This correction booklet must be used in correlation with the 1986 Safari GL LC operator's manual (PIN ) RA~ARI GRAND LUXE LC

Similar documents
This correction booklet must be used in correlation with the 1984 Citation Skandic 377 operator's manual (PIN )

CONTROLS/INSTRUMENTS. G) Tether Cut-Out Switch H) Manual-Starter Handle I) Primer. K) Tachometer

WARNING. Identifies an instruction which, if not followed, could cause serious personal injuries including possibility of death.

LIMITED WARRANTY VALIDATION CONTROLS/INSTRUMENTS

80-52A-00 EA Reference No A-00 ISSUED:

Unit: mm (in) ITEM STANDARD LIMIT IN. 33 (1.3) EX.

21-21H-00 PB-2100,PB-2155,PB-2200SI 1

21-25F-00 PB-251, PB-255ES, ES-255ES 1

SERVICE DATA GT-220ES SRM-220ES TRIMMER/BRUSHCUTTER. (Serial nember : and after) (Serial nember : and after) INDEX INTRODUCTION

INDEX INTRODUCTION. Reference No L-01 REVISED:

INTRODUCTION. Reference No S-01 REVISED:

SERVICE DATA PPF-2100 PPT-2100 PPT-2400 PPFD-2400 POWER PRUNER 17-21C-00 INDEX. with new gear case INTRODUCTION CONTENTS

TABLE OF CONTENTS 0 LUBRICATION AND MAINTENANCE CHART

10-25J-00 SRM-261T 1 INTRODUCTION. Reference No J-00 ISSUED:

SERVICE DATA. CS-310 (Serial number : ) (Serial number : ) CHAIN SAW 01-30A-00 CS CONTENTS INTRODUCTION

PERIODIC MAINTENANCE CHART 0

LUBRICATION AND MAINTENANCE CHART 0

rev 5_ EA4300F40B (Makita Teal) EA4300FR (Makita Red) PS-421 (Dolmar Red)

01-36D-02 CS INTRODUCTION. Reference No D-02 ISSUED:

OLYMPIC, SUPER OLYMPIC, ALPINE

LUBRICATION AND MAINTENANCE CHART 0

SAFETY WARNING AFTER SALES SERVICE BOMBARDIER INC. VALCOURT, QUEBEC CANADA J0E 2L0

SERVICE MANUAL HYOSUNG MOTORS & MACHINERY INC HR8310 SERVICE MANUAL

00-33A-01 CS-330T, CS-360T 1

SERVICE DATA TRIMMER/BRUSHCUTTER KIORITZ CORPORATION F-00 SRM-260 SRM-261 Series 1

20 C (68 F) Ω C (68 86 F)

rev 1_09/20/2017 PS-35C EA3500SR

INTRODUCTION. Reference No L-01 R E V I SED :

rev 8_ EK6101 PC-6114

Model No. EK8100 POWER CUTTER

SERVICE DATA POWER PRUNER ECHO: PPF-300ES ECHO: PPT-300ES. (Serial number : and after) CONTENTS INTRODUCTION

SERVICE MANUAL SUPPLEMENT

401 0 Row-Crop & Standard Tractors

00-36A-04 CS-350T, CS-350TES, CS-350WES 1

CS340ES. Property of - Not for Resale A1

SERVICE DATA CHAIN SAW ECHO: CS-280WES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-00 ISSUED:

rev 2_ EA6100P53G (Makita Teal) EA6100PR (Makita Red) PS-6100 (Dolmar Red) PS-6100H (Dolmar Red)

SERVICE MANUAL SUPPLEMENT

Motorcycle 2012 Model: LS650L2 Date: May 2011

rev 3_ EK6101 PC-6114

4 qts 4 qts 6 qts. 10 qts 12.5 qts. 7.2 pints 9 pints. 3.5 pints. 2.2 pints. 2.5 pints 3.13 pints 3.13 pints

SERVICE DATA TRIMMER/BRUSHCUTTER ECHO: SRM-236ES STAGE MODEL. (Serial number : and after) INTRODUCTION CONTENTS

Motorcycle - Specifications

0 e r' n ~ fr «r Ill

I WARNING I This WARNING symbol identifies special instructions or procedures which, if not correctly

rev 2_ EA5000P53G (Makita Teal) EA5000PR (Makita Red) PS-5105 (Dolmar Red) PS-5105H (Dolmar Red)

American Honda Motor Co., Inc.

Manual for Engine 2350 C M A N U A L. for the. Engine SOLO Type 2350 C. Serial No.:.. Manufactured :..

September 2015 Subject: MX Z X 600RS Predelivery Inspection No

SERVICE DATA. SRM-230U (Serial number : ~ ) SRM-231U (Serial number : ~ ) TRIMMER/BRUSHCUTTER KIORITZ CORPORATION

Illustrated Parts List 12H800

SPECIFICATIONS TEST AND ADJUSTMENT SPECIFICATIONS SPECIFICATIONS ENGINE FD620D, K SERIES

SERVICE DATA. Unit: mm (in) ITEM STANDARD LIMIT Valve diam. IN (1.42) EX ( ) EX.

