CORPO
27 Congratulations! You have chosen an exceptional chair, one which combines highest functional quality with simplest operating means. In order to make the most of your CORPO, read our advice for easy use on the following pages. Enjoy your CORPO by Girsberger! Design: Burkhard Vogtherr Under license of DAVIS, USA
This is how to adjust CORPO to the anatomy of your body by using the synchronous mechanism. Seat height Use the lever behind the crossbeam on the right of the seat (from the seated perspective) to adjust the seat s height: Pull the lever up, then let it go as soon as the seat reaches the right height. Seat depth The sliding seat can be pushed forward or backward after the twist grip under the back of the seat has been loosened.
29 117 Synchronized dynamic sitting The lever under the front left side of the seat allows you to choose between synchronous movement of the chair, or fixing the seat and backrest in their foremost position. If you draw the lever back and lean against the backrest, then CORPO will follow your movements synchronously. If you push the lever forward, CORPO will lock into position. Weight adjustment The twist grip under the front of the seat can be used to adjust the chair s tension. This allows you to adapt the backrest support to exactly suit the weight of your body. Turn the grip clockwise and the supportive pressure will be increased. Turn it in the opposite direction and the pressure will be reduced.
Fixed armrest Adjustable armrest Pivot range of adjustable armrests Armrests CORPO offers a choice of fixed or height-adjustable armrests. The armrest height can be adjusted by pressing the push-button which is located under the armrest cap. It is also possible to adjust the angle of the armrest cap by ±30. Equipping the chair with armrests at a later date is not a problem.
31 Find your ideal sitting position. The height of your seat is correct when your legs form an angle of 90 at the knees, with thighs and feet horizontally positioned. Make sure that there is no pressure on the underside of your thighs (blood congestion!). Your work surface is at the right height when your arms also form an angle of approximately 90 at the elbows, and your forearms rest in a horizontal position on top of the desk. The proper care for your CORPO All of CORPO s mechanical and movable parts, as well as all aluminium or dyed-through plastic parts, are maintenance-free. The upholstery can be cleaned with a soft brush and a normal fabric cleaning agent. Napa leather should be washed occasionally with welldiluted soapy water and wiped off with clear water afterwards. Allow to dry, then polish with a woollen cloth. Do not use a cleaning agent! The aluminium parts can be cleaned with a fine, damp microfiber cloth. If the chair is on a carpet, you should periodically remove the carpet fluff which can accumulate around the castors.
Animated operating instructions You will find the animated operating instructions under www.girsberger.com/corpo A word on safety CORPO s construction is based on international safety standards and requirements, as well as on years of Girsberger expertise in office seating techniques. All of the chair s plastic parts are resistant to impact, scratches and chipping. CORPO is designed to be used as an office chair for one person. If the chair is put to any other use, Girsberger will not accept liability. Children should not be allowed to play unsupervised in the vicinity of CORPO. The pneumatic spring unit should not be exposed to heat or opened by force. Work on or replacement of the pneumatic springs may only be done by trained specialists. The standard model comes with castors for carpeted floors. Soft castors for hard floors can be recognized by the coloured ring on the outside rim. Tested according to EN 1335
39
Girsberger Werke mit Ausstellungszentren Usines Girsberger avec centre d exposition Stabilimento Girsberger con centri espositivi Schweiz, CH-4922 Bützberg Tel. +41(0)62 958 58 58 Deutschland, D-79346 Endingen Tel. +49(0)7642 68 98 0 Türkei, 34947 Istanbul Tel. +90(0)212 715 23 24 Fábricas Girsberger con sala de exposición Girsberger plants with showrooms Girsberger meubelfabrieken met schowrooms Girsberger Niederlassungen mit Ausstellungszentren Filiales Girsberger avec centre d exposition Filiali Girsberger con centri espositivi Sucursales Girsberger con sala de exposición Girsberger subsidiaries with showrooms Deutschland, D-20457 Hamburg Tel. +49(0)172 620 96 06 Frankreich, F-75015 Paris Tel. +33(0)1 43 35 22 21 Benelux, NL-1101 CM Amsterdam-Z.O. Tel. +31(0)20 696 81 97 Türkei, 06650 Gazi Osman Paşa-Ankara Tel. +90(0)312 437 31 01 Türkei, 34662 Altunizade-Istanbul Tel. +90(0)216 474 44 44 Girsberger vertegenwoordigingen met schowrooms Nr. 520 774 01/16 www.girsberger.com