Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Medium-Voltage Switchgear Catalog HA 4.3 008 Answers for energy.
R-HA4-086 eps Contents Application Application, Requirements Page Typical uses, features to 4 Technical Data Electrical data, pressure values, temperature 5 Switchgear installation 6 Shipping data 7 Product Range Product range overview, equipment features 8 and 9 Panels 0 to 8 Design Panel design 9 Components Two/three-position switch-disconnector 0 Two/three-position switch Busbars, HV CL (current-limiting) fuse assembly and 3 Operating mechanisms 4 Indicating and measuring equipment 5 Transformers 6 and 7 Cable connection 8 and 9 Dimensions (in mm/inch) Panels 30 to 38 Floor openings, fixing points 39 Standards Standards, specifications, guidelines 40 and 4 Notes 4 Invalid: Catalog HA 4.3 007 SIMOSEC ANSI switchgear 008 Siemens Power Transmission & Distribution, Inc. SIEMENS is a registered trademark of Siemens AG. Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
R-HA4- eps R-HA4-085 eps R-HA4-09 eps Application Typical uses R-HA4-0 eps R-HA4- eps Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 3
Application, Requirements Features SIMOSEC ANSI switchgear is a factory-assembled, typetested, three-phase, metalenclosed, indoor switchgear according to ANSI/IEEE C37.0.3 * for single busbars. Typical uses SIMOSEC ANSI switchgear is used for power distribution in distribution systems with feeder currents up to 00 A. Modular space-saving design allows use in Substations, customer transfer substations, distribution substations and switching substations of power supply and public utilities Public buildings, such as high-rise buildings, railway stations, hospitals Industrial plants Typical examples Office parks Airports Underground railway stations Sewage treatment plants Schools Shopping centers Petroleum industry Chemical industry Industrial plants Textile, paper and food industry Modular design Individual panels, for free combination and extension Technical features Air-insulated indoor switchgear Gas-insulated, maintenancefree switching functions for the two/three-position switch Three-pole primary enclosure Phases arranged one behind the other No cross-insulation between phases Busbar system at the top or bottom, as required by application Air-insulated busbar and cable connection system Two/three-position switch, metal-enclosed, with airinsulated primary terminals and gas-insulated switching functions Hermetically-sealed (welded) stainless-steel switchgear vessel, For switching devices With welded-in bushings (for electrical connections and mechanical components) With insulating gas SF 6 Metal-enclosed design Pressure relief To the rear and upwards Separately for each compartment Air-insulated cable connection system for conventional cable lugs Three-phase current transformer, factory-assembled on the feeder bushings Integrated low-voltage niche (standard) for installation of low-voltage devices E.g. terminals, pushbuttons MCBs Option: Space heaters for severe ambient conditions, e.g. condensation Reliability Type (design) tested with third-party witness Standardized and manufactured using numerically controlled machines Quality management system according to ISO 900 More than 500,000 switchgear panels in operation worldwide for many years No cross-insulation between phases Personal safety All switching operations can be performed with closed panel front Metal-enclosed switchgear HV CL fuses and cable terminations are only accessible when the outgoing feeders are grounded Logical mechanical interlocking Capacitive voltage detection system for verification of safe isolation from supply Grounding of outgoing feeders by means of make-proof grounding switches Security of operation Components, e.g., operating mechanisms, three-position switches proven for years Metal-enclosed panels plus metal compartmentalization between busbar and switching device and between switching device and cable connection compartment Three-position switch metalenclosed with gas-insulated switching functions Welded sealed-for-life switchgear vessel No cross-insulation between phases With welded-in bushings for cable connection, busbar and operating mechanism Switch operating mechanisms outside switchgear vessel Maintenance-free operating mechanism parts Mechanical switch position indications integrated in mimic diagram Switchgear interlocking system with logical mechanical interlocks Life-cycle cost-efficiency Extremely low life-cycle costs and extremely high availability throughout the entire product service life cycle as a result of: Two/three-position switch with gas-insulated quenching principle Minimum space requirement Easy switchgear extension Electrical features Ratedvoltagesupto7.6kV Rated short-circuit current (fused)upto63kaat5kv and below, and 0 ka at 7.6 kv Rated short-time withstand currentupto0ka,second or 5 ka, seconds Rated normal current of feeders Up to 600 A (feeders) Up to 00 A (panel without switch) Rated normal current of busbar up to 00 A * Standards see page 40 4 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Technical Data Electrical data of panels, pressure values, temperature Complete switchgear Rated insulation level Rated voltage U r kv 4.76 5 7.6 Rated short-duration (one minute) power-frequency kv 9 36 60 withstand voltage U d,r ms Rated lightning impulse withstand voltage U p,peak kv 60 95 5 Rated frequency f r Hz 50/60 Rated continuous current I r ) of busbar On request A 600 Standard A 00 Rated short-circuit current for switchgear with all feeders fused (panel type FS) ka (sym) 63 63 0 ka (asym) 0 0 3 ka (peak) 64 64 5 Rated short-time withstand current I 6) k for switchgear with t k =sratedduration uptoka 0 5 0 5 0 Rated peak withstand current I 6) p up to ka 5 65 5 65 5 Rated filling pressure p ) re PSI (kpa).8 (50) Minimum operating pressure p ) me at 0 C/68 F (absolute) 8.9 (30) Ambient temperature T for panels without secondary equipment C/ F -30 to +40 / - to +04 Cable switch panel type