TOGGLE CLAMPS AND LATCHES See the New SecureLock Latch Clamps, pgs. 2834 Distributed by: www.goodhandinc.com QUALITY DIVERSITY ECONOMY
DRIVEN BY CUSTOMER DEMAND For over 45 years, we ve served our valued, worldwide customers by providing clamps that are built to suit a wide variety of industrial and OEM applications. Because whether you need a clamp to push, pull, hold down, lock, position, or tighten, we ll either help you find exactly what you need in our catalog, or we ll modify one of our standard clamps to your exact specifications, or we ll custombuild a clamp for you! Our caring, highly skilled staff is devoted to helping you design a system that will solve both the ordinary and repetitive, and the unique and situational workholding needs. With vertical, horizontal, and push/pull action, toggle clamps offer the flexibility to provide solutions in manufacturing, assembly, storage, machine building, and shop use. We manufacture over 350 models of toggle clamps, and our new product development is ongoing and is driven by customer demand. We pride ourselves on featuring a line of clamps that offers more variety than the competition, and we are continually seeking new designs to fill a need that has not yet been met. We react to you, our valued customers, with urgency and sincere interest in meeting your requirements. We remain driven to satisfy, driven to deliver a clamping line that exceeds your expectations in quality, diversity, and economy. Please contact us and tell us how we can best serve you... CUSTOMER SERVICE : 800.989.5244 WWW.GOODHANDINC.COM Good Hand, Inc. 8750 Pioneer Blvd. Santa Fe Springs, California 90670 U.S.A. Tel : 562.949.8625 Fax : 562.949.4875 EMail: sales@valtrainc.com
GOOD HAND QUALITY ASSURANCE All diestamped steel parts are deburred, cleaned, and zincplated for a finish that resists corrosion and creates a smooth, easy to clean surface. Toggle mechanism designed to allow maximum clearance for ease of loading and unloading workpieces. Hand grips are covered with an oil and stain resistent red vinyl or red plastic for easy identification and to assure the safety and comfort of the operator. Flanged Washers are supplied with all Ubar and open bar models. Bolt retainers are supplied with all solid bar models. TOGGLE ACTION GH12205 The theoretical maximum holding of clamping force of a toggle action device is achieved when the three pivot points are in a straight line. To make allowance for external forces due to vibration and changing load conditions in industrial use, the proper amount of over travel of the center pivot point has been carefully calculated to yield maximum clamping pressure, while achieving a positive locking position. HOLDING CAPACITY AND CLAMPING FORCE All GOOD HAND clamps are rated by their holding capacity. This rating is the maximum force the clamp will support when locked in the closed position without creating permanent deformation. This force is measured at a point closest to the base and diminishes as the end of the bar is reached. The clamping force is defined as the actual force being applied by the clamp to the workpiece. This rating is not constant due to such variables as the location of force on the handle, the amount of force the operator applies, and the location of the spindle on the holddown bar. NOTE: Engineering changes, dimensions and specifications referenced in this catalog are subject to change without notice. Long UBolt UNIQUE Look for this logo throughout our catalog to see our clamps with unique features such as: Higher Base (Greater clearance) Side Mounting (Saves fixture space) Yokes (Clamp 2 parts with 1 stroke) Long UBolts (Extend the reach of Latch Clamps) Reverse Action (Lowers the profile of Push Pull clamps) Yoke Standard High Base Side Mount
INDEX GOOD HAND DESTACO CARR LANE PAGE GOOD HAND DESTACO CARR LANE PAGE GOOD HAND DESTACO CARR LANE PAGE Vertical Handle Toggle Clamps Horiztonal Handle Toggle Clamps (cont.) Push/Pull Toggle Clamps (cont.) 101A 201U CL150VTC 1 101AI 201B CL151VTC 1 101AIT 201TB 1 101AT 201T CL152VTC 1 101ASS 201SS CL150VTCS 1 11002B 1 12002B 1 13002B 1 13005 305U CL200VTC 2 13005SS 305USS CL200VTCS 2 13005HB 2 13005SM 2 13007 307U 2 13007SM 2 13008 309U 2 12050 202 CL250VTC 3 12050U 202U 3 12050UL 202UL 3 12050SS 202SS CL250VTCS 3 12050HB 3 12050SM 3 12055 202B CL251VTC 3 12060 3 12065 3 12070 202T CL252VTC 3 12075 202TB 3 12080 3 12085 3 101B 4 102B 4 106B 5 12205 5 12130 207U CL450VTC 6 12130SS 207USS CL450VTCS 6 12130HB 6 12130SM 6 12131 207TU CL452VTC 6 12132 207UL CL453VTC 6 12133 207TUL CL452VTC 6 12135 207UB CL451VTC 6 12136 207TUB 6 12137 207ULB CL451VTC 6 12138 207TULB 6 12140 207S CL350VTC 6 12141 207TS CL352VTC 6 12142 207L CL353VTC 6 12143 207TL CL352VTC 6 12145 207SB CL351VTC 6 12146 207TSB 6 12147 207LB CL351VTC 6 12148 207TLB 6 12265 210U CL650VTC 7 12265SS 210USS CL650VTCS 7 12270 204UB CL651VTC 7 12275 210S CL550VTC 7 12280 204SB CL551VTC 7 12285 210TU CL652VTC 7 12290 204TUB 7 12295 210TS CL552VTC 7 12300 201TSB 7 12305 7 12310 7 12315 CL600VTC 7 12320 CL610VTC 7 10444 8 10448 8 10247 247U CL850VTC 8 10248 247UB CL851VTC 8 10249 247S CL750VTC 8 10250 247SB CL751VTC 8 101J 267U CL1050VTC 9 101JS 267 CL950VTC 9 Horizontal Handle Toggle Clamps 22005 10 22010 10 22025 10 22030 10 201 205U CL250HTC 10 201SS 205USS CL250HTCS 10 201I 205UB CL251HTC 10 201L 205UL CL253HTC 10 201R 205UR CL252HTC 10 201A 205S CL150HTC 10 201ASS 205SSS CL150HTCS 10 201AI 205SB CL151HTC 10 201AL 205SL CL153HTC 10 201AR 205SR CL152HTC 10 20800 11 20800SS 11 20300 11 22100 12 22105 12 20752B 213U CL260HTC 12 21502B 12 22502B 227U 12 201B 215U CL350HTC 13 201BSS 215USS CL350HTCS 13 201BI 215UB CL351HTC 13 201BS 215S CL300HTC 13 201BSI 215SB 13 201BHB 13 201BSM 13 20820 317U CL475HTC 14 203F 14 203FL 14 202F 14 202FL 14 225D 225U CL450HTC 15 225DSS 225USS CL450HTCS 15 225DI 225UB CL451HTC 15 225DHB 15 225DSM 15 22165 16 22170 16 22175 16 22180 16 22185 16 22190 16 22195 16 22200 16 21383 16 25383 17 22235 17 25382 18 20235 235U CL550HTC 18 20235SS 235USS CL550HTCS 18 20236 235UB CL551 18 200W 19 200WL 19 200WH 19 200WLH 19 220WH 19 220WLH 19 204GB 20 204GBL 20 204GBLH 20 204G 20 204GL 20 Push/Pull Toggle Clamps 301A 601 CL50SPC 21 301B 21 36006 21 36070 21 302F 605 CL150SPC 22 302FSS 22 302D 22 30282 22 36092 609 22 36020 23 36003 603 CL100PC 23 30290 23 30292 23 36060 620 CL275SPC 24 30607 607 24 36010 610 CL250SPC 24 36012 618 24 303EK 25 36330 630 CL350TPC 25 30250 25 30450 25 36202 602 CL150TPC 26 36204 604 CL250TPC 26 36204SS 604SS 26 36205 26 36224 624 CL350TPC 26 36225 26 304C 26 304E 608 CL200PC 26 304H 26 305C 26 305E 26 305H 26 30509 27 30609 27 30519 27 30619 27 Latch Type Toggle Clamps 40323 323 CL100PA 28 40323SS 323RSS CL100PAS 28 431 331 CL200PA 28 431SS 331SS CL200PAS 28 40341 341 CL300PA 28 40341SS 341SS CL300PAS 28 40323R 323R 28 431R 331R CL200LPA 29 40341R 341R CL300LPA 29 40323LUB 29 40323LUBSS 29 431LUB 29 431LUBSS 29 40341LUB 29 40341LUBSS 29 40370 375 CL400PA 30 40370R 375R CL400LPA 30 40380 385 CL500PA 31 40370LP 375509/385102 CL500PAA 31 40820 32 40840 32 40870 32 40324 324 CL110PA 32 40334 334 CL210PA 32 40344 344 CL310PA 32 40324R 324R 33 40334R 334R 33 40344R 344R 33 451 351 CL250PA 34 451LP 351000 CL250PAL 34 451LPSS 351900 CL250PASL 34 451SS 351SS CL250PAS 34 452 351B CL251PA 34 452LP CL251PAL 34 452LPSS CL250PASL 34 452SS 351BSS 34 40371 371 34 40371LP 371000 34 43810 381 CL350PA 34 43810LP 381000 CL350PAL 34 43101 301 CL150PA 34 43101LP 34 43110 35 43120 35 43150 35 43160 35 Toggle Pliers 50350 424 CL50PL 36 50360 441 CL150PL 36 50380 462 CL254PL 36 50385 36 61352 37 50450 463 CL454PL 37
