OUR LIGHTING PRODUCT SERIES Wall Pack Full Cutoff Wall Pack Wall Mount Canopy Troffers Exit Lights Area Light Flood Light Linear High Bay Vapor Tight Linear Fixture And More! 443 GREENBRIAR DR. STAFFORD, TEXAS 77477 1--838-5 info@dvdlights.com VISIT WWW.DVDLIGHTS.COM FOR MORE INFORMATION LED LIGHTING Minority Company HS491 HUB Member 133126563 REV 6
CONTENTS DVDLights, LLC is a Manufacture of Commercial LED lights and fixtures for both interior and exterior applications. LED lights are no longer the future, LED lights are the present! LED Lights are far more environmentally friendly and safer to use than old incandescent / traditional lamps. LED lights consume less energy and help to save on maintenance costs. Mercury free and give off no potentially harmful UV or infrared radiation. NO buzzing noise and NO flickering. Easy to dispose since they are made of plastic and metal. LED lighting is ballast free, further reducing the amount of energy consumed to light an area. Lights that offer 5 years warranty. We hope that this catalog will help you decide which lighting product best matches your application and needs. If you need more information or are in need of a specialty light, please let one of our knowledgeable Account Managers assist you further. We also have our well known manufacturer's representatives and distributors ready to help you. Please call us for more information on where you can purchase our products. WALL PACKS -------------------------------------1-4 FLOOD LIGHTS--------------------------------------5 AREA LIGHTS-----------------------------------------6 UFO HIGHBAY---------------------------------------7 LINEAR HIGHBAYS-----------------------------8-1 CANOPY LIGHTS-----------------------------11-13 TROFFERS-------------------------------------------14 PANELS----------------------------------------------15 EXIT SIGN ------------------------------------------16 VAPOR TIGHT-------------------------------------17 POLES------------------------------------------------19 MOUNTING----------------------------------------2 VISIT WWW.DVDLIGHTS.COM FOR MORE INFORMATION & PRODUCTS
WALL PACK LED Wall Pack (GEN 1) Up to 8,1 + Lumens Medium Wall Pack 5W, 6W & W Dimensions:14.213x13.7x7.42in. ENHANCED LED PERFORMANCE IN A The LED wall packs offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wall packs. This versatile luminaire is ideal for replacing existing MH (Metal Halide) fixtures. Applications: Security, pathway and perimeter lighting, Building entryways and walkways. MEDIUM WALL PACK 393C2-4WE 4 Lumens 4W > 75 175W MH 393C2-6W 72 Lumens 6W > 175W MH ENHANCED LED PERFORMANCE IN A The LED wallpacks offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wall packs. This versatile luminaire is ideal for replacing existing MH (Metal Halide) fixtures. Applications: Security, pathway and perimeter lighting, Building entryways and walkways. MEDIUM FULL CUTOFF WALL PACK 394C2-W 4, Lumens W 175W MH 394C2-W 7,35 Lumens W 25W MH WALL PACK Full Cutoff LED Wall Pack (GEN 2) Up to 7,35 + Lumens Medium Full Cutoff Wall Pack W&W Dimensions:14.212x9.251x8.779in. Up to 14,4 + Lumens Large Wall Pack 1W & 12W Dimensions:18x9.75x8.72in. Available with 277V LARGE WALL PACK 393C2-1W 12 Lumens 1W 32W MH 393C2-12W 144 Lumens 12W 4W MH LARGE FULL CUTOFF WALL PACK 394C2-W 9,5 Lumens W 32W MH 394C2-135W 14, Lumens 135W 4W MH Up to 14, + Lumens Large Full Cutoff Wall Pack W&135W Dimensions:18.98x1.81x9.75in. NEW Accessories Photocell - Button, 12V/12-277V USE: Photocell is field installed or Pre-installed in factory by requesting Emergency Battery Backup NO. EB-8W/min-1 USE lm min. Only suitable for W, W. DLC qualified at 4K and. LM- certified high performance and reliable lumileds Voltage is 12-277V/347V Die-cast aluminum with durable dark bronze coat finish. Junction box or wall mounted directly. Suitable for use in -4 t o 4. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is 12-277V/347V Die-cast aluminum with durable dark bronze coat finish. Junction box or wall mounted directly. Suitable for use in -4 t o 5. Accessories Photocell - Button, 12V/12-277V USE: Photocell is field installed or Pre-installed in factory by requesting 1 2
