Proportional Valve Group PVG 16/32/128/256

Service and Parts Manual Proportional Valve Group www.danfoss.com

Revision history Table of revisions Date Changed Rev October 208 Combined installation guides, service and parts manuals 00 2 Danfoss October 208 AX2846688990en-0000

Contents Function Installation Safety in Systems... 5 PVG 6/32 sectional drawings... 7 PVG 28/256 Sectional Drawing...0 PVG 6 installation... Standard assembly... Plug orientation... 2 Maximum flow setting...3 Pressure setting and adjustment...4 Installation of lever...6 Bleeding... 7 PVE Series 6...8 Relevant technical data...9 PVHC...2 LED characteristics... 22 Standard main spool assembly...23 PVG 32 installation...24 Standard assembly...24 Plug orientation... 25 Maximum flow setting...26 Pressure setting and adjustment...27 Installation of lever...29 Bleeding... 29 PVEP series 4...30 PVED-CC series 5... 32 PVE series 7... 34 PVHC...38 Standard main spool assembly...40 PVG 28/256 installation... 4 Standard assembly...4 Plug orientation... 42 Pump side module... 43 Pressure setting...44 Installation of lever...45 PVE series 7... 46 PVHC...49 Standard main spool assembly...5 PVG acronyms found in service parts... 52 PVG 6 service parts...53 Pump side module, PVP... 53 Pump side module PVPV...56 Electrical LS pressure unloading valve, PVPX... 57 PVB with LS port...59 PVB with PVLP/PVLA, basic module...6 PVLP Shock and PVLA, Suction Valves... 63 PVBS, main spool... 64 PVM mechanical activation...65 PVMD cover... 66 PVH hydraulic actuation...67 PVHC high current actuation...68 PVE series 6 PVEO on/off actuator... 69 PVE series 6 PVEA proportional actuator... 70 PVS/PVSI end plates...7 PVAS stay bolts... 73 Seal kits...74 PVG 32 service parts...75 Danfoss October 208 AX2846688990en-0000 3

Contents Pump side module PVP... 75 Pump side module PVPV...78 Pump side module PVPM/PVPVM... 80 Electrical LS pressure unloading valve, PVPX... 8 External pilot pressure adapter, PVPC...83 PVB basic module... 84 Basic module, PVBZ...87 PVBZ with PVBD diverter...89 PVLP Shock and PVLA, Suction Valves... 9 PVBS main spool... 92 PVM medchanical activation... 93 PVMD, PVMR and PVMF covers...94 PVH hydraulic actuation...96 Electrical actuation PVHC...97 PVDI directional indication...98 PVS/PVSI end plates...99 PVSI, PVSD, PVST end plates...0 PVAS stay bolts...04 Seal kits... 05 PVE series 4 PVEO...06 PVE series 4 PVEA... 07 PVE series 4 PVEM... 08 PVE series 4 PVEP...09 PVE series 4 PVEU... 0 PVE series 4 PVEH... PVE series 4 PVES...2 PVED-CC series 5...3 PVE series 7 PVEO...4 PVE series 7 PVEO-HP...5 PVE series 7 PVEM... 6 PVE series 7 PVEA... 7 PVE series 7 PVEH... 8 PVE series 7 PVES...9 PVG 28/256 service parts...20 Pump side module, PVPV... 20 PVB 28, basic module... 22 PVB 256, Basic Module... 24 PVLP Shock and PVLA, Suction Valves...26 PVBS main spool...27 PVM mechanical activation... 28 PVMD cover...29 PVH hydraulic actuation... 30 PVHC high current actuation... 3 PVEO on/off actuator... 33 PVEH proportional actuator... 35 PVS end plates...37 PVAS stay bolts...39 Seal kits... 40 4 Danfoss October 208 AX2846688990en-0000

Function Safety in Systems All types and brands of control valves, including proportional valves, can fail. Therefore, the necessary protection against the serious consequences of a functional failure should always be built into the system. General safety considerations For each application an assessment should be made for the consequences of the system in case of pressure failure and uncontrolled or blocked movements. W Warning Because the proportional valve is used in many different applications and under different operating conditions, it is the sole responsibility of the manufacturer to ensure that all performance, safety and warning requirements of the application is met in his selection of products and complies with relevant machine specific and generic standards. Control system example An example of a control system using an aerial lift is shown below: Aerial lift This example breaks down the control system into smaller bits explaining the architecture in depth. Even though many Danfoss components are used in the PVG control system. The function of the control system is to use the output from the PVE together other external sensors to ensure the PLUS+ main controllers correct function of the aerial lift. Danfoss October 208 AX2846688990en-0000 5

Function Electrical block diagram W Warning It is the responsibility of the equipment manufacturer that the control system incorporated in the machine is declared as being in conformity with the relevant machine directives. C Caution A mix of electrical actuation and hydraulic actuation on the same valve stack is not safe. PVE and PVH are designed for different pilot pressure. Cost-free repairs, as mentioned in Danfoss General Conditions of Sale, are carried out only at Danfoss or at service shops authorized by Danfoss. 6 Danfoss October 208 AX2846688990en-0000

Function PVG 6/32 sectional drawings Sectional views of the product help identify certain components for servicing. PVG 6/32 PVP open center PVG 6/32 closed center Danfoss October 208 AX2846688990en-0000 7

Function PVG 6 with PVEO PVG 6 with PVEA 8 Danfoss October 208 AX2846688990en-0000

Function PVG 32 with PVEO PVG 32 with PVEH Danfoss October 208 AX2846688990en-0000 9

Service and Parts Manual Function PVG 28/256 Sectional Drawing PVG 256 with PVEH PVG 256 with PVEO 0 Danfoss October 208 AX2846688990en-0000

Service and Parts Manual Installation PVG 6 installation Standard assembled PVG 6 The exploded view illustration helps identify PVG 6 components to assist in installation. Oil flow direction for standard assembled PVG 6 PVM PVM A B B A PVS C xxx xxx xx xxx PVP xxx D xx xxx xxx PVEO/A xx PVB6 PVEA-F PVEO/A-CI PVHC PVH PVMD Identification C: PVG number, week and year of installation and series number PVP- pressure setting D: Engraved part number on PVP and PVB Danfoss October 208 AX2846688990en-0000

