380 South Street 7596-763, TX Nacogdoches Phone: 936-569-79 Fax: 936-560-685 BUB00M -In Mog Cond Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features connection Material Material, Color, and Finish Finish Dimensions and Weight Height Hub Size Length Width BUB00M Appleton/Oz Gedney Mogul Unilets Ub Nec 6X Conduit Outlet Body With Assembled Cover and Gasket, Hub Size: In, Length: 30.88 In, Width: 5.63 In, Height: 0.3 In, Material: Malleable Iron, Finish: Triple-Coat (Zinc Electroplate, Chromate and Epoxy Powder Coat), Connection: Tapered Female Threaded, Standard: Ul 5B, Ul File Number E57, Csa C. No. 8.3, Csa 06583, Nema FB-, For Use With Rigid Metal Conduit and Imc 63.0 (lbs/each) Bodies & Covers Tapered Female Threaded MALLEABLE IRON Zinc Electroplate/Chromate/Epoxy Powder Coat DURAPORT INDUSTRIAL HOUSING CONNECTOR CAP in 30.88 in LMS 30K CTO 0 RPC WL BL
380 South Street 7596-763, TX Nacogdoches Phone: 936-569-79 Fax: 936-560-685 Descriptions Description Long Description Product Special Features Manufacturer Information Brand APPLETON GTIN 007838783 Manufacturers Part Number BUB00-M sub brand Mogul UNILETS UPC 7838783 -IN MOG COND BODY Mogul UNILETS UB NEC 6X Conduit Outlet Body With Assembled Cover And Gasket, Hub Size: IN, Length: 30.88 IN, Width: 5.63 IN, Height: 0.3 IN, Material: Malleable Iron, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Connection: Tapered Female Threaded, Standard: UL 5B, UL File Number E57, CSA C. No. 8.3, CSA 06583, NEMA FB-, For Use With Rigid Metal Conduit And IMC Mogul Unilet Ub Exclusive built-in rollers facilitate cable pulling; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; Covers have captive stainless steel screws to speed installation, prevent freezing of screws; Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds six times the trade diameter of the conduit per NEC 3.8(A)(); Bending space requirement: These moguls also meet Taxonomies, Classifications, and Categories Category Description FORM 7, 8, CONDULETS, COVERS, & GASKETS UB NEC 6X Conduit Outlet Body With Assembled Cover And Gasket Packaging Carton Weight Per each 63 Uses, Certifications, and Standards Application For Use With Rigid Metal Conduit And IMC standard UL 5B, UL File Number E57, CSA C. No. 8.3, CSA 06583, NEMA FB-