WALL PACK Slim Full Cutoff LED Wall Pack (GEN 3) The LED slim wall pack offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wall mount technologies. This versatile luminaire is ideal for replacing existing metal halide fixtures. Applications: Security, pathway and perimeter lighting Building entryways and walkways. The LED wall mount offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional wall mount technologies. This versatile luminaire is ideal for replacing existing MH (Metal Halide) fixtures. Applications: Security, entry ways, stairways, storage and perimeter areas, as well as residential exteriors. WALL PACK LED Wall Mount (GEN 1) Up to 2, + Lumens Wall Mount 15W&17W&25W Dimensions: 8.384x5.484x3.523in. Up to 4,5 + Lumens Slim Full Cutoff Wall Pack 3W & 4W Dimensions: 8.96x6.77x4.13in. SLIM FULL CUTOFF WALL PACK 169C2-3W 3, Lumens 3W 1W MH 169C2-4W 4,5 Lumens 4W 175W MH WALL MOUNT FROSTED 168C2-15W 1,6 Lumens 15W 1W INCANDESCENT Head tilts to 2degree Up to 1,5 + Lumens Large Full Cutoff Wall Pack W & W Dimensions:12.99x1.16x5.17in. Available with 347V LARGE FULL CUTOFF WALL PACK 169C2-W 7, Lumens W 25W MH 169C2-W 1,5 Lumens W 32W MH WALL MOUNT CLEAR 179C2-17W 1, Lumens 17W 12W INCANDESCENT 179C2-25W 2,6 Lumens 25W 5W MH Up to 2,6 + Lumens Wall Mount 17W & 25W Dimensions: 8.384x5.484x3.523in. Head tilts to 2degree DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is 12-277V HOUSING Die-cast aluminum housing with dark bronze coat finish head can be tilted design. PHOTOMETRY Type III light distribution is available. Junction box or wall mounted directly. Suitable for use in -4 t o 4. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is 12-277V Die-cast aluminum with durable dark bronze/black/white coat finish. Junction box or wall mounted directly. Suitable for use in -4 t o 4. 3 4
FLOOD LIGHT LED Flood Light Up to 24, Lumens Flood Light 5W - 2W Dimensions: 12.42x13.228x3.71in. NEW DESIGN Medium and Large LED floodlights available up to 3W replace up to 1,W metal halide floodlights, operating for 5,+ hours. This fixture is wet location rated for outdoor use. Rugged Die-cast aluminum housing, corrosion resistant and compact. Protective architectural dark powder paint finish, ensures lasting performance in harsh environmental conditions. Applications include building facades, displays, landscaping, security lighting, parking areas, walkways and other work areas. DVDLights and Area Light features outstanding photometric performance, excellent uniform illumination, low profile construction, high efficacy and long lifespan. The compact one-piece die-casting aluminum housing with UV resistant powder coat finish offers outstanding corrosion protection. Utilizing the latest LED technology and integrated cooling fins, it's ideal for commercial lighting application. AREA LIGHT LED Area Light (GEN 2) Up to 43, + Lumens Area Light 1W, 15W, 3W Dimensions: 22.46x12.99x7.99in. FLOOD LIGHT 181C2-W 84 Lumens W 25W MH NEMA 7Hx7V 184C2-1W 12, Lumens 1W 32W MH 7Hx7V AREA LIGHT LIFE SPAN 423C2-1W 14, Lumens 1W > 5, HOURS 423C2-15W 21,25 Lumens 15W > 5, HOURS AREA LIGHT Up to 42, Lumens Flood Light: 15W & 3W FLOOD LIGHT 181C2-15W 18, Lumens 15W 4W MH NEMA 7Hx7V FLOOD LIGHT 185C2-15W 181C2-2W 24, Lumens 2W 4W MH 7Hx7V 185C2-3W 423C2-3W 43,848 Lumens 3W > LIFE SPAN 6, HOURS 12-277V 423C7-3W 42, Lumens 3W > 6, HOURS 3-4V Standard versatile mounting arm accommodates multiple drilling patterns as well as square and round poles Wall Mount available for direct wall mounting and J-box mounting Optional for die-cast aluminum slip f itter mounting adapter 21, Lumens 42, Lumens 15W 3W 75W MH 1,W MH NEMA 7Hx7V 7Hx7V DLC qualified at. LM- certified high performance and reliable. Voltage is 12-277V/347V/4V and support -1V dimmable HOUSING Die-cast aluminum with durable dark bronze power coat finish. slip fitter mounting, Wall mount and Trunnion mounting. Suitable for use in -4 t o. Wall Mount Slip fitter Mount Trunnion Mount DLC qualified at. LM- certified high performance and reliable. Voltage is 12-277V/347V/4V and support -1V dimmable HOUSING Die-cast aluminum with durable power coat finish. Slip fitter mounting, Wall mount and Trunnion mounting. Suitable for use in -3 to. 5 6
