MODEL 1.360 ZX1 CHARACTERISTICS, POTENCY AND BENEFITS ADAPTIV-ROLLSTÜHLE ECONOMICAL Continuous provision with adjustment possibilities, reduces additional follow-up costs Wide range of standard options minimises the need for expensive custom-made versions Light weight due to the integral design of the frame and the high quality material of the options, reduces wear costs BENEFIT ACCORDING TO THERAPEUTIC ASPECTS The optimal smoothness and the low weight supports the independence of the user Adaptable to changes in function and individual users' needs by precise adjustmens of the back, the seat and the suspension Extensive range of facilities for long-term users The optimised frame ensures compact sitting, driving and transportation Reduced by 3 cm, the compact version of the ZX1 will meet specific requirements for a compact seating position (front frame angle 85 ) Improved handling characteristics: light, sporty, tilt-and-revving FIELDS OF APPLICATION For continuous and long-term provisions For provisions in spinal cord injury Ideally suited for many diseases, including severe affected For users without functions of the lower limbs (lateral transfer, driven by the push rim) For very active wheelchair users, hand cycles and frequent travelers 119
EQUIPMENT AND CODES INTRODUCTION Dear customer, thank you very much for your choice of the ZX1. To ensure the right configuration and a faultless product order at least 20 selections in 16 categories have to be made. Our example shows a standard configuration of the ZX1. CAT. 00 00 00 01 02 03 05 06 07 07 08 08 09 10 11 12 13 14 14 15 16 CODE 352 346 4950 40 784 FSH RSH 5 651 423 493 692 496 305 631 410 100 312 359 185 235 Additionally you may select further equipment, options and accessories at extra cost. Mark your selection in the "YES" column on the odd pages of our ORDER FORM! TECHNICAL DATA Seat width in cm 34 36 38 40 42 44 46 48 50 Client weight 120 Width ready to go in mm 510 530 550 570 590 610 630 650 670 Empty weight ~ 9 Width folded in mm 300 with 0,5 wheel camber resp. 350 with 3 wheel camber Permitted overall weight 129 Seat depth in cm 38 / 40 / 42 / 44 / 46 / 48 Transport weight ~ 6,7 Seat height front / rear in cm 46 to 52 / 40 to 48 Rear wheel 610 (24") Overall height in mm Seat height rear + back height Back rest height in cm variable from 25 to 45, 50 in combination with height adjustable push handles Code 410 Arm support height in cm ca. 15-29 Length with footrests in mm 810-990 depending on frame length, wheel size and axle position Weights in kg, wheels in mm, tolerances ± 1 cm 00 FRAME FORM (FRAME LENGTH) C 352 C 353 C 354 Overall height Rear seat height Axle position LSL Front seat height Frame short Frame medium Frame long i.c.w. Code 346 i.c.w. Code 347 i.c.w. Code 346 i.c.w. Code 347 i.c.w. Code 346 i.c.w. Code 347 FL = 595 mm FL = 565 mm FL = 635 mm FL = 605 mm FL = 675 mm FL = 645 mm SD = 38-40 cm SD = 38-40 cm SD = 42-44 cm SD = 42-44 cm SD = 46-48 cm SD = 46-48 cm OL = 840-910 mm OL = 810-880 mm OL = 880-950 mm OL = 850-920 mm OL = 920-990 mm OL = 890-960 mm Frame length Overall length ground clearance A compact frame length (FL) depends on the selection of your seat depth! The overall length (OL) depends on the frame length, wheel size and axle position 00 FRAME FORM (FRAME ANGLE AND FRONT FRAME INSET) C 346 C 347 C 4950 C 4959 77 85 SEAT WIDTH SEAT WIDTH FRAME INSET WITHOUT FRAME INSET 01 DETERMINE THE SEAT WIDTH (SW) On the wheelchair Folding wheelchair: measured between the outer edges of the seat tubes. Rigid frame and adaptive wheelchair: between the side guards. The measure is taken in half of the seat depth and at sitting level. SEAT WIDTH On the client Measure the widest part of the pelvis (trochanter major) in sitting position and add 2 cm. The thighs may touch the side guard. Seat width Note The seat width is the most important dimension of the wheelchair. 120 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.
