eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb for the following locations aimlerstraße 4a, 47167 uisburg Möwenstraße 101c, 26388 Wilhelmshaven Arbeitscontainer ansaport, Am Sandauhafen 20, 21129 amburg Tests in the fields: physical, physico-chemical and chemical analysis of solid fuels (biofuels, coal, coke); sampling of solid (bio-) fuels and Ferro-alloys; sampling and selected analysis of iron ores The testing laboratory is permitted, without being required to inform and obtain prior approval from AkkS, to use standard testing methods listed here with different issue dates. The laboratory maintains a current list of all test methods in a flexible scope of accreditation. The test methods are marked with the listed symbols of the locations, where they are implemented: - uisburg W - Wilhelmshaven - amburg (Sample preperation facility at ansaport) This document is a translation. The definitive version is the original German annex to the accreditation certificate. Abbreviations used: see last page The certificate together with its annex reflects the status at the time of the date of issue. The current status of the scope of accreditation can be found in the database of accredited bodies of eutsche Akkreditierungsstelle Gmb. https://www.dakks.de/en/content/accredited-bodies-dakks Page 1 of 5
Annex to the accreditation certificate -PL-19399-01-00 1 Sampling and sample preparation of solid (bio-) fuels and Ferro-Alloys ISO 18283 2006-09 ard coal and coke - Manual sampling, W, IN EN 14778-09 IN EN 14780-09 ISO 4552-1 1987-12 ISO 4552-2 1987-12 fde, Bd. 5, S. 56 ff 2013 Solid biofuels - Sampling (German version EN 14778:) Solid biofuels - Sample preparation (German version EN 14780:) Ferroalloys; Sampling and sample preparation for chemical analysis; Part 1 : Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese Ferroalloys; Sampling and sample preparation for chemical analysis; Part 2 : Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium andbuch für das Eisenhüttenlaboratorium; Probenahme von Ferrolegierungen und Zusatzmetallen. Allgemeine Regeln für die Probenahme an aufwerken und diversen Pack- oder Ladeeinheiten sowie von Transportbändern. ASTM 2234/2234M-10 2010 ASTM 2013/2013M-12 2012 Standard Practice for Collection of a Gross Sample of Coal, W, Standard Practice for Preparing Coal Samples for Analysis, W, ASTM 346/346M-11 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis, W, 2 Physical and physical-chemical Analyses of solid fuels (Biofuels, Coal and Coke) ISO 579 2013-05 Coke - etermination of total moisture ISO 589 2008-11 ard coal - etermination of total moisture, W, ISO 11722 1999-05 Solid mineral fuels - ard coal - etermination of moisture in the general analysis test sample by drying in nitrogen ate of issue: 29.11.2018 Page 2 of 5
Annex to the accreditation certificate -PL-19399-01-00 ISO 687 IN EN 14774-2 IN EN 14774-3 2010-02 ISO 1171 IN EN 14775 2012-11 ISO 1928 2009-06 IN EN 14918 IN EN 15149-2 -01 IN EN 16126 2012-05 IN EN 16127 2012-05 IN EN 15103 ISO 556 1980-11 IN EN 15210-1 Solid mineral fuels - Coke - etermination of moisture in the general analysis test sample Solid biofuels - etermination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method; (German version EN 14774-2:2009) Solid biofuels - etermination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample; (German version EN 14774-3:2009) Solid mineral fuels - etermination of ash Solid biofuels - etermination of ash content; (German version EN 14775:2009) Solid mineral fuels - etermination of gross calorific value by the bomb calorimetric method and calculation of net calorific value Solid Biofuels - etermination of calorific value; (German version EN 14918:2009) Solid biofuels - etermination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below; (German version EN 15149-2:2010) Solid biofuels - etermination of particle size distribution of disintegrated pellets; (German version EN 16126:2012) Solid biofuels - etermination of length and diameter of pellets; (German version EN 16127:2012) Solid biofuels - etermination of bulk density; (German version EN 15103:2009) Coke (greater than 20 mm in size); etermination of mechanical strength Solid biofuels - etermination of mechanical durability of pellets and briquettes - Part 1: Pellets; (German version EN 15210-1:2009) ate of issue: 29.11.2018 Page 3 of 5
Annex to the accreditation certificate -PL-19399-01-00 ASTM 2961-11 ASTM 3173-11 ASTM 3174-12 2012 ASTM 3175-11 ASTM 5865-13 2013 Standard Test Method for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize. Standard Test Method for Moisture in the Analysis Sample of Coal and Coke Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke Standard Test Method for Gross Calorific Value of Coal and Coke, W, 3 Chemical Analyses of solid fuels (Biofuels, Coal and Coke) ISO 562 IN EN 15148 2010-03 ard coal and coke - etermination of volatile matter Solid biofuels - etermination of the content of volatile matter; (German version EN 15148:2009) ISO 19579 2006-10 Solid mineral fuels - etermination of sulfur by IR spectrometry IN EN 15289-04 ISO 29541 2010-10 IN EN 15104-04 ASTM 4239-14 2014 Solid biofuels - etermination of total content of sulfur and chlorine; (German version EN 15289:) (standard withdrawn) (here: only determination of sulfur) Solid mineral fuels - etermination of total carbon, hydrogen and nitrogen content - Instrumental method Solid biofuels - etermination of total content of carbon, hydrogen and nitrogen - Instrumental methods; (German version EN 15104:) Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using igh-temperature Tube Furnace Combustion ate of issue: 29.11.2018 Page 4 of 5
Annex to the accreditation certificate -PL-19399-01-00 ASTM 5373-14 2014 Standard Test Methods for etermination of Carbon, ydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke 4 Sampling and selected analysis of iron ores ISO 3082 2009-06 ISO 3087-10 Iron ores - Sampling and sample preparation procedures Iron ores - etermination of the moisture content of a lot Abbreviations used: ASTM American Society for Testing and Materials IN eutsches Institut für Normung e. V. EN Europäische Norm fde andbuch für das Eisenhüttenlaboratorium IEC International Electrotechnical Commission ISO International Organization for Standardization ate of issue: 29.11.2018 Page 5 of 5