Vertex Floors Ltd. Room B & C, 15/f Hang Seng Causeway Bay Building, 28 Yee Wo Street, Causeway Bay. P.R. China. Berlin, den

Similar documents
Rockfon BV lndustrieweg JG Roermond NIEDERLANDE ISclKf. Ceiling Element

REPORT. Emission Test Chamber Study according to AFSSET. Project-No.: IAL Order-No.:

REPORT. Emission Test Chamber Study according to COV. Product: CLIPSO 705 No Sweat (06/04/10/009/09) IAL Project-No.

REPORT. Emission Test Chamber Study according to COV. Product: CLIPSO 495D (04/09/10/011/04) IAL Project-No.: IAL / Order-No.

REPORT. Emission Test Chamber Study according to COV. Product: CLIPSO IMPRIME UV (F ) Project-No.: IAL Order-No.

TFI Report Emission Testing

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

TFI Report Emission Testing

Test-Report. Power determination on PV-Modules at Standard Test Conditions (STC) and PID-Test. PI-Report-Number: a_V2 2012/04/03

Solutions for manufacturers. Thomas Neuhaus

Test Report. Lindner Aktiengesellschaft. Product Emissions Test according to ASTM Access Floor. April 2004

Überwachte Fertigungsstätte

TESTING LABORATORY FOR CIVIL ENGINEERING MATERIALS

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031

ELVI-System. Elevator Inspection System 2.0. Non destructive elevator testing

Influence of mounting tube diameter on anemometer output

Test report No

Report on the product testing, monitoring and evaluation of the FPC according to the contracted supervision Product type MDF El

Classification report No K1

Sound-absorbing spacer Sorp10

Report Test Report

Test report No

Robustness Validation of Methods developed by CEN/TC 351/WG 2. (Draft TS / WI351006) Summary report issued by project consortium

Test certificate General construction inspection test certificate Nr. 3666/4421 -a - Fe/Wi 1. Issue ( )

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Technical Report. No. EB138.0 on a measurement and simulation device to check compliance with the provisions of the ECE Regulation No.

IBExU Institut für Sicherheitstechnik GmbH An-Institut der Technischen Universität Bergakademie Freiberg

oééçêí=çå=cáåçáåöë= OMNUMOMP=Ó=N^== - english version - Truncated version dated 12 th July 2018

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Test report No

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Oil Consumption / Oil Dilution

Bohle FrameTec Frame Systems

Inspection Report. Coating name: IGP HWFclassic IGP Pulvertechnik AG Industrie Stelz, Ringstraße Wil Schweiz. Job number:

MFPA Leipzig GmbH Test, monitoring and certification point for building materials, products and systems

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Evaluation report. tests of material samples for the parameters heavy metals (Pb, Cd, Cr, Cu, Ni, Zn, Hg) LVHH, BTEX, PDH, PAH and EOX

CERTIFICATE of QUALITY TEST

Kraftfahrt-Bundesamt DE Flensburg

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Test report no

Annex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19 July Köln, 17 August 2012

Test report No

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Sparkasse zu Lübeck (Sort code ) Acc.No

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

TEST REPORT. No. 284a/14

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

ROLEC Gehäuse-Systeme GmbH Mr. Volker Borcherding Kreuzbreite 2 D Rinteln

Test Report. on Type Testing of Diaphragm Gland Seal Valves Type RWH-03 according to EN ISO 10297:2014

Proposal for a new Mutual Resolution (M.R.[x]) on Vehicle Interior Air Quality

über ein Bremssystem mit elektrischer Steuer-Ü benrag u ngsei n ri chtu ng

Operating Instructions

Static and dynamic oil compatibility tests for Freudenberg radial shaft seals to release the usage in FLENDER-gear units applications (Table T 7300)

Test report No

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Auftrags-Nr.: Order No.: Auftragsdatum: Order date: FT Technologies Ltd. (for add. information see page 3)

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Specifications. Indoor Air Comfort and Indoor Air Comfort Gold. Version / 2017

Gemeinschaft Thermisches Spritzen

Test Report /Al (Results with Batch 1) Vastern Timber Company Ltd. Wootton Bassett, Swindon

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Test Report: KTB Nr k. Mechanical load test up to 2400 Pa according to EN :2002. for: IFF Kollmannsberger KG

SOUTH AFRICAN NATIONAL STANDARD

HV-Fuse-links SSK type SSK 10/02

Prüffeld der Schaltwerke

Assembly & Exercise Guide. Carefully reading and keeping the operating Instructions before use.