Class I, Division per NEC 50.0(B)() Applications Larger body size facilitates pulling of large and heavy conductors. Specially designed raised cast covers provide additional wiring area. Mogul Unilets for pulling straight, 5 or 90 angle turns and/or making taps and splices. Features Exclusive built-in rollers facilitate cable pulling. Available on NEC 6x8x Series Moguls (C, LB and UB) in sizes -/ and up. Smooth, rounded integral bushing in each hub protects conductor insulation. Accurately tapped, tapered threads for tight, rigid joints and ground continuity. Covers have captive stainless steel screws to speed installation, prevent freezing of screws. LB and UB Moguls Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds six times the trade diameter of the conduit per NEC 3.8(A)(). Bending Space Requirement: these moguls also meet the NEC 3.8(A)() Exception requirement spelled out in NEC 3.6(A) Table. C Moguls Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds eight times the trade diameter of the conduit per NEC 3.8(A)(). Bending Space Requirement: not applicable. LL and LR Moguls Like LB moguls, these moguls have an end hub. The second hub is in the side (LL left and LR right) instead of the back. T Moguls These are like C moguls ( thru ), except with an additional middle side hub. Distance between the centerline of each C hub conduit stop exceeds eight times the trade diameter of the conduit per NEC 3.8(A)(). Standard Materials Bodies and covers: malleable iron or copperfree (/0 of % max.) aluminum Gaskets: neoprene Screws: stainless steel Standard Finishes Malleable iron bodies and covers: triple-coat () zinc electroplate, () chromate and (3) epoxy powder coat Aluminum bodies and covers: epoxy powder coat NEC/CEC Certifications and Compliances UL Standard: 5B UL Listed: E57 CSA Standard: C. No. 8.3 CSA Certified: 06583 NEMA Standard: FB- C NEC 8x LB - NEC 6x LB -/ - NEC 6x UB NEC 6x LR NEC 6x LL NEC 6x T NEC 8x Rollers make cable-pulling easier, eliminate insulation damage If less than maximum conductors permitted by NEC are used, smaller wires may be used additionally through LL, LR or T hubs. If large conductors are required to be bent in LL, LR or T direction, order junction boxes instead. See Enclosures and Junction Boxes. 68 Visit our website at www.emerson.com or contact us at (800) 6-506. February 07
Class I, Division per NEC 50.0(B)() Hub Size (Inches) Max. Wire Fill Body, Cover and Gasket Cover and Gasket Malleable Iron Aluminum Gasket Only Malleable Iron Aluminum C NEC 8X (3) # BC00-M BC00-A BG00 BKG00-M BKG00-A -/ (3) # /0 BC5-M BC5-A BGC5 BKGC5-M BKGC5-A - -/ (3) # 3/0 BC50-M BC50-A BG50 BKG50-M BKG50-A (3) 300 BC00-M BC00-A BGC00 BKGC00-M BKGC00-A -/ (3) 00 BC50-M BC50-A BGC50 BKGC50-M BKGC50-A 3 (3) 700 BC300-M BC300-A BGC300 BKGC300-M BKGC300-A -/ - 3-/ (3) 900 BC350-M BC350-A BGC350 BKGC350-M BKGC350-A (3) 000 BC00-M BC00-A BGC00 BKGC00-M BKGC00-A LB NEC 6X (3) # BLB00-M BLB00-A BG00 BKG00-M BKG00-A -/ (3) # /0 BLB5-M BLB5-A BGL5 BKGL5-M BKGL5-A UB NEC 6X - -/ - - -/ (3) # 3/0 BLB50-M BLB50-A BG50 BKG50-M BKG50-A (3) 300 BLB00-M BLB00-A BGL00 BKGL00-M BKGL00-A -/ (3) 00 BLB50-M BLB50-A BGL50 BKGL50-M BKGL50-A 3 (3) 700 BLB300-M BLB300-A BGL300 BKGL300-M BKGL300-A 3-/ (3) 900 BLB350-M BLB350-A BGL350 BKGL350-M BKGL350-A (3) 000 BLB00-M BLB00-A BGL00 BKGL00-M BKGL00-A (3) # BUB00-M BUB00-A BG00 BKG00-M BKG00-A -/ (3) # /0 BUB5-M BUB5-A BGL5 BKGL5-M BKGL5-A -/ (3) # 3/0 BUB50-M BUB50-A BG50 BKG50-M BKG50-A (3) 300 BUB00-M BUB00-A BGL00 BKGL00-M BKGL00-A -/ (3) 00 BUB50-M BUB50-A BGL50 BKGC50-M BKGC50-A 3 (3) 700 BUB300-M BUB300-A BGL300 BKGU300-M BKGU300-A 3-/ (3) 900 BUB350-M BUB350-A BGL350 BKGC350-M BKGC350-A -/ - (3) 000 BUB00-M BUB00-A BGL00 BKGU00-M BKGU00-A Furnished with rollers for easier cable pulling. Visit our website at www.emerson.com or contact us at (800) 6-506. February 07 69
Class I, Division per NEC 50.0(B)() Hub Size (Inches) Max. Wire Fill Body, Cover and Gasket Cover and Gasket Malleable Iron Aluminum Gasket Only Malleable Iron Aluminum LL NEC 6X (3) # BLL00-M BLL00-A BG00 BKG00-M BKG00-A -/ (3) # BLL5-M BLL5-A BGL5 BKGL5-M BKGL5-A -/ (3) # /0 BLL50-M BLL50-A BG50 BKG50-M BKG50-A - (3) # /0 BLL00-M BLL00-A BGL00 BKGL00-M BKGL00-A LR NEC 6X (3) # BLR00-M BLR00-A BG00 BKG00-M BKG00-A -/ (3) # BLR5-M BLR5-A BGL5 BKGL5-M BKGL5-A -/ (3) #/0 BLR50-M BLR50-A BG50 BKG50-M BKG50-A - (3) # /0 BLR00-M BLR00-A BGL00 BKGL00-M BKGL00-A T NEC 8X (3) # BT00-M BT00-A BG00 BKG00-M BKG00-A - -/ - Wiring Capacity for Mogul Bodies with Covers: Malleable Iron and Aluminum -/ (3) # BT5-M BT5-A BGC5 BKGC5-M BKGC5-A -/ (3) #/0 BT50-M BT50-A BG50 BKG50-M BKG50-A (3) # /0 BT00-M BT00-A BGC00 BKGC00-M BKGC00-A -/ (3) 300 BT50-M BT50-A BGC50 BKGC50-M BKGC50-A 3 (3) 350 BT300-M BT300-A BGC300 BKGC300-M BKGC300-A 3-/ (3) 350 BT350-M BT350-A BGC350 BKGC350-M BKGC350-A (3) 350 BT00-M BT00-A BGC00 BKGC00-M BKGC00-A Hub Size (Inches) Mogul Capacity dm 3 (in 3 ) Hub Size (Inches) Mogul Capacity dm 3 (in 3 ) -/ -/ C, LB, LL, LR, T, UB 0.50 (3.00) -/ C, T 5.9 (335.00) LB 3. (0.00) C, T 0.8 (50.00) UB 6.5 (375.00) LB 0.79 (8.00) C, T 7.78 (75.00) LL, LR 0.69 (.00) 3 LB 5.65 (35.00) UB 0.66 (0.00) UB 7.9 (5.00) C, LL, LR, T.5 (93.00) C, T 3.60 (830.00) LB.75 (07.00) 3-/ LB 8.9 (500.00) UB.9 (9.00) UB 3.77 (80.00) C, T.3 (3.00) C, T 6.55 (00.00) LB.37 (5.00) LB.3 (70.00) LL, LR, UB.0 (3.00) UB 5.73 (960.00) 70 Visit our website at www.emerson.com or contact us at (800) 6-506. February 07