ORDER FORM 1 of 6 ORDER QUOTATION CUSTOM-MADE VERSION Fax 0 57 33-922 9311 Customer service 0 57 33-922 311 ZX1 MODEL 1.360 Invoice address / customer no.: Delivery address: Consignment / remarks: Model 1.360 ZX1 (Price for basic model, with cushion, 24" quick release wheels, aluminium handrim, side guard of high strenght magnesium and height adjustable push handles) 1.795,00 All prices are excl. VAT acc. to legal regulations! Valid from 1. Jan. 2011 to 31. Dec. 2011. Our general terms and conditions apply, which can be found on www.meyra-ortopedia.de under AGB. Please mark your selection in column "YES" on this page of our ORDER FORM! 00 FRAME FORM (FRAME LENGTH) CAT YES CODE DESCRIPTION FL IN MM SD IN CM OL IN MM POUND 00 352 Frame short 595* / 565** 38-40 840-910* / 810-880** 0,00 ADAPTIV-ROLLSTÜHLE 00 353 Frame medium 635* / 605** 42-44 880-950*/ 850-920** 0,00 00 354 Frame long 675* / 645** 46-48 920-990* / 890-960** 0,00 Consider and select your seat depth in category 02! *i.c.w. frame Code 346 **i.c.w. frame Code 347 00 FRAME FORM (FRAME ANGLE AND FRONT FRAME INSET) 00 346 Standard front frame 77 0,00 00 347 Compact front frame 85 Compact frame is 30 mm shorter. 0,00 00 4950 With front frame inset (2 cm per side) 0,00 00 4959 Without front frame inset 0,00 01 SEAT WIDTH (SW) 01 34 SW 34 cm 0,00 01 36 SW 36 cm 0,00 01 38 SW 38 cm 0,00 01 40 SW 40 cm 0,00 01 342 SW 42 cm 0,00 01 344 SW 44 cm 0,00 01 46 SW 46 cm 0,00 01 48 SW 48 cm 0,00 01 350 SW 50 cm 0,00 Standard version In case you do not make another selection we will generally deliver the standard version. 121
EQUIPMENT AND CODES 02 DETERMINE THE SEAT DEPTH (SD) at height Back height Seat depth Seat cushion LSL On the wheelchair From the front edge of the backrest to the front edge of the seat system (seat upholstery, solid seat, padded seat). The measure is taken in the middle of the seat. On the client Thigh length, measured from the back to the hollow of the knee minus two finger s width. Note Different back systems as e.g. the adjustable backrest or a solid back change the real seat depth. 03 DETERMINE THE SEAT HEIGHT FRONT (FSH) (WITHOUT SEAT CUSHION) On the wheelchair Vertical from ground to upper edge of seat frame tube Front seat height, measured at the front upper edge of the seat tube on LSL ground clearance Front seat height On the client Shank length plus required ground clearance for the footrests (Shank length + ca. 7 cm) Remark: Please consider the height of the seat cushion! Example with seat cushion: LSL + ground clearance + seat cushion = FSH Example without seat cushion: LSL + ground clearance = FSH 03 C 151 100 x 30 mm 4" 03 C 325 125 x 30 mm 5" 03 C 327 142 x 37 mm 5,5" 03 Article 1068963 100 x 23 mm 4" 03 Article 1068350 100 x 25,4 mm 4" 03 Article 1068351 100 x 25,4 mm 4" 03 Article 1068352 125 x 25,4 mm 5" Soft solid rubber Transparent / Coloured 03 Article 1072385 03 Article 1072386 03 Article 1068353 100 x 32 mm 125 x 32 mm 125 x 25,4 mm 4" 5" 5" 04 C 560 3 cm 122 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.
