INSTALL GUIDE OL-AL(RS)-CH-[OL-MDB-ALL]-EN DOCUMENT NUMBER 8 REVISION DATE 009 FIRMWARE OL-AL(RS)-CH-[OL-MDB-ALL] HARDWARE OL-MDB-ALL ACCESSORIES OL-LOADER (REQUIRED) OL-HRN-CH (REQUIRED) RF-0/0/0-EDP (OPTIONAL) NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work. U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 BEFORE INSTALLATION - Connect module to computer - Login to Weblink account - Flash firmware to module (module is not preloaded with firmware) - Use accessories accordingly (accessories are sold separately)
PAGE OF DOC.: #8 009 VEHICLE LIST - OF FEATURES MODEL YEAR DATA IMMOBILIZER BYPASS X LOCK START/STANDALONE MOD. PRIORITY UNLOCK DOOR LOCK DOOR UNLOCK ARM OEM ALARM DISARM OEM ALARM TRUNK/HATCH RELEASE DATA/MUX STARTER CTRL RAP SHUTDOWN CTRL WARNING 00 - or 00 / 00C 0-0 Aspen 0-0 or PT Cruiser 0-0 RAM JEEP DODGE CHRYSLER INSTALL TYPE MAKE I Install type & require a T-Harness (sold separately). Install type doesn't require a T-Harness. Sebring 0-0 or Avenger 08- or Caliber (with start wire) 0 Caliber 0- or Charger 0-0 Durango 0-0 or Magnum 0-0 Nitro 0- or Ram 00 0-08 or Ram 00 0-09 or Ram 00 0-09 or Ram 00 chassis cab 0-09 or Ram 00 chassis cab 08-0 or Ram 00 chassis cab 08-0 or Commander 0-0 Compass 0- or Grand Cherokee 0-0 Liberty 08- or Patriot 0- or Wrangler 0- or 00 chassis cab 0 or 00 chassis cab 0 or U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 BOX CONTENTS - OF BOX CONTENTS WHITE WHITE PIN BLACK PIN WHITE MODULE WHITE BLUE PROGRAMMING BUTTON 0 PIN BLACK PIN WHITE LED A B F C E D 0 9 8 BLACK PIN WHITE DATA CABLE PIN BLUE DATA CABLE BLACK DATA PORT (WEBLINK, RF, TELEMATIC) WEBLINK CABLE (required accessory sold separately) CH T-HARNESS (optional accessory sold separately) WEBLINK CABLE MODULE DATA PORT CH T-HARNESS COMPUTER USB PORT PIN BLACK CABLE U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 COMPATIBLE ACCESSORIES - OF RF KIT (accessories sold separately) OMEGA RF KIT AMPS V MODULE DATA PORT RED BLACK ANTENNA U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 TECHNICAL NOTE - OF PARKING LIGHT NOTE MODULE VEHICLE A B F DOORLOCK INVERTER DLPP C E DATA D WARNING MAX ma. BLUE RED (NC) GREEN CONNECT IF VEHICLE IS EQUIPPED WITH PARKING LIGHT 8 8 8 8A PARKING LIGHT 0 D/U + BLUE D/L + GREEN (NC) 0 AMPS V F 09 GREEN - PARKING LIGHT (-) OUTPUT OR CONNECT IF VEHICLE IS EQUIPPED WITH PARKING LIGHT (-) WARNING MAX ma. DOORLOCK INVERTER DLPP BLUE RED (NC) GREEN 8 8 8 8A PARKING LIGHT (-) 0 D/U + BLUE D/L + GREEN (NC) AMPS V U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR pin pin Pink/DkGreen C pin 00 0-0 Starter CHRYSLER PT Cruiser DODGE Caliber with start wire Charger Magnum 0-0 Starter 0 C pin Pink/LtBlue C pin Starter C pin Pink/DkGreen C pin 0-0 Starter C pin Pink/DkGreen C pin C pin Pink/DkGreen 0-0 Starter JEEP Commander Grand Cherokee U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 NAME COLOR WIRE DESCRIPTION YEAR C C MODEL MAKE TYPE - WIRE CHART - OF C pin C pin Pink/Orange 8 (-) Parking light relay, engine compartment. C pin C pin Pink/Orange 0-0 Starter 0-0 Starter OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 TYPE - WIRING DIAGRAM - OF MODULE VEHICLE IGNITION SWITCH CUT AND INSULATE THE PURPLE WIRE (NEXT TO WHITE WIRE) A A SKIM B F C E DATA D A B A SKIM HARNESS B PURPLE - STARTER OUTPUT GREEN/RED - CONTROL OUTPUT STARTER - 0 CONTROL - 0 A COMPATIBLE ACCESSORY C WITHOUT OEM HOOD SWITCH: INSTALL AND CONNECT TO AFTERMARKET HOOD SWITCH D IMPORTANT: SEE THE COMPATIBLE ACCESSORIES PAGE FOR DETAILS. B AFTERMARKET HOOD SWITCH (-) E F 8 9 0 0 GREEN/BLACK- HOOD STATUS (-) INPUT 0 BLUE/BLACK (NC) 0 RED/WHITE (NC) 0 BROWN (NC) 0 PURPLE/YELLOW (NC) 0 PURPLE/BLACK (NC) 0 WHITE (NC) 08 BLACK/WHITE (NC) 09 GREEN - PARKING LIGHT (-) OUTPUT 0 PURPLE/WHITE (NC) U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 SEE PARKING LIGHT NOTE OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE 8 OF DOC.: #8 009 U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 POLARITY MODULE LOCATION COMPONENT LOCATOR 0-0 WIRE COLOR Durango 0- POSITION Caliber 