All our lifts can be adjusted to fit the following European Safety standards for the construction and installation of lifts: EN 81-70: 2004 on accessibility to lifts for persons including persons with disability. EN 81-71: 2005 on vandal-resistant lifts. EN 81-72: 2004 on firefighters' lifts. EN 81-73: 2005 on behaviour of lifts in the event of fire. In addition, all our lifts comply with the following standards: EN 81-58 on doors. EN 81-28 on remote alarm. Series 500 Series 700 All information within this catalogue is property of IMEM Lifts. Duplicating the catalogue or parts of it is only permitted with the written approval of IMEM Lifts. All photos, logos and other graphical elements are property of IMEM Lifts. The publication or copying is strictly forbidden.
Look to the Future The expertise of our team and our strategic focus as an independent and flexible lift manufacturer are the cornerstones of our progress and development. IMEM s wide range of drives and car sizes make our lifts suitable for almost all environments where fast and efficient installations are a must. IMEM offers a complete range of lifts being able to solve the most demanding needs: Passenger lifts: Gearless Machine room less lifts. Overhead traction lifts, or machine room below traction lifts. Hydraulic. Goods/Passenger lifts: Machine room less lifts up to 3 tonnes. Overhead traction lifts. Hydraulic lifts: direct and indirect acting passenger and goods lifts as well as vehicle lifts. Bespoke and special lifts: Panoramic Lifts. Reduced and difficult existing shaft sizes. Inclined lifts. All lift components such as car and counterweight slings are epoxy coated -RAL 7032-. Every lift delivery includes a CD with general arrangement drawings, wiring diagrams, installation procedure, certificates etc. High quality products, permanent innovation and excellent customer service are the pillars which have supported IMEM s development. Since its foundation back in 1969, IMEM has become a specialist in the design and development of lifts.
Series 300 C M Y CM MY CY CMY K
Car design The car and lift design complies on request with all applicable UK and EEC rules and regulations including the Disability Discrimination Act. We follow the safety rules for the construction and installation of lifts Particular applications for passenger and goodspassenger lifts- Part 70: accessibility to passenger lifts including persons with disability. We offer four standardised finish levels, but can meet any decorative or site requirement. 200 series cars are made of and decorated in skin plate. Due to its attractive & actual colour mix and functionality it adapts itself to houses and apartments and merges with the environment in a homogenous and harmonious form. 300 series: The Series 300 offers laminate cabins which provide a perfect mix of quality and functionality. It is the ideal selection for its whole concept, its structure and its design. 700 and 500 series: In those occasions where the environment requires the finest elegance and luxury in every detail, this range fulfils the highest customer s expectations. Panoramic and other bespoke lifts. All our cars are synonymous to our high level of craftsmanship and attention to detail. Our range of high quality finishes includes: rubber, vinyl, granite, aluminium chequer plate or marble flooring, PVC covered, stainless steel or wooden handrails and an attractive selection of ceiling plates.
Series Stainless Steel C M Y CM MY CY CMY K
Heavy usage Heavy duty cargo/passenger lifts Walls: incorporating a range of reinforced steel finishes. 5WL/Elephant Skin/Brushed/Linen Stainless steel. Galvanised. Epoxy coated steel. Floors: heavy duty vinyl, steel or aluminium chequer plate. Landing Push stations: call and send push buttons or normal automatic push buttons. Skirting: Stainless steel, chequer plate etc Car Protection: Wooden or stainless steel buffer rails and kick plates. Stainless steel handrails. Push button finish: a wide range of landing signalisation is available including brushed, painted or mirror polished stainless steels. Landing and car doors: fully automatic heavy duty doors with the best performance results and records in the market according to our customers. Manual shutter gates are available upon request. Goods lifts can be split primarily into four categories Machine room less lifts, overhead traction lifts, Hydraulic direct and indirect acting lifts - IMEM Lifts has the in-house expertise to meet the needs of each and every application.
Series Fire-fighting C M Y CM MY CY CMY K
Fire Fighter Lifts BS EN 81-72 Particular applications for passenger and goods passenger lifts. Firefighters lifts. Many buildings and environments require our lifts to be provided with additional protection controls and signals. We ensure the protection and equipment against water and follow the regulation to ease the rescue from inside or outside the lift car in case of fire: emergency trapdoors, accessible ladders, priority recall for the firefighter lift and use of the lift under firefighters control. Safety requirements and/or protective measures: Fundamental firefighters lift requirements. Protection of electrical equipment against water. Rescue of trapped firefighters in the lift car. Car doors and landing doors. Lift machine and associated equipment. Control Systems: phase 1 priority recall for the firefighters lift. Control Systems: phase 2 Use of the lift under firefighters control. Fire service communication system. We ensure the protection of equipment against water and follow the regulation to ease the rescue from inside or outside the lift car in case of fire.
Car Walls Series 200 (Skinplate) Ref. 280 N Ref. 280 A Ref. 280 R Ref. 280 V Ref. 233 Ref. 255 Ref. 280 AM Ref. 290 M Ref. 222 Ref. 244 Ref. 290 C Series 300 (Laminates) Series 500 (Laminates) Ref. 2303 Ref. 3830 Ref. 3110 Ref. 3112 Ref. 1137 Ref. 5060 Series 700 (Laminates) Series Stainless Steels Ref. 7101 Ref. 7061 Ref. Inox 304 Ref. Elephant Skin Ref. SWL Ref. Linen Finish Ceilings Ref. 401 Ref. 403 Ref. 407 Ref. 411 Ref. 409 Ref. 405 Floors Stone Ref. S30 MB Ref. S27 MB Ref. S25 MB Ref. S29 MB Ref. S28 MB Ref. S26 MB Rubber and PVC Ref. S32 GN Ref. S42 GG Ref. S62 GG Ref. S52 GN Ref. Aluminium Chequered plate Ref. Steel Plate
Displays LCD 7 SEGMENTS DOT MATRIX Push Buttons, Inductive Loop Autodialler; Lantern and Gong STANDARD IP54 EN81-70 Controller The new lift control Altamira is based on low power consumption microprocessor technology. Our controller uses state of the art communication devices complying with the EN81-28 regulation. We offer monitoring facilities as well as a diagnostic tool for installation and service. All electrical equipment undergoes a full quality test in our factory. IMEM Lifts reserves the right to change specifications, options and colours in this catalogue. All images in this brochure are for description purposes only. Colours and materials might not be exactly the same as the actual ones.
www.imem.com EXPORT DEPARTMENT Peñacastillo-Adarzo, 167 B. - 39011 Santander. Spain Telf.: +34 942 34 60 20 Fax: +34 942 35 53 64 e-mail: comex@imem.com