Test report P E. J. Magner Dipl.-Ing. (FH) N. Machill

Assessment Report. Stanley Black & Decker Deutschland GmbH Richard-Klinger-Str Idstein

Test Report Order No _A1 / Part Hessisch Oldendorf. Order: Test of the electrostatic properties of a resilient floor coverings coated

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Audit Attestation for. MICROSEC Micro Software Engineering & Consulting Private Limited Company by Shares

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Deutsche Akkreditierungsstelle GmbH

Mechanical seals external, single or double type Crane 58U 58U

Technical Report. No. KO250.3E. on the TRAILER CONTROL MODULE

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Company name: Čerpadla NEPTUN Created by: Václav König Phone: Date:

Comparison EU and USA

Translation of the original mounting instruction. Mounting instruction drop side

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Certificate: / 22 March 2013

Solid biofuels Determination of total content of sulfur and chlorine

European B1 Fire Rating. soft collection softwall + softblock Fire Retardant (FR) Treated textile products. molo design, ltd

CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE PRESSURE

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Operating Instructions

THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY

EC type-examination of SITEMA Safety Brakes by DGUV Test

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Additives for Rapeseed Oil Fuel

This rule shall apply to any stationary source which is a major source of regulated air pollutants or of hazardous air pollutants.

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031

Transcription:

ALAB GmbH Wilsnacker Straße 15 10559 Berlin Simon Xia Room B & C, 15/f Hang Seng Causeway Bay Building, 28 Yee Wo Street, Causeway Bay Nach DIN EN ISO/IEC 17025:2005 durch die DAP Deutsches Akkreditierungssystem Prüfwesen GmbH akkreditiertes Prüflaboratorium. u. a. für die Prüfgebiete: Innenraumschadstoffe (Luft, Staub, Bau- und Ausstattungsmaterial einschließlich Prüfkammer- bzw. Prüfzellenuntersuchungen) sowie gasförmige Luftschadstoffe bei Arbeitsplatzmessungen. Die Akkreditierung gilt für die in der Urkunde aufgeführten Prüfverfahren. Berlin, den 25.02.2011 Examination report Nr. A61101003 Object: Geschäftszahl beim DIBt: II 44.156.603-193/10 Customer: Simon Xia Room B & C, 15/f Hang Seng Causeway Bay Building, 28 Yee Wo Street, Causeway Bay Contractor: ALAB GmbH Wilsnacker Str. 15 10559 Berlin Order receipt: 17.01.2011 Begin of examination: 17.01.2011 End of examination: 18.02.2011 This report contains 4 pages. ALAB - Analyse Labor in Berlin GmbH Wilsnacker Straße 15 10559 Berlin Amtsgericht Charlottenburg, Berlin HRB 29 006 Geschäftsführerin: Dipl.-Ing. Ruth Cremer Bankverbindung: Postbank Berlin, BLZ 100 100 10, Kto-Nr. 0 320 501 101 Telefon 030/394 99 83 Fax 030/394 73 79 Internet: www.alab-berlin.de e-mail: info@alab-berlin.de