ORDER FORM 2 of 6 02 SEAT DEPTH (SD) CAT YES CODE DESCRIPTION FRAME CODE POUND 02 368 SD 38 cm incl. utensils bag under the seat upholstery 352 0,00 02 615 SD 40 cm incl. utensils bag under the seat upholstery 352 0,00 02 784 SD 42 cm incl. utensils bag under the seat upholstery 353 0,00 02 618 SD 44 cm incl. utensils bag under the seat upholstery 353 0,00 02 619 SD 46 cm incl. utensils bag under the seat upholstery 354 0,00 02 787 SD 48 cm incl. utensils bag under the seat upholstery 354 0,00 03 SEAT HEIGHT FRONT (FSH) COMBINED WITH CASTOR (WITHOUT SEAT CUSHION) Horizontal columns = seat heights in cm Vertical line = Ø castor sizes in mm Please select your desired seat height through the combination of seat height and wheel size. The maximum admissible seat height differenz between front and rear seat height is amounts to 10 cm! Ø 100 C 151 FSH 46 47 48 49 50 51 52 ADAPTIV-ROLLSTÜHLE Ø 125 C 325 Ø 142 Soft solid rubber C 327 With the front seat height selection a standard castor is automatically configured. As an option please select castors from the Xtrends table below. 03 X-TRENDS CASTORS CAT YES CODE ARTICLE DESCRIPTION RIM TYRES Ø x B POUND 03 689 1068963 Lightwheel (pair) Plastic 100 x 23 mm 50,00 transparent / coloured 03 689 1068350 Castor (pair) Alu silver 100 x 25,4 mm 110,00 03 689 1068352 Castor (pair) Alu silver 125 x 25,4 mm 110,00 03 689 1068351 Castor (pair) Alu black 100 x 25,4 mm 110,00 03 689 1072385 Castor (pair) Alu silver 100 x 25,4 mm 110,00 03 689 1072386 Castor (pair) Alu silver 125 x 32 mm 110,00 03 689 1068353 Castor (pair) Alu black 125 x 32 mm 110,00 04 SEAT CUSHION 04 560 Seat cushion 3 cm 0,00 Please select your desired colour in category 16 seat and back upholstery colours. Standard version In case you do not make another selection we will generally deliver the standard version. 123
EQUIPMENT AND CODES 05 DETERMINE THE SEAT HEIGHT REAR (RSH) Overall height Rear seat height Back he Axle position Frame length Seat cushion LSL gro clea On the wheelchair Vertical from ground to upper edge of seat frame tube Rear seat height, measured at the rear upper edge of the seat tube Remark: The adjustment of the rear seat height strongly depends on the size selection of the rear wheel. As a standard the difference front / rear should be 3 cm. This is a seat angle of 3. The optimal position of the rear wheel is factory-adjusted according to your selection. The elevation of the seat position by the CROSS wheel is marginal. 06 DETERMINE THE HORIZONTAL REAR WHEEL POSITION (CENTRE OF GRAVITY ADJUSTMENT) Type of driver Active Medium Passive Varioblock Short Code 766 Medium Code 767 Long Code 768-3,5 cm + 3,5 cm ** Axle position Position 1 2 3 4 5 6 6 7 8 Distance* in mm 100 90 80 70 60 50 50 40 30 *Measuring method: middle of back tube to middle of axle in mm **Picture shows Multiblock Code 865 07 C 651 Rim profile 24" 07 C 695 Hollow rim 24" 07 C 752 Hollow rim 24" SILVERDESIGN ACTIVE wheel, black "Light" wheel, black 07 Article 1068704 07 Article 1068705 07 Article 1068706 07 Article 1068707 07 Article 1068708 07 Article 1068709 07 Article 1068713 124 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.
