Engine Powered Cushion Tyre Forklift Trucks 2.0 3.3 tonnes FGC20N FGC25N FGC28N FGC30N FGC33N
1.1 1.2 1.3 1.4 1.5 1.6 1.8 1.9 2.1 2.2 2.3 3.1 3.2 3.3 3.5 3.6 3.7 4.1 4.2 4.3 4.4 4.5 4.7 4.8 4.12 4.19 4.20 4.21 4.22 4.23 4.24 4.31 4.32 4.33 4.34 4.35 4.36 5.1 5.2 5.3 5.5 5.7 5.9 5.10 7.1 7.2 7.3 7.4 7.5 8.1 8.2 8.3 Characteristics Manufacturer (abbreviation) Manufacturer s model designation Power source: (battery, diesel, LP gas, petrol) Operator type: pedestrian, (operator)standing, seated Load capacity Load centre distance Load distance, axle to fork face Wheelbase Weight Truck weight, without load / including battery (simplex mast, lowest lift height) Axle loading with maximum load, front/rear (simplex mast, lowest lift height) Axle loading without load, front/rear (simplex mast, lowest lift height) Wheels, Drive Train Tyres: V=solid, L=pneumatic, SE=solid pneumatic front/rear Tyre dimensions, front Tyre dimensions, rear Number of wheels, front/rear (x=driven) Track width (centre of tyres), front Track width (centre of tyres), rear Dimensions Mast tilt, forwards/backwards Height with mast lowered (see tables) Free lift (see tables) Lift height (see tables) Overall height with mast raised Height to top of overhead guard Seat height Tow coupling height Overall length Length to fork face (includes fork thickness) Overall width Fork dimensions (thickness, width, length) Fork carriage to DIN 15 173 A/B/no Fork carriage width Ground clearance under mast, with load Ground clearance at centre of wheelbase, with load (forks lowered) Working aisle width with 1000 x1200 mm pallets, crosswise Working aisle width with 0 x1200 mm pallets, crosswise Turning circle radius Minimum distance between centres of rotation Performance Travel speed, with/without load Lifting speed, with/without load Lowering speed, with/without load Rated drawbar pull, with/without load Gradeability, with/without load Acceleration time (10 metres) with/without load Service brakes (mechanical/hydraulic/electric/pneumatic) IC Engine Manufacturer / Type Rated output to ISO 5 Rated speed to DIN 70 020 Number of cylinders / cubic capacity Fuel consumption according to VDI 60 cycle Miscellaneous Type of drive control Maximum operating pressure for attachments Oil flow for attachments Q c x y b10 b11 () α/β h1 h2 h3 h4 h6 h7 h10 l1 l2 b1/b2 s, e, l b3 m1 m2 Ast3 Ast3 Wa b13 km/h m/s m/s N % s kw rpm /cm3 l/h / /h bar l/min FGC20N 2000 415 3338 4525/ 1384/1954 21 x 7 x 15 16 x 6 x 101/2 886 5/9 3295 20 3320 2295 1065 / 1130 45 / 100 / 1070 2A 920 35 33 1965 17.5/18 0,58 / 0,59 16700/ 35/ FGC25N 2 420 3700 5211/ 1285/2415 21 x 7 x 15 16 x 6 x 101/2 886 5/9 3295 20 3385 2360 1065 / 1130 45 / 100 / 1070 2A 920 3640 3440 2020 17.5/18 0,64 / 0,65 19200/ 34.8/ FGC28N 2750 4104 5739/ 1381/2723 16 x 6 x 101/2 4540 20 3440 2415 3700 3 2065 20100/ 32.7/ FGC30N 3000 4300 6038/ 1314/2986 16 x 6 x 101/2 4540 20 35 2450 3730 3530 2095 20000/ 30.4/ FGC33N 2950 600 4508 6454/ 1304/3204 16 x 6 x 101/2 2230 20 3 25 3760 3560 2125 190/ 28,3/ Ast = Working aisle width with load a = Safety clearance (200 mm) l6 = Pallet length (0 or 1000 mm) b12 = Pallet width (1200 mm)
Mast Performance and Capacity Mast type Simplex Duplex Triplex FGC20N / FGC25N FGC20N FGC25N h3 h1 h4 h2 / h5 Q @ Q @ c = c = mm mm mm mm mm mm 2000 1460 3260 2000 2 2760 1840 4020 2000 2 3000 1 4260 2000 2 32 2105 4550 2000 2 3720 2365 49 2000 2 40 2550 5350 2000 2 2820 1870 40 605 2000 2 3000 1 4270 6 2000 2 3300 845 2000 2 4030 1870 5300 605 2000 2 4300 1 5570 695 2000 2 50 6020 845 1950 2450 5060 2230 6330 965 10 2400 5 2375 6770 1105 10 1850 59 2555 7260 12 1050 1050 Mast type Simplex Duplex Triplex FGC28N / FGC30N / FGC33N FGC28N FGC30N FGC33N h3 h1 h4 h2 / h5 Q @ Q @ Q @ c = c = c = 600 mm mm mm mm mm mm mm 3030 19 4300 2750 3000 2950 3270 4540 2750 3000 2950 3700 2375 4970 2750 3000 2950 4000 2555 5270 2750 3000 2950 2770 1870 4040 600 2750 3000 2950 3000 19 4270 720 2750 3000 2950 3250 4520 840 2750 3000 2950 4320 19 55 720 2750 3000 2950 00 5970 840 2750 2950 2950 5060 2230 6330 2600 20 2850 5450 2375 6720 1105 1850 1850 h1 h2 h3 h4 h5 Q c Height with mast lowered Standard free lift Lift height Height with mast raised Full free lift Lifting capacity, rated load Load centre (distance) The capacities are applicable for cushion