HIGH BAY LED High Bay (GEN 1) IP65 WATERPROOF Up to 31, + Lumens High Bay 1W & 15W &24W Dimensions:Ø15.354x9.579in. The LED circular High Bay is designed to replace 25-4W MH (Metal Halide) high bay fixture, Either hook or conduit pendant install way allows no-extra changes on existing construction. Optional integrated lens or aluminum reflector as per applications. Combined with sensor detect added into the system, more energy would be saved and pretty less maintenance than MH (Metal Halide) technology. HIGH BAY 13C2-1W 13, Lumens 1W 72 25W MH 13C2-15W 19,5 Lumens 15W 72 4W MH The Superior Linear High Bay Fixtures available with lumen outputs from 13, to 42, lumens. These fixtures are ideal one-to-one replacement for conventional HID and T8 and T5 fluorescent fixture with mounting heights ranging from 15 to ceilings, widely used in Warehouse, Factory, Convention Center, Gymnasium etc. 7C2-1W 13 Lumens 1W > LED Linear High Bay Up to 13, + Lumens Linear High Bay (1W) Dimensions: 11.81x 4.65 x 4.53 in. IP 65 HIGH BAY 13C2-24W 31, Lumens 24W 72 25W MH 277 V 4 V 13C7-24W 31, Lumens 24W 72 25W MH 7C2-165W 21, Lumens 165W > 7C2-33W 42, Lumens 33W > DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is 12-277V/347V/4V and support -1V dimmable Die-cast aluminum with durable dark bronze coat finish. Fits Conduit Pendant mounting or hook mounting directly Suitable for use in -4 t o 55. UL listed for damp location. LM- certified high performance and reliable. Voltage is 12-277V and support -1V Die-cast aluminum housing Suspended or ceiling mounting Suitable for use in -4 t o 55. Up to 42, + Lumens Linear High Bay (165W&33W) Dimensions: 35.43 x 9. x 4.3 7 8
LED Linear High Bay (GEN 1) Up to 22,2 + Lumens Linear High Bay 2 x2 (W&15W&16W) Dimensions: 24.157x23.898x2.874in. Up to 43, + Lumens Linear High Bay 2 x4 (2W&32W) Dimensions: 47.48x24.157x2.874in. The Linear High Bay Fixtures available with lumen outputs from 8, to 43, lumens. Power factor >.9. -1V dimmable standard. These fixtures are ideal one-to-one replacement for conventional HID and T8 and T5 fluorescent fixture with mounting heights ranging from 15 to ceilings, widely used in Warehouse, Factory, Convention Center, Gymnasium etc. 2 x2 794C2-W 11,5 Lumens W ( 4 ) F32 T8 2 x4 795C2-32W 43, Lumens 32W ( 18 ) F32 T8 Accessories 794C2-15W 13,6 Lumens 15W ( 6 )F32 T8 Sensor - Screw on, 12V-277V/12V USE: Sensor can be pre-installed in factory or field installed Emergency backup USE: Emergency backup is preinstalled from factory 794C2-16W 22,2 Lumens 16W ( 8 ) F32 T8 These Linear High Bay Fixtures are available with lumen outputs from 12,35 to 24, lumens. Power factor >.9. -1V dimmable standard. These fixtures are ideal one-to-one replacement for conventional HID and T8 and T5 fluorescent fixture with mounting heights ranging from 15 to ceilings, widely used in Warehouse, Factory, Convention Center, Gymnasium etc. 799C-W 11, Lumens W (3) F54T5, (4) F32T8 or 25W HID 798C-13W 17, Lumens 13W (4) F54T5, (6) F32T8 or 4W HID 798C-1W 23,5 Lumens 1W (6) F54T5 or (8) F32T8 LED Linear High Bay (GEN 3) Up to 11, + Lumens Linear High Bay (W) Dimensions: 23.92x1.31x1.83in. Up to 23,5 + Lumens Linear High Bay (13W &1W) Dimensions: 23.92x19.69x1.83in. General distribution (no optics) Clear Acrylic Lens (LCA) option Optics (Narrow, Medium or Aisle) Prismatic Acrylic Lens (LPA) option Wire guard USE: Wire guard is field installed Pendant hanger USE: Pendant with 3/4 conduit UL listed for damp location. DLC qualified at 4K and. LM- certified high performance and reliable lumileds. Voltage is 12-277V/347V/4V and support -1V dimmable Die-cast aluminum housing with white coat finish. Conduit or chains Pendant Suitable for use in -4 t o 55. Choose your optical distribution Each optic is designed for a specific purpose.the general distribution allows a wash of light in any application. The medium beam is tailored for mid and higher mounting heights. The aisle beam has an asymmetric distribution for aisle or rack areas. General Aisle 1 1 135 135 135 135 Medium 1 135 9 1