CS, cable connection panel type CC, cable grounding panel type CG Rated voltage U r kv 4.76 5 7.6 Rated continuous current I ) r for panel type CS, CG A 600 only for panel type CC A 600, 00 Rated fault closing current I 6) ma only for panel type CS ka (asym) 3 40 3 40 3 ka (peak) 5 65 5 65 5 Fuse panel types FS, FU Rated voltage U r kv 4.76 5 7.6 Rated continuous current I ) 4) r for feeder A 00, 600 Rated peak withstand current I 5) p up to ka 64 64 5 Rated fault closing current I 5) ma only for panel type FS ka (asym) 0 0 3 ka (peak) 64 64 5 Reference dimension e 3) for HV CL (current limiting) fuses mm/inch 537/. Maximum fuse rating for panel FS- A 450E 00E 65E for panel FS- A two 350E two 00E two 65E for panel FS-3 A three 00E three 00E three 65E Busbar grounding panel type BG Rated voltage U r kv 4.76 5 7.6 Rated fault closing current I 6) ma ka (asym) 3 40 3 40 3 ka (peak) 5 65 5 65 5 Busbar voltage metering switch panel types MS, MS3 Rated voltage U r kv 4.76 5 7.6 Rated peak withstand current I 5) p up to ka 5 65 5 65 5 Rated fault closing current I 5) ma ka (asym) 3 40 3 40 3 ka (peak) 5 65 5 65 5 Metering panel types MT3, MC3, bus riser panel BR Rated voltage U r kv 4.76 5 7.6 Rated continuous current I ) r A 600, 00 ) The rated continuous currents apply to ambient temperatures of 40 C/04 F. ) Pressure values for SF 6 -insulated vessels. 3) The fuse assembly is designed for a reference dimension e = 537 mm/. inch. With reference dimension e = 44 mm/ inch, an extension tube (95 mm/3.7 inch long) is required. 4) Depending on the HV CL fuse links. 5) Fused 6) Without fuses Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 5
Technical Data Switchgear installation Room planning Switchgear installation Room planning (dimensions in mm/inch) Wall-standing or free-standing arrangement Single row Double row (for face-to-face arrangement) Switchgear room Switchgear room Room dimensions See opposite dimension drawings Door dimensions The door dimensions depend on the Numberofpanelsina transport unit Heightofthepanel Switchgear fastening For floor openings and fixing points of the switchgear, see page 39 Foundations: Steel structure Steel-reinforced concrete Panel dimensions 550/00.5 * 50/88.5 ³600/0.4 080/4.5 30/48.4 >950/37.5*** 7 8 0 850/33.5 90/3.5 Cable basement 600/3.5 ** Wall-standing arrangement (side view) ³50/ 50/6 3 4 5 6 9 0 550/00.5 * 50/88.5 ³600/0.4 080/4.5 30/48.4 >950/37.5*** 0 850/33.5 90/3.5 Cable basement 600/3.5 ** Free-standing arrangement (side view) 50/6 5 6 See pages 30 to 38 Weight 0/0.4 ³50/ Theweightofapaneldepends ontheextenttowhichitis equipped (e.g. with motor operating mechanism, voltage transformer). For details, please refer to page 7. 3 HA4-50a eps 0/0.4 ³50/ 3 4 HA4-5a eps Plan view Plan view Relief opening Direction of pressure relief 3 Pressure relief of switchgear 4 Room height 5 Individual panel depth 6 Control aisle 7 Option: Floor cover 8 Cable 9 Foundation 0 Height of cable basement corresponding to cable bending radius Wall distance Side wall distance 3 Panel width 4 End wall 5 Depth of pressure relief duct * Switchgear height 50 mm / 88.5" or 550 mm / 00.5" ** Depending on bending radius of cable *** 950/37.5 distance shown is the space required by the equipment. The actual space must also reflect requirements of applicable codes (e.g. NEC) or standards and regulations. 6 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Technical Data Shipping data HA4-5 eps HA4-53 eps Transport units for shipping (plan view) T T With individual panel T T B B B B 3 B B3 B With combinations of different individual panels 3 4 5 Transport of individual panels Panel type Cable switch panel Fuse switch panel Fuse panel Cable connection panel Cable grounding panel CS CS FS FS FS3 FU FU FU3 CC CC CG CG Weight kg/lb 80/397 05/45 05/45 30/507 50/55 60/353 85/408 0/463 45/30 70/375 80/397 05/45 Width B mm / inch 375 / 4.8 500 / 9.7 375 / 4.8 500 / 9.7 750 / 9.5 375 / 4.8 500 / 9.7 750 / 9.5 375 / 4.8 500 / 9.7 375 / 4.8 500 / 9.7 Height H mm / inch 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 50 / 88.6 Depth T mm / inch 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 30 / 48.4 Metering panel MT3 40/96 750 / 9.5 50 / 88.6 30 / 48.4 Metering cable panel MC3 40/96 750 / 9.5 50 / 88.6 30 / 48.4 Metering switch panel MS MS3 350/77 40/96 500 / 9.7 750 / 9.5 50 / 88.6 50 / 88.6 30 / 48.4 30 / 48.4 Bus riser panel BR BR 45/30 70/375 375 / 4.8 500 / 9.7 50 / 88.6 50 / 88.6 30 / 48.4 30 / 48.4 Busbar grounding panel BG 80/397 375 / 4.8 50 / 88.6 30 / 48.4 Transport of combinations of different individual panels Transport unit Overall width B3 Weight * Width B Height H ** Depth T Volume B x H x T mm / inch kg/lb mm / inch mm / inch mm / inch m 3 /yd 3 Transport unit w 750 / 9.5 70/55 00 / 43.3 450 / 96.5 400 / 56. 3.8 / 5.0 Transport unit w 750 / 58.9 0/65 00 / 86.6 450 / 96.5 400 / 56. 7.6 / 0.0 Top case necessary for cable top entry, delivered in accessory bag T = Depth of individual panel Individual panel dimension B x T 3 Transport unit, dimension B x T 4 B3 = Overall width of combination of different individual panels 5 B = Width of the transport unit Packing, transport (examples) Packing Version For supply Transport Panels mounted on wooden floor For container Overseas Ship + truck and covered with protection sheeting * Additional packing weight in kg/lb (without weight of panels) ** Transport unit for air freight, height H 60 mm/0.8 inch and width B 700 mm/66.9 inch Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 7