Page 2 von 4 pages of the examination report Nr. A61101003 1 Object of Examination In accordance with the criteria of certification issued by the DIBt. The PVC Flooring was delivered in due packing form on 17.01.2011. 2 Extend of Examination We tested the samples according to the accreditation criteria to search for volatile and mediavolatile organic compounds (VVOC, VOC and SVOC). Analyses applied to the scheme of the AgBB for the evaluation of the emission of volatile organic compounds for products of the building industry. The examination in accordance with the accreditation criteria of the DIBt requires to take samples on Tenax and DNPH-cartridges after 3 days and 28 days. 3 3.1 Method of examination Setting up oft he test pieces We took one panel from the middle of the package received, cut out two pieces and applied them with the backsides together. The narrow sides were sealed with aluminium foil. Then we fixed the test piece between two aluminium frames with hose clips. The dimensions of one emitting surface were 0,095 m x 0,095 m. picture 1: sample on delivery

Page 3 von 4 pages of the examination report Nr. A61101003 3.2 Test Chamber The analysis was performed in a glass test chamber with glass cover in accordance with DIN ISO 16000-9. The test chamber had a cubic contents of 22,5 Liter. Examination temperature within the chamber was 23 C ± 1 C, a relative humidity of 50 % ± 5 %, a rate of air exchange of 1 h-1. The flow velocity ranges between 0,1 and 0,3 m/s. The area specific flow rate (q=n/l) was 1,25 m³/m²h ± 3 %. Abbildung 3: test piece in glass chamber After defining the blank value of the air within the test chamber, the test piece was applied into the test chamber on 17.01.2011. We took the first samples on 20.01.2011 (3 day measurement), the second on 24.01.2011 (7 day measurement) and we took the third sample on 14.02.2011-28 days after the application into the test chamber. Within each sample drawing, we took two air samples via sampling automats (type "Dräger Accuro 2000") on sorbent tubes filled with Tenax TA. The volume was 4 litres air of the test chamber at each sampling. And we took one air sample via sampling automats (type "Dräger Accuro 2000") on sorbent tubes "Supelco LPDNPH S10" for volatile Aldehydes. The volume was 48 litres air. The results of the test chamber analysis were recorded as the balance concentration resulting within the test chamber in [µg/m³].

Page 4 von 4 pages of the examination report Nr. A61101003 4 Results of examination The results are specified in the actual assessment mask according to the AGBB-scheme in the annex. The examined meets the actually valid criteria used for approval by the DIBt. 5 Conspicuousness When unpacking the original cardboard a characteristic odour of acetates was noticeably, but the odour evaporated quickly. 6 Annotation The results of examination only relate to the items of examination. Storable samples will be kept for 12 weeks, if no different agreement has been fixed. This analysis report may only be published completely. Partial publication could falsify the content of the report and is therefore subject to prior authorisation. Sincerely, Dieter Marchl (stellv. techn. Leiter) Barbara Kafadaro lu (verantw. Prüferin)

ALAB GmbH Wilsnacker Straße 15 10559 Berlin Room B & C, 15/f Hang Seng Causeway Bay Building, 28 Yee Wo Street, Causeway Bay Berlin, den 25.02.2011 Invoice No: A61101003 for examination report No. A61101003 vom 25.02.2011 Service was accomplished on: 25.02.2011 Object: Quantity Position / Service Einzelpreis Gesamtpreis 1 Chamber Emission Test (28 days) for DIBt certification à 1590,00 1.590,00 total Net 1.590,00 No value-added tax Total amount 1.590,00 We received with thanks the corresponding amount. ALAB - Analyse Labor in Berlin GmbH Amtsgericht Charlottenburg, Berlin HRB 29 006 Postbank Berlin, BLZ 100 100 10 Wilsnacker Straße 15 Geschäftsführerin: Dipl.-Ing. Ruth Cremer Konto-Nr.: 0 320 501 101 10559 Berlin Steuer-Nr. 29/502/00468 IBAN: DE95 1001 0010 0320 5011 01 Telefon 030 / 394 99 83 USt.ID-Nr. DE 136562246 BIC (SWIFT-Code): PBNKDEFF Fax 030 / 394 73 79 www.alab-berlin.de e-mail: info@alab-berlin.de