Installation PVG 6 Plug orientation The plug/port orientation shows dimensions of assembled product based on number of PVB used and data on mounting threads. Mounting thread: M8 x min 0 mm or 5/6-8 x min 0.39 in Torque: 40 N m [354 lbf in] Mounting thread: M8 x min 0 mm or 5/6-8 x min 0,39 in Torque: PVS: 20 N m [77 lbf in] PVSI: 40 N m [354 lbf in] In particularly exposed applications, protection in the form of screening of the electrical actuator is recommended L L2 In particularly exposed applications, protection in the form of screening of the electrical actuator is recommended Dimensions No. of PVB 6 2 3 4 5 6 7 8 9 0 2 L mm 74 4 54 94 234 274 34 354 394 434 474 54 [in] [2.9] [4.49] [6.06] [7.64] [9.2] [0.79] [2.36] [3.94] [5.5] [7.09] [8.66] [20.24] L2 mm 40 89 23 262 3 336 385 434 458 507 55 576 [in] [5.5] [7.44] [8.39] [0.3] [2.24] [3.23] [5.6] [7.09] [8.03] [9.96] [2.69] [22.68] 2 Danfoss October 208 AX2846688990en-0000

Installation PVG 6/32 pump side module, PVP Pump side and max flow setting B B A A Flow P A Max. flow: P B 6±Nm[53±9lbf-in] Danfoss October 208 AX2846688990en-0000 3

Installation PVG 6 pressure setting (LS connection) PVG 6 pressure setting, PVP/PVB C LS B C C LS C Relief valve adjustment C-C 4[0.6] 360 20bar [740 psi] T The table below determines which availability of relief valve based on date of PVP/PVB purchase. Relief valve availability Valve Prior to week 40/2003 Between week 40/2003 and week 2/202 Relief valve X X Relief valve 2 X X After week 2/202 4 Danfoss October 208 AX2846688990en-0000

Installation Rated pressure Product PVG 6 with PVS PVG 6 with PVSI Rated pressure 300 bar [435 psi] 350 bar [5076 psi] Torque on connection/port based on seal used Max. tightening torque Screwed connection RG BSP. F, R, G With steel washer Connection/port P A/B T LS, M, LSA, LSB, PVH, Accu. LX, PVS, PVSI /2 in 3/4 in 3/8 in 3/4 in /4 in /8 in /4 in 30 N m [50 lbf in] With copper washer 30 N m [270 lbf in] With aluminum washer 70 N m [620 lbf in] With cutting edge 30 N m [50 lbf in] 20 N m [850 lbf in] 50 N m [445 lbf in] 0 N m [970 lbf in] 20 N m [850 lbf in] 30 N m [50 lbf in] 30 N m [270 lbf in] 70 N m [620 lbf in] 30 N m [50 lbf in] 20 N m [850 lbf in] 50 N m [445 lbf in] 0 N m [970 lbf in] 20 N m [850 lbf in] 40 N m [350 lbf in] 20 N m [80 lbf in] 30 N m [270 lbf in] 40 N m [350 lbf in] 7 N m [50 lbf in] 5 N m [35 lbf in] 5 N m [35 lbf in] 7 N m [50 lbf in] 40 N m [350 lbf in] 20 N m [80 lbf in] 30 N m [270 lbf in] 40 N m [350 lbf in] Screwed connection UNF 7/8 in - 4 /6 in - 2 3/4 in - 6 /6 in - 2 /2 in - 20 3/8 in - 24 /2 in - 20 O-ring 90 N m [800 lbf in] 20 N m [060 lbf in] 90 N m [800 lbf in] 20 N m [060 lbf in] 30 N m [270 lbf in] 0 N m [90 lbf in] 30 N m [270 lbf in] Danfoss October 208 AX2846688990en-0000 5

Service and Parts Manual Installation PVG 6 installation of lever PVM lever installation positions and range 9.5 22.3 9.5 9 22.5.5.3 9.5 9.5 9 Standard installation is shown on the left, installation with float is shown on the right. 6 Danfoss October 208 AX2846688990en-0000

Installation PVG Bleeding If the group is installed vertically, it is recommended to bleed it at the adjusting screws (Pos. A). It may be necessary to bleed the PVEK because of the hydraulic build-up of PVEA. PVG 6/32 bleeding A Danfoss October 208 AX2846688990en-0000 7

Installation PVG 6 with PVE series 6 installation PVE series 6 exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] When installing, protect the LVDT pin (if present), ensure O-rings are in place and be sure to not overtorque. 8 Danfoss October 208 AX2846688990en-0000

Installation PVEO/PVEO-CI control specifications PVG 6 technical data overview Only an overview of technical data is shown below; for comprehensive data, please see the Technical Information document for PVG 6. Description Type Value Supply Voltage (Udc) Rated 2 Vdc 24 Vdc Range to 5 Vdc 22 to 30 Vdc Max. ripple 5% 5% Current consumption Typical 320 ma 60 ma PVEA/PVEA-CI/PVEA-F control specifications Supply voltage (Udc) Rated to 32 Vdc Range to 32 Vdc Max. ripple 5% Signal voltage (Us) Neutral 0.5 Udc Q: P A 0.25 Udc Q: P B 0.75 Udc Current consumption @ 2 Vdc 320 ma @ 24 Vdc 70 ma Input impedance Rated 2 kω Input capacitance Rated 00 µf Operating conditions Pilot pressure Nominal 3.5 bar [96 psi] Minimum 0.0 bar [45 psi] Maximum 5.0 bar [28 psi] Oil consumption Neutral 0.04 l/min [0.0 US gal/min] Locked position 0.04 l/min [0.0 US gal/min] Actuating 0.6 l/min [0.6 US gal/min] Storage temperature Ambient -50 to +90 C [-58 to +94 F] Operating temperature Ambient -40 to +90 C [-40 to +94 F] Oil viscosity Operating range 2 to 75 mm 2 /sec [65 to 347 SUS] Minimum 4 mm 2 /sec [39 SUS] Maximum 460 mm 2 /sec [228 SUS] Oil cleanliness Minimum 8/6/3 (according to ISO 4406) PVG 6 connector variants PVG 6 connector variants for PVEO, PVEA, PVEO-CI, PVEA-CI, PVEA-F with pin layout information. Danfoss October 208 AX2846688990en-0000 9