ORDER FORM 3 of 6 05 SEAT HEIGHT REAR (RSH) COMBINED WITH REAR WHEEL (WITHOUT SEAT CUSHION) Horizontal columns = seat heights in cm Vertical line = Ø rear wheel Please select your desired seat height through the combination of seat height and wheel size. The maximum admissible seat height differenz between front and rear seat height is amounts to 10 cm! 40 42 44 46 48 Ø 24 x 1" 06 HORIZONTAL REAR WHEEL POSITION (CENTRE OF GRAVITY ADJUSTMENT) Measuring method: middle of back tube to middle of axle Varioblock Active Code 766 Medium Code 767 Passive Code 768 Position 1 2 3 4 5 6 6 7 8 Selection 06 EXTENSION OF THE REAR WHEEL POSITION 06 865 Multiblock for the extension of the rear wheel position by each 35 mm to the front or rear. Just in combination with Varioblock Code 767 and RSH 42, 44 and 46 cm. 50,00 ADAPTIV-ROLLSTÜHLE 07 REAR WHEELS COMBINED WITH SEAT HEIGHT CAT YES CODE DESCRIPTION Ø POUND 07 651 SILVERDESIGN with radial spokes and large flange hub incl. quick-release axle 24" 0,00 (pair) 07 695 Active wheel with radial spokes, large flange hub, hollow rim in black 24" 40,00 Recommended for more than 100 kg client weight or dynamic driving style! 07 752 "Light" wheel incl. Speed Lite tyres and aluminium handrim, just in combination with 0,5 -wheel camber Code 423 24" 120,00 For Code 651 and 695 please select your handrim in category 08 and the tyres in category 09. As an option select Xtrends rear wheels incl. handrims and tyres instead of rear wheels Code 651, 695 or 752 07 X-TRENDS REAR WHEELS CAT YES CODE ARTICLE DESCRIPTION Ø POUND 07 688 1068704 Six-Star incl. 8 bar high pressure tyres and premium steel 24 x 1" 436,00 handrim 07 688 1068705 Six-Star incl. 8 bar high pressure tyres and aluminium handrim 24 x 1" 436,00 07 688 1068706 Six-Star incl. 8 bar high pressure tyres and tetra handrim 24 x 1" 510,00 07 688 1068707 CROSS wheel incl. aluminium ring, coarse lug tyres and premium 24x1,75" 302,00 steel handrim 07 688 1068708 Spinergy wheel incl. Marathon Plus Evolution and tetra handrim 24 x 1" 750,00 07 688 1068709 Spinergy wheel incl. Marathon Plus Evolution and titanium 24 x 1" 750,00 handrim 07 688 1068713 Black Light incl. Marathon Plus Evolution and aluminium handrim 24 x 1" 436,00 These trendy wheels are supplied in pairs. Individual fitting of X-Trends wheels on request. Standard version In case you do not make another selection we will generally deliver the standard version. 125
EQUIPMENT AND CODES 07 C 697 07 C 423 07 C 447 0,5 Max. width = SW +17 cm 3 Max. width = SW +22 cm 08 C 445 08 C 493 08 C 494 08 C 168 08 C 166 08 C 692 15 mm 08 C 693 25 mm OVERALL WIDTH IN MM WITH 15 MM HANDRIM SPACE Seat width 34 36 38 40 42 44 46 48 50 0,5 wheel camber (mm) 510 530 550 570 590 610 630 650 670 3 wheel camber (mm) 560 580 600 620 640 660 680 700 720 folded, 0,5 wheel camber 300 folded, 3 wheel camber 350 09 C 496 09 C 486 09 C 902 09 C 897 10 C 305 10 C 595 Light Version 11 DETERMINE THE BACK UPHOLSTERY HEIGHT (BH) Back height Seat depth Se On the Wheelchair From the upper edge of the seat tube to the upper edge of the back upholstery. On the client The back support depends on the individual handicap. Remark: For clients who drive themselves the back height ends maximal two finger s widths under the shoulder blade tip. If the wheelchair is propelled with the arms the shoulder blade should be free and not be hindered by the back upholstery. A seat cushion reduces the real back height. 126 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.