3. INSPECTION/ADJUSTMENT

LUBRICATION AND MAINTENANCE CHART 0

301 0 Row Crop. and Standard

u~ DualitY V.I.N. model purchase date warranty expiry date DEALER IMPRINT AREA To be completed by dealer at time of sale.

ATV 2012 Model: LT-F250L2 Date: February 2011

Replacement Parts & Accessories Price List

Illustrated Parts List 12F800

SERVICE DATA CHAIN SAW CS-450. (Serial number : and after) CONTENTS INTRODUCTION. Reference No B-01 REVISED: ISSUED:

Illustrated Parts List. Model Series 12H800. TYPE NUMBERS 0652 through TABLE OF CONTENTS

solo KLEINMOTOREN GMBH

INSPECTION/ADJUSTMENT

SERVICE DATA Date: August 1, 2007

Model No. EA6100P PETROL CHAIN SAW

rev 5_ EA5600FR

Illustrated Parts List 12F800

3. INSPECTION/ADJUSTMENT

solo KLEINMOTOREN GMBH

X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY

PARTIAL ENGINE ASSY (2TR FE)

120 XC SP Model #S01WB1AS Rev. 01. E 2000 Polaris Sales Inc. PARTS MANUAL PN and MICROFICHE PN /00

TNT. COLOR CHOICE Yellow / Yellow DIMENSIONS SUSPENSION

Drawing A Crankcase 041 AV SCS

ILle_ OPERATOR'S MANUAL. Litho'd in Canada

To be completed by dealer at time of sale DEALER IMPRINT AREA

... TX-L MODEL NUMBER CONTENTS 2-3 BODY. 4-6 HOOD ASSEMBLY IGNITION ASSEMBLY. 8-9 SEAT ASSEMBLY STEERING ASSEMBLY.

YAMAHA WATER PUMP YP10G(7TY1) OTHERS 287TY 400E2

Illustrated Parts List. Model Series 12G800. TYPE NUMBERS 0600 through TABLE OF CONTENTS

SPECIFICATIONS TEST AND ADJUSTMENT SPECIFICATIONS SPECIFICATIONS ENGINE FD620D, K SERIES

FRONT RACK, BODY PANEL, AND HEADLIGHT ASSEMBLIES

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List

erator' m I ~---- -~--~- ft z~lfat4iii{r,

Drawing A Crankcase. Drawing A Crankcase

Replacement Parts & Accessories Price List

Super 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber

XF 800 Sno Pro SHARE OUR PASSION.

ALPINES II OPERATOR'S MANUAL

TABLE OF CONTENTS 0 ENGINE ENGINE LEAK VERIFICATION FLOW CHART FUEL AND OIL SYSTEMS ELECTRICAL SYSTEM...

Sno Pro 120. Model Number S2012ACAAAUSG SHARE OUR PASSION.

Replacement Parts & Accessories Price List

Replacement Parts & Accessories Price List

SERVICE DATA CHAIN SAW ECHO: CS-352ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION

John Deere. MODEL: 4030 Gas & Diesel JD-O-OMR53778

SERVICE DATA. Item Standard Limit Valve diam. IN (1.42) EX (1.30) Tappet clearance (When cold)

John Deere. MODEL: 1010 Gasoline Wheel Tractor JD-O-OMT15504

SERVICE DATA CHAIN SAW ECHO: CS-500ES STAGE MODEL. (Serial number : and after) CONTENTS INTRODUCTION

SERVICE DATA Date: July 27, 2001 Model: RM250K2

Transcription:

Operator's manual This correction booklet must be used in correlation with the 1986 Safari 377-377 -447-GL LC operator's manual (PIN 414 5721 00) RA~ARI GRAND LUXE LC 414 5869 00

INDEX 0 NOTE: Information and instructions regarding the Safari GL LC model contained in the 1986 Safari 377, 377E, 447, GL LC operator's manual also apply to the Safari GL LC model exceptions are contained in this supplement. CONTROLS/INSTRUMENTS.... HOW TO IDENTIFY YOUR SNOWMOBILE LUBRICATION Slide suspension MAINTENANCE Suspension adjustment. TOOLS.... SPECIFICATIONS.... 2 3 3 4 5 6

CONTROLS/INSTRUMENTS J E B M 0 L K N S R F G o----+--11---+-"'<f---->' Q------IC:dl~ A009007009 AJ Throttle lever 8) Brake lever CJ Ignition switch DJ Light switch (Electric model) EJ Head/amp dimmer switch F) Emergency cut-out switch G) Tether cut-out switch H) Rewind starter handle /} Primer J) Adjustable steering handle KJ Speedometer (Optional on some (models) LJ Tachometer (Optional on some models) MJ Temperature gauge (On liquid cooled model only) NJ Injection oil level pilot lamp (red) (Optional on some models) OJ High beam pilot lamp (blue) (Optional on some models) PJ Tank cap OJ Hood opening RJ Retractable head/amp lever SJ Electric fuel gauge S) Electric fuel gauge The electric fuel gauge is located in the dashboard and allows driver to observe the fuel level while riding the snowmobile. 2