Installation Pin connector x 4 DEUTSCH 2 x 4 DEUTSCH x 6 DEUTSCH 2 3 4 4 3 2 2 3 4 3 4 2 5 6 Pin layout for PVEO, PVEA, PVEO-CI, PVEA-CI PVE Type Connector Pin Pin 2 Pin 3 Pin 4 PVEO x 4 DEUTSCH NC2 Vneg Vneg NC4 PVEA x 4 DEUTSCH Vi SP Vneg Vbat PVEO-CI, PVEA-CI 2 x 4 DEUTSCH CAN_H CAN_L Vbat Vneg Pin layout for PVEA-F Connector Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 x 6 DEUTSCH Vi NC Vf SP Vneg Vbat 20 Danfoss October 208 AX2846688990en-0000

Installation PVHC for PVG 6 5 [0.97] 8 ±0.5 Nm [70 ±4.4 lbf in] The seal in the PVHC connector and the seals for individual conductors are crucial for correctly sealing the conductor. U DC (B) U DC (A) Technical data Controller output current range 2 V 0 200 ma 24 V 0 600 ma Coil resistance 2 V.0 Ω ± 5% 24 V 0.25 Ω ± 5% Pilot pressure (over tank) Nominal 25 bar [363 psi] Minimum Maximum 2 bar [305 psi] 25 bar [363 psi] Control pressure Range 5-5 bar [72.5-27.5 psi] Maximum tank pressure Port T Static 25 bar [363 psi] Port T Dynamic 30 bar [435 psi] Temperature range Ambient -30 C to 80 C [-22 to 76 F] Medium -20 C to 80 C [-4 to 76 F] Oil viscosity Range 2 to 75 mm2/s [65 to 347 SUS] Minimum Maximum Enclosure Protection class DEUTSCH DT IP 67 Filtering in the hydraulic system; Max. permissible degree of contamination Designed to be used with hydraulic activated spools 23/9/6 (ISO 4406, 999 version) 4 mm2/s [39 SUS] 400 mm2/s [230 SUS] Danfoss October 208 AX2846688990en-0000 2

Installation PVG 6 LED characteristics For troubleshooting LED characteristics, please see the Technical Information document for PVG 6. PVEO LED characteristics Color LED view Function Green Power ON PVEA LED characteristics Green Green @.5 Hz Red Red @.5 Hz Operating Power Save mode Internal fault External or Float fault 22 Danfoss October 208 AX2846688990en-0000

Installation PVG 6 main spool assembly 8±Nm 8±Nm Danfoss October 208 AX2846688990en-0000 23

Installation PVG 32 installation Standard assembled PVG 32 Oil flow direction for standard assembled PVG 6 The exploded view illustration helps identify PVG 32 components to assist in installation. PVM PVM B A B A PVS C D xxxxxxxxxxxxxxxxxxxxxx PVP PVEP PVB32 PVED PVEO/A/M PVEH PVHC PVH PVMD Identification C: PVG number, week and year of installation and series number PVP- pressure setting D: Engraved part number on PVP and PVB 24 Danfoss October 208 AX2846688990en-0000

Installation PVG 32 plug orientation The PVG 32 series has increasing L port sizes with higher PVB numbers. *85[3.3] *70[6.7] *70[6.7] PVP/PVSI: Max. 40 Nm [354 lbf in] PVS: Max. 20 Nm [77 lbf in] *85[3.3] In particularly exposed applications, protection in the form of screening of the electrical actuator is recommended Number of PVB 32 2 3 4 5 6 7 8 9 0 2 L mm 82 30 78 226 274 322 370 48 466 54 562 60 [in] [3.23] [5.2] [7.0] [8.90] [0.79] [2.68] [4.57] [6.46] [8.35] [20.24] [22.3] [24.02] L2 mm 4 90 238 287 335 384 432 48 529 578 626 675 [in] [5.55] [7.48] [9.37] [.30] [3.9] [5.2] [7.0] [8.94] [20.83] [22.76] [24.65] [26.57] Danfoss October 208 AX2846688990en-0000 25

Installation PVG 6/32 pump side module, PVP Pump side and max flow setting B B A A Flow P A Max. flow: P B 6±Nm[53±9lbf-in] 26 Danfoss October 208 AX2846688990en-0000

Installation PVG 32 pressure setting PVG 32 pressure setting (LS connection) C LS C C LS B C C LS A C 4[0.6] C-C 6[0.24] C-C 360º~20 bar 360º~740 psi 360º~00 bar 360º~450 psi T T P0940 Relief valve availability Valve Prior to week 40/2003 Between week 40/2003 and week 2/202 Relief valve X X Relief valve 2 X X Rated pressure "X" denotes availability. After week 2/202 Module PVG 32 with PVS PVG 32 with PVSI PVG 32 with PVBZ PVG 32 with HIC aluminum PVG 32/20 with PVS PVG 32/20 with PVSI PVG 32/00 with PVS PVG 32/00 with PVSI Rated pressure 300 bar [435 psi] 350 bar [5076 psi] 20 bar [3046 psi] 20 bar [3046 psi] 300 bar [435 psi] 350 bar [5076 psi] 300 bar [435 psi] 350 bar [5076 psi] Torque on connection/port based on seal used Seal Connection/port P A/B T LS, M, LSA, LSB, PVH, Accu. LX, PVS, PVSI Sealing thread G/2 G3/4 G/2 G3/4 G/2 G/8 G/4 With steel washer 30 N m [50 lbf in] 20 N m [850 lbf in] 30 N m [50 lbf in] 20 N m [850 lbf in] 40 N m [350 lbf in] 7 N m [50 lbf in] 40 N m [350 lbf in] Danfoss October 208 AX2846688990en-0000 27

Installation Torque on connection/port based on seal used (continued) Seal With copper washer 30 N m [270 lbf in] with aluminum washer 70 N m [620 lbf in] With cutting edge 30 N m [50 lbf in] Connection/port P A/B T LS, M, LSA, LSB, PVH, Accu. 50 N m [445 lbf in] 0 N m [970 lbf in] 20 N m [850 lbf in] 30 N m [270 lbf in] 70 N m [620 lbf in] 30 N m [50 lbf in] 50 N m [445 lbf in] 0 N m [970 lbf in] 20 N m [850 lbf in] 20 N m [80 lbf in] 30 N m [270 lbf in] 40 N m [350 lbf in] LX, PVS, PVSI 5 N m [35 lbf in] 5 N m [35 lbf in] 7 N m [50 lbf in] 20 N m [80 lbf in] 30 N m [270 lbf in] 40 N m [350 lbf in] 28 Danfoss October 208 AX2846688990en-0000