ORDER FORM 4 of 6 07 REAR WHEEL OPTIONS 07 WHEEL CAMBER 07 423 0,5 wheel camber (track adjustable) 0,00 07 447 3 wheel camber (track adjustable) 0,00 08 HANDRIMS AND HANDRIM OPTIONS (can not be combined with Xtrends wheels) CAT YES CODE DESCRIPTION Ø POUND 08 445 Titanium, with 6 fixtures, just in combination for the Active wheel Code 695 24" 200,00 08 493 Premium steel high polished 24" 0,00 08 494 Aluminium 24" 0,00 08 168 Optigrip special handrim for tetraplegics 24" 150,00 08 166 Handrim coating made of silicone, smooth, black 24" 45,00 08 692 Handrim space 15 mm 24" 0,00 08 693 Handrim space 25 mm 24" 0,00 ADAPTIV-ROLLSTÜHLE 09 TYRES (can not be combined with Xtrends wheels) CAT YES CODE DESCRIPTION Ø POUND 09 496 High pressure tyres 8 bar 24 x 1" 0,00 09 486 Pneumatic tyres with groove profile 24 x 1 3/8" 0,00 09 902 Solid puncture proof tyres 24 x 1" 0,00 09 897 Marathon Plus Evolution no flat tyres 24 x 1" 32,00 10 BRAKES 10 305 Pressure brake for driver 0,00 10 595 "Light" pressure brake 0,00 11 BACK UPHOLSTERY HEIGHT (BH) CAT YES CODE BH DESCRIPTION POUND 11 620 25 cm Back upholstery, adjustable tension with straps 0,00 11 626 30 cm Back upholstery, adjustable tension with straps 0,00 11 631 35 cm Back upholstery, adjustable tension with straps 0,00 11 632 40 cm Back upholstery, adjustable tension with straps 0,00 11 633 45 cm Back upholstery, adjustable tension with straps 0,00 11 637 50 cm Back upholstery, adjustable tension with straps Just in combination with push handles Code 410 0,00 Standard version In case you do not make another selection we will generally deliver the standard version. 127
EQUIPMENT AND CODES 12 C 410 12 C 411 12 C 502 12 C 29 12 C 31 96 93 90 87 84 13 C 100 13 C 302 13 C 748 13 Article 1071963 Light Version The symbols illustrate the functions of each legrest. flip-up height adjustable angle adjustable 14 C 311 14 C 312 14 C 313 14 C 315 Light Version Light Version 14 C 359 128 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.
ORDER FORM 5 of 6 12 BACKREST (STANDARD 90 TO THE SEAT) 12 410 Back with push handle, 5 cm height adjustable 0,00 12 411 Back without push handle 0,00 12 502 Push handle, mounted on the back tube, stepless adjustable up to 15 cm 70,00 12 BACKREST OPTIONS 12 29 Back, angle adjustable from the seat +/- 15 in 5 steps, adjustable later 150,00 12 31 Back angle factory-bent (fixed) 84 87 93 96 95,00 13 SIDE GUARDS AND ARMRESTS Please note the marked functional features! 1 = securely screwed 2 = swing-up 3 = removable 4 = lockable 5 = armrest height adjustable 6 = covering the wheel CAT YES CODE DESCRIPTION 1 2 3 4 5 6 POUND 13 100 Aluminium side guard in frame colour with carbon fiber padding 65,00 13 302 "Light" side guard made of high strength magnesium alloy in 0,00 frame colour 13 748 Aluminium side guard in frame colour with carbon fiber padding 195,00 incl. height adjustable armrest (screwed-on) 13 686 Article 1071963 Xtrends carbon fiber side guard (pair) 150,00 ADAPTIV-ROLLSTÜHLE 14 LEGRESTS AND FOOTRESTS flip-up height adjustable angle adjustable CAT YES CODE DESCRIPTION DEPTH LSL POUND 14 311 "Light" footrest made of high strength magnesium alloy in frame 10 cm 39-48 30,00 