1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Banding: Plastic foil 4. Core insulation: Mechanically high-quality PVC mixture 5. Conductor: Conductor consisting of bare copper wires For detailed overview please see design table Cable structure Conductor Conductor consisting of bare copper wires (according to DIN EN 60228). Core insulation Mechanically high-quality PVC mixture. Overall shield Braiding made of tinned copper wires. Coverage approx. 60 % optical Outer jacket Low-adhesion PVC mixture, adapted to suit the requirements in e-chains. Colour: Pastel orange (similar to RAL 2003) Printing: black 00000 m * igus chainflex M CF886.--.--j ----k 600/1000V E310776 cяuus AWM Style 10107 VW-1 AWM I/II A/B 80 C 600V FT1 EAC/CTP CE RoHS-II conform www.igus.de +++ chainflex cable works +++ * Length printing: Not calibrated. Only intended as an orientation aid. j / k Cable identification according to Part No. (see technical table). Example:... chainflex... CF886.15.04... (4G1.5)C... 600/1000V... 1 / 5
Dynamic information Bend radius e-chain linear minimum 15 x d flexible minimum 12 x d fixed minimum 8 x d Temperature e-chain linear +5 C up to +70 C flexible -5 C up to +70 C (following DIN EN 60811-504) fixed -15 C up to +70 C (following DIN EN 50305) v max. unsupported 3 m/s a max. 20 m/s² Travel distance Unsupported travel distances up to 10 m, Class 1 These values are based on specific applications or tests. They do not represent the limit of what is technically feasible. d service life according to guarantee conditions Double strokes 1 million 3 million 5 million Temperature, from/to [ C] R min. [factor x d] R min. [factor x d] R min. [factor x d] +5/+15 17.5 18.5 19.5 +15/+60 15 16 17 +60/+70 17.5 18.5 19.5 Minimum guaranteed service life of the cable under the specified conditions. The installation of the cable is recommended within the middle temperature range. Electrical information Nominal voltage 600/1000 V (following DIN VDE 0298-3) Testing voltage 4000 V (following DIN EN 50395) 2 / 5
Properties and approvals Flame retardant According to IEC 60332-1-2, CEI 20-35, FT1, VW-1 Silicone-free Free from silicone which can affect paint adhesion (following PV 3.10.7 status 1992) UL/CSA Style 10107, 600 V, 80 C NFPA Following NFPA 79-2012, chapter 12.9 EAC Certificate No. RU C-DE.ME77.B.01561 (TR ZU) CTP Certificate No. C-DE.PB49.B.00450 (Fire protection) Lead-free Following 2011/65/EC (RoHS-II) CE Following 2014/35/EU Typical lab test setup for this cable series Test bend radius R approx. 75-225 mm Test travel S approx. 1-15 m Test duration minimum 2-4 million double strokes Test speed approx. 0.5-2 m / s Test acceleration approx. 0.5-1.5 m / s² 3 / 5
Typical application areas For flexing applications, Class 3 Especially for unsupported travels, Class 1 Without influence of oil, Class 1 No torsion, Class 1 Preferably indoor applications Wood/stone processing, Packaging industry, supply systems, Handling, adjusting equipment 4 / 5
Technical tables: Mechanical information Part No. Number of cores and conductor nominal cross section Outer diameter (d) max. Copper index Weight [mm²] [mm] [kg/km] [kg/km] CF886.160.01 11) (1x16)C 11.5 180 256 CF886.250.01 11) (1x25)C 13.0 271 361 CF886.350.01 11) (1x35)C 15.5 382 521 CF886.500.01 11) (1x50)C 17.5 535 692 CF886.700.01 11) (1x70)C 19.5 737 917 CF886.950.01 11) (1x95)C 21.0 977 1159 11) Phase-out model Note: The given outer diameters are maximum values and may tend toward lower tolerance limits. G = with green-yellow earth core x = without earth core Electrical information Conductor nominal cross section Maximum conductor resistance at 20 C (following DIN EN 50289-1-2) [mm²] [Ω/km] [A] 16 1.21 82 25 0.78 108 35 0.56 135 50 0.39 168 70 0.28 207 95 0.21 250 Maximum current rating at 30 C (following DIN VDE 0298-4) The final maximum current rating depends among other things on the ambient conditions, the type of the installation and the number of loaded cores. 5 / 5