Class I, Division per NEC 50.0(B)() Bending Radius of Moguls Catalog Number Hub Size (Inches) R Millimeters (Inches) BLB00-A,M. (.63) 66.8 (.63) R LB Mogul - LB BLB5-A,M -/ 57. (.5) 9. (3.63) BLB50-A,M -/ 66.8 (.63) 0.9 (.3) BLB00-A,M 76. (3.00) 7.0 (5.00) BLB50-A,M -/ 98.6 (3.88) 58.8 (6.5) BLB300-A,M 3 7.0 (5.00) 03. (8.00) BLB350-A,M 3-/ 7.0 (5.00).9 (8.38) LB Mogul -/ - UB Mogul - UB Compliances with NEC Bending Space Requirements Bending Space Defined NEC 3.8(A)() Exception. This article applies to LB and UB Moguls, defines bending space and refers to NEC 3.6(B) Table as guideline for determining minimum bending space distance. Bending space is illustrated as Dimension A below: BLB00-A,M 58.8 (6.5) 60. (0.5) BUB00-A,M.3 (.50) 39.7 (5.50) BUB5-A,M -/ 7.6 (.63) 5. (6.00) BUB50-A,M -/ 77.8 (7.00) 5.9 (8.50) BUB00-A,M 90.5 (7.50).3 (9.50) BUB50-A,M -/ 333.5 (3.3) 393.7 (5.50) BUB300-A,M 3 35.6 (3.88) 8.8 (6.88) BUB350-A,M 3-/ 50.7 (9.75) 590.6 (3.5) BUB00-A,M 57. (0.75) 68.7 (.75) Bending Space of Moguls (Dim. A in sketches at left) Mogul Size Distance LB, UB -/ -/ LB, UB 3-/ -/ LB, UB LB, UB 5 -/ LB, UB 6 3 LB, UB 8 3-/ LB, UB 8 AWG or Circular-Mill. Minimum Wire Bending Space NEC 3.6(B) Table: The applicable portion of this table is shown below. Only the Wire Per Terminal column is retained, because the others are not applicable. Example for using table below and table at right: 350MCM wire size requires 5 bending space. A LB or UB Appleton Mogul is suitable. LB, UB 0 Size of Wire Wire per Terminal Min. Bending Space LB Mogul - -0 Not Specified LB Mogul -/ - NOTE ON Radius TABLE: Secure cable or wire bending radius from manufacturer. Then select a mogul having this radius or more. If radius is 6-/, an LB -/ mogul or BUB -/ mogul is suitable. NOTE ON NEC 3.6(B) TABLE: Because cable sizes vary, table is limited to single wire sizes. Use as guideline only for cable sizes. 8-6 -/ -3 -/ 3 0-00 3-/ 000-0000 50 MCM -/ 300-350 MCM 5 00-500 MCM 6 600-700 MCM 8 750-900 MCM 8,000-,50 MCM 0 UB Mogul -,500-,000 MCM Visit our website at www.emerson.com or contact us at (800) 6-506. February 07 7
Class I, Division per NEC 50.0(B)() Applicable NEC References for C, LB and UB Moguls Straight Pull Length Requirements: NEC 3.8(A)() C Moguls... shall not be less than eight times the trade diameter of the largest raceway. (See table at right.) Angle or U Pull Length Requirements: NEC 3.8(A)() LB, UB Moguls The distance between each raceway entry inside the box and the opposite wall of the box shall not be less than six times the trade diameter of the largest raceway. (See next page.) Bending-Space Requirements: NEC 3.8(A)(). Exception 