08- TYPE DODGE Avenger 0-0 COLOR Sebring 0-0 NAME Aspen - WIRE DESCRIPTION CHRYSLER 00 YEAR MODEL MAKE TYPE - WIRE CHART - OF White/Orange White Pink V Red White/Orange White Pink/Gray V Red Pink/Red Switch White/Orange White Pink V Red White/Orange White Pink V Red White/Orange White/Pink Pink/White V Red/LtBlue White/Orange White/LtBlue Pink/Gray V Red Pink/Red Switch OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE 9 OF DOC.: #8 009 U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 POLARITY MODULE LOCATION COMPONENT LOCATOR 0- WIRE COLOR Wrangler 0- POSITION Patriot TYPE 08- JEEP Liberty 0- COLOR Compass 0-0 NAME Ram Pickup WIRE DESCRIPTION 0- DODGE Nitro YEAR MODEL MAKE TYPE - WIRE CHART - OF White/LtGreen White Pink/White V Red + White/Green White/Orange White Pink/White V Gray/Red White/Green Switch White/Orange White/Pink Pink/White V Red/LtGreen White/ White/Blue Pink/White V Red White/Orange White/Pink Pink/White V Red/LtGreen White/ White/LtBlue Pink/White V Red + White/Orange Passenger kick pad OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE 0 OF DOC.: #8 009 U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 COLOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR 0 NAME YEAR MODEL Pickup WIRE DESCRIPTION RAM MAKE TYPE - WIRE CHART - OF White/Orange White Pink/White V Gray/Red White/Green Switch OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 TYPE - WIRING DIAGRAM - OF MODULE VEHICLE IGNITION SWITCH A A B F CANL - 0 CANH - 0 MUX - 0 IGNITION - 0 V - 0 C E DATA D A B 0 GRAY/YELLOW (NC) 0 GRAY/RED (NC) 0 GREEN/YELLOW (NC) 0 GREEN/RED (NC) 0 BLUE/YELLOW (NC) 0 BLUE/RED (NC) 0 PINK - IGNITION INPUT 0 PINK/BLACK (NC) 0 ORANGE (NC) 0 ORANGE/WHITE (NC) 0 ORANGE/BLACK (NC) 0 BROWN/YELLOW - CANL 0 BROWN/RED - CANH 0 YELLOW - MUX 0 YELLOW/RED (NC) 0 YELLOW/BLACK (NC) 0 WHITE - V 0 WHITE/RED (NC) 0 WHITE/BLACK - IGNITION OUTPUT C D SKIM 8 A E 0 0 0 0 BLUE/WHITE (NC) WHITE (NC) BLACK - GROUND RED - V V REQUIRED WITHOUT COMPATIBLE ACCESSORIES OR F 8 9 0 DATA CABLE 0 GREEN/BLACK- HOOD STATUS (-) INPUT 0 BLUE/BLACK (NC) 0 RED/WHITE (NC) 0 BROWN (NC) 0 PURPLE/YELLOW (NC) 0 PURPLE/BLACK (NC) 0 WHITE (NC) 08 BLACK/WHITE (NC) 09 GREEN - PARKING LIGHT (-) OUTPUT 0 PURPLE/WHITE (NC) U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 REQUIRED WITH COMPATIBLE ACCESSORIES WITHOUT OEM HOOD SWITCH: INSTALL AND CONNECT TO AFTERMARKET HOOD SWITCH AFTERMARKET HOOD SWITCH (-) SEE PARKING LIGHT NOTE OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 TYPE - WIRING DIAGRAM - OF MODULE VEHICLE IGNITION SWITCH A A SKIM B F C E DATA D A B A SKIM HARNESS A COMPATIBLE ACCESSORY C WITHOUT OEM HOOD SWITCH: INSTALL AND CONNECT TO AFTERMARKET HOOD SWITCH D IMPORTANT: SEE THE COMPATIBLE ACCESSORIES PAGE FOR DETAILS. AFTERMARKET HOOD SWITCH (-) E F 8 9 0 0 GREEN/BLACK- HOOD STATUS (-) INPUT 0 BLUE/BLACK (NC) 0 RED/WHITE (NC) 0 BROWN (NC) 0 PURPLE/YELLOW (NC) 0 PURPLE/BLACK (NC) 0 WHITE (NC) 08 BLACK/WHITE (NC) 09 GREEN - PARKING LIGHT (-) OUTPUT 0 PURPLE/WHITE (NC) U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 SEE PARKING LIGHT NOTE OL-AL(RS)-CH-[OL-MDB-ALL]-EN
MODULE PROGRAMMING PROCEDURE - STD KEY - OF 0 Close driver door. 0 Turn key to position. ACC ON START 0 Re-open driver door to wake up data bus. 08 Remove key. ACC 0 ON START Insert key into ignition. 09 Press UNLOCK on the OEM remote. If vehicle is not equipped with OEM remote, press module programming button. Turn key to ON position. 0 Wait, LED will turn solid GREEN for seconds. 0 LED will turn solid RED. Module Programming Procedure completed. 0 Within seconds, LED will flash GREEN rapidly. ACC ON START 0 ACC ON PAGE OF DOC.: #8 009 START U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
VALET MODE PROGRAMMING PROCEDURE - OF >> NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming. 0 Time restriction. Complete next step within seconds. 0 ACC ON START >> PAGE OF DOC.: #8 009 To exit valet mode: repeat steps to. Cycle ignition ON five times [x /ON] rapidly. ENGINE START STOP 0 0 Wait, LED will turn solid RED for seconds. Set ignition to position. ACC ON START ENGINE START STOP 0 Valet Mode Programming Procedure completed. U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
