.. Dimension Tle A B C D E F G H ARKV-15 NC 65 G1/2 G1/8 55 61 41.5 95 109.5 ARKV-20 NC 76 G3/4 G1/4 65 75 50 1 9 ARKV-25 NC 91 G1 G1/4 65 75 57 119 139 ARKV-40 NC 3 G11/2 G1/4 110 1 67 137 167.5 ARKV-50 NC 150 G2 G1/4 130 134 75 153 190 Order Instructions Actution Symol Order dt Order No. Pneumtic ARKV-15 NC PD 07334 ARKV-20 NC PD 07580 ARKV-25 NC PD 07581 ARKV-40 NC PD 07757 ARKV-50 NC PD 07765 116 A4P026E-Octoer 2006