Installation PVG 32 installation of lever The lever must be screwed in completely. 9.5 9.5 3 (±0.5N m) 8 ± N m PVG Bleeding If the group is installed vertically, it is recommended to bleed it at the adjusting screws (Pos. A). It may be necessary to bleed the PVEK because of the hydraulic build-up of PVEA. PVG 6/32 bleeding A Danfoss October 208 AX2846688990en-0000 29

Installation PVEP series 4 for PVG 32 Seals must be correctly set to successfully seal the connector. PVEP/PVEP-F PVEP/PVEP-F 5[0.20] 8±0.5 Nm [70±4.4 lbf in] Be sure to protect the LVDT Pin and O-rings are in place during installation. Do not over torque. The seal in the DEUTSCH connector and the use of.5 mm 2 lines in all connections are crucial for correctly sealing the connector. PVEP series 4 for PVG 32 pin layout x6 DEUTSCH 3 4 2 5 6 Pin layout Type Connector Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 PVEP x6 DEUTSCH PWM_A Error PWM_B No connection Not used Udc PVEP series 4 for PVG 32 technical data PVEP control specification Description Type Value Supply Voltage (UDC) Range to 32 VDC Max. ripple 5% Max. 5 min 36 V 30 Danfoss October 208 AX2846688990en-0000

Installation PVEP control specification (continued) Description Type Value PWM Control range 0 80 % Float position control PWM_A = PWM_B = 90 % Frequency Input voltage swing Trigger point 00-000 Hz 0 UDC Input Impedance Standard pull down 5 kw Power consumption Error voltage Fault V bat PVEP operating conditions No fault 70 % of V bat 7 W < 2 V All connector terminals are short-circuit protected, and protected against reverse connection (and their combinations). Connecting error pins from two or more PVE s will cause the surveillance system to malfunction. Description Type Value Pilot Pressure Nominal 3.5 bar [96 psi] Minimum Maximum 0.0 bar [45 psi] 5.0 bar [28 psi] Oil Consumption Neutral 0.04 l/min [0.0 US gal/min] Locked Position Actuating 0. l/min [0.03 US gal/min] 0.6 l/min [0.6 US gal/min] Storage Temperature Ambient -40 to +90 C [-40 to +94 F] Operating Temperature Ambient -30 to +60 C [-22 to +40 F] Oil Viscosity Operating Range 2 75 cst [65 347 SUS] Minimum Maximum 4 cst [39 SUS] 460 cst [228 SUS] Oil Cleanliness Maximum 8/6/3 (according to ISO 4406) PVEP LED characteristics Green Red Red @.5 Hz Operating Internal fault External or float fault Danfoss October 208 AX2846688990en-0000 3

Installation PVED-CC series 5 for PVG 32 Assembling the PVE requires close attention and completion of the information below. PVED-CC series 5 installation V30 452.A V30452.A Be sure to protect LVDT pin and O-rings are in place. Do not over torque. PVED-CC series 5 for PVG 32 pin layout 2x4 AMP 2 3 4 2x4 DEUTSCH 4 3 2 2 3 4 Pin layout for PVEP Type Connector Pin Pin 2 Pin 3 Pin 4 PVEP 2x4 AMP CAN-L Vbat+ GND CAN-H 2x4 DEUTSCH CAN-H CAN-L Vbat+ GND All pins are internally connected. Internally connected 32 Danfoss October 208 AX2846688990en-0000

Installation PVED-CC series 5 for PVG 32 technical data PVED-CC control specification Description Type Value Supply Voltage (UDC) Nominal to 32 VDC Minimum 9 V Maximum 36 V Current consumption @ 2 V 560 ma @ 24 V 300 ma Power consumption @ 2 V 6.2 W @ 24 V 7.2 W PVED-CC operating conditions Description Type Value Pilot Pressure Nominal 3.5 bar [96 psi] Minimum 0.0 bar [45 psi] Maximum 5.0 bar [28 psi] Oil Consumption Neutral 0 l/min [0 US gal/min] Locked Position 0 l/min [0 US gal/min] Actuating 0.7 l/min [0.84 US gal/min] Storage Temperature Ambient -40 to +90 C [-40 to +94 F] Operating Temperature Ambient -30 to +60 C [-22 to +40 F] Oil Viscosity Operating Range 2 75 cst [65 347 SUS] Minimum 4 cst [39 SUS] Maximum 460 cst [228 SUS] Oil Cleanliness Maximum 8/6/3 (according to ISO 4406) Grade of enclosure IP 66 Danfoss October 208 AX2846688990en-0000 33

Installation PVE series 7 for PVG 32 Assembling the PVE requires close attention. PVEO/M/A Series 7 PVEH/S Series 7 5 [0.2] 8 ± 0.5 N m [70 ± 4.4 lbf in] 5 [0.2] 8 ± 0.5 N m [70 ± 4.4 lbf in] P0920 Be sure to protect LVDT pin if present and ensure O-rings and gaskets are in place during installation. Do not over torque. PVEA is not compatible with PVG 00 High Flow. PVE series 7 for PVG 32 connector overview x 4 DEUTSCH 2 x 4 DEUTSCH x 6 DEUTSCH 2 3 4 4 3 2 3 4 2 5 6 2 3 4 x 4 AMP 2 x 4 AMP x 6 AMP x 4 DIN 2 3 4 248 4 3 2 5 2 3 4 6 2 3 4 PVEO-DI 4-pin AMP Connector Pinout Pin Pin 2 Pin 3 Pin 4 2x4 AMP (A) U DC _A U DC _B GND GND 2x4 AMP (B) DI-B DI-A GND U DC2 34 Danfoss October 208 AX2846688990en-0000

