Handlebar Cockpit Lighting from page 208

Photo: Dirk Schäfer 1 2 Handlebar Cockpit Lighting from page 208 Seat from page 213 3 Suspension from page 215 4 Protection from page 217 5 Foot pegs / hand gear from page 220 6 7 Tank bags Tail rack bags from page 224 Case systems from page 227 206

BMW R 850 GS R 1100 GS R 1150 GS 1 6 2 7 3 4 5 207

MADE IN THE EU (GERMANY) Headlight cover BMW R 1150 GS / Adventure Optimum Protection of the lamps against flying stones Durable, non-breakable, shatter- Proof, nearly invisible headlight cover; vehicle design remains unchanged; existing fairing bolts are used for fitting. Mounting kit includes long screws and spacers for easy installation. The headlight cover has not been type-approved by the German TÜV and must not be used on public roads. 040-0330 Polycarbonat (clear plastic) 040-0331 Steel grille Headlight cover BMW R 1100 GS / R 850 GS Optimum Protection for the fragile lamp glass against flying stones. Existing fairing bolts are used for fitting. Mounting kit includes long screws and spacers for easy installation. Fits standard headlights and our twin headlights. Cannot be used in conjunction with certain accessory windscreens. The headlight cover has not been type approved by the German TÜV and must not be used on public roads. 040-0383 Steel grille Photo: Nick Plumb, Argentina 208

BMW 040-7301 040-7031 Touratech hand Protectors BMW R 850 GS / R 1100 GS / R 1150 GS / ADV Optimum lever Protection (brake and clutch levers) Optimum Protection for your hands Robust even at high speeds Good wind deflection (with spoiler) Elegant design enhances the enduro looks Many colours available Colours of hand Protector and spoiler may be different Hand Protector colours: black (1), yellow (2,) blue(3), red (4), white (5) When ordering, please substitute the X on the end of the order number for the number in brackets. BMW R 1100 / 850 GS 040-702X with series handlebar 040-662X with aluminum handlebar BMW R 1150 GS / Adventure 040-703X with series handlebar 040-663X with aluminum handlebar Spoiler for Touratech Hand Protectors 040-730X R 850 GS R 1100 GS R 1150 GS Spoiler for original BMW hand Protectors R 1150 GS / ADV Very useful accessories for the GS-biker. Optimal hand Protection for the original Protectors. Very useful and pleasant in rain, snow, hail and cold. Easy to fix by drilling two small holes through the Protector. The spoilers are made out of resistant and light synthetic. Colour: black Spoiler for orginal Protectors 040-1701 black 209

MADE IN THE EU (GERMANY) Handlebar risers BMW R 850 / 1100 / 1150 GS / Adventure For an upright and relaxed riding position Less strain on shoulders and wrists For sports riding: Better standing, less exhaustive riding Better handling Black powder coating Handlebars 25 mm higher 040-0265 Special screw-set 2 x M8 x 65 with M5 thread. Special bolts with internal M5 thread. Two kits required to install handlebar risers (040-0265) with BMW original Fog lamp switch on BMW R 1150 GS Adventure. 040-0272 Hard part LA - steering stop BMW R 850 / 1100 / 1150 GS / Adventure The steering stop of the GS can break from a heavy fall: In case of extreme stress on the handlebars or front wheel, the steering stop can break off, sometimes damaging the frame stop as well and the fork legs. The fork may also damage the tank leaving ugly dents. The 1150 brake line can be caught between the fork leg and telelver and is likely to get damaged. If so, forget about riding home. The hard part LA for R 1150 GS comes with a brake line support, too. Made of aluminium and durable Delrin Additional rubber buffers Easy to mount BMW R 1150 GS 040-1303 yellow BMW R 1150 GS Adventure 040-1307 yellow BMW R 850 / 1100 GS 040-1302 yellow Dual headlight BMW R 850 GS / R 1100 GS DE dipped headlight and DE main beam light. Stop making compromises. Stop using these bus-like headlights. A brilliant combination of a stylish look, high quality and high-tech. DE dipped headlight for optimum illumination. Tested on our ReVamp, now available as a retrofit for the R 850 GS / R 1100 GS. Can be fitted together with the additional Xenon / Fog headlights. No german TUV Type approval required: construction type approval 2 x 55 Watt H7-socket 040-1214 210