INDEX (CONT.) GOOD HAND DESTACO CARR LANE PAGE Cam Type Toggle Clamps 60130 38 60131 38 Heavy Duty Weldable Toggle Clamps 701C 39 701D 39 701K 39 702C 39 702D 39 702K 39 70305 503M 39 70310 503MB 39 70315 503MLB 39 70505 505M 39 70510 505MB 39 70515 505MLB 39 70605 506M 39 70610 506MB 39 70615 506MLB 39 75027 527 40 75027SM 527F 40 75048 548 40 75078 578 40 Vertical Handle Hold Down Action Push/Pull Straight Line Action PICTORIAL INDEX Horizontal Handle Hold Down Action PAGES 19 PAGES 1020 Latch Type Pull Action * See the new SecureLock latch clamps FType Clamps 80325 325 CL325PLS 41 80325SS 325SS 41 Pneumatic Power Clamps 10101A 812 CL400PTC 42 12050A 802U CL500PTC 42 12130A 807U CL1001PTC 42 12132A CL1000PTC 42 12265A 810U 42 12275A 810S 42 10247A 847U CL2000PTC 42 10249A 847S CL2001PTC 42 20820A 42 36301A 816 CL600PPC 43 36003A 803 CL1500PPC 43 36330A 830 43 Yoke Assemblies YP3130 43 YP3145 43 YP3160 43 YP3730 43 YP3745 43 YP3760 43 Accessories 44 Appendix 45 Strong Hand Tools Product Lines 46 Toggle Pliers Squeeze Action FType Pull Down Action PAGES 2127 PAGES 2835 Cam Type Hold Down Action Pneumatic Power Heavy Duty Weldable Hold Down Action PAGES 3637 PAGES 38 PAGES 3940 Yoke Assemblies PAGES 4243 PAGE 43 Accessories... 44 Appendix... 45 *Product availability subject to change without notice. PAGE 41 Strong Hand Tools Product Lines... 46
VERTICAL HANDLE TOGGLE CLAMPS 1 Series 101A Cross Ref. : DESTACO Series 201U Holding Capacity: 110 lbs. (50 kg) Weight: 0.13 lb. (60 g) Bar opens 100º, Handle 56º Supplied: GHFC10138 0.35 (9) 4 x Ø 0.17 (4 x Ø 4.4) 0.81 (20.8) 0.63 (16) 0.94 1.31 (23.8) (33.3) One of the most affordable clamps. Thandle and straight base options available. (25.4) GH101A GH101ASS GH101AI GH101AIT GH101AT Description UBar, Flanged Base, Straight Handle Stainless Steel of GH101A UBar, Straight Base, Straight Handle UBar, Straight Base, THandle UBar, Flanged Base, THandle GH101A 3.30 (83.8) 2.93 (74.4) 0.32 (8) 0.62 (15.8) (24.6) 0.08 (2) 0.19 (4.8) 1.06 (27) 2 (50) Series 11002B 2 x Ø A1 B A GH13002B has hardened bushings and removable ground pins. C1 C D E Unique hole pattern for flexibility in a wide range of mounting options. F1 G1 GH13002B Base F G H N J GH11002B GH12002B GH13002B Holding Capacity 165 lbs. (75 kg) 330 lbs. (150 kg) 550 lbs. (250 kg) Supplied Bar Opens Handle Opens GHSA10118 96º 66º GHSA14134 108º 70º A A1 B C C1 D E F F1 G G1 H J K L M N Weight 0.22 (5.6) 0.22 (5.6) GHSA56212 106º 67º 0.32 (8) 0.20 (5) 0.70 (18) 0.25 (6.4) (25.4) 0.35 (8.8) GH13002B 1.32 (33.5) 0.95 (24.2) 1.34 0.56 (34) (14.3) 1.06 (27) 1.65 (42) 2.01 (51.1) 0.50 (12.7) 0.63 (16) (25) K 1.14 (29) 1.38 (35) 1.69 (43) 0.39 (10) 0.51 (13) L 0.87 (22) 1.12 (28) 1.38 (35) 1.50 (38) 1.73 (44) 3.94 (100) 0.10 (2.5) 0.13 (3.2) 3.82 (97) M 0.28 lb. (128 g) 5.63 0.37 lb. (143) (170 g) 0.13 7.72 0.84 lb. (3.2) (196) (380 g)
VERTICAL HANDLE TOGGLE CLAMPS 2 Series 13005 4 x Ø A Cross Ref. : DESTACO Series 305 Bar opens 90º, Handle 175º GH13008 has hardened bushings and removable ground pins. This unique spacesaving clamp is very affordable. B C D E F G H J K GH13005 L M GH13005 Holding Capacity 150 lbs. (68 kg) Supplied GHFC10138 Ø A B C D E F G H J K L M Weight 0.17 (4.4) 0.35 (9) 0.50 (12.7) 0.53 (13.5) 1.03 (26.2) 0.63 (15.9) (25.4) GH13005SS Stainless Steel of GH13005 GH13007 GH13008 UNIQUE 330 lbs. (150 kg) 705 lbs. (320 kg) 13005HB GHFC56212 GHFC38312 0.28 (7) 0.31 (7.9) 0.60 (15.2) 0.77 (19.5) 1.14 (28.9) 1.06 (27) 1.54 (39) 1.73 (44) 2.53 (64.3) 1.16 (29.4) 1.50 (38.1) 1.81 (46) 2.46 (62.7) High Base of GH13005 0.31 (7.9) 1.40 (35.2) 2.31 (58.7) 3.46 (88.1) 0.31 (7.9) 0.50 (12.7) 0.50 (12.7) 0.87 (22.2) 1.31 (33.3) 1.21 (30.8) 1.97 (50.1) 2.66 (67.5) 2.24 (57) 3.69 (93.7) 5.32 (135) 0.13 lb. (60 g) 0.50 lb. (230 g) 1.38 lbs. (630 g) UNIQUE 13005SM & 13007SM GH13005HB (25.4) 1.21 (30.8) 0.53 (13.5) 1.03 (26.2) 0.65 (16.5) 1.02 (26) Side Mount of GH13005 and GH13007 A Unique hole pattern for flexibility in a wide range of mounting options. GH13005SM A B C D E F G H J K L GH13005SM 0.31 (7.9) GH13007SM 0.50 (12.7) 2 (50.8) 3.06 (77.8) 1.20 (30.6) 1.97 (50.1) 2.37 (60.3) 3.80 (96.7) 1.03 (26.2) 1.54 (39.2) 0.68 (17.4) 1.04 (26.3) 0.17 (4.4) 0.28 (7) 0.22 (5.6) 0.37 (9.4) 0.12 (3) 0.16 (4) 0.76 (19.5) (25.4) 1.22 (31) 1.81 (46) B C D E F J H L K G
VERTICAL HANDLE TOGGLE CLAMPS 3 Series 12050 Popular! Ø 0.25 (Ø 6.4) Cross Ref. : DESTACO Series 202 Holding Capacity: 200 lbs. (91 kg) Weight: 0.38 lb. (170 g) Bar opens 100º, Handle 60º Supplied: GHFC14134 (GHSA14112 for GH12050SS) 0.63 (16) 0.87 (22) 0.37 (9.5) 1.06 (27) 1.30 (33) 0.50 (12.7) 0.25 (6.4) 1.06 1.56 (27) (39.7) 4 x Ø 0.20 (4 x Ø 5.2) GH12050 GH12050 GH12050SS GH12050U GH12050UL GH12055 GH12060 GH12065 GH12070 GH12075 GH12080 GH12085 Description Fixed, Flanged Base, Straight Handle Stainless Steel of GH12050 UBar, Flanged Base, Straight Handle Extra Long UBar 2.27 (58 mm) Flanged Base, Straight Handle Fixed, Straight Base, Straight Handle Solid Bar, Flanged Base, Straight Handle Solid Bar, Straight Base, Straight Handle Fixed, Flanged Base, THandle Fixed, Straight Base, THandle Solid Bar, Flanged Base, THandle Solid Bar, Straight Base, THandle GH12050U 3.74 (95) 4.21 (107) 0.38 (9.6) 0.89 (23) 1.30 (33) 0.13 (3.2) (25.4) 2.52 (64) 0.25 (6.4) 1.37 (35) UNIQUE 12050HB High Base of GH12050 4.80 (122) 0.38 (9.6) 1.66 (42.2) UNIQUE 12050SM GH12050HB Side Mount of GH12050 0.38 (9.6) GH12050SM 0.93 (23.5) 0.20 (5.1) 1.06 (27) 1.56 (39.7) 0.20 (5.2) 1.66 (42.2) 2.36 (60) 0.64 (16.2) 1.35 (34.2) 2.52 (64.2)
VERTICAL HANDLE TOGGLE CLAMPS 4 101B 0.33 (8.4) Holding Capacity: 220 lbs. (100 kg) Weight: 0.3 lb. (135 g) Bar opens 90º, Handle 65º Supplied: GHFC14134 0.94 (24) 1.30 (33) 1.38 (35) 0.79 (20) 1.18 (30) 4.69 (119) 0.39 (10) GH101B 2.16 (55) 1.76 (45) 0.6 (15.2) 1.15 (29) 0.55 (14) 0.30 (7.5) 4 x Ø 0.19 (4 x Ø 4.8) 102B Holding Capacity: 220 lbs. (100 kg) Weight: 0.25 lb. (115 g) Bar opens 90º, Handle 65º Supplied: GHFC14134 0.33 (8.4) 4 x Ø 0.19 (4 x Ø 4.8) 0.94 (24) 0.55 (14) 1.54 (39) 1.14 (29) 0.71 1.10 (18) (28) 3.68 (94) 0.39 (10) 0.76 0.08 (2) GH102B 1.54 (39) 1.14 (29)
VERTICAL HANDLE TOGGLE CLAMPS 5 106B 0.30 (7.6) Holding Capacity: 220 lbs. (100 kg) Weight: 0.4 lb. (184 g) Bar opens 82º, Handle 55º Supplied: GHFC14134 (19.1) 1.06 (27) 1.36 (35) 1.13 (29) 5.50 (140) 0.41 (10) 1.25 (32) 0.25 (6.5) 1.50 (38) 0.50 (13) 0.50 (13) GH106B 6 x Ø 0.19 (6 x Ø 4.8) 12205 6.50 (165) Holding Capacity: 400 lbs. (182 kg) Weight: 1.36 lbs. (620 g) Bar opens 100º, Handle 57º Supplied: GHFC56212 0.32 (8.1) 3.12 (79.4) 4 x Ø 0.28 (4 x Ø 7.2) 1.13 (28.6) 1.94 (49.2) 1.37 (35) 2.12 (54) 7.87 (200) 2 (51) 0.13 (3.2) 4.18 (106.3) 6.39 (162.4) GH12205
VERTICAL HANDLE TOGGLE CLAMPS 6 Series 12130 Popular! Cross Ref. : DESTACO Series 207 Holding Capacity: 500 lbs. (227 kg) Bar opens 100º, Handle 60º Supplied: GHFC56212 0.58 (14.7) 0.33 (8.3) 1.87 (47.6) 2.81 (71.4) 1.25 (31.8) 1.81 (46) 4 x Ø 0.28 (4 x Ø 7.2) Expanded Selection. This is the most popular vertical handle toggle clamps. Many options are available. Description Weight GH12130 Short UBar, Flanged Base, Straight Handle 0.78 lb. (355 g) GH12130SS Stainless Steel of GH12130 GH12131 Short Ubar, Flanged Base, THandle 0.81 lb. (370 g) GH12132 Long UBar, Flanged Base, Straight Handle 0.81 lb. (370 g) GH12133 Long UBar, Flanged Base, THandle 0.88 lb. (400 g) GH12135 Short UBar, Straight Base, Straight Handle 0.78 lb. (355 g) GH12136 Short UBar, Straight Base, THandle 0.81 lb. (370 g) GH12137 Long UBar, Straight Base, Straight Handle 0.81 lb. (370 g) GH12138 Long UBar, Straight Base, THandle 0.88 lb. (400 g) GH12140 Short Solid Bar, Flanged Base, Straight Handle lb. (340 g) GH12141 Short Solid Bar, Flanged Base, THandle 0.78 lb. (355 g) GH12142 Long Solid Bar, Flanged Base, Straight Handle 0.78 lb. (355 g) GH12143 Long Solid Bar, Flanged Base, THandle 0.81 lb. (375 g) GH12145 Short Solid Bar, Straight Base, Straight Handle lb. (340 g) GH12146 Short Solid Bar, Straight Base, THandle 0.78 lb. (355 g) GH12147 Long Solid Bar, Straight Base, Straight Handle 0.78 lb. (355 g) GH12148 Long Solid Bar, Straight Base, THandle 0.81 lb. (375 g) GH12130 6.06 (154) 5.50 (140) 0.63 (16) 1.25 (32) 0.13 (3.2) 2.81 (71.4) 1.37 (35) 4.56 (116) 3.75 (95.2) 5.50 (139.7) 1.81 (46) 0.28 (7.1) UNIQUE 12130HB High Base of GH12130 0.63 (16) 6.50 (165) 2.25 (57) 2.81 (71) 1.75 (45) UNIQUE 12130SM Side Mount of GH12130 GH12130HB 0.63 (16) 1.12 (28.5) 0.12 (3) 0.28 (7.2) 0.96 (24) 2.62 (66.7) GH12130SM 0.69 (17.5) 1.81 (46) 0.24 (6.1) 0.25 (6.4) 1.18 (30) 2.69 (68) 1.88 (48)