Installation PVEM 4-pin DIN Connector Pinout Pin Pin 2 Pin 3 Pin 4 x4 DIN U DC U S Error GND PVEO, PVEO-R and PVEO-HP 4-pin Connector Pinout Pin Pin 2 Pin 3 Pin 4 x4 AMP U DC _A U DC _B GND GND x4 DEUTSCH U DC _A GND GND U DC _B x4 DIN U DC _A U DC _B - GND PVEA/PVEH/PVES Pinout Pin Pin 2 Pin 3 Pin 4 x4 AMP U S U DC GND Error x4 DEUTSCH U S Error GND U DC x4 DIN U DC U S Error GND PVEA-DI and PVEH-DI 4-pin Connector Pinout Pin Pin 2 Pin 3 Pin 4 2x4 AMP (A) U S U DC GND Error 2x4 AMP (B) DI-A DI-B GND U DC2 2x4 DEUTSCH (A) U S Error GND U DC 2x4 DEUTSCH (B) U DC2 GND DI-A DI-B PVEH-FLA 6-pin Connector Pinout Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 x6 AMP U S U DC GND Error Float - PVEH-SP and PVES-SP 6-pin Connector Pinout Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 x6 DEUTSCH U S Error - SP GND U DC PVE series 7 for PVG 32 operating conditions The PVE products work under the specific conditions detailed in the table below. Description Type Value Pilot Pressure Nominal 3.5 bar [96 psi] Minimum 0.0 bar [45 psi] Maximum 5.0 bar [28 psi] Oil Consumption Neutral 0.04 l/min [0.0 US gal/min] Locked Position 0.04 l/min [0.0 US gal/min] Actuating 0.6 l/min [0.6 US gal/min] Storage Temperature Ambient -50 to +90 C [-58 to +94 F] Operating Temperature Ambient -40 to +90 C [-40 to +94 F] Danfoss October 208 AX2846688990en-0000 35

Installation Description Type Value Oil Viscosity Operating Range 2 75 cst [65 347 SUS] Minimum 4 cst [39 SUS] Maximum 460 cst [228 SUS] Oil Cleanliness Maximum 8/6/3 (according to ISO 4406) PVE series 7 for PVG 32 control specifications The tables below detail the control specifications for PVEO, PVEM, PVEA/PVEH/PVES. PVEO control specification Supply Voltage (UDC) Rated 2 VDC 24 VDC Range 5 VDC 22 30 VDC Max. ripple 5 % PVEM control specification Supply Voltage (UDC) Rated/Range 32 VDC Max. ripple 5% Signal Voltage (US) Neutral US = 0.5 UDC Q: P A US = (0.5 0.25) UDC Q: P B US = (0.5 0.75) UDC Signal Voltage PWM (US) neutral US = 50% DUT Q: P A US = 50% 25% DUT Q: P B US = 50% 75% DUT PWM Frequency (US) Recommended > 200 Hz Input Impedance Rated 2 kω Input Capacitance Rated 00 nf PVEA/PVEH/PVES control specification Supply Voltage (UDC) Rated/Range 32 VDC Max. ripple 5% Signal Voltage (US) Neutral US = 0.5 UDC Q: P A US = (0.5 0.25) UDC Q: P B US = (0.5 0.75) UDC Signal Voltage PWM (US) neutral US = 50% DUT Q: P A US = 50% 25% DUT Q: P B US = 50% 75% DUT PWM Frequency (U S) Recommended > 000 Hz Input Impedance Rated 2 kω Input Capacitance Rated 00 nf PVE series 7 for PVG 32 LED characteristics The LED provided on the PVE products can tell the user if the product is operating correctly or not. PVEO LED characteristics Color LED view Function Green Power ON 36 Danfoss October 208 AX2846688990en-0000

Installation PVEM/PVEA/PVEH/PVES LED characteristics Green Green @.5 Hz Red Red @.5 Hz Operating Neutral - Power Save Internal fault External or Float fault PVEH-U/PVES-U LED characteristics Green Green @.5 Hz Red Red @.5 Hz Yellow Operating Neutral - Power Save Internal fault External or Float fault Disable Mode Danfoss October 208 AX2846688990en-0000 37

Installation PVHC for PVG 32 installation The seal in the PVHC connector and the seals for individual conductors are crucial for correctly sealing the connector. PVHC for PVG 32 5 [0.20] 8 ± 0.5 Nm [70 ± 4.4 lbf in] PVHC for PVG 32 connector DEUTSCH (left) and AMP (right) connectors U DC (B) U DC (A) DC (B) DC (A) U U Parameter Control range 2 V 24 V Current - 500 ma 0-750 ma Pressure control range 5 to 5 bar [72.5 to 27.5 psi] PVHC for PVG 32 technical data Description Value Controller output current range 2 V 0 500 ma 24 V 0 750 ma Coil resistance 2 V 4.72 Ω ± 5% 24 V 20.8 Ω ± 5% Pilot pressure (over tank) * Nominal 25 bar [363 psi] Minimum 2 bar [305 psi] Maximum 25 bar [363 psi] Control pressure Range 5-5 bar [72.5-27.5 psi] 38 Danfoss October 208 AX2846688990en-0000

Installation Description Value Maximum tank pressure Port T Static 25 bar [363 psi] Port T Dynamic 30 bar [435 psi] Temperature range Ambient -30 C to 80 C [-22 to 76 F] Medium -20 C to 80 C [-4 to 76 F] Oil viscosity Range 2 to 75 mm2/s [65 to 347 SUS] Minimum Maximum Enclosure Protection class DEUTSCH DT IP 67 Filtering in the hydraulic system; Max. permissible degree of contamination * Designed to be used with hydraulic activated spools AMP JPT IP 66 23/9/6 (ISO 4406, 999 version) 4 mm2/s [39 SUS] 400 mm2/s [230 SUS] The PVHC is produced in an environment using mineral based hydraulic oil. Danfoss October 208 AX2846688990en-0000 39

Installation Standard main spool assembly PVG 32 main spool assembly installation Friction Detent Mec.Float A-Port 2[0.47] 8±Nm [7±9lbf-in] Mec.Float B-Port Standard Standard DETENT (NO SPRING) Standard FLOAT A FLOAT B PVM [0.43] 8±Nm [7±9lbf-in] PVML 8±Nm [7±9lbf-in] 40 Danfoss October 208 AX2846688990en-0000

xxxxxx Service and Parts Manual Installation PVG 28/256 installation Oil flow direction for standard assembled groups Standard assembled PVG 28/256 Flow: P A PVM PVM C PVSI xxxxxxxx xxxxxxxx D PVPV xxxx PVEH, PVEH-U, PVEH-FLA PVB28 PVB256 PVEO PVHC PVH PVMD P006 089 Identification C D PVG - number, week and year of installation and series number PVP - pressure setting Engraved part number on PVPV, PVB and PVSI Danfoss October 208 AX2846688990en-0000 4