AFTERMARKET REMOTE PROGRAMMING - OF PAGE OF DOC.: #8 009 AFTERMARKET REMOTE PROGRAMMING: NOTES I All aftermarket remotes must be programmed to the RF-Kit. Refer to the RF-Kit user guide for aftermarket remote features and programming procedures. U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 MODULE NAVIGATION PROCEDURE - OF >> It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP. 0 >> Module must be programmed to the vehicle. 0 >> Use the Module Navigation Chart on the next page. 0 Set ignition to position. 0 TO ACCESS THE MENUS: Press and hold programming button until LED turns solid GREEN. 08 IN THE MENUS: Press the programming button as many times as the menu number indicates. LED will flash GREEN an equal amount of times continuously. 09 0 ACC ON START TO ACCESS THE OPTIONS: Press and hold programming button until LED turns solid RED. 0 IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED will flash RED an equal amount of times continuously. TO ACCESS THE SETTINGS: Press and hold programming button until LED turns solid GREEN. Configure every other setting and proceed to step. [Z] LED will flash GREEN as many times as the current (or default) setting number, continuously. MANDATORY: EXIT MODULE NAVIGATION. Press and hold programming button for seconds. LED will flash RED rapidly. Release programming button. LED will turn. [Z] IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED will flash GREEN an equal amount of times continuously. Module navigation completed. To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. >> Failure to exit the Module Navigation will drain vehicle battery. [Y] To save and return to the OPTIONS: Press and hold programming button until LED turns solid RED. [Y] LED will flash RED as many times as the current option number continuously. ENGINE START STOP 0 0 [X] U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
PAGE OF DOC.: #8 009 [Y] OPTIONS [X] MENUS MODULE NAVIGATION CHART: NOTES I Default settings are listed in bold. 0 0 ON 0 0 ON 0 0 ON 0 0 ON 0 ENABLE 0 DISABLE* 0 SEC 0 90 SEC 0 0 MIN 0 0 MIN 0 DISABLE 0 N/A 0 LOCK + UNLOCK + LOCK 0 LOCK + LOCK + LOCK 0 0 MIN 0 0 MIN 0 0 MIN 0 MIN 0 MIN 0 0 MIN 0 MIN 08 MIN 0 0 SEC 0 0 SEC 0 08 SEC 0 0 SEC 0 SEC 0 0 SEC 0 SEC 08 0 SEC 0- N/A 0 N/A 0 0 N/A 0 II Make sure the option is covered on the vehicle before attempting to change the setting. 0 0 0 0 0 0 0 [Z] SETTINGS MODULE NAVIGATION CHART - OF DISARM/UNLOCK BEFORE START RELOCK AFTER START RELOCK AFTER SHUTDOWN FORCE UNLOCK ALL ON FIRST PRESS TAKEOVER SECURE TAKEOVER DELAY FACTORY KEYLESS RS SEQUENCE CONFIGURATION 08 09 0-0 Technical Support only MODULE RUN TIME WAIT TO START DELAY N/A *Vehicle will shutdown when a door is opened. U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
[X] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC REMOTE STARTER ERROR CODES - OF I WARNING: The following applies only when the parking lights are connected and supported by the system. 0 Foot brake is ON. 0 Hood is open. II After a remote starter failure, the parking lights will flash [X] number times to indicate an error code. See table. 0 Engine tach signal is lost. 0 System is in Valet Mode. 0 Vehicle is moving (VSS). 08 Glow plug timeout error. REMOTE STARTER ERROR CODES: NOTES U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN PAGE 8 OF DOC.: #8 009
I II III DURING PROGRAMMING DURING REMOTE START WITH IGNITION U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 DIAGNOSTIC TEST MODULE LED STATUS MODULE DIAGNOSTICS - OF Flashing RED Missing/wrong information from firmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. Solid GREEN then Module correctly programmed. No activity or module already programmed. Flashing RED Module incorrectly programmed. Solid RED Module incorrectly programmed. Flashing GREEN Module correctly programmed and operational. Solid GREEN then Reset in progress. Invalid ground when running status from remote starter. Flashing RED Module incorrectly programmed or connected. Solid RED Module not programmed. Waiting for more vehicle information. Flashing GREEN False ground when running status from remote starter. Solid GREEN then Reset in progress. Module at rest and ready for a remote start sequence. OL-AL(RS)-CH-[OL-MDB-ALL]-EN PAGE 9 OF DOC.: #8 009
