R 9001 luminum Sliding System
R 9001 SLID TYP: MOUNTING: Modular luminum Sliding System ottom Mount or Side Mount 50 WIDTH: 58 mm (2.28 in.) LOD PITY: dynamic up to 225 kg (500 lbs.) 68 55 5.5 5.5 MTRILS: UTION: arrier 50 40.5 55-58 68 42 42 68 55-58 55 55 Rear of cabinet Rear of slide aluminum slide 4 rollers set color must match on each side Rear of cabinet 15.5 11 Rear of slide 26.5 9 9 SID VIW 40.5 56 +0.5-0 56 +1.5-0 SID VIW Tray ottom (not supplied) 5 5 ront of slide 2 mm TURS: 11 15.5 26.5 ront of cabinet ront of slide 2 mm 0 5.5 arrier ront of cabinet arrier 68 4 order number 9200 roller set, consisting of: 2 pieces solid rollers (tolerance compensating), (red), Metric mm2 pieces ball bearing rollers, (white), 4 pieces stops, 16 pieces xtension xtension M6x20 mm bolts (DIN984), 24 pieces M6 square nuts (DIN55) Inches 0 18 20 22 24 26 28 30 32 34 36 38 40 44 48 52 56 60 64 68 2 6 80 84 88 92 Rear of 96 cabinet 0 xtension 12.6 15.4 16.8 18.2 19.6 21 22.4 23.8 25.2 26.6 28 30.8 33.6 36.4 39.2 42 44.8 4.6 50.4 53.2 56 58.8 61.6 64.4 Rear of 6.2 slide 0 2. 3.3 3.9 4.5 5.1 5. 6.3 6.9.5 8.1 8. 9.3.5 11. 12.9.1 15.3 16.5 1. 18.9 20.1 21.3 22.5 23. 24.9 26.1 2.3 Metric mm 450 500 550 600 650 00 50 800 850 900 950 00 10 1200 00 00 1500 1600 100 1800 1900 2000 20 2200 2300 2400 2500 18 20 22 xtension 24 315 26 350 28 385 30 32 420 3455 36490 38525 40 560 44 59548 630 52 665 56 00 60 0 64 68 840 29 6980 80 5084 112088 1190 92 1260 96 30 0 00 0 1540 16 1680 150 n 12.6 15.4 16.8 66 18.2 19.6 81 96 21 22.4 111 23.8 126 25.2 1 26.6156 28 10.8 186 33.6 201 36.4 216 39.2 321 42 44.8 261 4.6 291 50.4 321 53.2351 56 38158.8 41161.6 441 64.4 41 6.2 501 0 531 561 591 621 651 681 2. 3.3 3.9 4.5 5.1 5. 6.3 6.9.5 8.1 8. 9.3.5 11. 12.9.1 15.3 16.5 1. 18.9 20.1 21.3 22.5 23. 24.9 26.1 2.3 m M6 squ 450 500 550 600 650 00 50 Sold by 800 the foot, 850 21 900 feet maximum 950 00 10 1200 00 00 1500 1600 100 1800 1900 2000 20 2200 2300 2400 2500 n 315 350 385 420 455 490 525 560 595 630 665 00 0 840 9 980 50 1120 1190 1260 30 00 0 1540 16 1680 150 66 81 96 Description 111 126 1 156 11 mm 186 feet 201 216 321 261 Required 291 omponents 321 351 381 411 441 Optional 41 501 omponents 531 561 591 621 651 681 Weight Order No. Profile xtrusion 6400 21 feet Profile xtrusion * 920 50 PPLITION DVNTGS: nylon rollers and nylon-encased ball bearings xtension 4 3 components = 1 system a commonly shared extruded profile with a special interior shape in combination with roller carriers and stops offering a wide variety of applications. SPIITIONS: 4 modular Sliding System comprised of 3 aluminum components for a wide variety of applications 4 500 lbs. weight capacity for a 4 ft. long pull-out Regular xtension is approximately 0% of the NOTS: 68 length of the profile 4 the special interior shape of the profile compensates for installation inaccuracies in width, height and angular direction 4 the extruded profile is available up to 6400 mm (21 ft.) 4 simple and secure fastening of the profiles by means of the T-slots and M6 bolts 4 simple and secure fastening of the roller carriers and stops with M6 bolts 4 a recess for a M6 (DIN984) llen head bolt with a centerline groove to accurately mark the position of the holes 4 only one version of stops Scale 1mm place at 50 4 roller carrier equipped with two types of rollers: solid high-impact plastic roller with lateral play to overcome dimensional installation inaccuracies (red) and ball bearing roller with high-impact plastic (white) 4 the system R 9001 allows the fabricator to create any size pull-out from individual components it (see NOTS) it * 9200 W HRT Inches 18 20 22 24 26 xtension 12.6 15.4 16.8 18.2 2. 