MDT Sales Ltd. Herne House Herne Park East Road Oundle PE8 4BZ T. +44 (0) 1832273977 Robin@mdtsales.uk To the kind attention of: Mr. Robin North Date: 06 05 2015 SUBJECT: OFFER 2015-1470020 MDT Sales UK MDT60B quote 06-05-2015 Dear Sirs, Hereby we are pleased to provide you with our best offer for the multipurpose drill rig mod. MDT60B. The dressing offered is only for your initial evaluation. Other dressing can be provided. CONTENT Multipurpose Drills MDT 60 B 1
Quotation Image 2015-1470020 Multipurpose Drills MDT 60 B 2
Quotation Synthesis 2015-1470020 MDT 60 B Description Price The MDT 60 B is a powerful and very compact drill rig, developed especially for heavy site works, offers exceptional manoeuvrability, reliability and productivity, thanks to the adoption of many innovative technical solutions. 149.500,00 Download Technical Specs Download Catalogue GG50C Swivel joint Description Price Swivel joint is situated back to a floating stub-shaft of the rotary head, and is used for the low pressure fluid adduction up to 50 bar with a joint of 1 1/2 1.200,00 TP1000 Remote Control Description Price Portable remote control console, with cable transmission (length 15m); it is supplied as an optional, as an alternative to radio control. 3.290,00 RFSM-1 Clamping limiting device Description Price The device permits to control hydraulically the maximum clamping force, avoiding rods or casing s lesions. The adjustment is for both clamps at the same time. 300,00 KBC Force Balancing Kit Description Price An hydraulic device to balance the thrust force for coring use 950,00 PDA60 Big foot Description Price Positioned on the bottom of the mast in order to give more stability at the mast in case of jet grouting treatment. 1.550,00 3
VE2000K Hydraulic winch Description Winch positioned on the top of the mast, with Pulling force 2000 dan GM240M Clamps Description The clamps unit is suitable for rods with diameter from 38 to 230 mm VA60I Hydraulic-control air/mud valve Description 2 Air/mud valve with a activated through hydraulic jack with electrohydraulic control. TR14000-90-2M Rotary head Description The Rotary head is equipped with two hydraulic orbital engines of double displacement. An electrical selector, situated on the remote control desk, allows to choose between maximum or minimum displacement OL60 Line Oiler Description Line lubrication device for the emission of nebulised oil into compressed air line. PAT150-15 Water pump Description Triplex high pressure water pump complete with filter on water inlet line for use as de-coring pump and for washing operation. Maximum flow rate: 15l/min Maximum pressure: 150bar Price 5.200,00 Price 8.250,00 Price 1.350,00 Price 19.600,00 Price 3.300,00 Price 2.100,00 4
PG 1000 Protection Guard Description Price Fully compliant protection guard from entanglement 4.650,00 Total 201.240,00 Discount 15% Total with Discount 171.054,00 Extra Quote Rows GM355M Clamps Description Price Discount (%) Reducted price The clamps unit is suitable for rods with diameter from 48 to 340 mm 8.250,00 15% 7.012,50 Total 8.250,00 Total reduced extra quote cost 7.012,50 5
Conditions of Sale: 2015-1470020 Delivery: Ex Works Parma, Italy Lead Time: within 4 weeks after the down payment Validity: 30 days Color: Orange RAL 2004 Guarantee: One year from B/L Payment: Start Up: 20% at order time and remaining 80% by bank transfer before delivery 3 days of work of a MDT technician free of charge (board and lodging charged to the Customer). One week before delivery MDT is available to accommodate a Customer technician for a training on use and maintenance (accommodation is borne by MDT, the trip charged to the Customer) Mc DRILL TECHNOLOGY S.p.A. Anastasiya V. Mantsurova Area Manager tel +390521615212 cell +39 349-24-20-774 email: a.mantsurova@mdtspa.it 6
Technical Description Multipurpose Drills : MDT 60 B The MDT 60 B is a powerful and very compact drill rig, developed especially for heavy site works, offers exceptional manoeuvrability, reliability and productivity, thanks to the adoption of many innovative technical solutions. The MDT 60 B rig was made for satisfying numerous demands in search of the right equipment that would permit to implement different works in reduced space conditions. So it became possible to carry out micropiles, tie rods and consolidation rods, by using jet grouting technologies as well. High extraction force that is not affected by any reduction in cue-lift thanks to the hydraulic piston. Mast vertical axis rotation system to drill in parallel position to the crawlers. Portable electric remote-control desk, that guarantees the maximum safety condition and comfort to the operator, during placement, working phases and moving; in particular when climbing and drifting down from the transport carriage on the road. Automatic power division system in order to improve the rig s performance and maintain the productivity at a high level. Automatic devices application makes easier the use of the rig itself also by less experienced personnel. Ample oversizing of structural parts taking in consideration possible critical conditions due to eventual operator s mistakes. The drilling machine meets the CE norms, especially the UNI EN 791. Even though the dimensions remain reduced, the possibility to install the engine of 102 hp with exceptional capacity permits to reach unequalled productivity levels. For high performance the rotary may be applied, with torque max. up to 14000 Nm, without decreasing significantly the 7