BMW Kaoko Cruise Control, mechanical cruise control BMW R 850 GS / R 1100 GS / R 1150 GS / ADV The original by the South African inventor! The cruise control replaces the original handlebar end weights. The anti-slip knurled screw secures the accelerator in position. This significantly reduces the strain on the right hand during long journeys. Thanks to the continuous adjustment, the accelerator can also be fixed to decelerate very gently - leaving you enough time to take your hand off the handlebar for a moment without immediately losing throttle. Despite that, the motorbike decelerates in a gentle and controlled way. This item is illegal in road traffic in Germany and could be dangerous if used incorrectly. We are unable to accept any responsibility for it. Used at the owner s/rider s own risk. 330-0001 Decal set fork BMW R 1150 GS / ADV Absolutely strong, thick film Protects the fork against stones and other types of damage. Black film with white print. Very easy to apply - strong adhesive. 100-0504 (for both sides) R 850 GS R 1100 GS R 1150 GS Hard part GS Neoprene fork Protectors These fork Protectors give utmost Protection to the stanchion of the telelever forks. Forget about damage caused by flying stones, dust or mud. Our new fork Protectors are made of soft neoprene and mount without tools. They are wrapped around the sensitive parts of the fork, fastened with Velcro and fixed. 040-1304 211

MADE IN THE EU (GERMANY) 41 Litre Tank BMW R 850 GS / R 1100 GS / R 1150 GS Our tried and true 41 Liter fuel tank for the R 850/ 1100/1150 GS. Elkamet has manufactured our tank since 2000 and it is perhaps the toughest tank on the market. It is made of polyamide nylon, a material developed for it s impact resilience, commonly used for modern automotive bumpers. Capacity is 41L but with the original amount of 22L of fuel it adds only 5kg to the motorcycle, but the fuel rides LOWER on the motorcycle, increasing stability most of the time, and you don t have to keep it full. But full, you can ride 700 kms (400 mi) or more! This true long distance / touring tank gives you OPTIONS on the road. You can choose your destination with little regard to availability of fuel. It is supplied unpainted, and it fits the original mounting. The package includes all mounting hardware. The original BMW filler cap and pump assembly are used. The RID and fuel warning lamp work with the large tank. A German TÜV Type ApProval is included. 100-0010 212 Tank guard BMW R 1150 GS Adventure When the R 1150 GS Adventure is used as it was designed, minor bumps or falls can leave unsightly scrapes on the extended lobes of the steel tank. Textured black plastic Protectors withstand moderate hits, preventing scratches and minor dents. The Protection is contoured perfectly to the tank and compliments the Adventure look. Color: black 040-1318

BMW Single-piece comfort bench seat BMW R 1150 GS Adventure An upgrade you can feel for the cult motorcycle! The R 1200 GS Adventure with the air-cooled engine has meanwhile become a cult motorcycle and attracts more and more enthusiasts. However, the worn seat bench Provides little room for joy and has never been one of the most comfortable examples of its kind. This feeling is certainly experienced by all those who enjoy travelling in twos, as the passenger seat is very uncomfortable over longer distances. The Touratech seat bench makes all seat Problems a thing of the past! Anatomically designed, and fitted with high-strength foam and a hardwearing cover, our seat benches meet all the requirements for endless tours by bike! IN THE EU - (GERMANY) The high-quality, multi-layer seat cover is equipped with a permanent Freshtouch surface coating. This significantly reduces the surface temperature. 041-5912 low 041-5913 standard 041-5914 high R 850 GS R 1100 GS R 1150 GS Comfort seat BMW R 850 GS, R 1100 GS, R 1150 GS (not Adventure) Feel the difference! We offer the better seat for the R850GS, R 1100 GS and R 1150 GS (not Adventure): anatomically optimised, in a range of heights, with a high-strength foam core and non-slip, bi-elastic, waterproof sand effect covering material. The outstanding characteristics of these comfort seats exceed even new, original seats and put the enjoyment back into riding the GS! 041-5900 Comfort seat for rider low - 3 cm 041-5901 Comfort seat for rider standard 041-5902 Comfort seat for rider high + 3 cm 041-5907 Comfort seat for pillion standard IN THE EU - (GERMANY) Comfort seat BREATHABLE The breathable seat offers tremendous advantages over the standard one, especially at high temperatures. It enables the air to circulate inside the seat, which efficiently eliminates perspiration in the seat area. This in turn helps to prevent the underclothing from sticking and wrinkling. The innovative padding has a special recess which significantly increases the seating comfort, and the hard-wearing outer material copes easily with even the toughest conditions. 041-5904 Comfort seat for rider standard 041-5905 Comfort seat for rider high + 3 cm 041-5910 Comfort seat for pillion standard 213