3.3 3.9 4.5 5.1 Profile xtrusion 6400 21 feet Profile xtrusion (Mounting or drawer construction components) * 92015 Profile xtrusion 6400 21 feet Profile xtrusion (Mounting or drawer construction components) * 92016 450 500 550 600 650 315 350 385 420 455 66 81 96 111 126 *on request 1
R 9001 SLID TYP: MOUNTING: Modular luminum Sliding System ottom Mount or Side Mount WIDTH: 58 mm (2.28 in.) LOD PITY: dynamic up to 225 kg (500 lbs.) xample R9001 Regular xtension: 2 outer profiles with 4 stops and 2 roller carriers 2 inner profiles with 2 roller carriers ll profiles have the same length, extension to one side carrier red carrier red Stationary Profile carrier white Movable Profile 1. asten stop with M6 x 20 mm bolts (DIN984) 2. Slide in roller carriers and fasten with M6 x 20 mm bolts (DIN984) 3. Slide in movable profile from the back forward 16x 24x 4. asten stop with M6 x 20 mm bolts (DIN984) Profile : Required xtrusion 32 (1.25) it: Required 2 pcs. ballbearing rollers, (white) 2 pcs. solid rollers (tolerance compensating), (red) 4 pcs. stops 16 pcs. M6 x 20 mm bolts (DIN984) 24 pcs. M6 square nuts (DIN55) Drill Ø6.5 mm (.26") holes thru Movable Profile RONT Profile xtrusion: Optional (Mounting or drawer construction components) Min. 30% of Stationary Profile RONT (.25) Drill Ø6.5 mm (.26") holes thru mm (in.) (.551) TOP VIW Left side shown (right side mirror image) Profile xtrusion: Optional (Mounting or drawer construction components)
R 9001 SLID TYP: MOUNTING: Modular luminum Sliding System ottom Mount or Side Mount WIDTH: 58 mm (2.28 in.) LOD PITY: dynamic up to 225 kg (500 lbs.) Tilt-down application with custom made brackets Horizontal pplication underneath tray Vertical pplication Profile Milling onfiguration for corner connection Profile TOP VIW Profile Pr ofile Profile can also used as a bracket for surface mounting arrier Profile Profile RONT VIW Profile xample R9001 Regular xtension: 42 outer profiles with 4 stops and 2 roller carriers 42 inner profiles with 2 roller carriers 4all profiles have the same length, extension to one side xample R9001 Regular xtension: 42 outer profiles with 4 stops 42 inner profiles with 4 roller carriers 4different lengths of profiles, extension to both sides xample R9001 Table xtension: 42 outer profiles with 6 stops 4table top with roller carriers arranged in pairs 3
R 9001 Lock & PRODUT TYP: Lock & System for R 9001 G shown closed D shown open D G MTRILS: aluminum and steel TURS: lock & stock system for use with R 9001 aluminum slide system SPIITIONS: 4 order number 92018: profile D extrusion, 6400 mm (21 feet) sold by foot or 92018 profile D extrusion I 25.4mm (1 inch) D G H 4 order number 92021: rod, steel, 6 mm diameter x 2000 mm (8 in.) long sold by piece 4 order number 9202: Lock and Set, consisting of: Rod Guide D Spring G 1 piece Lock lever (), 1 piece Release lever (), 1 Lever Rod piece Rod guide (), 2 pieces Ramp (), 1 piece Spring (G), 4 pieces Set screws M5 x 6 mm (H), 3 pieces olt Position of Spring RONT VIW SID VIW L Profile 25.4 25.4 I J I X J.5 I G 25.4 H (optional position) Profile Profile Side View ront View Inches 18 20 22 24 26 28 30 32 34 36 38 40 44 48 52 56 60 64 68 2 6 80 84 88 92 96 0 xtension 12.6 15.4 16.8 18.2 19.6 21 22.4 23.8 25.2 26.6 28 30.8 33.6 36.4 39.2 42 44.8 4.6 50.4 53.2 56 58.8 61.6 64.4 6.2 0 X 15. 