rotation speed. The articulation is based on parallelogram with mast lateral positioning system. Mast rotation is moved by two independent hydraulic cylinders equipped with control valves, it is possible to achieve a continuous mast rotation equal to 91,5 for each side to achieve an overall mast rotation equal to 183. A lateral swing allows positioning of the hole centre out of the track increasing a versatility of the drilling unit. Mast vertical axis rotation system to drill in parallel position to the crawlers allows to execute drilling works near the walls with the minimum crawler truck s movement. The substantial rigidity of the structure and of the joints, allows a precise positioning of the mast in addition to the drastic reduction of undesired movements due to the stresses during use rotary trolley speed and thrust force can be controlled independently. The mast, made of high yield point steel, is equipped with lateral guides made of special steel for the rotary head trolley sliding and for longitudinal movement of the mast itself allows as well a quick installation of the necessary accessories for grouting jetting. Hydraulic piston, installed inside, activates the jack chain of the rotary trolley developing maximum extraction force equal to 7 T. The trolley is equipped with a piston for the lateral displacement of rotary, letting free the borehole axis for the reinforcement insertion. 8
Accessories GG50C Swivel joint Swivel joint is situated back to a floating stub-shaft of the rotary head, and is used for the low pressure fluid adduction up to 50 bar with a joint of 1 1/2 Air/water adduction system is accomplished with 2 hoses of 1 ½ hrough the zinc-plated steel hose carrier along with the hydraulic hoses Maximum working pressure (bar) 50 Type of drilling fluid Air, water, foam, bentonite TP1000 Remote Control Portable remote control console, with cable transmission (length 15m); it is supplied as an alternative to radio control. Like the radio, TP1000 can be either worn by the operator by shoulder belt, or placed to the tripod support. 9
RFSM-1 Clamping limiting device The device permits to control hydraulically the maximum clamping force, avoiding rods or casing s lesions. The adjustment is for both clamps at the same time. KBC Force Balancing Kit An hydraulic device to balance the thrust force for coring use 10
PDA60 Big foot Positioned on the bottom of the mast in order to give more stability at the mast in case of jet grouting treatment. VE2000K Hydraulic winch The winch that is positioned on the top of the mast, is equipped with a transfer case and provided with pulley sheave made of special Teflon, mounted on the ball bearings. It also has one particular rope guiding device that in case of not perfectly aligned lifting, doesn t allow the rope to disentangle from the pulley, preserving it from early wearing and breaking. Besides, the VE2000K winch is provided with an anti-rotation rope and an adequate ballast to support a rope in tension when it is rewound without loading. The useful lifting height is approximately 7 m. This permits lifting of casing tubes. A speed control is proportional and is made with the help of specific manipulator that is positioned on the remote control console. Pulling force dan 2.000 Drum capacity m 46 Rope speed m/min 46/60 11
GM240M Clamps The clamps unit is composed of two independent clamps, flanged in the base of the mast. Lower fixed clamp Top clamp provided with a breakout ram A special design of clamps prevents from material accumulation inside internal parts in order to avoid shutdowns and damages. Clamps are of the open type at the front to allow: rod installation jaw replacement movement of the rig away from the bore hole if the rod gets stuck in the hole Free passage diameter: mm 240 Clamping diameter (min-max): mm 38-230 Clamping force: dan 23.000 Break out torque: danm 3.900 VA60I Hydraulic-control air/mud valve 2 Air/mud valve with a activated through hydraulic jack with electrohydraulic control. It is operated by a remote control and permits also a partial opening that allows a flow rate regulation. 12
TR14000-90-2M Rotary head The Rotary head is equipped with two hydraulic orbital engines of double displacement. An electrical selector, situated on the remote control desk, allows to choose between maximum or minimum displacement. A rotary stub-shaft has the 1 1/2 internal passage and finishes with a pin male thread of 2 3/8 A.P.I. R., and is characterised by the possibility of free or floating movement, useful for protecting rod threads during drilling manoeuvres. Water pump off Water pump on Torque max. Speed 1ª Nm 13860 13860 Speed max. Speed 1ª rpm 31 25 Torque max. Speed 2ª Nm 8860 8860 Speed max. Speed 2ª rpm 46 37 Torque max. Speed 3ª Nm 6650 6650 Speed max. Speed 3ª rpm 61 50 Torque max. Speed 4ª Nm 4430 4430 Speed max. Speed 4ª rpm 92 73 OL60 Line Oiler Line lubrication device for the emission of nebulised oil into compressed air line; including air valves, check (backflow) valve, oil flow regulator. 13
Capacity: l 8,5 Maximum operating pressure: bar 26 Maximum airflow: l/min 22.000 PAT150-15 Water pump Triplex high pressure water pump complete with filter on water inlet line for use as de-coring pump and for washing operation The pump includes a water filter on the suction line. The pump is activated from the remote control panel. It can not be used for bentonite and abrasive fluids. Maximum flow rate: l/min 15 Maximum pressure: bar 150 14