The All-New Kverneland 3336 MT New Innovative Suspension Concept with Hydraulic Adjustment of Overlap
2
Adjust on the go new hydraulic adjustment of overlap allows you to constantly optimize overlap and productivity Prepare Yourself for a New Mowing Experience. The all-new Kverneland 3336 MT, 3.60m mounted mower conditioner has taken mower suspension to the next level, lifting accuracy and productivity to new heights. The new suspension concept delivers constant ground pressure and hydraulic adjustment of overlap. Constantly being able to adapt instantly to changing field conditions on-the-go, finetuning the overlap in a matter of seconds, and just continue mowing is key. The 3336 MT will allow you to do all this with the new concept for hydraulic adjustment of overlap. To easily compensate for changing field conditions, the adjustable overlap is designed as a telescopic arm, directly into the suspension. This enables you to easily increase the overlap on the combination, when opening up fields or working in odd shaped plots or hilly conditions and reduce overlap when doing straight passes - always maximizing your capacity and productivity, without compromising cutting quality. Adjusting the overlap is done hydraulically from the tractor cab, and the chosen overlap is easily registered from the scale on the suspension arm. 3
Efficient Grass Management Starts Here... SemiSwing steel tine conditioner. Easy to read scale for overlap adjustment. Range of 400mm hydraulic on-the-go adjustment of overlap. The suspension geometry ensures constant ground pressure across the complete 700mm working range and when using the 400mm range hydraulic SideShift. Easy mounting and adjusting - Easy levelling of suspension arm, to counter any sideways tilt on tractor. 4
NonStop BreakAway - up and back - across full working width. Easy setting of conditioner plate with extra space for extremely intensive crop conditions. Integrated parking for vertical storage. Swath plates are easily slided away when wide spreading - no need to dismount them. Suspension concept with 4 suspension arms for accurate tracking. Hydraulic setting of ground pressure set from the tractor seat. Output and Performance at a New Level - 6.7m effective working width when used in a front-rear combination. 5
6 This is the Next Generation Suspension Concept
30 Vertical working range of 700mm. Transverse working range of 30. New Suspension Concept The 3336 MT suspension concept is a next-level development of the already known Kverneland suspension concept, known for its accuracy. The mowing unit is pulled by four suspension arms that allow the mowing unit to float independently over the field, and adjust accurately to ground contours. Ground pressure is set easily from the tractor seat, hydraulically and with an easy to read pressure scale on the mower for clear guidance. And that s not all. The suspension also provides the 3336 MT with NonStop BreakAway protection across the full working width, with no limiting factor on the left hand side of the mower, giving the driver true peace of mind during operation. Ground Pressure Remains Constant During mowing operation the carrying arm always remains even to the ground, giving the mowing unit the freedom to instantly compensate and float across uneven ground contours. More importantly this provides the mower with constant ground pressure, exactly as when going up and down or adjusting sideways to field contours as set by the user. The advantages are obvious, as it leads to less damage and faster regrowth from the stubble and minimum dirt into the crop. Up to 10% higher Output Always Optimized Overlap With Hydraulic Adjustment of Overlap 7
Efficient Transport Adds to a Productive Day Vertical transport has proven to the be the trend for mounted mowers, but the challenge with larger mower conditioners is typically that weight is centred on one side of the tractor. The complete weight of the 3336 MT is spread evenly on both rear tires, with a 50/50% weight balance. This means the tractor is not sliding to one side during transport, providing extremely stable running characteristics of tractor and mower during transport. The mower folds hydraulically for transport and the telescopic frame arm moves to lowest overlap position, to reach a transport height of only 3.60m. Optionally the right hand protection guard hydraulically folds into transport position. For vertical storage when not in use, the 3336 MT is designed with an integrated storage foot, requiring a minimum of space during storage. The All-New Kverneland 3336 MT, The Full Feature Mower: Working Width: 3.60m Weight: 1300kg Transport Height: 3.60m 4-Arm suspension concept. SemiSwing steel tine conditioner. NonStop BreakAway device. Vertical transport position. Integrated vertical parking. Hydraulically adjustable ground pressure control. FlipOver wide spreading (optional). 400mm hydraulically adjustable SideShift. Hydraulic levelling of suspension arm when mounted on tractor. www.kverneland.com Information provided in this brochure is made for general information purposes only and for worldwide circulation. Inaccuracies, errors or omissions may occur and the information may thus not constitute basis for any legal claim against Kverneland Group. Availability of models, specifications and optional equipment may differ from country to country. Please consult your local dealer. Kverneland Group reserves the right at any time to make changes to the design or specifications shown or described, to add or remove features, without any notice or obligations. Safety devices may have been removed from the machines for illustration purposes only, in order to better present functions of the machines. To avoid risk of injury, safety devices must never be removed. If removal of safety devices is necessary, e.g. for maintenance purposes, please contact proper assistance or supervision of a technical assistant. Kverneland Group Kerteminde AS. Krogager 11.2015