VERTICAL HANDLE TOGGLE CLAMPS 7 Series 12265 Popular! Cross Ref. : DESTACO Series 210U(SS) Holding Capacity: 750 lbs. (340 kg) Bar opens 105º, Handle 58º Supplied: GHFC38312 (GHSA38300 for GH12265SS) Hardened bushings and removable ground pins 0.43 (11) 2.46 (62.5) 4 x Ø 0.34 (4 x Ø 8.7) 1.94 (49.2) 1.78 2.53 (45.3) (64.3) 1.25 (31.8) Description Weight GH12265 8.82 (224) 7.50 (202) GH12265 UBar, Flanged Base, Straight Handle 1.40 lbs. (635 g) GH12265SS Stainless Steel of GH12265 GH12270 UBar, Straight Base, Straight Handle 1.40 lbs. (635 g) GH12275 Solid Bar, Flanged Base, Straight Handle 1.50 lbs. (680 g) GH12280 Solid Bar, Straight Base, Straight Handle 1.50 lbs. (680 g) GH12285 UBar, Flanged Base, THandle 1.57 lbs. (710 g) GH12290 UBar, Straight Base, THandle 1.57 lbs. (710 g) GH12295 Solid Bar, Flanged Base, THandle 1.62 lbs. (735 g) GH12300 Solid Bar, Straight Base, THandle 1.62 lbs. (735 g) 1.75 (45) 2.63 (67) 0.13 (3.2) 0.37 (9.5) 1.25 (31.8) 3.25 (82.5) 1.94 (49.2) 5.45 (138.5) Series 12305 Holding Capacity: 750 lbs. (364 kg) Weight: 2.18 lbs. (990 g) Bar opens 100º, Handle 65º Supplied: GHFC38312 Note the angular spindle bar. Available with open or solid spindle bars. Solid bar can be shortened, and the supplied bolt retainer welded on. Angular bar keeps the overall height low, yet bar clearance high. 0.77 (19.2) 0.38 (9.6) 0.56 (14.3) 1.63 (41.3) 4 x Ø 0.31 (4 x Ø 7.9) 0.37 (9.5) 2.06 (52.4) 1.25 (31.8) 2.13 (54) 1.13 (28.6) 8.62 (219) 9.69 (246) (25.4) 0.87 (22.2) Description 2.50 (64) 0.19 (4.8) GH12305 Open bar, Flanged Base GH12310 Open Bar, Straight Base GH12315 Solid Bar, Flanged Base GH12320 Solid Bar, Straight Base GH12305 4.56 (116) 0.4 (11)
VERTICAL HANDLE TOGGLE CLAMPS 8 Series 10444 Welder s Choice! Holding Capacity: 880 lbs. (400 kg) Bar opens: 85º, Handle 58º Supplied: GHSA38300 (GHSA38200 for GH10448) Hardened bushings and removable ground pins This rugged yet smooth functioning clamp is designed for use in ovens. It has a rounded handle with no plastic cover. 9.37 (238) (25.4) GH10448 2 (50.8) 4 x Ø 0.41 (4 x Ø 11) Description Weight GH10444 Long Bar 1.92 lbs. (870 g) GH10448 Short Bar 1.85 lbs. (840 g) 0.24 (6) 1.42 (36) 2.24 (57) 1.18 (30) 1.57 (40) 1.97 (50) 2.76 (70) Series 10247 1.78 (45.2) Cross Ref. : DESTACO Series 247 Holding Capacity: 1,000 lbs. (450 kg) Weight: 2.76 lbs. (1,250 g) Bar opens 100º, Handle 58º (with roll pin) Bar opens 135º, Handle 70º (without roll pin) Supplied: GHSA12300 Hardened bushings and removable ground pins 0.53 (13.4) 3.13 (79.4) 4 x Ø 0.34 (4 x Ø 8.7) 2.53 (64.3) 8.87 (225) 9.50 (241) 0.89 (22.6) Roll Pin Position Description 2 (51) 2.63 (67) 0.20 (5) 0.13 (3.2) 0.37 (9.5) GH10247 GH10248 GH10249 UBar, Flanged Base UBar, Straight Base Solid Bar, Flanged Base 5 (126.4) 1.25 (31.8) 2 (50.8) GH10250 Solid Bar, Straight Base GH10247
VERTICAL HANDLE TOGGLE CLAMPS 9 Series 101J Cross Ref. : DESTACO Series 267 Holding Capacity: 1,200 lbs. (550 kg) Weight: 5.6 lbs. (2,540 g) Bar opens 100º, Handle 48º (with roll pin on top) Bar opens 140º, Handle 60º (with roll pin on bottom) Supplied: GHSA58500 Hardened bushings and removable ground pins 0.66 (17) 0.50 (13) 3 (76.2) 2 (51) 2.75 3.75 (70) (95.2) 12 (305) 6.02 (153) Roll Pin 1.25 (31.8) Top Pin Pos. 3.25 (83) Bottom Pin Pos. GH101J GH101JS Description UBar, Flanged Base Solid Bar, Flanged Base GH101J 0.24 (6)
HORIZONTAL HANDLE TOGGLE CLAMPS 10 Series 22005 Holding Capacity: 50 lbs. (22.7 kg) Weight: 0.06 lb. (25 g) Bar opens: 90º, Handle 60º Supplied: GHSA08034 (Nylon) 0.94 (23.8) 0.63 (16) 0.38 (9.6) 0.19 (4.76) 0.09 (2.4) 0.17 (4.4) 0.41 (10.4) Low GH22025 0.53 (13.5) 0.95 (24.2) 0.40 (10.2) GH22005 GH22010 GH22025 GH22030 Description High Bar, Flanged Base High Bar, Straight Base Low Bar, Flanged Base Low Bar, Straight Base 0.47 (12) 0.40 (10.2) 1.03 (26.14) 0.15 (4) 0.63 (15.9) 0.94 (23.8) 2.81 (71.46) 0.05 (1.2) Series 201 Cross Ref.: DESTACO Series 205 Holding Capacity: 60 lbs. (27 kg) Weight: 0.09 lb. (40 g) Bar opens: 90º, Handle 80º Supplied: GHSA08034 (Nylon) This compact clamp is the most economical horizontal toggle clamp. Most suitable for holding down sheet metal or circuit boards. Many spindle bar and base combinations available. 0.94 (23.8) 0.31 (8) 0.63 (16) 0.19 (5) Ø 0.17 (Ø 4.3) GH201 Series 0.79 (20) 3.11 (79) 0.17 (4.4) Ø 0.37 (Ø 9.5) GH201A Series Description 0.13 (3.2) GH201 GH201SS GH201I GH201L GH201R GH201A GH201ASS GH201AI GH201AL GH201AR UBar, Flanged Base Stainless Steel of GH201 UBar, Straight Base UBar, Left Hand Flanged Base UBar, Right Hand Flanged Base Fixed Bar, Flanged Base Stainless Steel of GH201A Fixed Bar, Straight Base Fixed Bar, Left Hand Flanged Base Fixed Bar, Right Hand Flanged Base GH201 GH201A 0.67 (17) 1.02 (26) 0.38 (9.7) 0.16 (3.95) 0.72 (18.3) 0.9 (23) 0.06 (1.5) 0.44 (11.1) 0.63 (15.9) 0.94 (23.8) 3.2 (81.2) 0.71 (18)
HORIZONTAL HANDLE TOGGLE CLAMPS 11 20800 & 20800SS Holding Capacity: 66 lbs. (30 kg) Weight: 0.09 lb. (40 g) Bar opens: 80º, Handle 88º Supplied 0.16 (4) 0.77 (19.6) 0.45 (11.5) 0.33 (8.3) 0.17 (4.2) 0.22 (5.5) GH20800 1.25 (32) 0.86 (22) 0.49 (12.5) 0.35 (9) Description 0.24 0.55 (6) (14) 1.10 (28) 0.55 (14) 0.95 (24) 0.06 (1.6) GH20800 Flanged Base GH20800SS Stainless Steel of GH20800 3 (76.2) 20300 Holding Capacity: 66 lbs. (30 kg) Weight: 0.22 lb. (100 g) Bar opens: 65º, Handle 55º Supplied 1.18 (30) 0.87 (22) 0.20 (5) 4 x Ø 0.18 (4 x Ø 4.5) 0.35 (9) (25.4) 0.16 (4) GH20300 0.95 (24) 1.48 (37.5) 1.44 (36.5) 4.33 (110)
HORIZONTAL HANDLE TOGGLE CLAMPS 12 22100 & 22105 Holding Capacity: 150 lbs. (68 kg) Weight: 0.24 lb. (110 g) Bar opens: 90º, Handle 90º Supplied: GHFC14134 0.25 (6.4) 4 x Ø 0.21 (4 x Ø 5.3) 0.87 (22.1) 1.37 (35) Almost identical to the 201B model (pg. 13). Lighter and more affordable. 0.50 (12.7) 83º 70º GH22100 1.59 (40.3) (25.4) 0.06 (1.5) GH22100 GH22105 Description Flanged Base Straight Base 2.46 (62.5) 1.06 (27) 1.56 (40) 5.59 (141.9) 0.25 (6.35) Series 20752B A B C D Bar opens: 94º, Handle 76º Supplied. 4 x Ø E1 E The hunch back design leaves extra room for your fingers. All models have the red ribbed handles and come with hex bolt spindles. F 20752B Base G H J K G GH21502B GH20752B GH21502B GH22502B Holding Capacity 165 lbs. (75 kg) 330 lbs. (150 kg) 550 lbs. (250 kg) A B C D E Ø E1 F G H J K L M N Weight 1.06 (27) 1.57 (40) 1.85 (47) 1.10 (28) 1.22 (31) 0.87 (22) 1.02 (26) 0.21 (5.3) 0.24 (6.2) 0.35 (9) 0.22 (5.5) 0.26 (6.6) 0.20 (5.2) 0.66 (16.8) 0.53 (13.5) 1.02 (26) 1.02 (26) L 0.37 (9.5) 0.55 (14) 0.69 (17.5) (25.1) 1.34 (34) M 0.08 (2) 0.10 (2.5) 0.12 (3) N 1.41 (36) 2.44 (62) 3.11 (79) (25) 1.50 (38) 1.65 (42) 4.11 (104) 6.73 (171) 8.62 (219) 0.22 lb. (100 g) 0.50 lb. (230 g) 0.95 lb. (430 g)
HORIZONTAL HANDLE TOGGLE CLAMPS 13 Series 201B Popular! 0.25 (6.3) Cross Ref.: DESTACO Series 215 Holding Capacity: 200 lbs. (90 kg) Weight: 0.29 lb. (130 g) Bar opens: 85º, Handle 60º Supplied: GHFC14134 For Solid Bar A Ø B 0.22 (5.5) C (25.4) 1.06 (27) 1.45 (37) 0.87 1.42 (22) (36) GH201B Description A Ø B C GH201B UBar, Flanged Base 0.29 (7.4) GH201BSS Stainless Steel of GH201B 0.29 (7.4) GH201BI UBar, Straight Base 0.29 (7.4) GH201BS Solid Bar, Flanged Base 0.28 (7.1) 0.16 (4) GH201BSI Solid Bar, Straight Base 0.28 (7.1) 0.16 (4) UNIQUE 201BHB High Base of GH201B Weight: 0.32 lb. (146 g) 0.50 (12.7) (25.1) 2.24 (56.9) 85º 0.08 (2) 5.65 (143.5) 0.5 (12) 60º 85º 73º 0.50 (12.7) GH201BHB 1.66 (42.2) UNIQUE 201BSM 2.17 (55.1) 1.45 (36.8) Side Mount of GH201B Weight: 0.36 lb. (163 g) 0.50 (12.5) GH201BSM 1.04 (26.4) 0.12 (3) 0.70 (17.8) 0.24 (6.1) 0.87 (22.1) 1.42 (36) 0.20 (5.1) 0.69 (17.4) 1.77 (45) 2.10 (53.25) 1.73 (44)