tyres (V). All dimensions include load backrest. In case load backrest is not used h5 will increase by 640 mm (FGC20N, FGC25N), 610 mm (FGC28N, FGC30N, FGC33N), while h4 will decrease by 640 mm (FGC20N, FGC25N), 610 mm (FGC28N, FGC30N, FGC33N). CESM0982 (01/09) 2009 MCFE Printed in The Netherlands mitforklift@mcfe.nl www.mitforklift.com NOTE: Performance specifications may vary depending on standard manufacturing tolerances, vehicle condition, types of tyres, floor or surface conditions, applications or operating environment. Trucks may be shown with nonstandard options. Specific performance requirements and locally available configurations should be discussed with your distributor of forklift trucks. follows a policy of continual product improvement. For this reason, some materials, options and specifications could change without notice.
Main features Setting new standards for IC engine cushion tyre counterbalance forklift trucks, the FGC N series from has been developed to help your driver achieve maximum productivity. Packed with advanced features, it offers an unbeatable combination of performance, ergonomics, safety and economy. The cushion tyres on these models give excellent traction on smooth surfaces and thanks to their low rolling resistance reduce energy consumption. They also minimise truck dimensions, for greater manoeuvrability in tight spaces, and combined with the special powertrain layout give low centre of gravity, increasing residual capacities at high lifts, which results in high efficiency. Inbuilt safety features, throughout the design, allow safe productivity. The operator detection system disables drive, lift and tilt functions when the operator is not seated. Long service interval hours reduces cost of ownership and increases productivity. Stateoftheart engine, with engine management system, onthefly timing adjustment and regulated catalytic converter, delivers high performance, high efficiency and low emissions and low noise. Active engine protection system, solidstate distributorless ignition system (longer life time), squarewave fin radiator (less clogging) and the singlepiece leakfree cast drive axle housing all prevent downtime. Onboard electronics enable easy troubleshooting and help reduce service time and increase productivity. Almost all moving components are rubber mounted resulting in low noise levels and low vibration increase operator comfort. Automotive style pedal layout, quality seat and adjustable hydraulic levers and steering column provide extra comfort. Highvisibility mast, fork carriage, head guard and lowprofile counterweight design ensure excellent allround vision. Options Integral side shifter Additional working lights and revolving lamps Highexit exhaust Dual front wheels
Developed for outstanding performance and genuine value for money, the awardwinning* range of forklift trucks and warehouse equipment is built to a higher specification to maximize productivity and ensure utter reliability... whatever the application. It s what you d expect from one of the world s largest corporations whose companies are at the leading edge of technologies where performance, quality and dependability can never be compromised. It means that, from a single safe source, we can meet 98% of all handling requirements, supplied to you via a range of competitive finance options including outright purchase, rental or leasing. So your local dealer can advise you on precisely the right product for your application... and your budget. Moreover, because we understand how much you depend on your forklift truck, we deliver the highest levels of customer support. Through a network of carefully selected dealerships, we provide quality maintenance and customer care programmes including a choice of warranties that give complete peace of mind. Every dealership holds extensive stocks of manufacturerapproved parts, backed by a central store that holds literally millions of items constantly in stock and achieves a firstpick fulfilled rate of 97%. So your truck can be fixed first time, virtually every time. You can find your nearest dealer at www.mitforklift.com * Forklift Trucks has won four separate Fork Lift Truck Association Annual Awards for Excellence covering the areas of Ergonomics, the Environment and Innovation.