VF Series Electric Forklift Trucks with AC Technology 1,, 1,8 and 2, Stop automatic park brake eliminates uncontrolled roll-back on ramps Oil-immersed brakes CANbus technology High-performance AC motor technology 2 battery choices: DIN and BS
Truck Dimensions α 4.1 β h 4. h6 4.7 h3 4.4 h1 4.2 h2 4.3 h7 4.8 h1 4. s 4.22 m1 4.31 X 1.8 y m2 1.9 4.32 l2 4.2 l1 4.19 Wa 4.3 b13 4.36 b1 4.21 e 4.22 b1 3.6 b11 3.7 Ast 4.33/4.34 Add mm for GN9
ERP16 VF MWB/LWB mast details and capacity ratings () - Supercushion tyres Model Tyres Width across tyres Clear View 2 Stage FFL Clear View OAH FFH MFH Tilt h1 223 28 283 3 23 278 313 28 233 268 28 233 243 23 213 228 238 h2+s 1 17 21 172 1672 1822 1942 14 1 17 h3+s 3 386 4 486 343 393 443 493 321 371 433 4 49 2 4 49 2 h4 3868 4368 4868 368 46 6 6 3813 4313 4913 18 48 78 8 17 47 77 67 F B 1 142 17 147 ERP 16 VF MWB mm 13 142 13 13 13 11 132 2 117 17 1 17 1 17 16 1 149 1 3 119 1 3 119 1 19 1 116 111 1 17 147 142 ERP 16 VF LWB mm 13 13 13 11 132 2 117 17 1 17 1 17 16 1 137 4 149 13 1 3 119 1 3 119 1 19 1 116 111 ERP18 VF MWB/LWB mast details and capacity ratings () - Supercushion tyres Model Tyres Width across tyres 2 Stage FFL OAH FFH MFH Tilt h1 23 278 313 28 233 268 23 213 228 238 h2+s 1 17 21 14 1 17 h3+s 343 393 443 493 321 371 433 4 49 2 h4 46 6 6 3813 4313 4913 17 47 77 67 F B ERP 18 VF MWB 2 / -1 1116mm ERP 18 VF LWB 2 / -1 1116mm 149 16 142 149 174 16 142 148 16 148 174 16 178 147 178 147 17 142 17 17 142 149 16 142 149 17 16 142 148 16 148 174 16 177 17 13 177 17 171 13 171 148 171 16 148 16 147 142 9 16 147 19 142 9 19 13 3 19 13 3 174 174 17 17 174 171 16 ERP2 VF LWB mast details and capacity ratings () - Supercushion tyres Model Tyres Width across tyres ERP 2 VF LWB 2 / -1 1116mm 2 Stage FFL OAH h1 23 278 313 28 233 268 23 213 228 238 FFH h2+s 1 17 21 14 1 17 MFH h3+s 343 393 443 493 321 371 433 4 49 2 h4 46 6 6 3813 4313 4913 17 47 77 67 Tilt F B 198 17 196 19 178 164 178 17 177 171 16 19 164 163 162 16 164 163 161 1 149 192 191 189 193 192 191 1 182 17 161 1 173 169 163 17 16 1 17 16 1 13 147 142 Note that the capacities are given in kilograms. All ratings with DIN. All ratings with mm forks and less load backrest.