Installation Installation and plug orientation PVG 28/256 plug orientation L 345 [4.6]* 345 [3.6]* 4 x M2 x 8 PVP/PVGI Max. 60 Nm [530 lbf in] 32 [5.2] 20 [4.7]* 20 [4.7]* In particularly exposed applications, protection in the form of screening of the electrical actuator is recommended * Room for dismantling PVB 28 2 3 4 5 6 7 8 9 L (mm) 98.5 64.5 230.5 296.5 362.5 428.5 494.5 560.5 626.5 L (in) 3.88 6.48 9.07.67 4.27 6.87 9.47 22.07 24.67 PVB 256 2 3 4 5 6 7 L (mm) 8.5 204.5 290.5 376.5 462.5 548.5 634.5 L (in) 4.67 8.05.44 4.82 8.2 2.59 24.98 42 Danfoss October 208 AX2846688990en-0000

Installation PVG 28/256 pump side module Pump side and max flow setting Flow: P A Max. flow: P B 8 ±2 N m [59 ±8 lbf in] Max. flow: P A 8 ±2 N m [59 ±8 lbf in] Danfoss October 208 AX2846688990en-0000 43

Installation PVG 28/256 pressure setting Pressure setting LS A, LS B C C C C LSA LSA C C LS B 4 [0.6] C C LS B C-C 360º ~20 bar [740 psi] Relief valve LS A/B T P006094 Rated pressure Product PVG 28 with PVSI PVG 256 w PVSI Rated Pressure 350 bar [5076 psi] 350 bar [5076 psi] 44 Danfoss October 208 AX2846688990en-0000

30 30 Service and Parts Manual Installation PVG 28/256 installation of lever The lever must be screwed in completely. PVM lever PVM Standard 30 PVM with float 37 30 30 30 37 Danfoss October 208 AX2846688990en-0000 45

Installation PVE 28/256 PVE series 7 installation PVEO Series 7 PVEH/H-U/H-FLA Series 7 5 [0.2] 8 ±0.5 N m [70 ±4.4 lbf in] P006095 W Warning For safety reasons, the PVE actuator and interface components must be considered as one unit. Do not try to disassemble under any circumstances. PVG 28/256 PVE connector variants x4 DEUTSCH x6 DEUTSCH x4 DIN 2 3 4 3 4 2 5 6 2 3 4 Pin Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 PVEO x4 DEUTSCH Udc_A GND GND Udc_B PVEH PVEH-U x4 DIN Udc_A Udc_B GND x4 DEUTSCH Us Error GND Udc x4 DIN Udc Us Error GND PVEH-FLA x6 DEUTSCH Us Error Float GND Udc PVG 28/256 PVE control specifications PVEO control specifications Control specification PVEO Supply Voltage (Udc) Rated 2 Vdc 24 Vdc Range 5 Vdc 22 30 Vdc Max. ripple 5% 5% 46 Danfoss October 208 AX2846688990en-0000

Installation PVEH/H-FLA and PVEH-U control specifications Control specification PVEH/H-FLA PVEH-U Supply Voltage (Udc) Rated/Range 32 Vdc 32 Vdc Max. ripple 5% 5% Signal Voltage (Us) Neutral Us = 0.5 Udc Us = 5 V Q: P A Us = (0.5 0.25) Udc Us = 5 V 2.5 V Q: P B Us = (0.5 0.75) Udc Us = 5 V 7.5 V Signal Voltage PWM (Us) Neutral Us = 50% DUT Q: P A Us = 50% 25% DUT Q: P B Us = 50% 75% DUT PWM Frequency (Us) Recommended >000 Hz Input Impedance Rated 2 kω Input Capacitance Rated 00 nf PVG 28/256 PVE operating conditions PVEO, PVEH/H-U/H-FLA Operating Conditions Pilot Pressure Nominal 3.5 bar [96 psi] Minimum 0.0 bar [45 psi] Maximum 5.0 bar [220 psi] Storage Temperature Ambient -50 C 90 C [-58 F 94 F] Operating Temperature Ambient -40 C 90 C [-40 F 94 F] Oil Viscosity Operating range 2 75 cst [65 347 SUS] Minimum 4 cst [39 SUS] Maximum 460 cst [228 SUS] Oil Cleanliness Maximum Maximum PVG 28/256 PVE LED characteristics PVEO LED characteristics Color LED view Function Green Power ON PVEH/H-FLA LED characteristics Color LED view Function Green Operating Green @.5 Hz Red Red @.5 Hz Neutral - Power Save Internal fault External or Float fault PVEH-U LED characteristics Color LED view Funtion Green Operating Green @.5 Hz Neutral - Power Save Danfoss October 208 AX2846688990en-0000 47

Installation PVEH-U LED characteristics (continued) Color LED view Funtion Red Internal fault Red @.5 Hz External or Float fault Yellow Disable mode 48 Danfoss October 208 AX2846688990en-0000

Installation PVHC for PVG 28/256 installation 5 [0.2] 8 ± 0.5 N m [70 ± 4.4 lbf in] PVHC for PVG 28/256 connector The seal in the PVHC connector and the seals for individual conductors are crucial for correctly sealing the connector. DEUTSCH Version AMP Version (B) Udc (B) Udc (A) Udc (A) Udc PVHC for PVG 28/256 technical data Controller output current range 2 V - 500 ma 24 V 0-750 ma Coil resistance 2 V 4.72 Ω ± 5% 24 V 20.8 Ω ± 5% Pilot pressure (over tank) * Nominal 25 bar [363 psi] Minimum 2 bar [305 psi] Maximum 25 bar [363 psi] Control pressure Range 5-5 bar [72.5-27.5 psi] Max. tank pressure Port T Static 25 bar [363 psi] Port T Dynamic 30 bar [435 psi] Temperature range Ambient -30 C 80 C [-22 F 76 F] Medium -20 C 80 C [-4 F 76 F] Oil viscosity Operating range 2 75 mm2/s [65 347 SUS] Minimum 4 mm 2 /s [39 SUS] Maximum 400 mm 2 /s [230 SUS] Danfoss October 208 AX2846688990en-0000 49

Installation Enclosure - Protection class DEUTSCH DT IP 67 Filtering in the hydraulic system; Max. permissible degree of contamination * Designed to be used with hydraulic activated spools AMP JPT 2/24 V IP 66 23/9/6 (ISO 4406, 999 version) 50 Danfoss October 208 AX2846688990en-0000