HORIZONTAL HANDLE TOGGLE CLAMPS 14 20820 Cross Ref.: DESTACO 317U Holding Capacity: 220 lbs. (100 kg) Weight: 0.88 lb. (400 g) Bar opens: 185º, Handle 60º Supplied: GHFC56212 Mount vertically and horizontally 0.35 (9) 0.35 (9) 1.26 (32) 8 x Ø 0.26 (8 x Ø 6.7) 0.63 (16) (25.4) 1.50 (38) 0.63 (16) 4.50 (114) 185º GH20820 6.41 (163) 2.75 (70.1) 1.26 (32) 2.56 (65) 1.38 (35) 4.42 (112.3) Series 203F & 202F Holding Capacity: 500 lbs. (227 kg) Bar opens: 85º, Handle 58º Supplied: GHFC56212 1.85 (47) 1.14 (29) 0.31 (8) 4 x Ø 0.28 (4 x Ø 7) GH203F 0.63 (16) 1.34 (34) 0.12 (3) 1.61 (41) A 2.24 (57) 7.80 (198) GH202FL 0.63 (16) Description A Weight GH203F GH203FL GH202F GH202FL UBar, Flanged Base Long UBar, Flanged Base UBar, Side Mounted Long UBar, Side Mounted 2.24 (57) 3.70 (94) 2.05 (52) 3.50 (89) lb. (340 g) 0.84 lb. (380 g) 0.85 lb. (385 g) 0.94 lb. (425 g) 2.26 (60) 1.65 (42) (25.4) 0.12 (3) A 2.42 (62) 7.80 (198)
HORIZONTAL HANDLE TOGGLE CLAMPS 15 Series 225D Popular! Cross Ref.: DESTACO Series 225 Holding Capacity: 500 lbs. (227 kg) Weight: 0.59 lb. (265 g) Bar opens: 90º, Handle 65º Supplied: GHFC56212 This is the most popular horizontal handle toggle clamp. See Series GH22165 for extra long UBars. 1.42 0.87 (35) (22.2) 0.34 (8.7) 4 x Ø 0.26 (4 x Ø 6.7) 0.82 (20.8) 0.50 (12.7) 1.37 (35) 1.90 (48.3) GH225D GH225D GH225DSS GH225DI Description UBar, Flanged Base Stainless Steel of GH225D UBar, Straight Base 0.25 (6.4) (25.4) 2.75 (70) 1.50 (38) 6.81 (173) 0.26 (6.7) UNIQUE 225DHB 6.61 (168) High Base of GH225D Weight: 0.63 lb. (286 g) 0.50 (12.7) 2.13 (54) GH225DHB 2.75 (70) 1.50 (38) UNIQUE 225DSM Side Mount of GH225D Weight: 0.69 lb. (315 g) 0.26 (6.7) 0.50 (12.7) 1.07 (27) 1.07 (27.3) 0.65 (17) 2.65 (67) GH225DSM 0.23 (5.9) 1.13 (28.6) 1.71 (43.4) 2.63 (66.8) 1.95 (49.4)
HORIZONTAL HANDLE TOGGLE CLAMPS 16 Series 22165 Holding Capacity: 550 lbs. (250 kg) Bar opens: 96º, Handle 88º Supplied: GHFC56212 1.37 0.87 (35) (22) 0.33 (8.4) Expanded selection. Larger version of Series 225D B 0.28 (7.1) Ø 0.33 (Ø 8.3) 0.25 (6.4) 1.25 (32) 0.56 (14.3) C A 0.13 (3.2) GH22165 Description A B C D Weight GH22165 Short UBar, Flanged Base 2.81 GH22170 GH22175 Short UBar, Straight Base Short Solid Bar, Flanged Base 1.31 (33.3) (71.4) 2.99 GH22180 Short Solid Bar, Straight Base (76) 1.81 (46) 7.28 (185) 0.63 lb. (285 g) 0.66 lb. (300 g) B 0.25 (6.4) (25.4) 1.25 (32) 2.19 (56) D GH22185 Long UBar, Flanged Base 6.50 GH22190 GH22195 Long UBar, Straight Base Long Solid Bar, Flanged Base 1.13 (28.6) (165) 6.56 GH22200 Long Solid Bar, Straight Base (167) 1.63 (41) 10.99 (279.2) 0.78 lb. (360 g) 0.81 lb. (365 g) 21383 Holding Capacity: 550 lbs. (250 kg) Weight: 0.46 lb. (209 g) Bar opens: 72º, Handle 72º Supplied: GHSA56212 1.50 (38) 0.37 (9.4) (25) 4 x Ø 0.28 (4 x Ø 7) 0.55 (14) 2 (51) 1.26 (32) 0.79 (20) GH21383 1.54 (39) 0.09 (2.3) 7.83 (199)
HORIZONTAL HANDLE TOGGLE CLAMPS 17 25383 Holding Capacity: 600 lbs. (280 kg) Weight: 0.96 lb. (435 g) Bar opens: 80º, Handle 80º Supplied 1.73 1.10 (44) (28) 0.43 (11) 4 x Ø 0.28 (4 x Ø 7) 0.79 (20) GH25383 2.80 (71) 1.50 (38) 0.91 (23) 0.12 (3) 3.15 (80) 2.56 (65) 9.76 (248) 22235 Holding Capacity: 600 lbs. (273 kg) Weight: 1.41 lbs. (640 g) Bar opens: 111º, Handle 94º Supplied: GHFC56212 2.25 (57) 1.63 1.31 (41) (33) 0.31 (8) Ø 0.33 (Ø 8.3) Ø 0.26 (Ø 6.7) 0.69 (17.5) GH22235 1.81 (46) 0.16 (4) 4.09 (104) 1.63 (41.3) 2 (50.8) 3.13 (79.4)
HORIZONTAL HANDLE TOGGLE CLAMPS 18 25382 Holding Capacity: 620 lbs. (280 kg) Weight: 0.84 lb. (380 g) Bar opens: 80º, Handle 80º Supplied 2.24 1.46 (57) (37) 0.47 (12) 4 x Ø 0.41 (4 x Ø 11) GH25382 0.79 (20) 1.44 (37) 0.12 (3) 3.35 (85) 1.18 (30) 2.24 (57) Series 20235 Holding Capacity: 750 lbs. (340 kg) Weight: 1.41 lbs. (640 g) Bar opens: 85º, Handle 50º Supplied: GHFC38312 0.43 (11) 2.25 1.63 (57.2) (41.3) 4 x Ø 0.33 (4 x Ø 8.3) GH20235 1.75 (44.4) 2.45 (62.2) 0.16 (4) GH20235 GH20235SS GH20236 Description UBar, Flanged Base Stainless Steel of GH20235 UBar, Straight Base 0.31 (7.95) 4.26 (108.3) 1.63 (41.3) 2.25 (57.1) 11.64 (295.6)
HORIZONTAL HANDLE TOGGLE CLAMPS 19 Series 200W Holding Capacity: 880 lbs. (400 kg) Bar opens: 84º, Handle 85º Woodworking models These clamps have an extra high and long spindle bar. The 220WH and 220WLH have an extra lever to increase clamping leverage. 1.96 (50) 1.18 (30) 0.50 (12.6) 4 x Ø 0.39 (4 x Ø 10) GH200W 0.81 (20.5) A B 1.65 (42) 2.76 (70) C GH220WH GH220WLH GH200WLH A B C Weight GH200W GH200WL GHFC38312 2.13 (54) 2.36 (60) 4.33 (110) 9.45 (240) 11.42 (290) 1.32 lbs. (600 g) 1.41 lbs. (640 g) GH200WH 2.36 (60) 9.45 (240) 1.54 lbs. (700 g) GH200WLH GH220WH GHFC38412 3.11 (79) 4.33 (110) 2.36 (60) 11.42 (290) 9.45 (240) 1.64 lbs. (745 g) 1.74 lbs. (790 g) GH220WLH 4.33 (110) 11.42 (290) 1.83 lbs. (830 g)
HORIZONTAL HANDLE TOGGLE CLAMPS 20 Series 204GB Holding Capacity: 1,400 lbs. (630 kg) Bar opens: 91º, Handle 94º Supplied: GHSA12300 This clamp is based on the GH204G design, without the cast iron base. 2.80 (71) 2 (51) 0.50 (12.7) 4 x Ø 0.37 (4 x Ø 9.5) (25.4) A 0.24 (6) GH204GB 2.24 (57) C 3.27 (83) B GH204GBLH Description A B C Weight GH204GB GH204GBL GH204GBLH Short Bar, Low Base Long Bar, Low Base Long Bar, High Base 1.77 (45) 1.77 (45) 2.79 (71) 10.59 (269) 12.44 (316) 12.44 (316) 3.15 (80) 5 (127) 5 (127) 2.60 lbs. (1,180 g) 2.78 lbs. (1,260 g) 3.23 lbs. (1,465 g) Series 204G Holding Capacity: 1,400 lbs. (636 kg) Weight: 2.69 lbs. (1,220 g) Bar opens: 91º, Handle 94º Supplied: GHSA12300 1.89 (48) 1.18 (30) 0.50 (12.7) Heavy Duty This clamp has five mounting holes on the cast iron base. Constructed with extra thick plate stock with hardened ground pins and bushings for smooth action and long life. GH204G 4.94 (125) 4 x Ø 0.33 (4 x Ø 8.3) 12.48 (317) GH204GL (25.4) GH204G 2 (51) 0.39 (10) 0.50 (13) GH204G GH204GL Description Open Bar, Ductile Iron Base Long Closed Bar, Ductile Iron Base 1.38 (35) 1.38 (35) 3 (76.2) 3.54 (90) 10.55 (268)
PUSH/PULL TOGGLE CLAMPS 21 301A & 301B Cross Ref.: DESTACO 601 Holding Capacity: 100 lbs. (45 kg) Weight: 0.11 lb. (50 g) Handle opens: 190º Plunger stroke: 0.63 (15.9 mm) supplied: GHSA08034 (Nylon) 0.63 (15.9) 0.25 (6.4) 1/420 THD 3 x Ø 0.17 (3 x Ø 4.4) 1.55 (39.4) 2.85 (72.4) GH301B 0.63 (15.9) 1.30 (33) 0.39 (10) 1.06 (27) Economical, miniature pushpull clamp with long plunger stroke. GH301A 832 THD GH301A GH301B Description 832 Thread 1/420 Thread GH301A 1.71 (43.5) 0.50 (12.7) 1.37 (35) 2.67 (68) 36006 Holding Capacity: 110 lbs. (50 kg) Weight: 0.15 lb. (70 g) Handle opens: 93º Plunger stroke: 0.43 (11 mm) supplied 1.42 (36) (25.3) 4 x Ø 0.21 (4 x Ø 5.3) 2.48 (63) 0.85 (21.6) M4 0.59 (15) UNIQUE 36070 REVERSE ACTION GH36006 0.06 (1.6) 0.59 (15) 0.39 0.55 (10) D (14) E 1.18 (30) 4.29 (109) Holding Capacity: 110 lbs. (50 kg) Weight: 0.22 lb. (100 g) Handle opens: 66º Plunger stroke: 0.39 (10 mm) supplied 1.61 (41) 1.10 (28) Ø 0.32 (Ø 8) M5 0.30 (7.5) 0.71 (18) 4 x Ø 0.20 (4 x Ø 5.2) 0.59 (15) GH36070 0.49 (12.5) 0.51 (13) 2.83 (72) 0.94 (24) 1.77 (45) 5.1 (128.5)
PUSH/PULL TOGGLE CLAMPS 302F & 302FSS Popular! 22 Cross Ref.: DESTACO 605 Holding Capacity: 300 lbs. (136 kg) Weight: 0.66 lb. (300 g) Handle opens: 180º Plunger stroke: 1.25 (32 mm) supplied: GHSA56200 Stainless Steel model GH302FSS available 2.20 (56) 1.61 (41) 4 x Ø 0.20 (4 x Ø 5.5) The best selling midsize pushpull clamp. Accepts all 5/1618 spindles. 3.21 (81.6) 5/1618 THD 0.96 (24.6) UNIQUE 302D & 30282 GH302F REVERSE ACTION 0.28 (7) 1.38 (35) 1.98 (50.3) 3.55 (90.2) Holding Capacity: 350 lbs. (160 kg) Weight: 1.00 lb. (454 g) Handle opens: 45º Plunger stroke: 0.47 (12 mm) Stainless Steel model GH302FSS available Plunger locks in extended position only. 2.83 (72) 2 (51) 3/824 4 x Ø 0.25 (4 x Ø 6.3) GH302D GH30282 Description Flanged Base Straight Base GH302D 0.85 (22) 1.68 (43) 0.12 (3) 0.41 (10.5) 1.57 (40) 3 (76) 2.76 (70) 8.46 (215) 36092 Cross Ref.: DESTACO 609 Holding Capacity: 400 lbs. (180 kg) Weight: 0.85 lb. (397 g) Handle opens: 180º Plunger stroke: 1.25 (31.8 mm) supplied: GHSA56200 Accepts all 5/1618 diameter spindles Similar to GH302F. Addition of safety pins minimizes finger pinch. 2.20 (55.6) 3.35 (85) 1.62 (41.2) Ø 0.50 (Ø 12.7) 5/1618 THD 4 x Ø 0.20 (4 x Ø 5.2) 0.97 (24.6) Deep (25.4 Deep) 0.12 (3) 0.28 (7) 1.34 (34) GH36092 1.88 (47.8) 3.60 (91.5)