1. 19. 21. 23. 25. 2. 29. 31. 33. 35. 3. 41. 45. 49. 53. 5. 61. 65. 69. 3.. 81. 85. 89. 93. 9. Metric mm 450 500 550 600 650 00 50 800 850 900 950 00 10 1200 00 00 1500 1600 100 1800 1900 2000 20 2200 2300 2400 2500 xtension 315 350 385 420 455 490 525 560 595 630 665 00 0 840 9 980 50 1120 1190 1260 30 00 0 1540 16 1680 150 X 392 442 492 542 592 642 692 42 92 842 892 942 42 12 1242 42 42 1542 1642 2 1842 1942 2042 22 2242 2342 2442 Description Note Weight Order No. kg. lbs. Lock & ( see specifications) * 9202 Profile D xtrusion, 25.4 mm (1 inch) sold by the piece * 92018 Profile D xtrusion, 6400 mm (21 feet) sold by the foot * 92018** Rod, 6 mm diameter x 200 mm (8 in.) long sold by the piece * 92021 R 9001 orner racket Description 25 (1) 90 (3.54) 90 (3.54) mm (in.) Universal orner racket shown with profile **non stocking item, inquire for lead time Universal orner racket shown with profile,,and Universal corner racket, aluminum 92020 Packing Unit: 1 piece Order No. 4
R9001 luminum Sliding System (4 T-Slots) set consists of (see illustration on page 2): 2 pieces Solid s (red), tolerance compensating 2 pieces allbearing s (white) 4 pieces s 16 pieces M6x20mm Socket Head olts The roller carriers are marked with: for ront for ack Mounting Recommendations R9001 (4 T-Slots) or the R9001 (4 T-Slots) profile this has to be reversed because the profile is a symmetric shape. This means that on the stationary profile the roller and carrier are mounted on the front and on the movable profile the roller and carrier are mounted on the back. In order to check if it is correct you must notice a slight incline of the movable profile from back to front. This compensates for the deflection under load. Please note that in each set are white and red rollers. You must use the same color roller on each side. Never use a white and red roller on the same side. ollow the included instructions to drill all holes for roller carriers and stops. 32 (1.25) Drill Ø6.5mm (.26") holes thru Movable Profile RONT Min. 30% of Stationary Profile RONT (.25) Drill Ø6.5mm (.26") holes thru mm (in.) (.551) TOP VIW Left side shown (right side mirror image) 5
... only a few exemplary versions shown. In the automotive industry and specialty vehicle industry adding weight is of the greatest concern. With the R 9001 luminum Sliding System, big loads can be moved with little effort, yet the sliding system is light weight. The R 9001 has its place where simple application, light weight and resistance to corrosion is an issue. ut at the same time high load capacity and dependability are of greatest importance. Printed in the U.S.. /20 R 9001 - another ulterer product for specialists and experts. ULTRR US IN. 542 Townsend venue High Point, N 2263-4552, US T +1 336 431-4646 T +1 800 395-4646 +1 336 431-4620 info@fultererusa.com www.fultererusa.com ULTRR US IN. 1900 Proforma venue, Unit -2 Ontario, 9161, US T +1 909 94-040 +1 909 94-0409 info@fultererusa.com www.fultererusa.com