Installation PVG 28/256 main spool assembly installation Standard spools for PVE and PVH/PVHC Spool for PVE Spool for PVH/PVHC 6±2Nm [4±8lbf-in] 6±2Nm [4±8lbf-in] Same tightening torque for PVE and PVH/PVHC spools Danfoss October 208 AX2846688990en-0000 5

PVG acronyms found in service parts These acronyms appear in the service parts list. PVG (Proportional Valve Group) acronyms PPRV PVAS PVB PVBD PVBE PVBO PVBS PVBSO PVBZ PVDI PVE PVEA PVED PVEH PVEO PVES PVGI PVH PVHC PVLA PVLP PVM PVMD PVMF PVMR PVP PVPC PVPD PVPE PVPF PVPH PVPP PVPV PVPV/M PVPVP PVPX, LS PVS PVSI PVSKM PVSP/PVSPM PVT PVTI Pilot Pressure Reduction Valve Assembly (Tie Rod) Kit Basic Module (Body) Diverter Module for PVB/PVBZ Basic End Module (Body) Basic Open-Ended Module (Body) Main Spool for PVB Main Spool for PVBO Basic Module (Body) Zero Leak Directional Indicator Electrical Actuator Electrical Actuator-Fine Proportional Electrical Actuator-Digital Electrical Actuator-High Proportional Electrical Actuator-ON/OFF Electrical Actuator-Super Proportional Interface Module Cover for Hydraulic Actuation Electrical Actuator-High Current Anti-Cavitation Valve Shock Valve Mechanical Actuator Cover for Mechanical Activation Cover for Mechanical Float Cover for Friction Detent Pump Side Module (Inlet) Plug for external pilot oil supply Open Center PVPF Dummy Spool Electrical Unloading Valve for PVPF Open Center PVP Hydraulic Unloading Valve for PVPF Electrical Pilot Shut-Off Valve Closed Center PVP without Pressure Adjustment Spool Pump side module Closed Center PVP with Priority LS Unloading valve End Plate (Aluminum) End Plate (Cast Iron) Full Flow Cut-Off Module Priority Module Tank Side Module Interface Module 52 Danfoss October 208 AX2846688990en-0000

PVG 6 service parts PVP exploded view PVG 6 pump side module PVP 2 3 4 6[0.24] 30±3Nm [266±27lbf-in] 5 6 5±0.5Nm [44±4.4lbf-in] 6 5±0.5Nm [44±4.4lbf-in] 5±0.5Nm [44±4.4lbf-in] 2 8 9 4[0.6] 8±Nm [7±9lbf-in] 7 Closed Center 7 6 2.5[.0] 4±Nm [35±9lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] Open center 0 3 6[0.24] 30±3Nm [266±27lbf-in] 3[0.2] 4±Nm [35±9lbf-in] 5 4 PVP kits Description Code number P-port T-port/HPCO-port Letter Open center 57B5000 G/2 G3/4 A 57B500 G3/4 57B5200 7/8-4 UNF -/6 UN 57B5300 -/6 UN Open center with PVPX facility 57B502 G3/4 G3/4 B Open center with PPRV for PVE 57B500 G/2 G3/4 C 57B50 G3/4 008849 57B520 7/8-4 UNF -/6 UN 57B530 -/6-2 UNF -/6-2 UNF Open center with PPRV for PVE and PVPX facility 57B502 G/2 G3/4 D 87356 57B52 G3/4 G3/4 57B522 7/8-4 UNF -/6 UN 57B532 -/6-2 UNF -/6-2 UNF Danfoss October 208 AX2846688990en-0000 53

PVP kits (continued) Description Code number P-port T-port/HPCO-port Letter Open center with PPRV for PVE and pilot oil pressure take-off Open center with PPRV for PVH/PVHC and pilot oil pressure take-off 57B580 G3/4 G3/4 E 57B5380 -/6-2 UNF -/6-2 UNF 57B590 G3/4 G3/4 F 57B5390 -/6-2 UNF -/6-2 UNF 00885 G3/4 G3/4 Closed center 57B500 G/2 G3/4 G 57B50 G3/4 57B520 7/8-4 UNF -/6 UN 57B530 -/6 UN Closed center with PVPX facility 57B503 G3/4 G3/4 H Closed Center with PPRV for PVE 57B50 G/2 G3/4 I 57B5 G3/4 57B52 7/8-4 UNF -/6 UN 57B53 -/6 UN Closed center with PPRV for PVE and PVPX facility 57B503 G/2 G3/4 J Closed center with PPRV for PVE and pilot oil pressure take-off Closed center with PPRV for PVH/PVHC and pilot oil pressure take-off 57B53 G3/4 57B523 7/8-4 UNF -/6 UN 57B533 -/6-2 UNF -/6-2 UNF 57B58 G3/4 G3/4 K 57B538 -/6-2 UNF -/6-2 UNF 57B59 G3/4 G3/4 L 57B539 -/6-2 UNF -/6-2 UNF PVP parts list Item Description Code number Letter A B C D E F G H I J K L Service tool for relief valve 55L6494 - - - - - - - - - - - - 2 Sealed adjusting screw (for sealing with a wire) 3 Sealed plastic plug, black (50 pcs.) Sealed plastic plug, yellow (50 pcs.) 55L6489 - - - - - - - - - - - - 55L668 55L667 - - - - - - - - - - - - 4 Pilot supply for PVE 3.5 bar 55L557 - - - - - - 4 Pilot supply for PVH/PVHC 25 bar 077272 - - - - - - - - - - 5 Relief valve 55L6495 6 Plastic plug for G/2-2 2 2 2 2 2 2 2 2 2 2 2 Plastic plug for 7/8-4 UNF - Plastic plug for G3/4 - Plastic plug for -/6-2 UNF - 7 N/A (See PVP for PVG32) - - - - - - - - - - - - - 8 Conversion kit open to closed and closed to open center 9 Orifice Ø.0, bonded seal and plug for closed center 55L552 - - - - - - - - - - - - - - - - - - - 54 Danfoss October 208 AX2846688990en-0000