MADE IN THE EU (GERMANY) REMUS REMUS Revolution rear silencer, aluminium BMW R 1150 GS with ABE Weight: 3,4 kg 040-3301 REMUS Revolution rear silencer, carbon BMW R 1150 GS with ABE Weight: 3,0 kg 040-3302 Illustration similar Y- piece replaces front silencer w/o ABE BMW R 1150 GS The second Problem that exists with the original exhaust is that you cannot use it on long distance travels as you don t get unleaded fuel wherever you go. The Remus exhaust can be used with or without catalytic converter. The front silencer can be exchanged so that you can decide whether you want to fit a catalytic converter (KAT) or not. The new R 1150 GS features a front silencer separated from the rear silencer. Thus you can either replace the front silencer (w. or w/o catalytic converter) or the rear silencer (for a better sound and look). All parts are interchangable. 040-3202 Set Revolution SD silencer Alu from Remus and connection pipe 040-3306 214

BMW ACE Touratech ACE Suspension ACE = Actively Controlled Electronic Suspension Devised and developed by the Tractive team, the inventors of ESA suspension systems. The Touratech Suspension ACE system responds at lightning speed to extreme forces such as emergency braking and powerful acceleration. When the bike is loaded for touring and/or carrying a pillion passenger, the ride characteristics can vary greatly and become very tiring. The Touratech Suspension ACE system offers the motorcyclist a high degree of active ride safety and touring comfort. The bike s wheels stay where they should be: on the road. R 850 GS R 1100 GS R 1150 GS In brief: On the BMW R 1150 GS models presented here, while sitting on the motorbike the rider can conveniently and effectively adjust the suspension via the remote control unit to suit the load and road conditions. The Electric Preload Adjuster (EPA) equalises the load on the motorcycle ( balance ). The Dynamic Damping Adjustment (DDA) can be adjusted from comfort to hard sports settings. The Actively Controlled Electronic Suspension (ACE) control unit detects positive or negative acceleration (braking) and actively adjusts the damping as required via the DDA valve. Detailed information on Touratech Suspension and available variants can be found starting on page 680! BMW Type: EXPLORE-SET (front & rear) R 1150 GS (2000-2003) 040-5865 R 1150 GS Adventure 040-5870 215

MADE IN THE EU (GERMANY) Touratech Suspension BMW R 1150 / 1100 GS / ADV Made for adventure and touring bikes Built for hard use and heavy loads Supplied with special Touratech setup for each respective motorbike Top performance on and offroad Highest quality materials for long life Uniquely solid Touratech hydraulic spring preload with 50% greater adjustment range For weekend trips, riding with a passenger and/or a long tour with lots of luggage Precise, high-performance damping even with very high damping frequency (bad roads, dirt tracks) Detailed information on Touratech suspension and available variants can be found starting on page 680! BMW Typ: Level 1 Level 2 R 1100 GS (rear) 040-5860 040-5880 R 1100 GS (front) 040-5875 R1150 GS (rear) 040-5862 040-5882 R1150 GS (front) 040-5877 R 1150 GS Adv. (rear) 041-5860 041-5862 R 1150 GS Adv. (front) 041-5875 216

Aluminium cylinder guard BMW R 850 GS / 1100 GS / 1150 GS / ADV + BMW R 850 R / R 1100 R / R 1150 R It has Proved to be very reliable when riding thousands of kilometres on off-road tracks. The 4 mm strong aluminium guard buckles in the event of a fall and thus takes up much of the impact energy. The cylinder is well protected against scratches and damage. In addition to this, it further enhances the Boxer look. Highly recommended when riding off-road. 051-0508 Crashbars BMW R 1150 GS For enduro riders falls are part of the game. The rider is well Protected, but what about his bike? We have developed crashbars for the R 850 GS/R 1100 GS/R 1150 GS that really Protect the motorbike. Rugged mounts attach to the bike in 6 places. Two crossbars take the lateral forces. Steel, available in black only. The crashbars have a stepped joint below the crossbar. To carry out any maintenance work on the motorcycle, only two screws have to be removed. Removing the entire crashbar is not necessary. 051-0509 BMW R 850 GS R 1100 GS R 1150 GS 217

MADE IN THE EU (GERMANY) Sump guard BMW R 1150 GS / R 1100 GS / R 850 GS Our sump guard Protects the centre stand and the front silencer against damage from stones or other objects Protruding from the ground when riding off road. As the sump guard plate is bent upwards, it prevents sand and dirt from penetrating the space between the engine and the gearbox, so it Protects the crankshaft seal from dirt and increases its life considerably. Our sump guard mounts to the centre stand with four clamps. The rubber elements on the clamps Provide vibration isolation. The plate is CNC machined from 4 mm aluminum. The engine guard extension was deliberately manufactured without holes or cut outs to maintain the motorcycle s slip on rocky tracks when riding off-road. 040-1252 BMW R 1150 GS (Aluminium) 040-1255 Adventure (Aluminium) Oil filler cap with hexagonal screw BMW R 850 /1100 / 1150 GS also R 1100 RT Replaces the original oil filler plug on the left cylinder. Protects against theft and vandalism as this plug can only be opened using the 7mm allen key (Provided). CNC turned aluminium. 040-0282 Locking Oil Filler Cap for all BMW boxer engines (R259 and R21) Stolen oil filler caps are a thing of the past. No special tool required: easy to operate using a small unobtrusive key. Fits all 4V boxer engines including dual plug. High-quality workmanship High-quality brand lock Can be keyed to match our integral pannier locks 040-0292 218

BMW Hard Part GV BMW R 1100 GS The BMW R 1100 GS has several weak points which prevent enduro riders from riding the bike under extreme off- road conditions. Here is the solution. Problems occur when the workload on the rear frame is too high, i.e. After a jump or when riding with heavy luggage. The rear frame mount on the gear-box casing simply cracks. Another weak point is the footpeg mount. Under extreme stress it may break the gearbox casing; i.e. when dropping the motorbike onto the footpegs or after a fall. When mounting our parts we refer to these as hard parts frame problems will belong to the past: Material: 4 mm steel Laser- cut Galvanised Double plastic-coating (yellow) Mounting hardware provided And enduro enthusiasts will enjoy riding the BMW R 1100 GS again... 040-1301 yellow R 850 GS R 1100 GS R 1150 GS Ceramic Clutch Since the trip report about Mongolia and the BMW R 1100 GS Monstercow at the latest, you will know about the Problem: In the long run, the clutch of the R 850 GS/R 1100 GS/R 1150 GS does not stand the extreme stress of off-road or sports riding and can break down completely within a few seconds. Frequent acceleration and driving at high speed on narrow and steep mountain roads is like an endurance test for the clutch which starts getting hot quickly. Most long distance travellers riding one ofthe above models will be able to tell you, at least roughly, how to change the clutch or where you will find the next workshop. The ceramic clutch has been developed in Africa for use on Africa s extreme trails and for off-road trips. Since its introduction it has Proved to be reliable. The ceramic clutch is much more durable and can be used under more extreme conditions than the original clutch. Even when climbing uphill on narrow tarmac roads with heavy luggage the clutch will work perfectly. Until now, not a single clutch has broken down! 1.8 mm laser-cut stainless steel 8 ceramic friction plates (riveted) Racing technology Tried and tested in South Africa for many years and on tracks world-wide Clutch does not longer overheat under extreme conditions. Excellent workmanship and exacting tolerance It normally does not break during the LIFE OF A MOTORBIKE 040-0350 BMW R 1100 GS 040-0351 BMW R 1150 GS 219

