ALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596

Similar documents
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK

SCOPE OF ACCREDITATION

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Annex no. 1 of Accreditation Certificate no. LI 333 from

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

10.6 Scope of Accreditation

Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer

Paragon Scientific Ltd Proficiency Testing Scheme Schedule

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

10.6 Schedule of Accreditation

10.6 Scope of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock

ISO Petroleum products Fuels (class F) Specifications of marine fuels

ANNEX 2, REFERENCE FUELS

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST

ANNEX 3 REFERENCE FUELS. Parameter Unit Limits (1) Test method Minimum Maximum Research octane number, RON

Crude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist

SOUTH AFRICAN NATIONAL STANDARD

ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa

GB Translated English of Chinese Standard: GB NATIONAL STANDARD

International Quality Assurance Exchange Program Schedule. Fuel Month Number Type Dispatch Date Closing Date

GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE

Supply of Services for Detailed OEB Crude Assay Analysis

Specifications Of Straight Run Naphtha for Exportation

Fundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna

एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY

DRAFT EAST AFRICAN STANDARD

एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019

ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels

ASTM D2007M/ASTM D2549M In-house method/astm D6560/D3279

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION

Regional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu

EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 17

Certificate of Accreditation

National Oil Corporation Libyan Petroleum Institute. Crude oil assay Sarir crude oil

GB Translated English of Chinese Standard: GB NATIONAL STANDARD

National Oil Corporation Libyan Petroleum Institute. Crude Oil Assay Messla Crude Oil

360 INDEX. boiling point of gas oil components, 84 boiling range, 353 bunker fuels, 8 fuel No. 6 characteristics, 339 classification, 338

PRICE LIST 2017/2018

EDICT ± OF GOVERNMENT

एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 16

MUTINEER EXETER CRUDE OIL. Santos Limited

Coefficient of Friction of Lubricants D 5707 p. 69 Coking Value D 4715 p. 70 Cold Cranking Simulator Manual Method D 2602 p. 71 Automatic Method--see

ASTM Methods that are feasible with Metrohm instruments

Tung Xiao Dan Assistant Chemist Mark Tan Section Head Feedstock Evaluation Department

Exceeding Expectations

Index 1. ISO 8217 :

The Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826

FREQUENTLY ASKED QUESTIONS (FAQs)

Antek Gas Chromatography Products: A Guided Tour Through Industry

DETAIL SPECIFICATION FUEL, NAVAL DISTILLATE. This specification is approved for use by all Departments and Agencies of the Department of Defense.

DRAFT UGANDA STANDARD

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

COOPER BASIN CRUDE OIL. Santos Limited

Module8:Engine Fuels and Their Effects on Emissions Lecture 36:Hydrocarbon Fuels and Quality Requirements FUELS AND EFFECTS ON ENGINE EMISSIONS

FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES. ooooooooooooooooooooo

Sampling kits and test suites

Savant Labs Laboratory Testing Services. Tests by Method

Scope of testing. State: March Contents: siemens.com/energy

CONTENTS. Introduction 1 Explanation of Terms 2 Table I Test Method Equivalence 3 Table II Alphanumeric Index of Standards 6

Fuel Related Definitions

OIL PT. Scheme Description. Oils and Fuels Analysis Proficiency Testing Scheme

Corrosion in Underground Storage Tanks (USTs) Storing Diesel

ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels

Alcor Petrolab Company Test List March 14, 2018 Item Description Sample Volume-ML Sample Volume-G

Ceiba Crude (31.44 API, Sul WT%)

ITS Caleb Brett India:

Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1

Petroleum Refining Fourth Year Dr.Aysar T. Jarullah

OIL AND GAS STANDARDS CATALOGUE AS AT 31 DECEMBER 2017

Lecture 3: Petroleum Refining Overview

Biodiesel Fuel Quality

On-Line Process Analyzers: Potential Uses and Applications

PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS

Certificate of Accreditation

Article: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018

Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 1

Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria

ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels

Internal Combustion Engines

Table of Contents. Copyright and Trademarks 5. Copyright 5 Revision 5 Disclaimer of Liability 5 Copy and Use Restrictions 5.

Oil & Gas. From exploration to distribution. Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir. W3V19 - Refining Processes1 p.