DOME CANOPY SQUARE CANOPY Up to 5,3 + Lumens Canopy 4W & 6W Dimensions: 12.4 x12.4x 9 The LED Dusk To Dawn offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional MH (Metal Halide) technologies. With its included photocell, mounting arm and direct mounting hardware, these fixtures save you time and money. Applications: Backyards, service road and effective for security and perimeter lighting. SQUARE CANOPY 243C2-4WS 3,333 Lumens 4W > 74 243C2-6WS 5,356 Lumens 6W > 75 The CANOPY LIGHT offer maximum light output for general purpose area and security lighting. They efficiently deliver lumens, and consume less energy than traditional MH (Metal Halide) technologies. This versatile luminaire is ideal for replacing existing MH (Metal Halide) fixtures. Applications: Parking structures, storage areas, shopping area walkways, entryway, and low level security. SQUARE CANOPY 248C2-6W 66 Lumens W 1W MH SQUARE CANOPY LED Canopy (GEN 1) Up to 6,6 + Lumens Canopy 6W Dimensions: 1.4 x1.4 x 3.8 DOME CANOPY 243C2-4WD 243C2-6WD Up to 5,3 + Lumens DOME Canopy 4W Dimensions: 11.4 x14.8x.88 3,138 Lumens 4W > 6 Lumens 4W > SQUARE CANOPY 249C2-15W 16,5 Lumens 15W 1W MH (GEN 2) Up to 16, 5 Lumens Canopy 15W Dimensions: 15x15x2.8in. 11 LM- certified high performance and reliable lumileds. Voltage is 12-277V HOUSING Die-cast aluminum housing available with white or dark bronze coat finish. Surface mount. Suitable for use in -2ºC to +5ºC DLC qualified at 4K and under parking garage category LM- certified high performance using high quality 33 chips Voltage is 12-277V and support -1V dimmable Die-cast aluminum housing with white powder coat finish. Surface mount. Suitable for use in -35 t o 55. 12
ROUND CANOPY LED TROFFER LED Canopy (GEN 3) Up to 7,1 + Lumens Canopy 3W & W & 6W Dimensions: 12x12x3.32in. Emergency Battery NO. EB-8W/min-1 USE lm min. The new series Canopy light is ideal for parking garage and security lighting, they efficiently deliver maximum lumens, and consume less energy than traditional MH (Metal Halide) technologies. Optional surface mount or conduit pendent installation as per applications, Combined with sensor detect added into the system, more energy would be saved and less maintenance than MH (Metal Halide) technologies. CANOPY 247C2-3W 3,6 Lumens 3W 1W MH General 135 1 135 247C2-W 5, Lumens W 1W MH Parking Garage 135 1 247C2-6W 7,1 Lumens 6W 175W MH 135 LOW PROFILE DESIGN Low profile LED center lens fixtures are ideal for shallow plenum spaces. Specification grade, direct / indirect center diffuser appearance luminaire provides smooth and uniform ambient lighting for all commercial and industrial buildings with recessed configurations. Reflected light from matte surfaces provide a softened sky light appearance to the modern office environment. Linear ribbed lens encloses the LED array and is designed to maximize efficiency and minimize glare. 2 FT COLOR 784W2-35W 42 Lumens 35K, 4K, 35W Matte White *OPTIONAL BATTERY BACK-UP 4 FT 793W2-57W 42 Lumens 35K, 4K, 57W Matte White LOW PROFILE TROFFER Up to 34 Lumens 35W Dimensions: 12" X 24" X 3.4" D Up to 42 Lumens 57W Dimensions: 24" X 48" X 3.25" D Accessories Occupancy Sensor, 12-277V USE: Sensor is field installed LM- certified high performance and reliable lumileds. Voltage is 12-277V HOUSING Die-cast aluminum housing available with white or dark coat finish. Surface mount. Suitable for use in -4 to. T8 TUBE TROFFER 2 FT COLOR LD-T8-TR4-1 1 Lumens 1W Matte White 4 FT LD-T8-TR4 42 Lumens 6K 22W Matte White LM- certified high performance and reliable lumileds Voltage is 12-277V, -1V Dimming available HOUSING Die-formed and embossed code 22 gage steel Recessed inverted T-Bar ceilings. Grid mount or Surface Mount. Suitable for use in -2 to 5. 13 14