R-HA4-089 eps R-HA4-088 eps R-HA4-087 eps Product Range Product range overview Standard panels Panel designation Panel type Panel width Column No. Cable switch panel type CS Cable switch panel Fuse switch panel CS 375 mm / 4.8" CS 500 mm / 9.7" FS 375 mm / 4.8" FS 500 mm / 9.7" Fuse switch panel type FS Fuse panel Cable connection panel Cable grounding panel (= cable connection panel with grounding switch) Metering panel Metering cable panel Metering switch panel FS3 750 mm / 9.5" FU 375 mm / 4.8" FU 500 mm / 9.7" FU3 750 mm / 9.5" CC 375 mm / 4.8" CC 500 mm / 9.7" CG 375 mm / 4.8" CG 500 mm / 9.7" MT3 750 mm / 9.5" MC3 750 mm / 9.5" MS 500 mm / 9.7" MS3 750 mm / 9.5" Bus riser panel Busbar grounding panel BR 375 mm / 4.8" BR 500 mm / 9.7" BG 375 mm / 4.8" Cable connection panel type CC 8 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Product Range Equipment features Two-position switch-disconnector (CLOSED-OPEN) Three-position switch-disconnector (CLOSED-OPEN-GROUNDED) Grounding switch (GROUNDED-OPEN) Manual operating mechanism Manual operating mechanism with stored-energy mechanism Stored-energy mechanism operated by shunt release Stored-energy mechanism electrical tripping by time delay relay Stored-energy mechanism mechanical tripping by a device Signal switch (NO) for remote electrical ready-for-service indication Signal switch fuse blown Auxiliary switch (CLOSED-OPEN-GROUNDED) Motor operating mechanism (CLOSED-OPEN) Local remote switch Cable compartment cover with inspection window Cable compartment cover with infrared window Interlocking de-grounding if the door is open Interlocking closing possible if the door is open Interlocking closing the disconnector switch is only possible if the fuse is installed and intact C-rail to fix cable C-rail with brackets to fix cable Floor cover Heating Heating with thermostat Heating with humidistat Panel type 3 4 5 6 7 8 9 0 3 4 5 6 7 8 9 0 3 4 CS CS FS FS FS3 FU FU FU3 CC CC CG 7 ) CG 7 ) MT3 MC3 MS MS3 BR BR BG Basic equipment Additional (optional) equipment Not Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 9
Product Range Cable switch panel Cable switch panel as feeder panel Cable switch panel as transfer panel * Three-position switch-disconnector HA4-54 eps HA4-55 eps HA4-56 eps * Three-position switch-disconnector Capacitve voltage detection system Surge arrester Cable ( included in the scope of supply) Type CS Type CS Type CS nd cable ( included in the scope of supply) HA4-608.eps Cable-type current transformer HA4-57 eps HA4-58 eps HA4-59 eps Type CS Type CS Type CS Note: For detailed design, please contact your local Siemens partner. * Switch-disconnector as: two-position switch-disconnector three-position switch-disconnector 0 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Product Range Fuse switch panel Fuse switch panel as feeder panel Fuse switch panel as transfer panel * Three-position switch-disconnector HA4-50 eps HA4-5 eps HA4-5 eps * Three-position switch-disconnector Capacitve voltage detection system DS DS DS Surge arrester Discharge switch Type FS Type FS Type FS HV CL fuse nd HV CL fuse nd and 3 rd HV CL fuse DS DS DS Cable ( included in the scope of supply) nd cable ( included in the scope of supply) HA4-53 eps HA4-54 eps HA4-55 eps nd and 3 rd cable ( included in the scope of supply) Type FS Type FS Type FS HA4-608.eps Cable-type current transformer Note: For detailed design, please contact your local Siemens partner. * Switch-disconnector as: two-position switch-disconnector three-position switch-disconnector Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Product Range Fuse panel Fuse panel as feeder panel Fuse panel as transfer panel Capacitve voltage detection system HA4-56 eps HA4-57 eps HA4-58 eps Surge arrester Grounding stud either... HV CL fuse... or nd HV CL fuse nd and 3 rd HV CL fuse Type FU Type FU Type FU Cable ( included in the scope of supply) either...... or nd cable ( included in the scope of supply) nd and 3 rd cable ( included in the scope of supply) HA4-59 eps HA4-530 eps HA4-53 eps HA4-608.eps Cable-type current transformer Type FU Type FU Type FU Note: For detailed design, please contact your local Siemens partner. Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Product Range Cable connection panel Cable connection panel as feeder panel Capacitve voltage detection system HA4-53 eps Surge arrester Grounding stud Cable ( included in the scope of supply) nd cable ( included in the scope of supply) Type CC HA4-608.eps HA4-535 eps Cable-type current transformer Type CC Note: For detailed design, please contact your local Siemens partner. Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 3
Product Range Cable grounding panel, busbar grounding panel Cable grounding panel (= cable connection panel with grounding switch) Cable grounding panel/busbar grounding panel (with grounding switch) Capacitve voltage detection system HA4-536 eps HA4-537 eps HA4-538 eps Surge arrester Grounding switch Cable ( included in the scope of supply) nd cable ( included in the scope of supply) Type CG Type CG Type CG HA4-608.eps Cable-type current transformer HA4-539 eps HA4-540 eps HA4-54 eps Type CG Type CG Type CG Note: For detailed design, please contact your local Siemens partner. 4 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Product Range Metering panel Metering panel Capacitve voltage detection system HA4-54 eps HA4-543 eps Grounding stud either...... or either...... or Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) Type MT3 Type MT3 Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) HA4-544 eps HA4-545 eps Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) either...... or either...... or Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) Type MT3 Type MT3 HA4-608.eps Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) Note: For detailed design, please contact your local Siemens partner. Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 5