SOUTH AFRICAN NATIONAL STANDARD

Corrosion in Underground Storage Tanks (USTs) Storing Diesel. Summary, Findings, and Impacts of EPA s July 2016 Research

On-Line NIR Analysis for Blending

SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009

Smoke Point Significance and Use

DoD Fuel Specification Review. Jill M Bramer, US ARMY Presenting on behalf of TRIPOL 11 April 2017

DETAIL SPECIFICATION TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5

Fuel oils Specification

Transcription:

Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide, elemental sulphur and peroxides - Doctor test IP 30 Electrical conductivity of aviation and distillate fuels IP 274 Corrosiveness to copper - Copper strip test IP 154 Hydrocarbon types in petroleum products - Fluorescent indicator adsorption IP 156 Thiol (mercaptan) sulphur in light and middle distillate fuels - Potentiometric IP 342 Sulphur in petroleum and petroleum products by energy dispersive x-ray fluorescence (EDXRF) spectrometry ASTM D4294 Filter blocking tendency IP 387 Distillation characteristics at atmospheric pressure IP 123 Transparent and opaque liquids - Kinematic viscosity and calculation of dynamic viscosity IP 71 Flash point - Abel closed-cup IP 170 Flash Point - Pensky Martens closed cup IP 34 Sulphur content of automotive fuels Ultraviolet fluorescence IP 490 Total sulphur in light hydrocarbons, spark ignition engine fuel, diesel engine fuel, and engine oil by ultraviolet (UV) fluorescence Free water and particulate contamination in distillate fuels and Haze rating - Visual inspection procedures ASTM D5453 ASTM D4176 Procedure 1 Water content of Petroleum Product - Dean & Stark distillation * IP 74 Freezing point of aviation fuels - Automatic laser IP 529 Saybolt colour of petroleum products - Saybolt chromometer Fatty acid methyl esters (FAME), derived from bio-diesel fuel, in aviation turbine fuel: GC- MS with selective ion monitoring/scan detection Water separation characteristics of aviation turbine fuels by portable separometer Naphthalene hydrocarbons in aviation turbine fuels by ultraviolet spectrophotometry Antioxidant (AO32) content of aviation turbine fuel by high performance liquid chromatography (HPLC) Static dissipater additives (SDA) in aviation turbine fuel by high performance liquid chromatography (HPLC) ASTM D156 IP 585 ASTM D3948 ASTM D1840 IP 343 IP 568 Water reaction of aviation fuels IP 289 Existent gum content of aviation turbine fuel - Jet evaporation IP 540

Smoke point of kerosene, manual and automated IP 598 Acid number of aviation turbine fuels - Colour indicator titration IP 354 Particulate contaminant in aviation turbine fuels by laboratory filtration IP 423 Thermal oxidation stability of gas turbine fuels (JFTOT) IP 323 Level of cleanliness of aviation turbine fuel - Portable automatic particle counter IP 565 Estimation of net heat of combustion of aviation fuels - Calculation ASTM D3338 Kerosene burning characteristics - 24 hour IP 10 Smoke point of kerosene IP 57 Coumarin in kerosene by high performance liquid chromatography (HPLC) IP 374 B Motor octane number of spark ignition engine fuel (MON) IP 236 Research octane number of spark ignition engine fuel (RON) IP 237 Oxidation stability of gasoline - Induction period IP 40 Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) Hydrocarbon types and oxygenates in automotive motor gasoline - Multidimensional GC IP 394 IP 566 PIONA / PNA / npipna / OPNA / PONA / PHONA analysis by Reformulyzer GC IP 566 Winter specification MTBE analysis by Reformulyzer gas chromatograph (GC) ASTM D5441 Corrosiveness of silver from petroleum products by silver strip test IP 611 Gum content of light and middle distillate fuels - Jet evaporation IP 131 Diesel and domestic heating fuels - Determination of cold filter plugging point (CFPP) IP 309 Cloud point of petroleum products - Automatic stepped cooling IP 444 Petroleum products - Determination of cloud point (manual ) IP 219 Petroleum products - Determination of pour point IP 15 Fatty acid methyl ester (FAME) content in middle distillates - Infrared (IR) spectrometry IP 579 Contamination in middle distillates IP 440 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) IP 450 Ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber ignition quality tester (IQT) IP 498