VDI 2198 - General Specifications 1.1 Manufacturer 1.2 Model designation ERP 16VF (MWB) ERP 16VF (LWB) ERP 18VF (MWB) ERP 18VF (LWB) ERP 2VF (LWB) Weights Characteristics 1.3 1.4 1. 1.6 1.8 1.9 2.1 2.2 2.3 Drive: Electric Operation Load capacity Load centre Load distance Wheelbase Unladen weight (max. battery) Axle loading laden, front/rear (max. battery) Axle loading unladen, front/rear (max. battery) Q () c (mm) x (mm) y (mm) 326 1431 319 4 / 732 / 167 326 139 321 3996 / 86 132 / 166 321 1431 326 4434 / 621 / 16 321 139 328 4372 / 73 16 / 1663 321 139 329 4 / 9 1633 / 167 3.1 Tyres: P=pneumatic, C=cushion, =supercushion Wheels & Tyres Dimensions 3.2 Tyre size - front 3.3 Tyre size - rear 3. Number of wheels, front/rear (X = driven) 3.6 Track width, front 3.7 Track width, rear 4.1 Mast tilt, forward α / back β 4.2 Height of mast, lowered 4.3 Free lift 4.4 Lift height 4. Height of mast, extended 4.7 Height to top of overhead guard 4.8 Seat height (raised / lowered) 4. Towing coupling height 4.19 Overall length 4.2 Length to front face of forks 4.21 Overall width 4.22 Fork dimensions b1 (mm) b11 (mm) degrees h1 (mm) h2 (mm) h3 (mm) h4 (mm) h6 (mm) h7 (mm) h1 (mm) I1 (mm) l2 (mm) b1 (mm) s/e/l (mm) / -9 9 / 223 332 3868 2981 1981 176 4 / 8 / / -9 9 / 223 332 3868 3 2 176 4 / 8 / 2 / -1 / -9 98 / 339 297 197 1146 4 / 8 / 2 / -1 / -9 98 / 339 383 283 1146 4 / 8 / 2 / -1 / -9 98 / 339 383 283 1146 4 / / Performance 4.23 Fork carriage DIN 1173. Class, A/B 4.24 Fork carriage width 4.31 Ground clearance under mast, laden 4.32 Ground clearance at centre of wheelbase 4.33 Aisle width with pallets long x wide 4.34 Aisle width for pallets 8 wide x long 4.3 Outer turning radius 4.36 Inner turning radius.1 Travel speed laden/unladen.2 Lifting speed laden/unladen.3 Lowering speed laden/unladen. Drawbar pull laden/unladen, 6 minute rating.6 Max. drawbar pull laden/unladen, minute rating.7 Gradeability laden/unladen, 3 minute rating.8 Max. gradeability, laden/unladen, minute rating.9 Acceleration time laden/unladen (to m) b3 (mm) m1 (mm) m2 (mm) Ast (mm) Ast (mm) Wa (mm) b13 (mm) km/h m/sec m/sec N N % % sec 97 339 3432 164.43 /.9. /.47 346 / 368 1141 / 1169 11 / 16 2 / 34 97 3417 34 1762.43 /.9. /.47 346 / 368 1141 / 1169 11 / 16 2 / 34 977 33 3427 164.41 /.8.46 /.4 3337 / 3646 113 / 11664 1 / 1 23 / 3 977 3413 33 1762.41 /.8.46 /.4 3337 / 3646 11346 / 116 1 / 1 23 / 36 977 3413 33 1762.4 /.8.47 /.4 3294 / 3637 1134 / 11647 9 / 1 22 / 36.1 Service brake 6.1 Drive motor output (S2 6 minute rating) 6.2 Lifting motor, (S3 1% rating) kw kw 2 x. 2 x. 2 x. 2 x. 2 x. Other Motor 6.3 6.4 6. 6.6 8.2 8.3 8.4 to DIN 4331/3/36 A, B, C, no voltage/capacity at hr rate weight (min/max) Power consumption in accordance with VDI cycle Working pressure for attachments Oil flow for attachments, manual s Average noise level at operator s ear V/ah kwh/h bar l/min db (A) DIN 4331-A 48 / 62 813 / 899.1 6 DIN 4331-A 48 / 7 962 / 164.1 6 DIN 4331-A 48 / 62 813 / 899.3 6 DIN 4331-A 48 / 7 962 / 164.4 6 DIN 4331-A 48 / 7 962 / 164.6 6 8. Towing coupling type LPAZ,measured according to the test cycles and based on the weighting values contained in EN3 Bottom of forks Full suspension seat (FLM8) specified. Standard hood specified. 93mm with raised hood. Without load backrest Add 32mm for load backrest h6 subject to +/- mm tolerance Spec sheet truck based on: Maximum flow through dash display Extended shift off with e-s 3mm (Clear View) and 343mm () to top of fork, 2 stage LFL mast with standard carriage and mm forks, with HiP performance setting, DIN battery configuration.