colour, flip-up, height and angle adjustable up to max. SW 46 cm 14 312 Aluminium footrest in frame colour 10 cm 39-48 0,00 flip-up, height and angle adjustable 14 313 Aluminium footrest in frame colour 15 cm 39-48 30,00 flip-up, height and angle adjustable 14 315 "Light" footrest made of high strength magnesium alloy in frame colour, flip-up, height and angle adjustable, up to max. SW 46 cm 15 cm 39-48 30,00 14 FOOTREST ACCESSORIES 14 359 Calf strap 0,00 Required LSL cm (measured without seat cushion) Shank length factory-adjustment 39-48 cm possible. Standard version In case you do not make another selection we will generally deliver the standard version. 129
EQUIPMENT AND CODES 15 C 130 15 C 132 15 C 183 15 C 188 15 C 206 15 C 216 15 C 4001 15 C 4023 15 C 4922 15 C 4923 15 C 4925 15 C 4927 15 C 185 16 C 235 16 C 292 16 C 296 17 C 489 17 C 691 17 C 712 / 713 17 C 309 17 C 679 17 C 833 17 C 970 17 C 819 17 Article 205542100 17 C 951 17 Article 261519300 17 Article 261519600 17 Article 261530900 17 Article 261599900 17 Article 261530500 17 Article 206964600 130 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.
ORDER FORM 6 of 6 15 FRAME COLOURS CAT YES CODE DESCRIPTION YES CODE DESCRIPTION POUND 15 130 Titanium grey 4023 Plain white 0,00 15 132 Red metallic 4922 Green metallic 0,00 15 183 Silver metallic 4923 Orange metallic 0,00 15 188 Blackstar 4925 Chrome silver 0,00 15 206 Matte black 4927 Pacific blue 0,00 15 216 Deep black 185 Cappuccino brown metallic 0,00 15 4001 Brick red 0,00 Further frame colours can be selected on request at extra cost! For colours please see page 6. 16 BACK UPHOLSTERY COLOURS (SEAT UPHOLSTERY ALWAYS BLACK) 16 235 Trevira (black) 0,00 16 292 Vented net material, black 30,00 16 296 Vented net material, red 30,00 17 WHEELCHAIR ACCESSORIES 17 HAND AND SPOKE GUARD (just in combination with SILVERDESIGN wheel Code 651) 17 489 Transparent 60,00 17 ANTI-TIP-WHEELS 17 691 Anti-tip-wheel, 1 pair, swing-away (recommended) Not in combination with step tube code 309 159,00 17 712 1 Anti-tip-wheel, swing-away, mounted left 79,00 17 713 1 Anti-tip-wheel, swing-away, mounted right, not in combination with step tube Code 309 79,00 17 OTHER ACCESSORIES 17 309 Step tube (1 piece), mounted right Not in combination with anti-tip-wheel code 691 and 713 15,00 17 679 Folding fixture 5,00 ADAPTIV-ROLLSTÜHLE 17 833 Safety belt with lock 30,00 17 970 Crutch holder in combination with step tube 30,00 17 819 Passive lighting 7,50 17 205542100 Tyre pump 80,00 17 951 Accessory net 7,00 17 XTRENDS ACCESSORIES 17 261519300 X-TREME backpack 35,00 17 261519600 BLACK WHEEL CASE for transporting the rear wheels 75,00 17 261530900 X-BEAM Gyro Twister 35,00 17 261530500 SILVER PEN 15,00 17 206964600 3M spoke reflectors 20,00 17 261599900 Watch "Chronograph XR" in silver presentation box 75,00 Date Standard version In case you do not make another selection we will generally deliver the standard version. Signature 131
NOTES AND LAYOUT FOR FURTHER INFORMATION 132 Dimensions in cm / mm (1 inch = 2,54 cm) Weights in kg (1 pd = 0,45 kg) Speed in kmh (1 mph = 1,61 km/h) Tolerance ± 1,0 cm / 0,59 inch The specifications are subject to constructional changes.