Product Range Metering panel with cable Metering panel with cable Capacitve voltage detection system HA4-546 eps HA4-547 eps Grounding stud Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) Type MC Type MC Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) HA4-548 eps HA4-549 eps Surge arrester Cable ( included in the scope of supply) HA4-608.eps nd cable ( included in the scope of supply) Type MC Type MC HA4-550 eps HA4-55 eps Type MC Type MC Note: For detailed design, please contact your local Siemens partner. 6 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Product Range Metering panel with cable (continued), metering switch panel Metering panel with cable * HA4-55 eps HA4-553 eps Three-position switch-disconnector * Three-position switch-disconnector Capacitve voltage detection system Grounding stud Type MC Type MC Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) Metering switch panel Block-type current-transformer 4MA and voltage transformer 4MR (both cast-resin insulated) HA4-554 eps HA4-555 eps HA4-556 eps Surge arrester HV CL fuse *** Option ** Option ** Option ** Voltage transformer 4MR (cast-resin insulated) VT CPT VT CPT VT CPT Control power transformer (CPT) make ITI Type MS Type MS Type MS Cable ( included in the scope of supply) HA4-608.eps nd cable ( included in the scope of supply) * Switch-disconnector as: two-position switch-disconnector three-position switch-disconnector ** Only in combination with VT or CPT *** Fuses: Potential transformer fuses type CAV Note: For detailed design, please contact your local Siemens partner. Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 7
Product Range Bus riser panel, busbar grounding panel HA4-557 eps Bus riser panel HA4-558 eps Capacitve voltage detection system Grounding stud HA4-608.eps Grounding switch Type BR Type BR Busbar grounding panel HA4-559 eps HA4-560 eps HA4-56 eps Type BG Type BG Type BG HA4-56 eps HA4-563 eps HA4-564 eps Type BG Type BG Type BG Note: For detailed design, please contact your local Siemens partner. 8 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Design Panel design (examples) Cable switch panel type CS Fuse switch panel type FS HA4-565a eps 7 8 9 0 3 4 3 5 4 6 5 6 4 7 8 9 0 3 4 5 6 7 8 9 30 3 3 0 HA4-566a eps 7 8 9 0 3 4 3 5 4 6 5 6 4 7 8 9 36 3 4 5 6 7 8 9 30 3 36 34 34 35 33 0 33 Type CS Section Type FS Section 6 HA4-567a eps Metering panel type MT 7 35 6 4 7 8 9 37 38 39 Type MT3 Section 3 4 35 9 3 37 38 39 33 Legend Indicator Fuse intact/fuse blown Switch position indicator 3 View port for switch blade position 4 Sockets for capacitive voltage detection system 5 Information label for view port 6 Mimic diagram 7 Warning label 8 Gas-insulated vessel for switching device 9 Manual operation for the mechanism of the load-breakdisconnecting function 0 Ready-for-service indicator for switching device Manual operation for the mechanism of the grounding function Interlocking lever of cable compartment cover (option) 3 Option: Locking device for three-position switch 4 Pressure relief device for switching device 5 Metal compartmentalization of cable connection compartment 6 Rating and type plate 7 Option: Local-remote switch and momentary-contact rotary control switch CLOSED-OPEN for the motor operating mechanism 8 Feeder designation label 9 Pressure relief duct 0 Cable termination ( incl. in scope of supply) Cable bracket with clamps Cable connection compartment 3 Busbar 4 Insulating cap on busbar (for>5kv) 5 Bushing-type insulator for busbar 6 Metal compartmentalization of busbar compartment 7 Spring-operated mechanism for three-position switch 8 Three-position switch 9 Grounding busbar 30 Bushing-type insulator for feeder 3 Cable connection 3 Cable compartment: Ascoverordoor (latched or screwed-on) 33 Grounding connection 34 Grounding switch to discharge capacitance of connected transformers 35 Post insulator 36 HV CL (current limiting) fuse 37 4MA7 block-type current transformer 38 Fuse holder for VT fuse 39 4MR voltage transformer Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 9
R-HA35-047 eps Components Two/three-position switch-disconnector Characteristics Switch positions: CLOSED-OPEN or CLOSED-OPEN-GROUNDED Designed as a multi-chamber switch incorporating the following functions Switch-disconnector and Make-proof grounding switch Operation via gas-tight welded bushing at the front of the switchgear vessel Switching functions as general purpose switchdisconnector according to ANSI/IEEE C37.0.3 * Three-position switch-disconnector Switch shaft Fixed contact Arcing chamber Moving contact, complete Compression vane (with nozzle) Exploded view Mode of operation The switch shaft with the moving contacts rotates inside the chamber containing the fixed contacts. Switching functions Compression vanes, which rotate in conjunction with the switch shaft, divide the arcing chamber into two subchambers each of which changes in conjunction with the rotation. During the switching movement, the compression vanes generate a pressure difference between the subchambers. The SF 6 gas flows through a nozzle, causes a directional blow-out of the breaking arc and quenches it rapidly. Interlocking is necessary as the CLOSED and GROUNDED functions can be implemented simultaneously. R-HA4-090 eps HA4-568 eps R-HA4-09 eps R-HA4-09 eps Control board with switch position indicators for detachable lever mechanism Switch positions: Three-position switch-disconnector CLOSED OPEN GROUNDED 3 Switch positions of three-position switch-disconnector CLOSED OPEN GROUNDED Switch positions of two-position switch-disconnector Legend Moving contact Fixed contact for GROUNDED 3 Fixed contact for CLOSED CLOSED OPEN * Standards see page 40 0 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Components Two/three-position switch as two/three-position switch-disconnector Common features Metal-enclosed Located in a gas-insulated switchgear vessel Switch positions: CLOSED-OPEN or CLOSED-OPEN- GROUNDED No cross insulation between phases Two/three-position switch with air-insulated primary connections for busbar and feeder Operation via a gas-tight welded-in metal bellows in the frontoftheswitchgear vessel Two/three-position switch-disconnector 600 A Up to 600 A With gas-insulated, maintenance-free quenching principle Operating mechanism Spring-operated mechanism with detachable lever Manual operation with the aid of a detachable lever Options: Mechanical ready-forservice indication Auxiliary switch Motor operating mechanism for switch-disconnector Locking device Spring-operated/storedenergy