TP ZETA Advanced Line Automatic punching machine 15 stations Fully auto-index EN
2 TP ZETA Performance and unlimited power TOP OF THE RANGE, UNIQUE IN THE MARKET TO NOT FEAR THE HIGH PUNCHING FREQUENCIES 1 Servo-electric 2 High performance 3 Big formats 4 Energy efficiency 5 Advanced programming SMART TOOL CHANGE SYSTEM Equipped with a fully automatic auto-index 15-station tool changer that can accommodate over 40 tools with the use of multi-tool. Maximum accessibility to allow the operator to setup the machine in short time.
3 SERVO-ELECTRIC ELECTRIC AND WITH LOW CONSUMPTION TP Zeta is equipped with an advanced power-assisted punching unit without any hydraulic oil and with low energy consumption. This allows the machine to reach punching frequencies of 900 rpm and a cutting force of 30 tons.
4 VERSATILE FULLY AUTO-INDEX All tools, single or multi-tool, can be rotated from 0 to 360 with minimum steps of 0.01. Advantages: Easy programming even for complex nesting Minor machine set-up costs Greater efficiency in material using 0-360 single tool rotation C FRAME s i n g l e t o o l All TECHNOLOGY punching machines have in common the open C frame for a maximum machine accessibility. High stability and precision Accessibility on three sides Processing out of standard formats 0-360 tool rotation inside in multi-tool m u l t i t o o l FANUC CNC AND CUSTOMIZED HMI All our punching machines are equipped with customized and designed HMI for an easy use thanks to the large touch screen of 15 inches. The use of CNCs, drives and motors produced by the world leader FANUC guarantees maximum reliability.
5 CUSTOMIZABLE SET-UP CUSTOMIZABLE TOOL STATIONS Each station can accommodate tool or multi-tool without diameter constraints. 15 auto-index stations fully customizable Tool change in only 3 seconds Deformations with heights above the standards MULTI-TOOL 5 OR 10 AUTO-INDEX TOOLS Massima personalizzazione The Multi-Tool allows to load 5 or 10 tools in one station. This increases machine capabilities, reduces processing time and set-up costs. SMART TOOL CHANGE The fast couling allows to hold punch and die in the station in just 12 seconds. 1 5 10 Utensile Utensili Utensili Utensile rotella Utensile filettatore
6 TOOLING TRUMPF Style tools Holders standard tool die punch punch special tools die die holder TRUMPF TOOLS TECHNOLOGY has chosen to equip its machines with TRU- MPF-style tools to offer the utmost technology in tools and the widest range of applications, through holders designed in partnership with WILSON TOOL. Advantages: Saves 30/40% compared to turret tools More handy thanks to the small size Realization of all types of processing IN A MACHINE MORE WORKING STEPS The large number of functions provided with TECHNOLOGY punching machines allow special processing without the help of other machines. Punching Nibbling Drawing Forming Marking Coining Bending Tapping Fine contouring High speed forming Deburring
7 NO LIMITS DIFFERENT FUNCTIONS TO ACCOMPLISH MUL- TIPLE STEPS OF WORK WITH ONE MACHINE FINE CONTOURING Fine contouring for complex processing and high quality of the workpieces FORMING Forming with single punch or by step DRAWING Drawing processing MARKING Marking works TAPPING Tapping without the removal of scraps on holes previously made HIGH SPEED FORMING CNC Functions for high speed forming (Wheel Tools by WILSON TOOL)
8 SOFTWARE AND TELE-ASSISTANCE customer technology internet TELE-ASSISTANCE Possibility to receive assistance from a qualified technician directly from our offices, by connecting remotely to your machine or to the programming computer. Reduction of diagnostic and intervention times Remote Assistance on Programming Software Reduction of machine stops CAD/CAM SOFTWARE JETCAM Expert programming software allows to leverage all potential of the TP OMEGA thanks to its automatisms, which make programming easy, fast and intuitive. Some advantages:: View and import DXF and DWG files Automatic nesting with metal sheet optimization Tools library management Automatic processing of the single component with selection of tools
9 OPTIONAL SCRAPS EVACUATION BELT AUTOMATIC CLAMPS Scraps evacuation belt allows the collection of processing The position of clamps is set during programming. In cases where the work falls in the clamps area, they automatically move away avoiding repositioning. residues in a suitable and large container, avoiding frequent breaks for the emptying of the container under machine. TABLE FOR WORKING PIECES UNLOADING SUPPORT TABLES The front table allows the automatic unload of working pieces Support tables in brushes or brushes and balls are suitable for working up to 3mm.
10 AUTOMATION SYSTEM CHEAPER AND MORE EFFICIENT PRODUCTION CNC sheet metal loading / unloading systems connected to the work center, making the production cycle completely automatic, saving up to 80% in the time of sheet management, minimizing operator intervention and presence. Advantages: Execution of workings 24h / 24h Productive cycles without operator involvement Loading sheet sizes with large dimensions ASSISTANCE AT KM 0 Total machine warranty for 24 months. First 5 years with assistance at Km 0, completely removing the distances between us and our customers. WARRANTY INTEGRAL 24 MONTHS
11 ITS FEATURES TP 3510 TP 3610 TP 3612 TP 3616 Cutting force kn 300 300 300 300 Maximum metal sheet thickness mm 6 6 6 6 Working size without repositioning mm 1250 x 2500 1500 x 2500 1500 x 3000 1500 x 4000 Working size with repositioning mm 1250 x 3000 1500 x 5000 1500 x 6000 1500 x 8000 X axis speed m/min 90 90 90 90 Y axis speed m/min 80 80 80 80 Simultaneous axes speed m/min 120 120 120 120 X axis stroke mm -40 / 2540-40 / 2540-40 / 3040-40 / 4100 Y axis stroke mm -40 / 1340-40 / 1590-40 / 1590-40 / 1590 Maximum metal sheet weight kg 150 150 150 150 Maximum punching frequency stroke/min 900 900 900 900 Positioning Accuracy mm ± 0.08 ± 0.08 ± 0.08 ± 0.08 Auto-index rotating speed rpm 60 60 60 60 Minimum Programmable Positioning 0,01 0,01 0,01 0,01 Vertical turret n tools 15 auto index 15 auto index 15 auto index 15 auto index Number of tools with multi-tool use n tools 19-150 19-150 19-150 19-150 Tool change time sec 3 3 3 3 Tool change time with multi-tool sec 0,5 0,5 0,5 0,5 Numerical control FANUC FANUC FANUC FANUC Average absorbed power kw 8 8 8 8 Width (A) mm 5300 5380 6200 10950 Lenght (B) mm 4950 4950 4950 4950 Height (C) mm 2360 2360 2360 2360 Weight kg 12.800 13.800 14.000 15.000 C A B
TECHNOLOGY Italiana Via Villa Ragone, 18/A 16039 Sestri Levante - Genova - Italy Tel. +39.0185.457115 - Fax +39.0185.41256 www.technologyitaliana.com TECHNOLOGY Iberica Poligono Alcamar c/la Cuba, 2 28816 Camarma de Esteruelas - Madrid - Spain www.technologyitaliana.com TECHNOLOGY Deutschland Am Steingarten 5 63906 Erlenbach am Main - Germany www.technologyitaliana.com ver. 2.0.05.18 - With the reservation to make changes www.technologyitaliana.com Seguici su: