GRUNDFOS DATA BOOKLET CRNE15-12 A-FGJ-G-V-HQQV 3x4 6 HZ Grundfos Pump 96514555 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crne15/96514555/crne-15-12-a-fgj-g-v-hqqv.html info@lenntech.com tel. +31-15-261.9. fax. +31-15-261.62.89 BE > THINK > INNOVATE
Position Qty. Description 1 CRNE 15-12 A-FGJ-G-V-HQQV Product No.: 96514555 Vertical, non-self-priming, multistage, in-line, centrifugal pump for installation in pipe systems and mounting on a foundation. The pump has the following characteristics: - Impellers, intermediate chambers and outer sleeve are made of - Pump head cover and base are made of - The shaft seal has assembly length according to EN 12756. - Power transmission is via cast iron split coupling. flanges/couplings. The pump is fitted with an IEC-flanged three-phase MGE/MMGE motor with frequency converter and PI-controller integrated in the motor terminal box. No additional motor protection is required as both motor and electronics are protected by integrated overload and temperature protection. External sensor can be connected if controlled pump operation based on for example flow, differential pressure or temperature is required. A control panel enables setting of required setpoint as well as setting of pump to MIN or MAX operation or to STOP. The control panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos R1 Remote Control enabling further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for the connection of: - Pump start/stop (potential-free contact), - external remote setpoint setting via analog signal, - 5 V, - 1 V, (4) - 2 ma, - 5 V voltage supply for setpoint potentiometer, Imax = 5 ma, - sensor, - 5 V, - 1 V, (4) - 2 ma, - 24 V voltage supply for sensor, Imax = 4 ma, - input for forced control to MIN, MAX, External fault or Flowswitch (potential-free contact), - potential-free fault signal relay with changeover contact, reporting Fault, Operation or Ready, - RS485 GENIbus. Controls: Frequency converter: Built-in Printed from Grundfos Product Centre [218.2.43]
Position Qty. Description Pressure sensor: N Liquid: Pumped liquid: Water Liquid temperature range: -2.. 9 C Liquid temperature during operation: 2 C Density: 998.2 kg/m³ Technical: Speed for pump data: Rated flow: Rated head: Pump orientation: Shaft seal arrangement: Code for shaft seal: Approvals on nameplate: Curve tolerance: Materials: Base: Impeller: Bearing: 354 rpm 2.5 m³/h 197.9 m Vertical Single HQQV CE, EAC ISO996:212 3B Stainless steel EN 1.448 AISI 316 Stainless steel EN 1.441 AISI 316 SIC Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 25 bar Max pressure at stated temp: 25 bar / 9 C 25 bar / -2 C Type of connection: DIN / ANSI / JIS Size of inlet connection: DN 5 2 inch Size of outlet connection: DN 5 2 inch Pressure rating for pipe connection: PN 25 Flange rating inlet: 3 lb Flange size for motor: FF3 Electrical data: Motor standard: IEC Motor type: 16LB IE Efficiency class: IE3 Rated power - P2: 18.5 kw Power (P2) required by pump: 18.5 kw Mains frequency: 5 Hz Rated voltage: 3 x 38-48 V Rated current: 37,-31, A Cos phi - power factor:,91-,88 Rated speed: 48-354 rpm Efficiency: IE3 92,4% Motor efficiency at full load: 92.4 % Number of poles: 2 Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F Others: Minimum efficiency index, MEI :.7 Net weight: 223 kg Gross weight: 274 kg Shipping volume:.82 m³ Printed from Grundfos Product Centre [218.2.43]
96514555 CRNE 15-12 5 Hz H [m] CRNE 15-12, 3*44 V eta [%] 26 24 1 % 22 2 9 % 1 18 9 16 8 % 8 14 7 12 7 % 6 1 8 6 % 5 4 6 5 % 3 4 4 % 2 2 25 % 1 2 4 6 8 1 12 14 16 18 2 22 24 26 28 P [kw] Q [m³/h] NPSH [m] 2 P1 (motor+freq.converter) 2 15 P2 15 1 1 5 5 Printed from Grundfos Product Centre [218.2.43]
12.5 x13.5 4 13 65 1 X G 1/2 x21.8 18 8 G 1/2 38 314 2 3 215 248 35 Description General information: Value Product name: CRNE 15-12 A-FGJ-G-V-HQQV Product No: 96514555 EAN number: 5739678515 Technical: Speed for pump data: 354 rpm Rated flow: 2.5 m³/h Rated head: 197.9 m Stages: 12 Impellers: 12 Low NPSH: N Pump orientation: Vertical Shaft seal arrangement: Single Code for shaft seal: HQQV Approvals on nameplate: CE, EAC Curve tolerance: ISO996:212 3B Pump version: A Model: A Materials: Base: Impeller: Stainless steel EN 1.448 AISI 316 Stainless steel EN 1.441 AISI 316 G V SIC Material code: Code for rubber: Bearing: Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 25 bar Max pressure at stated temp: 25 bar / 9 C 25 bar / -2 C Type of connection: DIN / ANSI / JIS Connect code: FGJ Size of inlet connection: DN 5 2 inch Size of outlet connection: DN 5 2 inch Pressure rating for pipe connection: PN 25 Flange rating inlet: 3 lb Flange size for motor: FF3 Liquid: Pumped liquid: Water Liquid temperature range: -2.. 9 C Liquid temperature during operation: 2 C Density: 998.2 kg/m³ Electrical data: Motor standard: IEC Motor type: 16LB IE Efficiency class: IE3 Rated power - P2: 18.5 kw Power (P2) required by pump: 18.5 kw Mains frequency: 5 Hz Rated voltage: 3 x 38-48 V Rated current: 37,-31, A Cos phi - power factor:,91-,88 Rated speed: 48-354 rpm Efficiency: IE3 92,4% Motor efficiency at full load: 92.4 % Number of poles: 2 Enclosure class (IEC 34-5): IP55 Insulation class (IEC 85): F H [m] 26 24 22 2 18 16 14 12 1 8 6 4 2 1 % 9 % 8 % 7 % 6 % 5 % 4 % 25 % CRNE 15-12, 3*44 V 5 1 15 2 25 P [kw] 2 15 1 5 515 992 9 35 38 G 1/2 G 1/2 1 X G 1/2 Group 2 NC C2 NO NC C1 NO L1 L2 L3 2: Pt1 B 19: Pt1 B 18: Pt1 A 17: Pt1 A 16: GND (frame) 15: 24V 14: Sensor input2 13: GND 12: Analog output 11: Digital input 4 1: Digital input 3 1: Digital input 9: GND (frame) 8: +24V 7: Sensor input B: RS-485B Y: Screen A: RS-485A 6: GND (frame) 5: +1V 4: Setpoint input 3: GND (frame) 2: Start/stop 314 8 x 18 x 21.8 26 13 65 2 12.5 3 215 Group 3 Group 1 Q [m³/h] 9 8 7 6 5 4 3 2 1 eta [%] 1 15 1 5 NPSH [m] 2 P1 (motor+freq.converter) 248 127 165 P2 4 x 13.5 Printed from Grundfos Product Centre [218.2.43]
Description Value Motor protec: YES Motor No: 859126 Controls: Function Module: ADVANCED I/O Frequency converter: Built-in Pressure sensor: N Others: Minimum efficiency index, MEI :.7 Net weight: 223 kg Gross weight: 274 kg Shipping volume:.82 m³ Printed from Grundfos Product Centre [218.2.43]
96514555 CRNE 15-12 5 Hz cos phi eta CRNE15-12 + 16LB 18.5 kw 3*44 V, 5 Hz I [A] eta cos phi.8 4 I.6 3.4 2.2 1. 2 4 6 8 1 12 14 16 18 2 n [rpm] P2 [kw] P1 [kw] n 3 3 P1 (motor+freq.converter) 2 2 1 1 Printed from Grundfos Product Centre [218.2.43] n = 1 %
96514555 CRNE 15-12 5 Hz 35 G 1/2 G 1/2 8 x 18 x 21.8 1 X G 1/2 13 65 2 12.5 3 215 248 4 x 13.5 9 992 515 26 127 165 38 314 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos Product Centre [218.2.43]
96514555 CRNE 15-12 5 Hz Group 2 NC C2 NO NC C1 NO L1 L2 L3 Group 3 2: Pt1 B 19: Pt1 B 18: Pt1 A 17: Pt1 A 16: GND (frame) 15: 24V 14: Sensor input2 13: GND 12: Analog output 11: Digital input 4 1: Digital input 3 1: Digital input 9: GND (frame) 8: +24V 7: Sensor input B: RS-485B Y: Screen A: RS-485A Group 1 6: GND (frame) 5: +1V 4: Setpoint input 3: GND (frame) 2: Start/stop Note! All units are in [mm] unless others are stated. Printed from Grundfos Product Centre [218.2.43]
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date. All information is copyright Grundfos. info@lenntech.com www.lenntech.com tel. +31-15-261.9. fax. +31-15-261.62.89