Derived cetane number (DCN) of diesel fuel oils - Ignition delay and combustion delay using a constant volume combustion chamber (CID) ASTM D7668 Calculation of cetane index of middle-distillate fuels by the four-variable equation IP 380 Oxidation stability of middle-distillate fuels IP 388 Acid or base number - Colour-indicator titration IP 139 Weak and strong acid number - Potentiometric titration IP 177 Crude petroleum - Determination of water content - Coulometric Karl Fischer titration Petroleum products - Determination of water - Coulometric Karl Fischer titration Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration Aromatic hydrocarbon types in middle distillates - HPLC with refractive index detection (suitable for streams which contain FAME) Aromatic hydrocarbon types in middle distillates - HPLC with refractive index detection (not suitable for streams which contain FAME) ASTM colour of petroleum products Marker Content in Gas Oil by Lovibond Comparator IP 386 IP 438 IP 539 IP 391 IP 548 ASTM D1500 HMCE Warehouse Method Determination of ash * IP 4 Carbon residue - Micro (MCRT) IP 398 Calculated carbon aromaticity index (CCAI) BS ISO 8217 sec 6.3a Sulphur content - Energy-dispersive x-ray fluorescence (EDXRF) spectrometry * IP 336 Aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorous in residual fuel oil by ashing, fusion and ICP-OES IP 501 Total sediment in residual fuel oils - Part 1: Determination by hot filtration IP 375 Total sediment in residual fuel oils - Part 2: Determination using standard procedures for ageing IP 390 (A) Crude petroleum and fuel oils: Determination of sediment (extraction ) IP 53 Asphaltenes (heptane insolubles) in crude petroleum and petroleum products IP 143 Hydrogen sulphide in fuel oils - Rapid liquid phase extraction IP 570 Carbon, hydrogen and nitrogen content of petroleum products and lubricants * Crude petroleum and liquid petroleum products: Determination of density - Hydrometer ASTM D5291 IP 160

Determination of vapour pressure - Reid IP 69 Total salts content of crude oil - conductivity IP 265 Organically bound trace nitrogen - Oxidative combustion and chemiluminescence Isolation and determination of petroleum naphthenic acids by Fourier transform infrared (FTIR) spectroscopy Determination of ph Total dissolved solids (TDS) in water Total suspended solids (TSS) in effluent Determination of sulphide Ion in water Silica in aqueous streams by Hach meter Chloride by MOHR s Conductivity of water by Hach meter Anions by ion chromatography (IC) - chloride, phosphate, sulphate, thiosulphate Phosphate in aqueous streams by Hach meter IP 379 ASTM D4658 ASTM D1125 Alkalinity - p(a), p(b) and methyl orange alkalinity (MEO) BS 1427 Copper, iron and sodium in aqueous samples by inductively coupled plasma emission spectrometry (ICP-OES) Determination of gravimetric oil using petroleum ether Oil in effluent by Fourier transform infrared (FTIR) spectroscopy - Three peak Colour of clear liquids: Platinum-Cobalt scale Bromine index and bromine number of aromatic hydrocarbons by coulometric titration Density by Twaddell hydrometer (Based on ASTM D2778) HMSO Blue Book Methods for Waters: No.77 A (1983) ASTM D1209 ASTM D1492 Mercury in hydrocarbons gases and LPG by atomic fluorescence BS ISO 6978-2: Part 2 (modified) Mercury content of hydrocarbon liquids by atomic fluorescence Composition of LPG and propylene concentrates - Gas chromatography IP 264 Analysis of natural gas streams * ASTM D1945-03 (modified)

Commercial propane and butane - Analysis by gas chromatography (GC)* BS EN 27941-1994 (modified) Composition of fuel gas streams by Hi-speed refinery gas analyser (RGA)* Analysis by Hi-speed refinery gas analyser (RGA) Trace fixed gases by gas chromatography with helium ionisation detector (GC HID) Sulphur content of liquefied petroleum gas (LPG) - Ultraviolet fluorescence (UVF) Boiling range distribution of petroleum fractions by gas chromatography (SIMDIS) Sulphur compounds in liquefied petroleum gases (LPG), gases and liquids by gas chromatography with pulsed flame photometric detector (GC PFPD) ASTM D2887 Hydrogen sulphide (H2S) in commercial butane and propane (Stain test) BS 4250 (Annex C) Residues in liquefied petroleum gases (LPG) ASTM D2158 Determination of residue of hydrocarbon liquids on evaporation by water bath BS 4524 Soluble metals in new and used oils by inductively coupled plasma emission spectrometry (ICP-OES) - organic mode Microbiological analysis in fuels, lubricant and water samples IP 613 Analysis of ethylene product by gas chromatography (GC) ASTM D2505 Assessment of the dryness of propane - Valve freeze IP 395 Physical properties of liquefied petroleum gas (LPG) from compositional analysis - Calculation Analysis of ethanol as a blending component for petrol by gas chromatography (GC) Ethanol analysis Polymer (polyethylene, polypropylene) analysis ASTM D2598 IP 571 Details on request Details on request