3.6(A) Table LB, UB Moguls Where a conduit or cable entry is in the wall of a box or conduit body opposite to a removable cover. (See dim. A, table right) Length and Bending Space Requirements: C Mogul thru LB Mogul thru LB Mogul -/ thru UB Mogul thru BENDING SPACE EXAMPLE: LB with 3 hubs (Cat. No. BLB300-M) using 500 MCM wire with four conductors. Table on next page shows that, in this example, NEC requires a bending space of 6 and that the Appleton 3 LB provides a bending space of 8. * Dimension A is bending space. C Moguls Straight Pulls: Maximum Number of Conductors, Minimum Lengths Wire Size➊ Maximum Number of Conductors per NEC ➋ Length Requirements (Conduit Stop to Conduit Stop) Maximum Number of Length Requirements (Conduit Stop to Conduit Stop) Per Conductors Per NEC➌ Appleton per NEC ➋ NEC➌ Appleton Hubs BC00-M and BC00-A -/ Hubs BC5-M and BC5-A 8 8 7 0 0 3 3 8 8 6 0 0 3 8 8 5 0 0 - - - 3 0 0 0 - - - 3 0 0 -/ Hubs BC50-M and BC50-A Hubs BC00-M and BC00-A 9 6 6 6 3 8 3 6 6 7 6 6 5 8 6 6 0 7 6 6 00 3 6 6 6 000 3 5 6 6 0000 - - - 6 6 50 - - - 3 6 6 300 - - - 3 6 6 -/ Hubs BC50-M and BC50-A 3 Hubs BC300-M and BC300-A 0 0 35 3 9 0 0 9 6 0 0 5 0 0 8 0 0 0 0 5 00 8 0 0 3 000 7 0 0 0000 6 0 0 9 50 0 0 7 300 0 0 6 350 3 5 0 5 00 3 5 0 5 500 - - - 600 - - - 3 700 - - - 3 3-/ Hubs BC350-M and BC00-A Hubs BC00-M and BC00-A 7 8 8 60 3 3 3 39 8 8 5 3 3 33 8 8 3 3 3 5 8 8 3 3 3 0 8 8 7 3 3 00 7 8 8 3 3 3 000 8 8 8 3 3 0000 8 8 5 3 3 50 0 8 8 3 3 300 8 8 8 3 3 350 7 8 8 9 3 3 00 6 8 8 8 3 3 500 5 8 8 7 3 3 600 8 8 5 3 3 700 8 8 5 3 3 750 3 8 8 3 3 800 3 8 8 3 3 900 3 8 8 3 3 000 - - - 3 3 3 NEC 3.8(A), 3(A)(). Limited to minimum # wire. NEC Chapter 9, Table 3B. NEC 370.8(A)(). This is 8 times conduit trade size. 7 Visit our website at www.emerson.com or contact us at (800) 6-506. February 07
Class I, Division per NEC 50.0(B)() LB and UB Moguls- Angle or U Pulls: Max. No. Conductors, Min. Lengths, Min. Bending Spaces Wire Size➊ Maximum Number of Conductors per NEC ➋ Length Requirements (Conduit Stop to Conduit Stop) (A) Bending Space Requirements Per Per NEC➌ Appleton NEC➌ Appleton Maximum Number of Conductors per NEC ➋ Per Length Requirements (Conduit Stop to Conduit Stop) Per NEC➌ Appleton (A) Bending Space Requirements NEC➌ Appleton Hubs BLB00-M, BLB00-A, BUB00-M and BUB00-A -/ Hubs BLB5-M, BLB5-A, BUB5-M and BUB00-A 6 6 -/ 7 7-/ 7-/ 3-/ 3 3 6 6 -/ 6 7-/ 7-/ 3-/ 3 6 6 -/ -/ 5 7-/ 7-/ -/ 3-/ - - - - - 3 7-/ 7-/ 3 3-/ 0 - - - - - 3 7-/ 7-/ 3-/ 3-/ -/ Hubs BLB50-M, BLB50-A, BUB50-M and BUB50-A Hubs BLB00-M, BLB00-A, BUB00-M and BUB00-A 9 9 9 6 5 3 8 9 9 3 5 7 9 9 -/ -/ 5 5 9 9 