MADE IN THE EU (GERMANY) Oil cooler guard BMW R 850 GS / R 1100 GS / R 1150 GS / Adventure Rugged aluminium guards Protect the delicate oil cooler on the BMW R 1100 GS/R 850 GS or BMW R 1150 GS 1.5 mm anodised aluminum Easy fitting, no bike modifications needed 040-0288 R 1150 GS / Adventure 040-0279 R 850 GS / R 1100 GS 040-0277 R 1150 GS / Adventure, black Height adjustable footpegs Now finally these extra-large, four way adjustable footpegs enable you position them according to your needs and to the driver s body height. Especially on long-distance trips, the lowest position improves riding comfort considerably as it enables a relaxed riding position. Footpegs BMW R 850 / 1100 / 1150 GS / Adventure 041-0631 Adjustable gear lever R 1150 GS / Adventure 041-0632 Footpeg and gear lever kit R 1150 GS / Adventure 041-0633 Long-distance, relocated front footpegs For anyone who wears touring boots on long journeys.the footpegs are fitting further forward thus Providing optimum distance between the touring boots and the brake lever or gear lever. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. Material: high-quality stainless steel 041-0625 Long-distance, relocated rear footpegs We have always wanted these footpegs for our longdistance journeys.everyone knows the Problem: If you are wearing enduro boots there is not enough space between them and the brake lever or gear lever. The long-distance footpegs are fitted further back thus Providing optimum space for enduro boots. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. Material: high-quality stainless steel 041-0626 220

BMW Studded pillion passenger footpegs For anyone who drives with a pillion passenger through difficult terrain. With the studded rear footpegs the pillion passenger has a firm grip too and does not risk falling off the bike when the going gets difficult. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. Material: high-quality stainless steel 044-0860 Brake lever extension You know how annoying it is to miss the brake lever. Our extension offers you a larger support surface and safe pressure on the brake lever. 040-0249 R 850/1100/1150 GS from 9/1997 R 850 GS R 1100 GS R 1150 GS WORKS long-distance foot pegs BMW R 850 / 1100 / 1150 GS / Adventure 52 mm wide and 4 mm thick stainless steel claw Profile that is kind to your boots Perfect combination of grip and self-cleaning With a more slender design for better ground clearance Significantly less susceptible to impacts Strengthened mounting point With a blasted surface and laser inscription for a superior finish 044-5315 044-5316 (low - 2 cm) 221

MADE IN THE EU (GERMANY) Mudguard flap BMW R 850 GS / 1100 GS / 1150 GS Efficient mudguard flap for rear wheel Protects against dirty back and soiled luggage Reinforces number plate Powder- coated aluminium (black) 040-0281 Luggage rack extension BMW R 850 GS / R 1100 GS / R 1150 GS 4 mm anodised aluminium 30 mm wider 80 mm longer Additional space for your luggage roll Many slots for fixing straps Compatible with our TVP tail rack bag 051-1100 LL tool compartment cover BMW R 850 GS / R 1100 GS / R 1150 GS Finally a replacement for the plastic tool compartment cover. Our design is made of anodised aluminium and is also lockable, so that nothing can go missingeven when riding alone with the single seat. 051-1110 Kick stand support extension BMW R 1150 GS The BMW stands much more firmly even on quite a soft surface with this kick stand support extension. Even if you park the motor bike in a meadow you do not always have to look for a small plank of wood or another base. This practical part is made of a combination of stainless steel laser parts and anodised aluminium. Quick and easy to fit. 040-3183 222

BMW Paralever guard BMW R 850 / 1100 / 1150 GS The paralever rod and the linkage on the rear wheel are very likely to be damaged by stones being thrown up from the ground. When riding off-road, these are parts that are located at a very low position and thus often touch the ground. The new paralever guard from Touratech Provides effective Protection for this piece of equipment. Can be fitted easily with no tools. Color: black 040-1309 Cover ABS sensor This small but extremely effective cover is available to Protect the ABS sensor against damage. Material: high-quality stainless steel. 040-1319 R 850 GS R 1100 GS R 1150 GS Fender cover Have you taken off the original fender? And now you have two horrible threads too many on your cardan? We have a solution for you! A dainty shield to cover the two threads (suitable for all 4V-GS models). 040-3190 Fender cover Diagnostic tool Duonix Bikescan-100 for BMW motorbikes The Bikescan-100 is small and powerful and therefore ideal for Professional control unit diagnostics on BMW motorbikes. This system covers the entire motorbike electronics and makes troubleshooting much easier for the user. The many special functions and settings can be carried out directly on the device without connecting the system to a computer or laptop. Ideal for travelling. 030-0105 223