mechanism for transformer panel type FS 3 R-HA4-093 eps 4 Three-position switch-disconnector 600 A (side removed for photo) 5 6 View port The visual inspection of the actual position of the two/three-position switch is possible via a view port. (Fig. shown on the right) Interlocks Opening of panel cover or cable compartment cover only in GROUNDED position Operating cycles Capable of 00 operating cycles at rated continuous current 600 A Mechanical endurance of 000 operating cycles HA4-569a eps Bushing-type insulator for busbar Switchgear vessel for gas insulation 3 Three-position switch-disconnector 4 Bushing-type insulator for feeder 5 Spring-operated mechanism with detachable lever 6 View port 7 CLOSED Switch positions of three-position switch: OPEN GROUNDED Detachable lever mechanism with three-position switch-disconnector 7 Operating lever, inserted Switching functions of the three-position switch-disconnector 600 A Switching and disconnecting under load General-purpose switching function Make-proof grounding function View port 3 Legend for view port Moving contact Fixed contact for CLOSED 3 Fixed contact for GROUNDED HA4-570b eps Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Components Busbars, HV CL (current-limiting) fuse assembly Busbars Metal-enclosed busbar compartment Three-pole design, bolted from panel to panel Easy switchgear extension Made of copper: Round-edge copper for up to 00 A Option: Shrink-on sleeve HV CL fuse assembly For fuse panel type FS Forbusbarvoltagemetering panel type MS HV CL fuse links acc. to ANSI/IEEE C3/C36 * As short-circuit protection before transformers With selectivity (depending on correct selection) to upstream and downstream connected equipment Requirements fulfilled as HV alternating current switch fuse combination Selection of HV CL fuses for transformers Fuse replacement possible only when feeder is grounded Option: Shunt release on operating mechanism of two/three-position switchdisconnector Option: Tripped indication of two/three-position switch-disconnector in transformer feeder (transformer switch) for remote electrical indication with one normally-open contact (NO) R-HA4-094 eps R-HA4-095 eps Busbars Busbar Bushing-type insulator for busbar Busbar compartment extending over panels, example (side view) HV HRC fuse assembly Control board of a fuse panel Displays Fuse intact Fuse blown HV CL fuse tripped Following the tripping of an HV CL fuse link, the mechanism for charging the spring must be set to the OPEN position Subsequently, grounding can be implemented by means of the two/threeposition switch-disconnector and e.g., the fuse can be replaced. 3 HV CL fuse 4 Lower fuse holder 5 Grounding stud 6 Cable termination ( included in the scope of supply) Replacement of HV CL fuse links 3 Isolating and grounding of the transformer feeder 4 Subsequent manual replacement of the HV CL fuse links 5 6 R-HA4-096 eps * Standards see page 40 HV CL fuses in fuse panel type FS (side view, sets of fuses shown) Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Components Allocation of HV CL fuses and transformers The table opposite shows the recommended fuse links (electrical data valid for ambient temperatures of up to 40 o C/ 04 F)forthefuseprotection of transformers Recommendation The two/three-position switchdisconnector in the transformer feeder (transformer switch) is combined with Bussmann fuse links. Dimensions according to DIN standards (especially manufactured for Siemens) Standards HV CL fuse links according to ANSI/IEEE C3/C36 * Bussmann fuses Rated Length voltage kv 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 mm / inch 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 537 /.4 537 /.4 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 44 / 537 /.4 537 /.4 537 /.4 537 /.4 537 /.4 537 /.4 537 /.4 537 /.4 537 /.4 537 /.4 Diameter mm / inch 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 76 / 3.0 76 / 3.0 76 / 3.0 76 / 3.0 76 / 3.0 76 / 3.0 76 / 3.0 76 / 3.0 88 / 3.5 88 / 3.5 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 76 / 3.0 76 / 3.0 76 / 3.0 76 / 3.0 88 / 3.5 88 / 3.5 88 / 3.5 5 /.0 5 /.0 5 /.0 5 /.0 5 /.0 88 / 3.5 88 / 3.5 88 / 3.5 Rated current I A 0 5 0 5 30 40 50 65 80 00 5 50 75 00 50 300 350 400 450 75 00 0 5 0 5 30 40 50 65 80 00 5 50 0 5 0 5 30 40 50 65 Power loss W 8 5 7 7 36 44 53 69 94 03 6 39 47 6 67 83 77 38 30 3 4 47 79 95 30 6 69 03 7 4 44 50 67 87 03 40 Panel type ** FS/FU FS/FU FS3/FU3 Permissible continuous current A A A 0 5 0 5 30 40 50 65 80 00 0 50 64 83 0 4 69 30 35 67 65 0 5 0 5 30 40 50 59 73 85 3 0 5 0 5 30 40 50 65 8 7 36 45 54 7 90 7 44 80 0 70 9 37 390 49 478 536 575 30 305 8 7 36 45 54 7 90 04 3 55 07 38 8 7 36 45 54 7 90 7 4 36 48 60 7 96 0 56 9 40 300 360 46 466 555 598 600 600 600 40 430 4 36 48 60 7 69 0 49 86 5 9 336 4 36 48 60 7 96 0 56 Code/reference No. for SIMOSEC ANSI 55GDMSJ0ES 55GDMSJ5ES 55GDMSJ0ES 55GDMSJ5ES 55GDMSJ30ES 55GDMSJ40ES 55GDMSJ50ES 55GDMSJ65ES 55GDMSJ80ES 55GDMSJ00ES 55GDMSJ5ES 55GDMSJ50ES 55GDMSJ75ES 55GDMSJ00ES 55GDMSJ50ES 55GDMSJ300ES 55GDMSJ350ES 55GDMSJ400ES 55GDMSJ450ES 75GXQSJ75ES 75GXQSJ00ES 75GDMSJ0ES 75GDMSJ5ES 75GDMSJ0ES 75GDMSJ5ES 75GDMSJ30ES 75GFMSJ40ES 75GFMSJ50ES 75GFMSJ65ES 75GXMSJ80ES 75GXMSJ00ES 75GXQSJ5ES 75GXQSJ50ES 58GDQSJ0ES 58GDQSJ5ES 5GDQSJ0ES 5GDQSJ5ES 5GDQSJ30ES 5GDQSJ40ES 5GDQSJ50ES 5GDQSJ65ES * Standards see page 40 ** FS/FU: Single fuse FS/FU: Two fuses in parallel FS3/FU3: Three fuses in parallel Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 3