PUSH/PULL TOGGLE CLAMPS 23 36020 Ø 0.47 (Ø 12) Holding Capacity: 400 lbs. (180 kg) Weight: 0.76 lb. (345 g) Handle opens: 145º Plunger stroke: 1.18 (30 mm) supplied: GHSA56200 Accepts all 5/1618 diameter spindles 1.97 (50) 4 x Ø 0.26 (4 x Ø 6.5) 1.34 (34) 3.86 (98) 5/1618 THD 0.79 (20) 0.12 (3) GH36020 0.31 (8) 1.57 (40) 4.92 (125) 1.38 (35) 36003 Cross Ref.: DESTACO 603 Holding Capacity: 600 lbs. (272 kg) Weight: 0.78 lb. (355 g) Handle opens: 180º Plunger stroke: 1.25 (31.8 mm) supplied: GHSA56200 Accepts all 5/1618 diameter spindles This clamp has a forged alloy steel base, and lower profile handle. 1.87 (47.6) 3.35 (85) 1.31 (33.3) Ø 0.44 (Ø 10.9) 0.97 (24.6) 5/1618 THD 1.25 (31.8) (25.4) 4 x Ø 0.22 (4 x Ø 5.6) GH36003 0.19 (4.8) 1.44 (36.5) 1.99 (50.5) 2.28 (58) 4.82 (122.5) UNIQUE 30290 & 30292 REVERSE ACTION Holding Capacity: 650 lbs. (295 kg) Weight: 2.80 lbs. (1,270 g) Handle opens: 45º Plunger stroke: 0.9 (23 mm) Plunger locks in extended position only. 3.27 (83) 2.27 (57.7) 0.94 (24) 1/213 THD 4 x Ø 0.35 (4 x Ø 9) GH30290 GH30292 Description Flanged Base Straight Base GH30290 1.92 (49) 2.64 (67) 0.18 (4.5) 0.48 (12.2) 1.97 (50) 2.43 (61.7) 3.62 (92) 12.17 (309)
PUSH/PULL TOGGLE CLAMPS UNIQUE 36060 REVERSE ACTION 24 Cross Ref.: DESTACO 620 Holding Capacity: 660 lbs. (300 kg) Weight: 1.36 lbs. (615 g) Handle opens: 76º Plunger stroke: 1.10 (28 mm) supplied Accepts all M8 diameter spindles Plunger locks in extended position only. 2.20 (56) 1.57 (40) Ø 0.61 (Ø 15.6) M8 THD 4 x Ø 0.33 (4 x Ø 8.5) 1.69 (43) 0.13 (3.2) GH36060 1.57 (40) 1.46 (37) 2.24 (57) 0.35 (9) 12.05 (305) 30607 LOW PROFILE 2.19 (56) 0.50 (13) 1.63 (41.3) Cross Ref.: DESTACO 607 Holding Capacity: 700 lbs. (318 kg) Weight: 1.54 lbs. (700 g) Handle opens: 180º Plunger stroke: 1.63 (41.3 mm) supplied: GHSA56200 Accepts all 5/1618 diameter spindles 3.28 (83) (25.4) 5/1618 THD 6 x Ø 0.28 (6 x Ø 7.1) GH30607 0.69 (17.5) 0.19 (4.8) 0.63 1.37 (34.9) 1.63 (41.3) (16) 1.72 (43) 4.31 (110) 36010 & 36012 Cross Ref.: DESTACO 610, 618 Holding Capacity: 800 lbs. (364 kg) Weight: 1.76 lbs. (800 g) Handle opens: 180º Plunger stroke: 1.63 (41.3 mm) supplied: GHSA38300 Accepts all 3/816 diameter spindles Constructed with heavy gage sheet metal, this is an economical long stroke pushpull clamp. GH36010 GH36012 Description Flanged Base Straight Base GH36010 2.25 (57.2) 4.80 (122) 1.63 (41.3) Ø 0.62 (Ø 15.7) 1.75 (44) 2.56 (65) 3/816 THD 0.25 (6) 4 x Ø 0.34 (4 x Ø 8.7) 0.31 (8) 1.63 (41.3) 1.91 (48.6) 2.25 (57.2) 3.87 (98) 6.74 (171.3)
PUSH/PULL TOGGLE CLAMPS 25 303EK Holding Capacity: 1,000 lbs. (454 kg) Weight: 2.13 lbs. (965 g) Handle opens: 190º Plunger stroke: 1.97 (50 mm) 2.52 2.32 (64) (59) 0.35 (9) 3.07 (78) This clamp has a key way to keep the plunger from rotating. 5.71 (145) 1/213 THD GH303EK (25.4) 1.81 (46) 0.16 (4) 2.44 (62) 6.22 (158) 3.62 (92) 36330 Cross Ref.: DESTACO 630 Holding Capacity: 2,500 lbs. (1,135 kg) Weight: 2.06 lbs. (935 g) Handle opens: 180º Plunger stroke: 2 (50.8 mm) supplied Accepts all 3/816 diameter spindles This heavy duty clamp has a forged alloy steel base. UNIQUE 30250 & 30450 GH36330 2.25 (57) 1.63 (41.3) Ø 0.62 (Ø 15.9) 2.95 (75) 3/816 THD 0.81 (20.6) 1.26 (32) 0.24 (6) 0.50 (12.7) 2 (50.8) 1.37 (34.9) A 1.63 (41.3) 6 x Ø 0.34 (6 x Ø 8.7) 5 (127.8) This pushpull clamp has a small, special spacesaving base that easily detaches for reverse positioning. Supplied. Ø B C D E F G H J 45º M N K Ø L GH30250 GH30450 Holding Capacity 550 lbs. (250 kg) 990 lbs. (450 kg) Handle Opens 190º 185º GH30450 Plunger Stroke 1.26 (32) 1.50 (38) A Ø B C D E F G H J K Ø L M N P Q R Weight 0.26 (6.5) 0.33 (8.5) 1/420 3/816 0.47 (12) 0.79 (20) 0.16 (4) 0.18 (4.5) 0.67 (17) 0.87 (22) 0.39 (10) 0.51 (13) 1.18 (30) 1.18 (30) 1.65 (42) 1.77 (45) 2.24 (57) 2.52 (64) P 3/416 14 0.43 (11) 0.63 (16) Q 5.35 (136) 6.81 (173) 3.35 (85) 4.72 (120) 2 (51) 2.34 (60) 0.91 (23) 1.18 (30) 0.98 (25) 1.18 (30) R 0.85 lb. (385 g) 1.70 lbs. (774 g)
PUSH/PULL TOGGLE CLAMPS 26 Series 36202 T THD Supplied with jam nut on the work side. supplied. B All three of these plunger type push/pull clamps have threaded collars for mounting in threaded, or through holes. All clamps are supplied with thin lock nuts. Threaded mounting plates and brackets are also available as options. D E A F THD, G Deep Ø H J K GH36205 GH36225 Description GH36205 Mounting Bracket for GH36204 GH36225 Mounting Bracket for GH36224 GH36224 L Cross Ref. DESTACO GH36202 602 GH36204 604 Holding Capacity Plunger Stroke 200 lbs. 0.80 (91 kg) (20.3) 300 lbs. 1.57 (136 kg) (40) A B D E F G Ø H J K L T Weight 2.53 (64.3) 4.31 (109.5) 0.95 (24) 1.13 (28.6) 0.91 (23) (25.4) 0.25 (6.4) 0.25 (6.4) 1/420 5/1618 0.62 (15.8) (25.4) 0.37 (9.4) 0.43 (10.9) GH36204SS 604SS Stainless Steel of GH36204 GH36224 624 700 lbs. (318 kg) 2.63 (66.7) 6.66 (169.2) 1.57 (40) 1.61 (41) 0.25 (6.4) 3/816 1.26 (32) 0.63 (15.9) 0.84 (21.3) 1.60 (40.7) 2.72 (69) 0.50 (12.7) 0.63 (16) 0.87 (22) 3.07 (78) 3.86 (98) 5.63 (143) 5/818 3/416 0.25 lb. (113 g) 0.60 lb. (270 g) 14 1.52 lbs. (690 g) Series 304 & 305 All six of these push/pull clamps have a ductile iron base for close fit machining, strength and durability. All the shafts are ground to fit the reamed hole, so the plunger can be used for locating purposes as well as clamping. The plunger locks in both forward and retracted positions. The H model clamps are made with hardened pins and bushings for durability. A B C GH304 Series 4 x Ø D GH305 Series E E G THD H Deep GH305C Description Holding Capacity Supplied GH304C 45º Handle 500 lbs. (227 kg) GH305C 90º Handle 500 lbs. (227 kg) GHSA56200 GH304E 45º Handle 850 lbs. (386 kg) GH305E 90º Handle 850 lbs. (386 kg) GHSA38300 GH304H 45º Handle 1,500 lbs. (680 kg) GHSA12300 GH305H 90º Handle 1,500 lbs. (680 kg) Plunger Stroke 1.26 (32) 1.65 (42) 2.36 (60) GH304H A B Ø C Ø D E F G H J K L M N P Weight 2.25 (57.2) 2.25 (57.2) 2.81 (71.4) 1.63 (41.4) 1.63 (41.4) 2 (50.8) 0.50 (12.6) 0.63 (15.9) 0.76 (19.2) 0.26 (6.7) 0.33 (8.3) 0.33 (8.3) 2.94 (75) 3.56 (25.4) (91) 3.77 (95.8) 1.25 (31.8) 4.83 (123) 5.25 (133) 1.75 (44.4) 6.76 (172) 5/1618 1.19 (30.2) 3/816 1/213 F 1.57 (40) 1.94 (49.2) 0.19 (4.8) 0.20 (5) 0.25 (6.4) N J 1.38 (35) 1.63 (41.4) 2 (50.8) L P 0.81 (20.6) 1.25 (31.8) 2 (50.8) 2.06 (52.4) 2.31 (58.8) 2.88 (73.2) K M 2.10 (53.3) 3.06 (77.7) 4.76 (121) 4.94 (125.6) 6.23 (158.2) 9.38 (238) lb. (340 g) lb. (340 g) 1.28 lbs. (580 g) 1.28 lbs. (580 g) 3.26 lbs. (1,480 g) 3.26 lbs. (1,480 g)
PUSH/PULL TOGGLE CLAMPS 27 Heavy Duty s High strength steel construction, broached body and precise ground plunger. Hardened steel pins and bushings are used for pivot joints. Supplied with separate handle and base. Users can weld them at desired position. These clamps can be mounted using base (supplied) or by drilling a hole in fixture and welding in place. Clamp handle can be rotated to any position. 30509 & 30609 Compact design with maximum plunger travel. Plunger locks in extended position only. Ø H A E THD Ø F G L M GH30509 B C D J K GH30509 GH30609 Holding Capacity 2,500 lbs. (1,136 kg) 5,000 lbs. (2,273 kg) Supplied GHSA12300 GHSA58500 Plunger Stroke 1.81 (46) 2.34 (60) A B C D E Ø F G Ø H J K L M Weight 6 (152.4) 6 (152.4) 2.76 (70) 3.56 (90.5) 0.31 (8) 0.44 (11.2) 1.19 (30) 1.58 (40) 1/213 5/811 (25.4) (25.4) 1.5 (38.1) 0.85 (21.7) 1.07 (27.2) 2 (50.8) 2.69 (68.3) 5.91 (150) 7.80 (198) 1.37 (34.9) 1.75 (44.4) 2.91 (74) 3.43 (87) 2.93 lbs. (1,330 g) 6.22 lbs. (2,820 g) Ø H 30519 & 30619 Plunger locks at both ends of travel. A E THD GH30519 D B Ø F G C J K L M GH30519 GH30619 Holding Capacity 2,500 lbs. (1,136 kg) 5,000 lbs. (2,273 kg) Supplied GHSA12300 GHSA58500 Plunger Stroke 2.34 (60) 3.06 (78) A B C D E Ø F G Ø H J K L M Weight 6 (152.4) 6 (152.4) 2.76 (70) 3.56 (91) 0.31 (8) 0.44 (11.2) 1.19 (30) 1.58 (40) 1/213 5/811 (25.4) (25.4) 1.5 (38.1) 0.85 (21.7) 1.07 (27.2) 2 (50.8) 2.69 (68.3) 8.34 (212) 11.14 (283) 1.37 (34.9) 1.75 (44.4) 2.91 (74) 3.43 (87) 3.62 lbs. (1,640 g) 7.72 lbs. (3,500 g)