MADE IN THE EU (GERMANY) IN THE EU - (GERMANY) Tank bag BMW R 850 GS / R 1100 GS / R 1150 GS / ADV The further development of our Proven tank bag for the BMW R11xx GS models now offers an additional reflective elastic strap on the side which can be used to hold e.g. your gloves during a short stop. Reinforcements in the side walls keep the tank bag absolutely in shape even when not full. The further details: Capacity approx. 18 litres, expandable to ap- Prox. 25 litres by opening the zipper Two new side pockets with 2-way zippers and optimised form. This prevents accidental actuation of the turn flashers or horn when turning the handlebar. Sturdy carrying handle Two straps supplied with the bag allow it to be used as a rucksack Map pocket (28 x 32 cm) attached to the bag by Velcro fasteners Attached to the tank by snap closures for quick removal during refuelling Optional rain cover available Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Made in Germany by KAHEDO Colour: black Size: (L x W x H): approx. 31 x 29 x 22/32 cm 055-1302 224

BMW Rain hood The rain hood for the Touratech tank bags. 055-0069 Handlebar bag Small, smart bag for all 22 mm handlebars. This will let you keep small items within a hand s reach. Particularly well suited for bandages or a patch kit. The bag is secured with a plastic clip and two Velcro straps. Colour: black. Volume: approx. 1l Dimensions (l x w x h): 8 x 37 x 5 cm 055-1230 R 850 GS R 1100 GS R 1150 GS Tail bank TVP BMW R 850 GS / R 1100 GS / R 1150 GS Versatile tail rack bag that fixes to the small luggage rack and offers extra storage capacity. Circular zip for even more capacity. The bag has a sponge rubber base and a reinforced interior. Two strong straps fasten the bag to the rack. From teflon-coated CORDURA, thus water-rejecting and insensitive to dirt simply HIGH TECH. Size (enlarged capacity): approx. 30 x 16 cm, 23 cm high Capacity: approx. 8.5 l 055-1204 225

MADE IN THE EU (GERMANY) IN THE EU - (GERMANY) Tail bag SEAT This versatile tail rack bag for the BMW offers 12 litres of carrying capacity. Tailor-made to the size of the tool box, the tail rack bag replaces the pillion seat and is fastened with two strong straps. The straps can be replaced and are fixed with two buckles. A circular zip expands the bag to 20 litres of capacity. The outside top zipped pocket takes all the oddments. There is an inside pocket, too. The rugged carrying handle turns the bag into an elegant piece of luggage. It comes supplied with two additional straps that can be clipped on the sewn on loops and convert the tail rack bag into a rucksack or shoulder bag. This tail bag R 850/1100/1150 GS replaces the pillion seat and has a strong rubber base for skid-proof attachment. Optional rain cover. Size: approx. 28 x 30 x 13 cm, expands to approx. 28 x 30 x 23 cm BMW R 850 GS / R 1100 GS / R 1150 GS 055-1203 Rain hood 055-1069 ZEGA Pro Topcase rack BMW R 1150 GS / R 1100 GS / ADV The special carrier for our ZEGA Pro Topcases. Made entirely of stainless steel and specifically designed for the BMW s attachment points, the Topcase rack is the perfect way to attach ZEGA Pro Topcases to your bike. The Topcase rack can be used on its own or in conjunction with our pannier system. The available Topcases appear on page 544. 040-5455 BMW R 1150 GS / R 1100 GS 041-5455 BMW R 1150 GS Adventure 226

BMW 98,0 cm ZEGA pannier system, premounted, frame stainless steel BMW R 850 GS / R 1100 GS / R 1150 GS / R1150 GS ADV The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the BMW R 1150 / 1100 / 850 GS. Including pillion foot peg adjustment. Pannier System with: stainless steel rack ZEGA Mundo 38/45 l 040-6135 ZEGA Pro 38/45 L 052-3181 ZEGA Pro AND-S 38/45 L 052-3182 ZEGA Pro AND-Black 38/45 L 052-3183 ZEGA Pro R 850 GS R 1100 GS R 1150 GS Pannier System with: stainless steel rack ZEGA Pro2-38/45 L 040-6035 ZEGA Pro2 - AND-S 38/45 L 040-6036 ZEGA Pro2 - AND-Black 38/45 L 040-6037 ZEGA Pro AND-S Complete information about the innovative aluminium case on page 508. ZEGA Pro AND-Black 227