PANELS LED PANELS NEW DESIGN Our Ultra Slim LED Panel Lights are constructed out of the finest ultra thin optical acrylic sheets with fully lined edges of embedded high output Tier One LEDs, which guarantee instant start with no flickering or buzzing. Across the back is an engraved light distribution matrix to produce the brightest most uniform illumination. This light distribution grid pattern is optimized to ensure edge to edge light over the face of the panel which is pleasing to the eye - casting no shadows or glare. These durable emergency light is used by hotels, apartment buildings, restaurants or really any place an emergency light is required by code. It is pretty easy to install, relatively maintenance free and has a red quick test button. It features a rechargeable battery that should last at least 5 years. When installing make sure to choose between 12 volt and 277 Volt wires. Self-diagnostic feature performs monthly, biannual, and annual tests to ensure reliable operation and meet electrical and life safety codes. EXIT SIGNS LED EXIT SIGNS Up to 41 Lumens Dimensions: 23.8" X 23.8" X.43 2 x 2 DIMMABLE 664D2-32WW 416 Lumens 4K 32W > 12-277V COMBO EXIT SIGN AC POWER COLOR 5E2-R 8W RED AC 12W/277V 5E2-G 8W GREEN AC 12W/277V BATTERY LEAD-ACID6V 4.5Ah LEAD-ACID6V 4.5Ah EMERGENCY DURATION > 3 HOURS > 3 HOURS Up to 34 Lumens Dimensions: 48" X 12" X.43 1 x 4 673C2-4WW 34 Lumens 65K 4W > 12-277V CLEAR EXIT SIGN 4E2-R 4E2-G AC POWER 5W 5W COLOR RED GREEN Up to 65 Lumens Dimensions: 47.8" X 23.8" X.43 2 x 4 DIMMABLE 684D2-5WW 65 Lumens 4K 5W > 12-277V BATTERY EMERGENCY DURATION AC 12W/277V Ni-Cd 4.8V 6.5Ah > 3 HOURS AC 12W/277V Ni-Cd 4.8V 6.5Ah > 3 HOURS cul listed and DLC qualified LM- certified high performance and reliable. Voltage is 12-277V and support -1V dimmable Recessed, surface mount and suspended Suitable for use in -2 t o. UL listed UL924 DLC qualified at 4K and. BATTERY Long life maintenance-free, rechargeable NiCd battery. Voltage is 12-277V Die-cast aluminum / ABS Housing. Wall, side or ceiling mounting Suitable for use in -1 t o 5. 15 16
VAPOR TIGHT LINEAR LED Vapor Tight Linear (GEN 2) Up to 63 + Lumens Vapor Tight Linear 4 (5W & 6W) Dimensions: 47.14x5.x3.68in. DVDLights combines the benefits of LED technology with the features OEMs have come to rely upon in the flagship GEN2 series. The Fixture utilizes gear tray internal construction for cost effectiveness and functional practicality by minimizing required internal metal components. Drivers mount to the driver tray for thermal isolation. The housing is sealed against dust and moisture and available in a variety of lens, latch, and wire-entry configurations VAPOR TIGHT LINEAR 4 4C2-5W 675 Lumens 5W BUILT-IN BATTERY BACK-UP 4C2-5WB 6,2 Lumens 5W NOTES General 1 Parking Garage 1 135 135 LM- certified high performance and reliable. Voltage is 12-277V and support -1V dimmable Die-cast aluminum housing with white powder coat finish. Surface mount or chain mounting. Suitable for use in -4 t o. 17 18
POLES MOUNTING POLES Poles designed for easy installation, convenient storage, and simple handling. The pole shaft is fabricated from hot rolled carbon steel having a minimum yield of 55, PSI and conforms to ASTM A5 grade C requirements. The multiple pole pieces interlock via a splice plug welded to the top pole section and secured into the lower section using set screws. The hand hole is located 1 6 above the pole base. POLES SIZES LD-POLE-SQ-2-4X4 LD-POLE-SQ-25-4X4 LD-POLE-SQ-2-5X5 LD-POLE-SQ-25-5X5 GA RATED 11 11 11 11 POLE SIZE 4" SQUARE 4" SQUARE 5" SQUARE 5" SQUARE BULLHORN TWO SLOTS 4 X 4 5 X 5 BULLHORN THREE SLOTS ANCHOR BASE The anchor base is fabricated from a structural quality hot rolled carbon steel plate that has a minimum yield strength of 36, PSI. The anchor base telescopes the pole shaft and has a circumferential weld on the top and bottom. BASE COVER A full base cover is provided which encapsulates the base plate and anchor bolts to provide a clean transition from pier to pole. FINISH A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. WALLMOUNT 19 2