3 8 3 5 0 9 9 3-/ 7 3-/ 5 00 3 9 9 3-/ 6 3-/ 5 000 3 9 9 5 5 0000 - - - - - 5 50 - - - - - 3 -/ 5 300 - - - - - 3 5 5 -/ Hubs BLB50-M, BLB50-A, BUB50-M and BUB50-A 3 Hubs BLB300-M, BLB300-A, BUB300-M and BUB300-A 5 5 6 35 8 8 8 3 9 5 5 6 9 8 8 8 6 5 5 -/ 6 5 8 8 -/ 8 5 5 3 6 8 8 8 3 8 0 0 5 5 3-/ 6 5 8 8 3-/ 8 00 8 5 5 3-/ 6 3 8 8 3-/ 8 000 7 5 5 6 8 8 8 0000 6 5 5 6 9 8 8 8 50 5 5 -/ 6 7 8 8 -/ 8 300 5 5 5 6 6 8 8 5 8 350 3 5 5 5 6 5 8 8 5 8 00 3 5 5 6 6 5 8 8 6 8 500 - - - - - 8 8 6 8 600 - - - - - 3 8 8 8 8 700 - - - - - 3 8 8 8 8 3-/ Hubs BLB350-M, BLB350-A, BUB350-M and BUB350-A Hubs BLB00-M, BLB00-A, BUB00-M and BUB00-A 7 8 60 0 3 39 8 5 0 33 -/ 8 3 -/ 0 5 3 8 3 3 0 0 3-/ 8 7 3-/ 0 00 7 3-/ 8 3-/ 0 000 8 8 0 0000 8 5 0 50 0 -/ 8 -/ 0 300 8 5 8 5 0 350 7 5 8 9 5 0 00 6 6 8 8 6 0 500 5 6 8 7 6 0 600 8 8 5 8 0 700 8 8 5 8 0 750 3 8 8 8 0 800 3 8 8 8 0 900 3 8 8 8 0 000 - - - - - 3 0 0 NEC 3.8(A). Limited to minimum # wire. NEC Chapter 9, Table 3B. NEC 3.8(A)() This is 6 times conduit trade size. NEC 3.8(A)() Exception (3.6(B) Table). This is distance A bending space illustrated on preceding page. Visit our website at www.emerson.com or contact us at (800) 6-506. February 07 73
Class I, Division per NEC 50.0(B)() Dimensions in Millimeters (Inches) Mogul C T LL, LR Hub Trade Size (Inches) -/ -/ -/ 3 3-/ -/ -/ -/ 3 3-/ -/ -/ s C, T Furnished with rollers for easier cable pulling. Dimensions in Millimeters (Inches) s LB, LL, LR A B C D E F G H J K 9. 69.9 60.5 7.8 68. 3.9 6.0 7.8 (9.8) (.75) (.38) (.88) (6.63) (0.9) (.) (.88) 30.8 8. 60.5 7.8 95.3 9.5 76. 55.6 (.00) (3.3) (.38) (.88) (7.69) (.6) (3.00) (.9) 35. 95.3 79.5 63.5 36.5 35. 85.9 65.0 (3.9) (3.75) (3.3) (.50) (9.3) (.38) (3.38) (.56) 55.7.8 79.5 63.5 330.. 0.6 80.8 (7.9) (.) (3.3) (.50) (3.00) (.63) (.00) (3.8) 590.6 30.3 7.6 95.3.5 6.0 7.6 9. (3.5) (5.3) (.63) (3.75) (7.50) (.8) (.63) (3.63) 68.8 50.9 7.6 9. 533. 5.9 38..3 (6.88) (5.9) (.63) (3.63) (.00) (.6) (5.) (.38) 797. 8.6 3.0.3 633.5 63.5 69.9.0 (3.38) (7.9) (5.63) (.50) (.9) (.50) (6.69) (.88) 898.7 9.0 3.0.3 735. 69.9 79.3 33. (35.38) (7.56) (5.63) (.50) (8.9) (.75) (7.06) (5.5) 9. 69.9 60.5 7.8 68. 8.6 3.9 6.0 7.8 (9.8) (.75) (.38) (.88) (6.63) (3.5) (0.9) (.) (.88) 30.8 8. 60.5 7.8 7. 85.9 9.5 76. 55.6 (.00) (3.3) (.38) (.88) (8.56) (3.38) (.6) (3.00) (.9) 35. 95.3 79.5 63.5 63.7 0.9 35. 85.9 65.0 (3.9) (3.75) (3.3) (.50) (0.38) (.3) (.38) (3.38) (.56) 55.7.8 79.5 63.5 358.9 0.9. 0.6 80.8 (7.9) (.) (3.3) (.50) (.3) (.3) (.63) (.00) (3.8) 590.6 30.3 7.6 95.3 7.7 5. 6.0 7.6 9. (3.5) (5.3) (.63) (3.75) (8.69) (6.00) (.8) (.63) (3.63) 68.8 50.9 7.6 9. 