LATCH TYPE TOGGLE CLAMPS 28 Series 431 N Supplied with latch plate and standard Ubolt Optional Long UBolts available 2 x Ø Q 4 x Ø G M P K L 40323 A B D E GH431 GH40341 C F Description GH40323SS Stainless Steel of GH40323 Ø J R GH431SS Stainless Steel of GH431 GH40341SS Stainless Steel of GH40341 H Cross Ref. DESTACO GH40323 323 GH431 331 GH40341 341 Holding Capacity 360 lbs. (163 kg) 700 lbs. (318 kg) 2,000 lbs. (900 kg) A B C D E F Ø G H Ø J K L M N P Ø Q R Weight 0.24 (6) 0.27 (6.8) 0.37 (9.5) 0.39 (9.9) 0.45 (11.5) (19.1) 0.78 (19.8) (25.4) 1.50 (38.1) 0.20 (5.2) 0.25 (6.4) 0.37 (9.5) 0.63 (15.9) 1.63 (41.3) 1.03 (26.2) 1.56 (39.7) 2.37 (60.3) 0.17 (4.4) 0.26 (6.7) 0.34 (8.6) 0.08 (2) 0.12 (3) 0.16 (4) 0.16 (4) 0.20 (5) 0.31 (8) 1.05 (26.6) 1.75 (44.5) 1.11 (28.2) 1.75 (44.4) 2.13 (54) 0.94 (24) 1.50 (38) 2.05 (52) 2.17 (55) 3.44 (87.5) 4.50 (114.5) 1.25 (31.8) 1.50 (38.1) 0.17 (4.4) 0.25 (6.3) 0.33 (8.5) 1.23 (31.3) 1.67 (42.3) 3 (76.1) 0.16 lb. (70 g) 0.50 lb. (225 g) 1.5 lbs. (680 g) NEW 40323R NEW! SECURELOCK MODELS! This new model features a locking lever to securely lock the clamp in the closed position. Ideal for latching applications on molds, doors, lids, and access covers. 2 x Ø 0.18 (2 x Ø 4.5) 0.51 (13) 4 x Ø 0.18 (4 x Ø 4.5) 1.11 (28.2) Cross Ref.: DESTACO 323R Holding Capacity: 360 lbs. (163 kg) Weight: 0.22 lb. (100 g) 0.24 (6) 0.39 (9.9) 0.78 (19.8) 0.21 (5.35) 1.03 (26.2) 0.61 (15.5) 2.17 (55) 0.94 (24) Ø 0.16 (Ø 4) 1.31 (33.3) GH40323R
LATCH TYPE TOGGLE CLAMPS 29 NEW 431R & 40341R 2 x Ø Q 4 x Ø G N M NEW! SECURELOCK MODELS! This new model features a locking lever to securely lock the clamp in the closed position. Ideal for latching applications on molds, doors, lids, and access covers. K A D P L B E C F GH431R Ø J R GH40341R H Cross Ref. DESTACO GH431R 331R GH40341R 341R Holding Capacity 700 lbs. (318 kg) 2,000 lbs. (900 kg) A B C D E F Ø G H Ø J K L M N P Ø Q R Weight 0.27 (6.8) 0.37 (9.5) 0.45 (11.5) (19.1) (25.4) 1.50 (38.1) 0.25 (6.4) 0.37 (9.5) 1.63 (41.3) 1.76 (44.7) 3.35 (85.3) 0.26 (6.7) 0.34 (8.6) 0.24 (6) 0.16 (4) 0.20 (5) 0.31 (8) 1.05 (26.6) 1.75 (44.5) 1.75 (44.4) 2.13 (54) 1.50 (38) 2.05 (52) 3.44 (87.5) 4.51 (114.5) 1.25 (31.8) 1.50 (38.1) 0.25 (6.3) 0.33 (8.5) 1.81 (46) 3 (76.1) 0.59 lb. (270 g) 1.48 lbs. (670 g) UNIQUE Optional Long UBolts When you need a longer reach, you need the LUB s; LongReach UBolts for use with latches. Ø D L L1 W GH40323LUB GH40323LUBSS GH431LUB GH431LUBSS GH40341LUB GH40341LUBSS Use with No. L L1 W Ø D GH40323, GH40323R 2.75 (70) 1.25 (31.8) 0.16 (4.1) Stainless Steel of GH40323LUB GH431, GH431R 4.5 (114) 2 (50.4) 1.25 (31.8) 0.2 (5.1) Stainless Steel of GH431LUB GH40341, GH40341R 6.25 (159) 3.13 (79.5) 1.50 (38.1) 0.3 (7.6) Stainless Steel of GH40341LUB
LATCH TYPE TOGGLE CLAMPS 30 40370 Cross Ref.: DESTACO 375 Holding Capacity: 4,000 lbs. (1,818 kg) Weight: 2.78 lbs. (1.26 kg) 5.71 (145) 2.20 (56) Both the alloy steel base and the optional latch plate are forged for strength and durability. 3.13 (79) 2.25 (57.2) 1.37 (35) 1.63 (41) Ø 0.41 (Ø 10.3) Ø 0.63 (Ø 16) 9.69 (246) 3.50 (89) GH40370LP GH40370LP (Sold Separately) GH40370 1.13 (29) Ø 0.37 (Ø 9.5) 4 (102) 1.37 (34.9) 2.25 (57) 2.25 (57.2) 3.37 (86) NEW 40370R NEW! SECURELOCK MODELS! This new model features a locking lever to securely lock the clamp in the closed position. Ideal for latching applications on molds, doors, lids, and access covers. 5.71 (145) 2.20 (56) Cross Ref.: DESTACO 375R Holding Capacity: 4,000 lbs. (1,818 kg) Weight: 3.1 lbs. (1.41 kg) 3.13 (79) 2.25 (57.2) 1.37 (35) 1.63 (41.4) Ø 0.41 (Ø 10.3) Ø 0.63 (Ø 16) 10.31 (261.85) Ø 0.37 (Ø 9.5) 4 (102) GH40370LP (Sold Separately) GH40370R 1.13 (29) 1.37 (34.9) 2.25 (57) 2.25 (57.2) 3.37 (86) 0.38 (9.6)
LATCH TYPE TOGGLE CLAMPS 31 40380 Cross Ref.: DESTACO 385 Holding Capacity: 7,500 lbs. (3,400 kg) Weight: 3.25 lbs. (1.48 kg) This extra heavy duty model and optional latch plate has all forged part construction. 5.76 (146.3) 2.76 (70) 3.13 (79.4) 2.25 (57.2) 0.50 (12.7) 2.13 (54) Ø 0.43 (Ø 10.3) Ø 0.63 (Ø 16) 8.63 (219.1) GH40370LP GH40370LP (Sold Separately) GH40380 1.13 (28.6) 2.19 (56) 1.13 (28.6) Ø 0.50 (Ø 12.7) 3.69 (93.8) 1.37 (34.9) 2.25 (57.2) 2.25 (57.2) 3.38 (85.8) 0.38 (9.6) 40370LP Latch Plate for s 40370 and 40380 Cross Ref.: DESTACO 375509 / 385102 Weight: 0.9 lbs. (0.4 kg) Ø 0.63 (Ø 16) Ø 0.41 (Ø 10.3) 3.13 (79.4) 2.25 (57.2) 1.13 (28.6) GH40370LP 1.37 (34.9) 2.25 (57.2)
LATCH TYPE TOGGLE CLAMPS 32 Series 40840 M The unique latch offers dual mounting options: horizontal and vertical. Two pivot hole patterns are provided to accommodate two mounting positions. Supplied latch plate offers low profile clamping for side mounting applications. Ø J P R L F N Q C D E GH40870 GH40840 GH40820 mounted on a vertical position. H G Ø K A B GH40820 GH40840 GH40870 Holding Capacity 440 lbs. (200 kg) 550 lbs. (250 kg) 1,540 lbs. (700 kg) A B C D E F G H Ø J Ø K L M N P Q R Weight 0.51 (13) 1.26 (32) 1.02 (26) 1.38 (35) 2 (50.5) 0.98 (25) 1.42 (36) 0.95 (24) 1.26 (32) 1.77 (45) 1.42 (36) 1.89 (48) 2.50 (63.5) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 0.43 (11) 0.55 (14) 0.81 (20.6) 1.06 (27) 0.16 (4) 0.24 (6) 0.31 (8) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 1.81 (46) 2.87 (73) 3.46 (88) 2.56 (65) 3.82 (97) 4.61 (117) 0.83 (21) 1.12 (28.5) 1.75 (44.5) 3.54 (90) 4.47 (113.5) 5.91 (150) 0.20 (5.2) 0.26 (6.5) 0.33 (8.5) 2.17 (55) 2.76 (70) 3.35 (85) 0.24 lb. (110 g) 0.67 lb. (306 g) 1.54 lbs. (700 g) Series 40324 Supplied with latch plate These unique latch clamps are designed for enclosure applications where the clamps are perpendicular to the latches. R T D C S K P 40334, 344 Ø J L M Ø F GH40324 A B G 2 x Ø E Q H N Cross Ref. DESTACO GH40324 324 GH40334 334 GH40344 344 Holding Capacity 500 lbs. (225 kg) 1,000 lbs. (450 kg) 2,000 lbs. (900 kg) A B C D Ø E Ø F G H Ø J K L M N P Q R S T Weight 0.56 (14.3) 0.81 (20.6) 1.06 (27) (25.4) 1.50 (38.1) 2.13 (54) 2.09 (53.3) 2.57 (65.4) 3.31 (84.1) 3.11 (79) 4.79 (122) 5.13 (130) 0.17 (4.4) 0.22 (5.6) 0.34 (8.7) 0.21 (5.3) 0.28 (7.1) 0.34 (8.7) 0.44 (11.1) 0.39 (17.5) 1.13 (28.6) 0.16 (4) 0.28 (7.1) 0.37 (9.5) 0.16 (4) 0.24 (6) 0.31 (7.9) 0.08 (2) 0.12 (3) 0.16 (4) 0.51 (13) (19.1) 1.25 (31.8) 1.02 (26) 1.31 (33.3) 1.87 (47.6) 0.19 (4.7) 0.34 (8.7) 0.50 (12.7) 2.76 (70) 4.21 (107) 5.91 (150) 0.87 (22) 1.10 (28) 1.44 (36.5) 1.04 (26.5) 1.59 (40.5) 2.28 (58) 3.09 (78.5) 4.37 (111) 6.06 (154) 1.22 (31) 1.63 (41.3) 0.25 lb. (113 g) 0.56 lb. (250 g) 2.37 1.54 lbs. (60.3) (700 g)
LATCH TYPE TOGGLE CLAMPS 33 NEW 40324R, 40334R & 40344R NEW! SECURELOCK MODELS! This new model features a locking lever to securely lock the clamp in the closed position. Ideal for latching applications on molds, doors, lids, and access covers. T D R C S K P 40324R Ø J L M 4 x Ø F GH40334R GH40344R 2 x Ø E Q A H B G N Cross Ref. DESTACO Holding Capacity A B C D Ø E Ø F G H Ø J K L M N P Q R S T Weight GH40324R 324R 500 lbs. (225 kg) 0.56 (14.3) (25.4) 2.23 (56.7) 3.11 (79) 0.17 (4.4) 0.21 (5.3) 0.44 (11.1) 0.16 (4) 0.16 (4) 0.08 (2) 0.51 (13) 1.02 (26) 0.19 (4.7) 2.76 (70) 0.87 (22) 1.04 (26.5) 3.09 (78.5) 1.22 (31) 0.26 lb. (120 g) GH40334R 334R 1,000 lbs. (450 kg) 0.81 (20.6) 1.50 (38.1) 2.57 (65.4) 4.79 (122) 0.22 (5.6) 0.28 (7.1) 0.39 (17.5) 0.28 (7.1) 0.24 (6) 0.12 (3) (19.1) 1.31 (33.3) 0.34 (8.7) 4.21 (107) 1.10 (28) 1.59 (40.5) 4.37 (111) 1.63 (41.3) 0.7 lb. (320 g) GH40344R 344R 2,000 lbs. (900 kg) 1.06 (27) 2.13 (54) 3.31 (84.1) 5.13 (130) 0.34 (8.7) 0.34 (8.7) 1.13 (28.6) 0.37 (9.5) 0.31 (7.9) 0.16 (4) 1.25 (31.8) 1.87 (47.6) 0.50 (12.7) 5.91 (150) 1.44 (36.5) 2.28 (58) 6.06 (154) 2.37 1.76 lbs. (60.3) (800 g)