VF Series Models: 16VF MWB/LWB, 18VF MWB/LWB, 2VF LWB AC Technology AC technology Class H traction motors are suitable for the most arduous applications. Smooth forward and reverse directional changes providing seamless driving action. In the high-performance or HiP setting, AC technology provides increased speed and acceleration, even when fully laden, and increased speed on grade. As well as improving performance, AC technology reduces maintenance and allows service intervals of hours for most components. Brakes The truck is equipped with automatic park brake and oil immersed brakes. Automatic Stop park brake: spring applied, electro magnetically released park brakes are mounted at the end of both motors. The park brake is automatically set by the control system, so that the brake is always set whenever the truck is not moving, and no traction has been requested. Moreover the park brake provides controllability on ramp applications. Steering A KW AC motor drives a pump which provides oil pressure for the pump and for steering, eliminating the need for a separate steering motor and pump. The steering column is infinitely adjustable in a range of 26º. During cornering the speed of the drive motors is continuously adjusted independently by the traction controller ensuring smooth operation. The VF features a state-of-the-art new customised steer-axle that has increased articulation of the steer wheels, allowing it to turn in smaller spaces than a conventional 4-wheel steer-axle. Performance modes Performance of the truck can be tailored via the enhanced overhead display, with 4 performance modes available to suit the requirements of the application or the preferences of the driver. For maximum speed and acceleration, choose mode 4, or for more delicate maneuvering and extended battery life, mode 1 is ideal. Your service technician can alter the top speed and acceleration of mode 4, with modes 1, 2 and 3 being automatically adjusted as percentages of setting 4. elo and HiP Settings VF trucks feature an elo energy saving setting (accessible via the dash display with service password), which provides exceptional energy efficient performance for when you require continuous operation over longer periods without recharging the battery. You can choose the HiP high performance setting for higher top speeds and acceleration for the most demanding applications. Improved ergonomics The VF is designed for optimum operator comfort. The operator is seated in an ergonomically designed position for maximum safety, comfort, visibility and ease of operation. The truck features a very low step height, generous floor and storage space, standard grab handle for ease of entry and standard reverse grab handle. The full suspension seat has 8mm of adjustment. A swivel seat option for a superior reverse driving position is available. Both the mini-lever module and the manual levers have an integrated direction switch. Clear footwell allows easy access from both sides. A full range of 2 stage LFL and 2 and 3 stage FFL masts are available. masts are designed for maximum visibility, with widely spaced channels, lift chains and main lift cylinders. The new Clear View Mast with class-leading visibility is offered on the 1.6 Ton capacity. Choice of 2 battery sizes: DIN and BS. Choice of 2 wheelbases: Depending on the capacity, there is a choice of Medium Wheelbase (MWB), and Long Wheelbase (LWB). The LWB versions provide extra battery space and longer shift life. MWB versions offer improved maneuverability and reduced stacking aisle dimensions. discharge indicator and lift interrupt are standard on all trucks. Low lifetime costs Lower maintenance costs as a result of less maintenance by oil immersed brakes, electric park brake, and CANbus and AC technology. Transmission is sealed for life, eliminating the need for service. LED light packages are offered as an option. hours service interval for most components. Auto Regen Braking optimises the shift life of the battery and contributes to an increase in the life of parts. Options Accutouch mini-levers Foot directional control Lighting kits, including LED lights Reverse alarm Integrated sideshift DIN and BS battery Side battery extraction
NACCO Materials Handling Limited trading as Europe Materials Handling Flagship House, Reading Road North, Fleet, Hampshire GU1 4WD, United Kingdom. Tel: + 44 () 2 77 Fax: + 44 () 2 77784 www.yale-forklifts.eu Country of Registration: England. Company Registration Number: 263677 Safety. This truck conforms to the current EU requirements. Specification is subject to change without notice. Publication part no. 287292 Rev.4(9) Printed in The United Kingdom (61HG) EN is a registered trade mark. Europe Materials Handling 211. All rights reserved. Truck shown with optional equipment