563.6 5. 5.9 38..3 (6.88) (5.9) (.63) (3.63) (.9) (6.00) (.6) (5.) (.38) 797. 8.6 3.0.3 665. 8. 63.5 69.9.0 (3.38) (7.9) (5.63) (.50) (6.9) (7.5) (.50) (6.69) (.88) 898.7 9.0 3.0.3 766.8 8. 69.9 79.3 33. (35.38) (7.56) (5.63) (.50) (30.9) (7.5) (.75) (7.06) (5.5) 7. 69.9 60.5 7.8 68. 8.6 3.9 6.0 00. 7.8 (8.9) (.75) (.38) (.88) (6.63) (3.5) (0.9) (.) (7.88) (.88) 6. 8. 60.5 7.8 8. 85.9 9.5 76. 5.9 55.6 (9.69) (3.3) (.38) (.88) (7.5) (3.38) (.6) (3.00) (8.50) (.9) 330. 95.3 79.5 63.5 63.7 0.9 35. 85.9 95. 65.0 (3.00) (3.75) (3.3) (.50) (0.38) (.3) (.38) (3.38) (.63) (.56) 37.6 7.0 79.5 63.5 300.0 0.9. 5.8 38.7 87. (.63) (5.00) (3.3) (.50) (.8) (.3) (.63) (.56) (.9) (3.) Number of Cover Holes 7 Visit our website at www.emerson.com or contact us at (800) 6-506. February 07
Class I, Division per NEC 50.0(B)() Dimensions in Millimeters (Inches) Mogul LB UB Hub Trade Size (Inches) -/ -/ -/ 3 3-/ -/ -/ -/ 3 3-/ LB -/" thru " UB Dimensions in Millimeters (Inches) Number A B C D E G H J K L of Cover Holes 7. 9. 60.5 7.8 68. 3.9 6.0 00. 7.8 7.8 (8.9) (3.63) (.38) (.88) (6.63) (0.9) (.) (7.88) (.88) (.88) 6. 0.7 60.5 7.8 60.3 9.5 87. 5.9 66.8 5.9 (9.69) (.75) (.38) (.88) (6.3) (.6) (3.) (8.50) (.63) (.6) 330. 33. 79.5 63.5 36.5 35. 00. 95. 77.7 60.5 (3.00) (5.5) (3.3) (.50) (9.3) (.38) (3.9) (.63) (3.06) (.38) 37.6 60.3 79.5 63.5 73...0 38.7 87. 68.3 (.63) (6.3) (3.3) (.50) (0.75) (.63) (.88) (.9) (3.) (.69) 5. 03. 9. 88.9 39.3 5. 0.9 0.6 5.8 (7.88) (8.00) (5.88) (3.50) (3.75) (.3) (.3) (5.8) (.56) 6 53.9 5.0 9. 88.9 3.8 63.5 30.3 69.9 36.7 (.06) (0.00) (5.88) (3.50) (7.00) (.50) (5.3) (8.50) (5.38) 6 67.5 60. 77.8 7.6 505.0 76. 0.7 53. 68. (.3) (0.5) (7.00) (.63) (9.88) (3.00) (.75) (.38) (6.63) 6 698.5 37.5 77.8 7.6 58. 8.6 6. 69.3 77.8 (7.50) (.50) (7.00) (.63) (3.00) (3.5) (6.38) (.38) (7.00) 6.6 88.9 60.5 7.8 68. 6.0. 7.8 (9.63) (3.50) (.38) (.88) (6.63) (.) (8.) (.88) 60. 0.9 60.5 7.8 60.3 76. 7. 55.6 (0.5) (.3) (.38) (.88) (6.3) (3.00) (8.9) (.9) 37.7 7.6 79.5 63.5 36.5 85.9 309.6 65.0 (3.69) (.63) (3.3) (.50) (9.3) (3.38) (.9) (.56) 387. 7.0 79.5 63.5 73. 5.8 339.9 80.8 (5.5) (5.00) (3.3) (.50) (0.75) (.56) (3.38) (3.8) 58. 79.3 7.6 95.3.5 38. 5.3.3 (.88) (7.06) (.63) (3.75) (7.50) (5.) (0.3) (.38) 58. 85.7 7.6 95.3.5 73.0 5.3.3 (.88) (7.3) (.63) (3.75) (7.50) (6.8) (0.3) (.38) 78. 6.9 3.0.3 63.0. 698.5 33. (30.88) (0.3) (5.63) (.50) (.88) (8.) (7.50) (5.5) 78. 6.9 3.0.3 63.0. 698.5 33. (30.88) (0.3) (5.63) (.50) (.88) (8.) (7.50) (5.5) Furnished with rollers for easier cable pulling. Visit our website at www.emerson.com or contact us at (800) 6-506. February 07 75