R-HA4-097 eps R-HA4-098 eps Components Operating mechanisms for two/three-position switches Manual operating mechanism Standard: As detachable lever mechanism Spring-operated mechanism For cable-switch panel type CS For all two/three-position switches (except in panel type FS) Spring-operated /storedenergy mechanism For fuse panel type FS as wellasforbusbarvoltage metering switch panel type MS The two/three-position switch is operated via a rocker with metal bellows which is gas-tight and welded at the switchgear vessel. Motor operating mechanism (option) The manual operating mechanisms can be equipped with motor operating mechanisms for the two/three-position switch-disconnector. Operating voltages for motor operating mechanisms: 4, 48, 60, 5 V DC 50/60 Hz 0 and 40 V AC Electrical operation: Standard: Remote operation (applied to terminal) Option: Local operation by momentary-contact rotary control switch Shunt release (option) Spring-operated/storedenergy mechanisms can be equipped with a shunt release. Remote electrical tripping of the two/threeposition switch-disconnector is possible via the magnetic coil of the shunt release, e.g., transformer overtemperature tripping. To avoid thermal overloading of the shunt release in the event of a continuous signal that may be applied, the shunt release is switched off via an auxiliary switch which is mechanically coupled with the three-position switchdisconnector. Auxiliary switch (option) Each operating mechanism of the two/three-position switch-disconnector can be optionally equipped with an auxiliary switch for the switch position indication: Function switch-disconnector or disconnector: CLOSED and OPEN: NO + NC Function grounding switch at the two/threeposition switch: CLOSED and OPEN: NO + NC 3 4 5 6 7 8 9 Operating mechanisms Detachable lever mechanism as spring-operated/ stored-energy mechanism Detachable lever mechanism as spring-operated mechanism R-HA4-099 eps Ready-for-service indicator Auxiliary switch 3 Switch position indicator for the three-position switch-disconnector 4 Locking device (standard for motor operating mechanism) 5 Operating mechanism for the three-position switch-disconnector coupled with the motor operating mechanism 6 Low-voltage niche 7 Terminal strip located in the low-voltage niche 8 M.c.b. (option) in the low-voltage niche 9 Local-remote switch (option) 0 Actuation for the motor operating mechanism of the three-position switch-disconnector 0 Operating mechanism parts in panel types FS (transformer feeders) Abbreviations: NO = normally-open contact NC = normally-closed contact Technical data of the auxiliary switch Breaking capacity AC operation at DC operation 50 Hz to 60 Hz Operating Normal voltage current Operating Normal current voltage resistive inductive: T=0 ms V A V A A up to 40 0 4 0 0 48 0 9 60 9 7 0 5 4 5 5 4 40.5 Rated switching capacity Rated insulation voltage 50 V AC/DC Insulation group C to VDE 00 Continuous current 0 A Making capacity 50 A 4 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
R-HA40-088 eps Components Indicating and measuring equipment Ready-for-service indicator (option for three-position switch) Self-monitoring; easy to read Independent of temperature and pressure variations Independent of site altitude Only responds to changes in gas density Option: Alarm switch NO contact Mode of operation For the ready-for-service indicator, a gas-tight measuring box is installed on the inside of the switchgear vessel. A coupling magnet, which is fitted to the bottom end of the measuring box, transmits its position to an outside armature through the stainless steel switchgear vessel. This armature moves the ready-for-service indicator of the switchgear. While changes in the gas density during the loss of gas, which are decisive for the insulating capacity, are displayed, temperaturedependent changes in the gas pressure are. The gas in the measuring box has the same temperature as that in the switchgear. The temperature effect is compensated via the same pressure change in both gas volumes. Voltage detection systems For voltage detection according to IEC 6 43-5 / VDE 068-45 Plug-in voltage detection systems Standard: HR system Features of the HR system Voltage indicator HR system (standard) Verification of safe isolation from supply phase by phase through insertion in each socket pair Voltage indicator flashes if high voltage is present For continuous operation Safe-to-touch Measuring system and voltage indicator can be tested Fixed-mounted capacitive voltage divider in bushings Without auxiliary power Mountingofvoltage detection systems See Product range pages 0 to 8 Verification of correct terminal-phase connections Possible by means of a phase comparison test unit (optional) Safe-to-touch handling of the phase comparison test unit by inserting it into the capacitive taps (socket pairs) of the switchgear Indicating and measuring equipment (examples) Control board of a ring-main panel (example) Mounting locations in the control board for Ready-for-service indicator (option) Voltage indicator, HR system, plugged-in (standard) R-HA4-00 eps Voltage indicator, HR system (standard) HA4-57 eps 3 4 5 6 3 Measuring box 4 Magnetic coupling 5 Red indication: ready for service 6 Green indication: ready for service Stainless-steel vessel filled with SF 6 gas, gauge pressure 50 kpa (7.5 psi) at 0 C Ready-forservice indicator Principle of operation of gas monitoring with ready-for-service indicator Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 5
R-HA4-04 eps R-HA4-0 eps Components 4MC70 33 cable-type current transformers Application For cable panel types CS, CC, CG For fuse panel types FS, FU Features According to ANSI / IEEE C57.3 Designed as a single-pole ring-core current transformer Only for shielded cables Climate-independent Free of dielectrically stressed cast-resin parts (due to design) Inductive type Secondary connection by means of a terminal strip inside the panel H 4MC7033cable-type current transformer, 4 different overall heights Installation Arranged on the cable at the panel connection Transformers mounted on a supporting plate at the factory; final assembly on the cables at site 4MC7033cable-typecurrenttransformers on the cable at the panel connection ** Technical data MC70 33 cable-type current transformer Primary data Max. equipment operating voltage U m Rated current I N Rated short-duration power-frequency withstand voltage (winding test) Rated thermal short-time withstand current I th Rated continuous thermal current I D Rated peak withstand current I dyn 0.60 kv 30 A to 600 A 3kV 5 ka.0 x I N option:. x I N unlimited Secondary data Rated current 5 A Measuring core Class *** 0.3 0.6. Burden 0. VA to.8 VA Protection core Class *** C0... C00 Dimensions Overall height H mm 50* 00* 70* 85* Outside diameter Ø 45 mm / 5.7 inch Inside diameter Ø 55 mm /. inch For cable diameter Ø 36... 50 mm /.4....0 inch * Depending on the core data ** Assembly normally under the panel floor *** Accuracy class varies according to CT data Other values on request 6 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