LATCH TYPE TOGGLE CLAMPS 34 Series 451 These are the most popular latch clamps with adjustable single hook design. GH451 has a flanged base, while GH452 has a narrow base which is less tolerant to twisting motions. Stainless steel models are available. Optional Latch Plates are also available. 1.50 (38.1) 2 (50.8) GH452 Base Ø 0.26 (Ø 6.7) H K Ø J 4 x Ø A G GH452 F B C D E GH452LP (Sold Separately) Cross Ref.: DESTACO Description Holding Capacity GH451 351 Flanged Base 375 lbs. (170 kg) Ø A B C D E F G H Ø J K Weight 0.22 (5.6) 0.50 (12.7) 1.50 (38.1) 8.35 (212) 2.30 (58.3) 1.44 (36.5) 1.94 (49.2) 0.31 (8) 1.37 (34.9) 0.59 lb. (270 g) Optional Latch Plate GH451LP GH451SS 351SS Stainless Steel of GH451 GH451LPSS GH452 351B Narrow Base 375 lbs. (170 kg) 0.26 (6.7) 1.50 (38.1) 2 (50.8) 8.31 (211) 1.76 (44.8) 1.44 (36.5) 0.31 (8) 0.56 lb. (255 g) GH452LP GH452SS 351BSS Stainless Steel of GH452 GH452LPSS GH40371 371 Flanged Base GH43810 381 Flanged Base 750 lbs. (340 kg) 1,000 lbs. (450 kg) 0.34 (8.7) 0.41 (10.3) 0.31 (7.9) 0.50 (12.7) 1.25 (31.8) 1.13 (28.6) 1.87 (47.6) 2.13 (54) 11.22 (285) 13.23 (336) 3.13 (79.4) 3 (76.2) 2.25 (57.3) 2.68 (68) 2.59 (65.7) 3.37 (85.7) 0.37 (9.5) 0.50 (12.7) 1.94 (49.2) 2.37 (60.3) 1.38 lbs. (624 g) 2.56 lbs. (1,130 g) GH40371LP GH43810LP 43101 Cross Ref.: DESTACO 301 Holding Capacity: 375 lbs. (170 kg) Weight: 0.68 lb. (310 g) Optional latch plate model GH43101LP 0.57 (14.4) 1.75 (44.4) 1.24 (31.6) GH43101 4 (101.6) 4 x Ø 0.28 (4 x Ø 7.1) 0.50 (12.7) 1.63 (41) 0.40 (10) 1.89 (48) GH43101LP (Sold Separately) 0.13 (3.2) 1.37 (34.8) 8.17 (207.6)
LATCH TYPE TOGGLE CLAMPS 35 43110 & 43120 Holding Capacity: 375 lbs. (170 kg) Weight: 0.40 lb. (180 g) GH43110 supplied with M6 hook bolt GH43120 supplied with hex head spindle assembly. 1.10 (28) 0.71 (18) M6 GH43120 GH43110 GH43110 0.87 (22) 0.10 (2.5) 0.47 (12) 0.83 (21) 0.79 (20) 2 x Ø 0.26 (2 x Ø 6.5) 1.38 (35) 3 (76.5) GH43120 43150 & 43160 Holding Capacity: 660 lbs. (300 kg) Weight: 0.85 lb. (385 g) GH43150 supplied with M10 hook bolt GH43160 supplied with hex head spindle assembly. 1.42 (36) 0.94 (24) 2 x Ø 0.33 (2 x Ø 8.5) M10 THD GH43160 GH43150 GH43150 0.91 (23) 0.13 (3.2) GH43160 0.47 (12) 0.94 (24) 1.57 (40) 4.53 (115)
TOGGLE PLIERS All Pliers are forged from alloy steel with stainless steel rivets for durability. 36 50350 Cross Ref.: DESTACO 424 Holding Capacity: 200 lbs. (90 kg) Weight: 0.41 lb. (185 g) Supplied: GHSA14112 Ø 0.50 (Ø 12.7) 0.31 (8) 5.13 (130) 0.15 0.25 (4) (6.4) 1.87 (47) (25.4) 1.90 (48) 1.13 (29) 50360 Ø 0.50 (Ø 13) 0.31 (8) 0.15 (4) 0.25 (6.4) Cross Ref.: DESTACO 441 Holding Capacity: 350 lbs. (159 kg) Weight: 0.64 lb. (290 g) Supplied: GHSA56200 0.37 (10) 6.50 (165) 2.12 1.25 (54) (32) 2.37 (60) 1.75 (44.5) 50380 Ø 0.69 (Ø 18) 0.43 (11) 0.50 (13) 0.37 (10) 0.19 (5) Cross Ref.: DESTACO 462 Holding Capacity: 700 lbs. (318 kg) Weight: 1.46 lbs. (660 g) Supplied: GHSF38300 2.75 (70) 8.50 (216) 3 (76) 1.75 (44) 2.69 (68) 50385 Holding Capacity: 1,800 lbs. (820 kg) Weight: 1.56 lbs. (710 g) Supplied: GHSA38114 3/824 THD 1.25 (32) 0.63 (16) 7.37 (187) 3 (77) 1.77 (45) 2 (51)
TOGGLE PLIERS 37 61352 Holding Capacity: 200 lbs. (90 kg) Weight: 0.3 lb. (130 g) Supplied: GHSA14112 Ø 0.50 (Ø 13) 1.18 (30) 4.75 (121) 1.78 (45) 0.97 (25) 1.63 (41) 50450 Cross Ref.: DESTACO 463 Holding Capacity: 700 lbs. (318 kg) Weight: 1.63 lbs. (740 g) Supplied: GHSF38300 swivel foot and GHSA38300 hex head spindle assembly 0.69 (18) 0.43 (11) 2.75 (70) 0.50 (13) 8.50 (216) 0.19 (5) 0.37 (10) 4.25 (108) 3 (76) 2.69 (68)
CAM TYPE TOGGLE CLAMPS 38 60130 & 60131 Designed to hold workpiece with inconsistent height. Cam Action permits hold down material deviation of 0.125 (3.2 mm) in height. Ideal for castings and forgings, etc. A B 4 x Ø L C GH60130 M J K G D H E F Holding Capacity Supplied Bar Opens Handle Opens A B C D E F G H J K Ø L M Weight GH60130 550 lbs. (250 kg) GHSF38300 70º 165º 8.66 (220) 1.54 (39) 0.25 (6.5) 0.87 (22) 1.38 (35) 2.28 (58) 4.65 (118) 1.89 (48) 2.44 (62) 0.31 (8) 0.79 (20) 1.50 lbs. (680 g) GH60131 770 lbs. (350 kg) GHSF12400 85º 170º 10.83 (275) 0.87 (22) 2.36 (60) 0.35 (9) 1.18 (30) 1.89 (48) 3.94 (100) 7 (178) 2.24 (57) 3.03 (77) 0.35 (9) 0.98 (25) 3.51 lbs. (1,590 g)
HEAVY DUTY WELDABLE TOGGLE CLAMPS 39 These heavyduty clamps provide the strong, durable holding power to meet the requirements of the auto industry. These clamps are forged from alloy steel, hardened, and ground to close tolerance. Pins are also hardened and grounded. A separate handle is included with each clamp for welding in the desired position. Series 701 & 702 A A B B H G H G GH701C GH701D GH701K GH702C GH702D GH702K GH701C GH701D GH701K Holding Capacity 440 lbs. (200 kg) 1,100 lbs. (500 kg) 2,200 lbs. (1,000 kg) 440 lbs. (200 kg) 1,100 lbs. (500 kg) 2,200 lbs. (1,000 kg) J M Arm Opens E F C Handle Opens 194º 123º 191º 122º 197º 128º 194º 123º 191º 122º 197º 128º L D K Ø A B C D E F G H J K Ø L M Weight 0.68 (17.3) 0.85 (21.7) 1.07 (27.2) 0.68 (17.3) 0.85 (21.7) 1.07 (27.2) 6 (152.4) 1.96 (50) 2.69 (66.8) 3.15 (80) 0.94 (23.8) 1.33 (33.7) 1.46 (37.2) 0.57 (14.5) 4 (102) 4.84 (123) 1.89 (48) 2.72 (69) 3.30 (84) 0.31 (8) 0.51 (13) 0.63 (16) 0.31 (8) 0.51 (13) 0.63 (16) GH702C GH702D GH702K 1.25 (31.8) 1.65 (42) 1.81 (46) 1.25 (31.8) 1.65 (42) 1.81 (46) 1.57 (40) 1.92 (48.8) 2.09 (53) 1.57 (40) 1.92 (48.8) 2.09 (53) J M 0.67 (17) 0.97 (24.6) 0.98 (25) 0.67 (17) 0.97 (24.6) 0.98 (25) E F C 4.75 (121) 6.50 (165) 8.07 (205) 3.66 (93) 5.20 (132) 6.57 (167) L D 1.75 (44.5) 1.97 (50) 2.48 (63) 1.02 (26) 1.43 (36.4) 2.13 (54) K 1.10 (28) 1.54 (39) 2.05 (52) 1.10 (28) 1.54 (39) 2.05 (52) 2 (50.8) 1.32 lbs. (598 g) 2.75 3.50 lbs. (70) (1,587 g) 3.54 5.84 lbs. (90) (2,650 g) 2 1.50 lbs. (50.8) (680 g) 2.75 3.24 lbs. (70) (1,469 g) 3.54 5.75 lbs. (90) (2,608 g) Series 70305 Cross Ref.: DESTACO GH70305 503M GH70310 503MB GH70315 503MLB GH70505 505M GH70510 505MB GH70515 505MLB GH70605 506M GH70610 506MB GH70615 506MLB Holding Capacity 1,100 lbs. (500 kg) 2,200 lbs. (1,000 kg) 4,400 lbs. (2,000 kg) Arm Opens Handle Opens 214º 134º 206º 130º 206º 130º GH70305 GH70505 GH70605 GH70310 GH70510 GH70610 A GH70315 GH70515 GH70615 Ø A B C D D1 E F G H K K1 L Weight GH70305 GH70310 GH70315 GH70505 GH70510 GH70515 GH70605 GH70610 GH70615 0.69 (17.5) 0.87 (22.2) 1.06 (27) 4.9 (125) 0.19 (4.8) 0.19 (4.8) 0.25 (6.3) 0.79 (20) 1.97 (50) 1.10 (28) 2.50 (63.5) 1.30 (33) 3 (76) 1.97 (50) 2.50 (63.5) 3 (76) 0.39 (10) 0.48 (12.3) 0.63 (16) 1.25 (31.8) 1.59 (40.3) 1.91 (48.6) 1.57 (40) 2.24 (57) 2.93 (74.3) 0.59 (15) 1.02 (26) 1.30 (33) 1.14 (29) 1.50 (38) 2 (51) 1.77 (45) 2 (51) 2.50 (63.5) 1.68 lbs. (760 g) 2 1.87 lbs. (51) (850 g) 2.07 lbs. (940 g) 2.93 lbs. (1,330 g) 2.87 3.28 lbs. (73) (1,490 g) 3.51 lbs. (1,590 g) 5.62 lbs. (2,550 g) 3.58 6.24 lbs. (91) (2,830 g) 6.50 lbs. (2,950 g) E F B L D D1 C H G K K1
HEAVY DUTY WELDABLE TOGGLE CLAMPS 40 75027 & 75027SM 4.37 (111) 8.46 (215) Cross Ref.: DESTACO 527 & 527F Holding Capacity: 1,000 lbs. (450 kg) Weight: 2.51 lbs. (1,140 g) Bar Opens: 195º Handle Moves: 65º 1.50 (38) 1.26 2.24 (32) (57) 2.09 (53) GH75027 Ø 0.41 (Ø 10.3) Ø 0.69 (Ø 17.5) 6.61 (168) 8.46 (215) 1.26 2.24 (32) (57) Ø 0.69 (Ø 17.5) GH75027SM 1.50 (38) 4.06 (103) Ø 0.41 (Ø 10.3) 75048 & 75078 Cross Ref.: DESTACO 548 & 578 G F E GH75048 Holding Capacity Arm Opens Handle Opens A B C D E F G Weight D GH75048 1,500 lbs. (700 kg) 200º 110º 3.25 (82.6) 2.65 (67.2) 4.26 (108) (25.4) 9.92 (252) 2.20 (56) 5.95 lbs. (2,700 g) B GH75078 3,500 lbs. (1,600 kg) 200º 110º 4 (101.6) 2.72 (69.2) 4.63 (117.5) 1.26 (32) 10.87 (276) 2.57 (65.2) 0.87 9.26 lbs. (22.2) (4,200 g) C A
FTYPE CLAMPS 41 80325 & 80325SS Cross Ref.: DESTACO 325 & 325SS Holding Capacity: 750 lbs. (340 kg) Weight: 1.10 lbs. (500 g) Handle Opens: 50º Jaw Opens: 90º Supplied Stainless Steel GH80325SS available 1.78 (45) 0.29 (7.5) 0.30 0.49 (7.7) (12.5) 0.59 (31.8) 90º The bottom jaw is designed to be welded to container or cover. The forged jaw swings 90º for easy job loading. 1/213 Hex spindle supplied. 0.25 (6.4) 2 x Ø 0.26 (2 x Ø 6.7) 8.27 (210) 0.32 (8) 0.50 (13) 50º GH80325 0.31 (8)