MODULE RESET PROCEDURE - OF 0 Disconnect all connectors from module except the BLACK -PIN connector. 0 Reconnect all connectors. 0 Disconnect the BLACK -PIN connector. 08 Repeat programming procedure. 0 PRESS AND HOLD programming button while connecting the BLACK -PIN connector. >> Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. 0 Wait, LED will flash RED. RELEASE programming button. 0 LED will turn RED for seconds. 0 Module RESET completed. U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN PAGE 0 OF DOC.: #8 009
TAKEOVER PROCEDURE - STD KEY - OF >> All vehicle doors must be closed and locked prior to remote start sequence. 0 Press unlock on OEM or aftermarket remote. 0 Insert key into ignition. ACC Failure to follow procedure will result in vehicle engine shutdown. ON START 0 >> PAGE OF DOC.: #8 009 Turn key to ON position. ACC ON START 0 Press and release BRAKE pedal. 0 Take over procedure completed. U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN
INSTALLATION CHECKLIST - OF PAGE OF DOC.: #8 009 CHECKLIST WARNING: Vehicle engine will start many times. Test in a well ventilated area. Close all vehicle doors, hood and trunk. Press the LOCK button once [x] on the aftermarket keyfob. 9 Press the START/STOP button once [x] on the aftermarket keyfob to shut down vehicle. Question : Does the vehicle shut down? Question : Do the doors lock? YES: Go to next step. NO: Repeat step. If problem persists, press the brake pedal once [x] to shut down the vehicle and call technical support. RAP and auto light shutdown test YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. 0 Press the UNLOCK button once [x] on the aftermarket keyfob. YES: Go to next step. NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists. Question : Do the doors unlock? Question 8: Did the radio, interior controls and headlights turn off within 0 seconds after remote start shutdown? YES: Go to next step. NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. Open hood. If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step. Press the TRUNK release button once [x] on the aftermarket keyfob if supported. Press the START/STOP button once [x] on the aftermarket keyfob to remote start vehicle. Question : Does the trunk or hatch open/unlock? Question 9: Does the vehicle remote start? YES: Close trunk or hatch and go to next step. NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists. Press the AUX button once [x] on the aftermarket keyfob if supported. Enter vehicle and close the doors. Question : Does the driver side sliding door open? Press the START/STOP button once [x] on the aftermarket keyfob to remote start vehicle. YES: Press the AUX button once [x] to close the driver sliding door and go to next step. Wait for the vehicle to start. NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. 8 Press brake pedal. Press the AUX button once [x] on the aftermarket keyfob if supported. YES: Go to next step. YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test. NO: Go to next step. Close hood. Question 0: Does the vehicle shut down? Question : Does the passenger side sliding door open? YES: Press the AUX button once [x] to close the passenger sliding door and go to next step. NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists. NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support. 9 Exit vehicle. 8 Press the START/STOP button once [x] on the aftermarket keyfob to remote start vehicle. 0 Installation checklist completed. Question : Does the vehicle remote start? YES: Go to next step. NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists. U.S. Patent No. 8,8,80 Automotive Data Solutions Inc. 0 OL-AL(RS)-CH-[OL-MDB-ALL]-EN