HOW TO IDENTIFY YOUR SNOWMOBILE---------- -- A012005001 LUBRICATION Slide suspension Lubricate front & rear arms at grease fittings until grease appears at joints. Use low temperature grease only. A014005008 Rear section Front section A014005007 3

MAINTENANCE Suspension adjustment The suspension is adjustable. The front adjustment for surface condition, the rear for driver's weight. Use the special keys located in tool box. Adjuster blocks The rear spring preload can be adjusted as follows: lower position: 68 kg ( 150 lbs) or less middle position: 68-82 kg ( 150-180 lbs) highest position: 82 kg (180 lbs) and higher. A014005013 A009005003 To adjust, use the adjustment key supplied and turn the spring collar accordingly. When the front adjuster blocks are at the lowest elevation more weight is distributed on the skis. At the highest position the weight is transferred from the skis to the track. 0 NOTE: For deep snow condition or hill climbing, it is recommended to place the front adjuster blocks on the highest position.... CAUTION: Always turn the left "T side adjuster blocks in a clockwise direction, the right side blocks in a counterclockwise direction. Left and right adjuster blocks of each adjustment must always be set at the same elevation. 4

TOOLS As standard equipment each new snowmobile is supplied with basic tools such as screwdriver, wrenches, emergency starter rope, etc.. Standard Tools 8 c 0 0 1I F H A. Screwdriver B. Socket 10/13 mm C. Open end wrench 10/13 mm 0. Socket wrench handle E. Starter rope F. Socket 21 /26 mm G. Hexagonal wrench H. Spring collar adjustment key A000001090 ------------ 5

SPECIFICATIONS Safari Grand Luxe LC ENGINE Type 532 No. of cylinders 2 Bore 72 mm (2.835") Stroke 64 mm (2.520") Displacement 521.2 cm3 (26.64 in3) Compression ratio (corrected) 6.8:1 Maximum R.P.M. 7500 Carburetor type Mikuni Carburetor adjustment: -air screw 1 112 turn -idle speed 1800-2000 R.P.M. Rotary valve oil - Sl 568 ml reservoir -Imp. 20 oz Cooling system - Sl 4.5 L capacity -Imp. 160 oz -u.s. 154 oz Antifreeze/water mixture (% by volume) 60/40 Thermostat 43 C (110 F) Radiator pressure cap 90 kpa (13 lbf/in2) Torque: - engine head nuts M8: 21 N m (15 lbf ftl - crankcase nuts M6: 9 N m (80 lbf in) M8: 21 N m (15 lbf ft) - magneto ring nut M22: 85 N m (63 lbf ft) - crankcase engine support nuts M10: 38 N m (28 lbf ft) - exhaust manifold bolts M8: 21 N m (15 lbf ftl - electrical starter bolts M8: 21 N m (15 lbf ft) M5: 4 N m (3 lbf ft) CHASSIS Overall length 279.4 em (110") Overall width 96.5 em (38") Overall height 96.5 em (38") Ski stance (center to center) 81.9 em (32.25") Ski alignment (toe out) 3 mm (1/8") Torque: - steering arm/ski leg bolt 50 N m (37 lbf ft) - steering column/handlebar 26 N m (19 lbf ft) Weight 216.4 kg (477 lb) Bearing area 7594 cm2 (1177 in2) Ground pressure 2.85 kpa (.405 lb/in2) 6

Safari Grand Luxe LC POWER TRAIN Track: -width 41.9 em 116 1/2") - length 315 em 1124") - tension 13 mm 11/2") gap between slide and bottom inside of track. - alignment Equal distance between edges of track guides and slider shoes. Standard gear ratio 21/37 Drive belt: -number 414 5233 00 -Max. width 34.9 mm 11 3/8") -Min. width 31.7 mm 11 1/4") Chaincase oil 200 mll7 oz) ELECTRICAL Lighting system!output) 12 v. 160 w Bulb: - headlamp 60/55 w - tail/stop 5/21 w - speedometer 5W - tachometer 5W - temperature gauge 2W Fuse: - ignition switch 15 A - starter solenoid 30 A - tachometer 0.1 A Spark plug -type BASES - gap 0.4 mm 10.016") Ignition timing: - timing mark IB.T.D.C.) 1.75 mm 1.069") 117 ) - stroboscopic timing 6000 R.P.M. FUEL Gas type Regular leaded Fuel tank capacity - Sl 28.6 liters -Imp. 6.3 gals -u.s. 7.6 gals Injection oil Type Bombardier snowmobile injection oil Tank capacity - Sl 2.6 liters -Imp. 92 oz 88 oz BRAKE -u.s. Type Disc, self adjusting lining minimum thickness 3 mm 11/8") Control lever adjustment 13 mm 11/2") minimum distance from handle bar grip when fully applied. N.A.: Non applicable Bombardier Inc. reserves the right to make changes in design and specifications and/or to make additions to, or improvements in its product whithout imposing any obligation upon itself to install them on its products previously manufactured. ]

NOTES