R-HA4-09a eps R-HA4-030a eps R-HA4-0 eps Components 4MA7 block-type current transformers and 4MR voltage transformers Application For metering panel types MT, MS, MC Features 4MA7 current transformer According to ANSI / IEEE C57.3 Dimensions according to DIN 4600-8 Designed as a single-pole indoor block-type current transformer Cast-resin insulated Secondary connection by means of screw-type terminals 4MR voltage transformer According to ANSI / IEEE C57.3 Dimensions according to DIN 4600-9 (small model) Designed as an indoor voltage transformer: Type 4MR, single-pole Option: Type 4MR, two-pole Cast-resin insulated Secondary connection by means of screw-type terminals 4MA7 blocktype current transformer, single-pole 4MR4 voltage transformer, single-pole 4MR voltage transformer and 4MA7 block-type current transformer installed in metering panel Technical data 4MA7 single-pole block-type current transf. 4MR single-pole voltage transformer Primary data Max. equipment operating voltage U m Rated short-duration power-frequency withstand voltage 5.5 kv 7.6 kv 34 kv ) 40 kv ) 36 kv ) 60 kv ) Rated lightning impulse 95 kv 5 kv withstand voltage U p Rated current I N Rated thermal short-time withstand current I th Rated continuous thermal current I D 50 A to 600 A > 600 A: on request up to 5 ka up to.0 x I N option:. x I N Max. equipment operating voltage U m Rated shortduration powerfrequency withstand voltage 5.6 kv 9.5 kv 5.5 kv 5.5 kv B 6 kv ) 6 kv ) 0 kv ) 8 kv ) 34 kv ) 36 kv ) 40 kv ) 60 kv ) Rated lightning 60 kv 75 kv 95 kv 5 kv impulse withstand voltage U p B On request: operating voltage U m > 5.5 kv, e.g. 7.6 kv ) Acc. to ANSI/IEEE C57.3 (standard) ) Option: on request 3) Accuracy class varies according to CT data R. peak withst. current I dyn max..5 x I th Secondary data Rated current 5 A Measuring core Class 3) 0.3 0.6. Burden 0.to.8VA Protection core Class 3) C0... C00 Other values on request Rated voltage Rated voltage for auxiliary winding 00/ 3 V 0/ 3 V 0/ 3 V 00/3 V 0/3 V 0/3 V Burden 5... 00 VA Class 0.3 0.5. Other values on request Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 7
Components Cable connection General features Cable termination points are arranged one behind the other Cable connection (examples) Uniform cable connection height per panel (see dimension drawings) L3 L L L3 L L With cable bracket or cable clamps and grounding points for cable shields 3 Access to the cable connection compartment only when feeder has been grounded 4 Features for cable terminals For thermoplastic-insulated cables For paper-insulated massimpregnated cables For connection crosssections (cable size) * up to 300 mm (600 kcmil) Cable bottom entry from below (standard) Cable top entry from above (optional) R-HA4-03 eps Cable switch panel type CS Cable connection compartment as delivered R-HA4-05 eps Cable connection compartment with cable termination 5 R-HA4-04 eps R-HA4-06 eps Fuse panel type FS Cable connection compartment as delivered Cable connection compartment with cable termination * Larger connection cross-sections on request. Legend As delivered condition for cable termination As delivered condition, prepared for cable termination 3 Cold shrink brand 3M 4 Cable termination brand 3M or Tyco Electronics Raychem 5 Cable termination brand 3M or Tyco Electronics Raychem (with cold shrink brand 3M) 8 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Components Selection data for various cable terminations Paneltype CS+ FS++3 FU++3 CC+ CG+ MC3 Top cable entry Main switch or vertical copper bar in upper position (fuse assembly in lower position) Main switch or vertical copper bar in lower position (fuse assembly in upper position) Cable termination height in mm/inch 490/ 9.3 Middle cable connection to top 940/ 37 to bottom 40/ 48.8 Bottom cable entry Main switch or vertical copper bar in upper position (fuse assembly in upper position) Main switch or vertical copper bar in upper position (fuse assembly in lower position) 490/ 9.3 Panel height in mm/inch 550/ 00.4 50/ 88.6 50/ 88.6 50/ 88.6 Cable termination height in mm/inch 490/ 9.3 490/ 9.3 Panel height in mm/inch 550/ 00.4 50/ 88.6 Cable termination height in mm/inch 490/ 9.3 490/ 9.3 940/ 37 40/ 48.8 490/ 9.3 Panel height in mm/inch 550/ 00.4 550/ 00.4 50/ 88.6 50/ 88.6 50/ 88.6 Cable termination height in mm/inch 490/ 9.3 940/ 37 40/ 48.8 490/ 9.3 Panel height in mm/inch 550/ 00.4 50/ 88.6 50/ 88.6 50/ 88.6 Cable termination height in mm/inch 490/ 9.3 940/ 37 40/ 48.8 490/ 9.3 Panel height in mm/inch 550/ 00.4 50/ 88.6 50/ 88.6 50/ 88.6 Cable termination height in mm/inch 530/ 0.8 490/ 9.3 Panel height in mm/inch 50/ 88.6 50/ 88.6 Principle of cable connection (dimensions in mm/inch) (e.g. for panel type CS) 5/4.9 5/4.9 Æ30/5. HA4-57 eps L=max. 40/6.5 Æ00/3.9 HA4-573 eps L=max. 40/6.5 Æ30/5. HA4-574 eps L=max. 40/6.5 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 9