PNEUMATIC POWER CLAMPS 42 These fast acting air clamps use standard toggle clamps as the basic platform. 1/8 NPT port is standard. Maximum air pressure allowed in the cylinder is 140 PSI. GH10101A GH12050A GH12130A & GH12132A Specifications GH12265A & GH12275A GH10247A & GH10249A GH20820A Basic Holding Capacity Supplied Bar Opens Cylinder Bore Cylinder Stroke GH10101A GH101A 150 lbs. (68 kg) GHFC10138 82º 0.78 (20) 1.24 in² (31.4 mm²) GH12050A GH12050 200 lbs. (90 kg) GHFC14134 95º 1.18 (30) 2.78 in² (70.7 mm²) GH12130A GH12130 350 lbs. (160 kg) GHFC56212 92º 1.18 (30) 2.78 in² (70.7 mm²) GH12132A GH12132 350 lbs. (160 kg) GHFC56212 92º 1.18 (30) 2.78 in² (70.7 mm²) GH12265A GH12265 600 lbs. (272 kg) GHFC38312 95º 1.57 (40) 4.94 in² (125.6 mm²) GH12275A GH12275 600 lbs. (272 kg) GHFC38312 95º 1.57 (40) 4.94 in² (125.6 mm²) GH10247A GH10247 800 lbs. (364 kg) GHFC12300 95º 2 (50) 7.73 in² (196.3 mm²) GH10249A GH10249 800 lbs. (364 kg) GHFC12300 95º 2 (50) 7.73 in² (196.3 mm²) GH20820A GH20820 350 lbs. (160 kg) GHFC56212 90º 1.18 (30) 2.78 in² (31.4 mm²) Dimensions A B C Ø D E F G H GH10101A 0.94 (23.8) 0.20 (4.8) 0.63 (15.9) 0.13 (4.4) 1.60 (40.7) 0.69 (17.5) 0.94 (24) 6.63 (168.5) A GH12050A 1.06 (27) 0.25 (6.3) 0.50 (12.7) 0.20 (5.2) 2.19 (55.7) 1.06 (27) 1.38 (35) 7.28 (185) GH12130A 1.26 (32) 0.39 (10) 0.28 (7.1) 2.97 (75.4) 1.33 (33.8) 2.68 (68) 9.31 (236.5) B C GH12132A 1.26 (32) 0.39 (10) 0.28 (7.1) 2.97 (75.4) 1.35 (34.2) 3.47 (88.2) 10.24 (260) 4Ø D GH12265A 1.78 (45.2) 0.37 (9.5) 1.25 (31.8) 0.33 (8.3) 3.69 (93.7) 1.75 (44.2) 3.47 (88.2) 15.43 (392) GH12275A GH10247A GH10249A 1.78 (45.2) 1.78 (45.2) 1.78 (45.2) 0.37 (9.5) 0.74 0.74 1.25 (31.8) 1.25 (31.8) 1.25 (31.8) 0.33 (8.3) 0.33 (8.3) 0.33 (8.3) 3.69 (93.7) 4.33 (110) 4.33 (110) 1.75 (44.2) 2.18 (55.3) 2.18 (55.3) 3.47 (88.2) 4.52 (114.8) 4.52 (114.8) 11.89 (302) 16.02 (407) 16.02 (407) E F GH20820A 0.98 (25) 0.65 (17) 0.63 (16) 0.28 (7) 7.68 (195) 2.75 (70) 2.36 (60) 6.50 (165) G H
PNEUMATIC CLAMPS / YOKE ASSEMBLIES 43 GH36301A GH36003A GH36330A Specifications Dimensions GH36301A GH36003A Basic GH301A GH36003 GH36330A GH36330 Holding Capacity 100 lbs. (454 kg) 600 lbs. (273 kg) 2,500 lbs. (1,136 kg) Supplied GHSA08034 GHSA56200 GHSA38300 Cylinder Bore (20) 1.18 (30) 1.57 (40) Cylinder Stroke 1.24 in² (3.14 cm²) 2.78 in² (7.07 cm²) 4.94 in² (12.56 cm²) A B Ø C D E F G H J K GH36301A 0.63 (15.9) GH36003A 1.31 (33.3) GH36330A 1.63 (41.3) 0.25 (6.4) 0.44 (11.1) 0.63 (15.9) 0.17 (4.4) 0.22 (5.6) 0.34 (8.7) 1.27 (32.2) 2.28 (58) 2.03 (51.5) 1.57 (40) 2.74 (69.5) 3.30 (84) 0.63 (15.9) 1.44 (36.5) 1.37 (34.9) 1.63 (41.3) 0.47 (12) 0.78 (19.7) 0.54 (13.6) 1.09 (27.7) 7.36 (187) 9.84 (250) 1.18 1.05 (30) (26.6) 13.66 (347) Ø C A B H E J D F G K Yoke Assemblies Hold two workpieces, or long pieces of fabric or metal. The yokes have spring loaded, extrawide spindles that provide strong, nomar holding power that can be adjusted to accommodate varying material thicknesses and sizes. GHYP3145 Yoke attached to GH304E Clamp (Sold separately) GHYP3130 Yoke attached to GH20235 Clamp (Sold separately) GHYP3160 Yoke attached to GH12265 Clamp (Sold separately) A x 3/4 L Plastic Pad Part No. A L L GHYP3130 5/1618 3 (76.2) GHYP3145 5/1618 4.5 (114.3) 10º GHYP3160 5/1618 6 (152.4) GHYP3730 3/816 3 (76.2) 3.9 (99) GHYP3745 3/816 4.5 (114.3) 5/1618 TYP GHYP3760 3/816 6 (152.4) 1.63 (41) Plastic Pad (Full Thread)
ACCESSORIES 44 Adjustable Assemblies Flat Cushion Tip Bonded Neoprene Cap Zincplated finish A Swivel Foot Adjustable Assemblies A Copperplated finish OAL OAL Part No. Thread OAL A GHFC10138 1024 17/16 7/16 GHFC14134 1/420 17/8 1/2 GHFC14218 1/420 21/8 1/2 GHFC56212 5/1618 21/2 3/4 GHFC56300 5/1618 3 3/4 GHFC38312 3/816 31/2 1 GHFC38412 3/816 41/2 1 GHFC12334 1/213 33/4 1 Part No. Thread OAL A GHSF14214 1/420 21/4 3/8 GHSF56234 5/1618 23/4 3/8 GHSF38200 3/816 2 3/8 GHSF38300 3/816 3 7/16 GHSF12300 1/213 3 7/16 GHSF12400 1/213 4 1/2 Flanged Washers for UBar Clamps Zincplated finish Standard Adjustable Zincplated finish L Part No. Thread L GHSA08034 832 3/4 GHSA10118 1024 11/8 GHSA14112 1/420 11/2 GHSA14134 1/420 13/4 GHSA56200 5/1618 2 GHSA56212 5/1618 21/2 GHSA38300 3/816 3 GHSA38400 3/816 4 GHSA12300 1/213 3 GHSA12412 1/213 41/2 GHSA58500 5/811 5 Cone Cushion Tip Bonded Neoprene Cap Zincplated finish A Part No. GHFW080 GHFW100 GHFW140 GHFW516 GHFW380 GHFW120 GHFW580 Part No. GHNC140 GHNC516 GHNC380 GHNC120 Description For 8 spindle For 10 spindle For 1/4 spindle For 5/16 spindle For 3/8 spindle For 1/2 spindle For 5/8 spindle Neoprene Caps Slips on standard adjustable spindle heads. Description For 1/4 spindle For 5/16 spindle For 3/8 spindle For 1/2 spindle Bolt Retainers Zincplated finish OAL Part No. Thread OAL A GHCC10138 1024 13/8 1/2 GHCC14134 1/420 13/4 3/4 GHCC14218 1/420 21/8 3/4 GHCC56212 5/1618 21/2 13/16 GHCC38312 3/816 31/2 1 Part No. GHBR140 GHBR516 GHBR380 GHBR120 GHBR580 Description For 1/4 spindle For 5/16 spindle For 3/8 spindle For 1/2 spindle For 5/8 spindle
APPENDIX 45 PART NO. PAGE PART NO. PAGE PART NO. PAGE PART NO. PAGE 101A 1 101AI 1 101AIT 1 101ASS 1 101AT 1 101B 4 101J 9 101JS 9 102B 4 106B 5 200W 19 200WH 19 200WL 19 200WLH 19 201A 10 201AI 10 201AL 10 201AR 10 201ASS 10 201B 13 201BHB 13 201BI 13 201BS 13 201BSI 13 201BSM 13 201BSS 13 201I 10 201L 10 201R 10 201SS 10 201 10 202F 14 202FL 14 203F 14 203FL 14 204G 20 204GB 20 204GBL 20 204GBLH 20 204GL 20 220WH 19 220WLH 19 225D 15 225DHB 15 225DI 15 225DSM 15 225DSS 15 301A 21 301B 21 302D 22 302F 22 302FSS 22 303EK 25 304C 26 304E 26 304H 26 305C 26 305E 26 305H 26 431LUB 29 431LUBSS 29 431R 29 431SS 28 431 28 451LP 34 451LPSS 34 451SS 34 451 34 452LP 34 452LPSS 34 452SS 34 452 34 701C 39 701D 39 701K 39 702C 39 702D 39 702K 39 10101A 42 10247A 42 10247 8 10248 8 10249A 42 10249 8 10444 8 10448 8 11002B 1 12002B 1 12130SM 6 12050A 42 12050HB 3 12050SM 3 12050SS 3 12050U 3 12050UL 3 12050 3 10250 8 12055 3 12060 3 12065 3 12070 3 12075 3 12080 3 12085 3 12130A 42 12130HB 6 12130SS 6 12130 6 12131 6 12132A 42 12132 6 12133 6 12135 6 12136 6 12137 6 12138 6 12140 6 12141 6 12142 6 12143 6 12145 6 12146 6 12147 6 12148 6 12205 5 12265A 42 12265SS 7 12265 7 12270 7 12275A 42 12275 7 12280 7 12285 7 12290 7 12295 7 12300 7 12305 7 12310 7 12315 7 12320 7 13002B 1 13005HB 2 13005SM 2 13005SS 2 13005 2 13007SM 2 13007 2 13008 2 20235SS 18 20235 18 20236 18 20300 11 20752B 12 20800SS 11 20800 11 20820A 42 20820 14 21383 16 21502B 12 22005 10 22010 10 22025 10 22030 10 22100 12 22105 12 22165 16 22170 16 22175 16 22180 16 22185 16 22190 16 22195 16 22200 16 22235 17 22502B 12 25382 18 25383 17 30250 25 30282 22 30290 23 30292 23 30450 25 30509 27 30519 27 30607 24 30609 27 30619 27 36003A 43 36003 23 36006 21 36010 24 36012 24 36020 23 36060 24 36070 21 36092 22 36202 26 36204SS 26 36204 26 36205 26 36224 26 36225 26 36301A 43 36330A 43 36330 25 40323LUB 29 40323LUBSS 29 40323R 28 40323SS 28 40323 28 40324R 33 40324 32 40334R 33 40334 32 40341LUB 29 40341LUBSS 29 40341R 29 40341SS 28 40341 28 40344R 33 40344 32 40370LP 31 40370R 30 40370 30 40371LP 34 40371 34 40380 31 40820 32 40840 32 40870 32 43101LP 34 43101 34 43110 35 43120 35 43150 35 43160 35 43810LP 34 43810 34 50350 36 50360 36 50380 36 50385 36 50450 37 60130 38 60131 38 61352 37 70305 39 70310 39 70315 39 70505 39 70510 39 70515 39 70605 39 70610 39 70615 39 75027SM 40 75027 40 75048 40 75078 40 80325SS 41 80325 41 BR120 44 BR140 44 BR380 44 BR516 44 BR580 44 CC10138 44 CC14134 44 CC14218 44 CC38312 44 CC56212 44 FC10138 44 FC12334 44 FC14134 44 FC14218 44 FC38312 44 FC38412 44 FC56212 44 FC56300 44 FW080 44 FW100 44 FW120 44 FW140 44 FW380 44 FW516 44 FW580 44 NC120 44 NC140 44 NC380 44 NC516 44 SA08034 44 SA10118 44 SA12300 44 SA12412 44 SA14112 44 SA14134 44 SA38300 44 SA38400 44 SA56200 44 SA56212 44 SA58500 44 SF12300 44 SF12400 44 SF14214 44 SF38200 44 SF38300 44 SF56234 44 YP3130 43 YP3145 43 YP3160 43 YP3730 43 YP3745 43 YP3760 43
STRONG HAND TOOLS PRODUCT LINES 46 Strong Hand Tools Quick Acting Welding Clamps, Magnets, Pliers, and Vises allow you to create accurate fitups quickly, safely and efficiently. BuildPro Welding Tables Affordable, Modular Welding Tables with the plate + hole + slot system for complete flexibility in fixturing. Siegmund Welding Tables German made Welding Tables for heavy duty fixturing applications. (North America & Asia) Valtra Machine Parts Handwheels, handles, clamps, levers, and threaded fasteners for manufacturing, and MRO. Stock or custom. See many more problem solving tools @ StrongHandTools.com