Dimensions Cable switch panel types CS (dimensions in mm/inch) 48 5.8 370.5/4.6 HA4-575a eps 40/48.8 87.5 87.5 87.5 05 8. 0 0 375/4.8 Type CS 500/9.7 Type CS 50/ 50 000/39.4 30/48.4 87.5 87.5 87.5 05 8. 0 0 48 5.8 940/37 HA4-576a eps 443/ 375/4.8 Type CS 500/9.7 Type CS 50/ 50 000/39.4 30/48.4 Legend Available mounting depth in the LV niche 30 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Dimensions Fuse switch panel types FS (dimensions in mm/inch) 48 5.8 HA4-577a eps 443/ 87.5 87.5 87.5 = = 87.5 05 8. 0 0 490/9.3 375/4.8 500/9.7 Type FS Type FS Type FS3 750/9.5 50/ 50 000/39.4 30/48.4 48 5.8 370.5/4.6 HA4-578a eps 87.5 87.5 87.5 87.5 = = 87.5 05 8. 0 0 490/9.3 375/4.8 Type FS 500/9.7 Type FS Type FS3 750/9.5 50/ 50 000/39.4 30/48.4 3 87.5 87.5 87.5 87.5 = = 87.5 05 8. 0 0 490/9.3 48 5.8 550/00.4 550/00.4 550/00.4 443/ Legend Available mounting depth in the LV niche HA4-579b eps 375/4.8 500/9.7 750/9.5 Type FS Type FS Type FS3 50/ 50 000/39.4 30/48.4 Screwed-on door (fuse compartment) 3 Topcaseforcabletopentry Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 3
Dimensions Fuse panel types FU (dimensions in mm/inch) 08/4.3 457/8 HA4-580a eps 87.5 87.5 87.5 87.5 = = 87.5 05 8. 0 0 490/9.3 375/4.8 500/9.7 750/9.5 Type FU Type FU Type FU3 50/ 50 000/39.4 30/48.4 3 87.5 87.5 87.5 87.5 = = 87.5 05 8. 0 0 490/9.3 08/4.3 HA4-58b eps 550/00.4 550/00.4 550/00.4 457/8 375/4.8 Type FU 500/9.7 Type FU Type FU3 750/9.5 50/ 50 000/39.4 30/48.4 08/4.3 05 8. 0 0 457/8 Legend Available mounting depth in the LV niche HA4-58a eps 375/4.8 500/9.7 750/9.5 Type FU Type FU Type FU3 50/ 50 000/39.4 30/48.4 Screwed-on door (fuse compartment) 3 Topcaseforcabletopentry 3 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Dimensions Cable connection panel types CC (dimensions in mm/inch) 08/4.3 40/48.8 HA4-583b eps 457/8 87.5 87.5 87.5 05 8. 0 0 375/4.8 Type CC 500/9.7 Type CC 50/ 50 000/39.4 50/45.3 87.5 87.5 87.5 05 8. 0 0 08/4.3 940/37 457/8 Legend HA4-584b eps 375/4.8 Type CC 500/9.7 Type CC 50/ 50 000/39.4 50/45.3 Available mounting depth in the LV niche Screwed-on cover Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 33
Dimensions Cable grounding panel types CG (dimensions in mm/inch) 48 5.8 370.5/4.6 HA4-585b eps 40/48.8 87.5 87.5 87.5 05 8. 0 0 375/4.8 Type CG 500/9.7 Type CG 50/ 50 000/39.4 50/45.3 87.5 87.5 87.5 05 8. 0 0 48 5.8 443/ 940/37 Legend HA4-586b eps 375/4.8 Type CG 500/9.7 Type CG 50/ 50 000/39.4 50/45.3 Available mounting depth in the LV niche Screwed-on cover 34 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Dimensions Metering panel type MT3, metering switch panel types MS (dimensions in mm/inch) 08/4.3 08/4.3 HA4-587b eps 457/8 65 6.5 50 9.8 50 9.8 750/9.5 50/ 50 000/39.4 50/45.3 08/4.3 457/8 65 6.5 50 9.8 50 9.8 HA4-589b eps 750/9.5 Type MT3 50/ 50 000/39.4 50/45.3 HA4-59b eps HA4-588b eps 457/8 65 6.5 50 9.8 50 9.8 Type MT3 Type MT3 750/9.5 50/ 50 000/39.4 50/45.3 Legend Available mounting depth in the LV niche Screwed-on cover 05 8. 0 0 48 5.8 370/4.6 05 8. 0 0 48 5.8 370/4.6 65 6.5 50 9.8 50 9.8 HA4-590b eps 750/9.5 50/ 50 000/39.4 50/45.3 750/9.5 50/ 50 000/39.4 50/45.3 Type MS (with voltage transformer 4MR) Type MS3 (with control power transformer make ITI) Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 35
Dimensions Metering cable panel type MC3 (dimensions in mm/inch) 97.5.7 65 6.5 50 9.8 50 9.8 530/0.8 457/8 08/4.3 HA4-59b eps 750/9.5 Type MC3 50/ 50 000/39.4 50/45.3 08/4.3 457/8 HA4-593b eps 307.5. 97.5.7 65 6.5 50 9.8 50 9.8 580/.8 750/9.5 Type MC3 50/ 50 000/39.4 50/45.3 97.5.7 307.5. 65 6.5 50 9.8 50 9.8 530/0.8 457/8 08/4.3 HA4-594b eps 750/9.5 Type MC3 50/ 50 000/39.4 50/45.3 Legend Available mounting depth in the LV niche Screwed-on cover 36 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Dimensions Bus riser panel types BR (dimensions in mm/inch) 08/4.3 HA4-595b eps 457/8 375/4.8 Type BR 500/9.7 Type BR 50/ 50 000/39.4 50/45.3 08/4.3 HA4-596b eps 457/8 375/4.8 Type BR 500/9.7 Type BR 50/ 50 000/39.4 50/45.3 08/4.3 457/8 HA4-597b eps 375/4.8 Type BR 500/9.7 Type BR 50/ 50 000/39.4 50/45.3 Legend Available mounting depth in the LV niche Screwed-on cover Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 37
Dimensions Busbar grounding panel type BG (dimensions in mm/inch) 48 5.8 443/ HA4-598b eps 375/4.8 50/ 50 Type BG 000/39.4 50/45.3 48 5.8 HA4-599b eps 443/ 375/4.8 50/ 50 Type BG 000/39.4 50/45.3 48 5.8 370.5/4.6 HA4-600b eps 375/4.8 50/ 50 Type BG 000/39.4 50/45.3 Legend Available mounting depth in the LV niche Screwed-on cover 38 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008
Dimensions Floor openings (dimensions in mm/inch in red) and fixing points For panel width 375 mm/4.8" 50/ 50/ 3 4 5 385/5. HA4-60 eps 0/4.3 0 0.8 80 3. 385/5. 58/.3 375/4.8 87.5/ 8/0.7 69.5/6.7 60/.4 55/0 58/.3 857/33.7 4 x 8/ 0.6 x. 000/39.4 850/33.5 60/.4 8 x 4/. x 0.6 Panel type CS FS FU CC CG 50/ 50/ 6 385/5. HA4-60 eps 0/4.3 0 0.8 80 3. 385/5. 58/.3 375/4.8 87.5/ 8/0.7 69.5/6.7 60/.4 55/0 58/.3 857/33.7 4 x 8/ 0.6 x. 000/39.4 850/33.5 60/.4 8 x 4/. x 0.6 Panel type BG BR Wall distance Fixing frame (base) of an individual panel or panel block 3 Floor opening for high-voltage cables and, where applicable, control cables 4 Position of the cables for the feeder 5 Fixing points 6 Floor opening if required for panels without cable connection For panel width 500 mm/9.7" 50/ 50/ 3 4 5 385/5. HA4-603 eps 0/4.3 0 0.8 80 3. 385/5. 58/.3 8/0.7 50/9.8 500/9.7 3/9. 60/.4 380/5 58/.3 857/33.7 4 x 8/ 0.6 x. 000/39.4 850/33.5 60/.4 8 x 4/. x 0.6 Panel type CS FS FU CC CG 50/ 50/ 6 385/5. HA4-604 eps 0/4.3 0 0.8 80 3. 385/5. 58/.3 8/0.7 50/9.8 500/9.7 3/9. 60/.4 380/5 58/.3 857/33.7 4 x 8/ 0.6 x. 000/39.4 850/33.5 60/.4 8 x 4/. x 0.6 Panel type BR MS For panel width 750 mm/9.5" 50/ 50/ 3 4 5 385/5. HA4-605 eps 0/4.3 50/ 50/ 3 4 5 0 0.8 80 3. 385/5. 58/.3 750/9.5 87.5/ 375/4.8 8/0.7 69.5/6.7 375/4.8 385/5. HA4-607 eps 0/4.3 60/.4 630/4.8 0 0.8 80 3. 385/5. 58/.3 750/9.5 87.5/ 375/4.8 8/0.7 69.5/6.7 375/4.8 60/.4 630/4.8 58/.3 857/33.7 4 x 8/ 0.6 x. 000/39.4 850/33.5 60/.4 8 x 4/. x 0.6 4 x 8/ 0.6 x. 857/33.7 58/.3 000/39.4 850/33.5 60/.4 8 x 4/. x 0.6 Panel type FS3 FU3 Panel type MC3 50/ 50/ 6 385/5. HA4-606 eps 0/4.3 0 0.8 80 3. 385/5. 58/.3 750/9.5 87.5/ 375/4.8 8/0.7 69.5/6.7 375/4.8 60/.4 630/4.8 58/.3 857/33.7 4 x 8/ 0.6 x. 000/39.4 850/33.5 60/.4 8 x 4/. x 0.6 Panel type MT3 MS3 Metal-Enclosed Interrupter Switchgear Type SIMOSEC, up to 7.6 kv, ANSI, Air-Insulated, Extendable Siemens HA 4.3 008 39