PVP parts list (continued) Item Description Code number Letter A B C D E F G H I J K L 0 Plug M6 for open center 55L553 - - - - - - Plug with O-ring - 2 2 2 2 3 3 2 2 2 2 3 3 2 N/A (See PVP for PVG32) - - - - - - - - - - - - - 3 Inlet compensator assembly - 4 Plastic plug - 5 Locking pin - 6 Orifice M6 Ø.0-7 PVP inlet module - Danfoss October 208 AX2846688990en-0000 55

PVPV exploded view PVG 6 pump side module PVPV 6 5±0.5Nm [44±4.4lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] 5 4 3 6[0.24] 30±3Nm [266±27lbf-in] 7 8 2 7 3[0.5] 35±3Nm [30±27lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] PVPV kits Description Code number P-port T-port Letter Closed center with PPRV for PVH/PVHC 57B596 5/6-2 UN 5/6-2 UN A Closed center with PPRV for PVE 57B59 5/6-2 UN 5/6-2 UN B 57B5938 G G Closed center with PPRV for PVH/PVHC and PVLP 008856 G G C 05803 5/6-2 UN 5/6-2 UN Closed center with PPRV for PVE and PVLP 57B593 5/6-2 UN 5/6-2 UN D 57B594 G G PVPV parts list Item Description Code number Letter A B C D PVLP assembly See PVLP section - - 2 Plug for PVLP 57B2002 - - 3 Plug - 4 Pilot supply for PVE 3.5 bar 55L557 - - Pilot supply for PVH/PVHC 25 bar 077272 - - 5 Plug for external Pp 038675 - - - - 6 Plastic plug - 2 2 2 2 7 Plug - 2 2 2 2 8 PVPV inlet module - 56 Danfoss October 208 AX2846688990en-0000

PVPX exploded view PVG 6/32 electrical LS pressure unloading valve, PVPX 24[0.94] 45+5Nm [398+44lbf-in] 2 24[0.94] 45+5Nm [398+44lbf-in] 3 24[0.94] 45+5Nm [398+44lbf-in] 4 24[0.94] 45+5Nm [398+44lbf-in] PVPX plug Description Manual Override Item Code number Plug for PVPX port - 57B560 PVPX, NO configuration x2 DIN (2 Vdc) - 2 57B4236 x2 DIN (24 Vdc) - 57B4238 x2 AMP (2 Vdc) - 4 57B498 x2 AMP (24 Vdc) - 57B4982 x2 DEUTSCH (2 Vdc) - 3 80766 x2 DEUTSCH (24 Vdc) - 80767 Danfoss October 208 AX2846688990en-0000 57

PVPX, NC configuration x2 DIN (2 Vdc) - 2 57B4246 x2 DIN (24 Vdc) - 57B4248 x2 DIN (26 Vdc) - 57B4976 x2 AMP (2 Vdc) - 4 57B4983 x2 AMP (24 Vdc) - 57B4984 x2 DEUTSCH (2 Vdc) - 3 80768 x2 DEUTSCH - 80769 PVPX, NOMO configuration x2 DIN (2 Vdc) PUSH 2 57B4256 x2 DIN (2 Vdc) PUSH & TURN 57B4257 x2 DIN (24 Vdc) PUSH 57B4258 x2 DIN (24 Vdc) PUSH & TURN 57B4259 x2 DIN (26 Vdc) PUSH 57B4260 x2 AMP (2 Vdc) PUSH 4 57B4985 x2 AMP (24 Vdc) PUSH 57B4986 58 Danfoss October 208 AX2846688990en-0000

PVG 6 PVB with LS, basic module PVB with LS exploded view 3 4 5 2 6 7 8 8 6[0.24] 30±3Nm [266±27lbf-in] PVB with LS kits Description Code number A-port B-port Letter Compensated PVB 30976 3/8 BSP 3/8 BSP A 30977 3/4-6 UNF 3/4-6 UNF Compensated PVB with LS 30982 3/8 BSP 3/8 BSP B 30983 3/4-6 UNF 3/4-6 UNF Non-Compensated PVB 042 3/8 BSP 3/8 BSP C 06797 3/4-6 UNF 3/4-6 UNF Non-Compensated PVB with check valve 0680 3/8 BSP 3/8 BSP D 0423 3/4-6 UNF 3/4-6 UNF PVB with LS parts list Item Description Code number Letter A B C D PVB Basic module - 2 Relief valve 55L6495 - - - 3 Service tool for relief valve 55L6494 - - - - Danfoss October 208 AX2846688990en-0000 59

PVB with LS parts list (continued) Item Description Code number Letter A B C D 4 Sealed adjusting screw (for sealing with a wire) 55L6489 - - - - 5 Sealed plastic plug, black (50 pcs.) 55L668 Sealed plastic plug, yellow (50 pcs.) 55L667 - - - - 6 Shuttle disc assembly - 7 Compensator assembly - - - 8 Locking pin - - - 60 Danfoss October 208 AX2846688990en-0000

PVB with PVLP/PVLA exploded view PVG 6 PVB with PVLP/PVLA, basic module 2 4 3[0.5] 35±3Nm [30±27lbf-in] 3 4 3[0.5] 35±3Nm [30±27lbf-in] 5 6 7 8 6[0.24] 30±3Nm [266±27lbf-in] PVB with PVLP/PVLA kits Description Code number A-port B-port Letter Compensated PVB 30976 3/8 BSP 3/8 BSP A 30977 3/4-6 UNF 3/4-6 UNF Compensated PVB with PVLP/PVLA 30978 3/8 BSP 3/8 BSP B 30979 3/4-6 UNF 3/4-6 UNF Non-Compensated PVB 042 3/8 BSP 3/8 BSP C 06797 3/4-6 UNF 3/4-6 UNF Non-Compensated PVB with check valve 0680 3/8 BSP 3/8 BSP D 0423 3/4-6 UNF 3/4-6 UNF Non-Compensated PVB with PVLP/PVLA 06754 3/8 BSP 3/8 BSP E 06755 3/4-6 UNF 3/4-6 UNF Danfoss October 208 AX2846688990en-0000 6

PVB with PVLP/PVLA kits (continued) Description Code number A-port B-port Letter Non-Compensated PVB with check valve and PVLP/PVLA 0424 3/8 BSP 3/8 BSP F 0425 3/4-6 UNF 3/4-6 UNF PVB with PVLP/PVLA parts list Item Description Code number Letter A B C D E F PVB basic module - 2 PVLA See PVLP/PVLA - 2 - - 2 2 3 PVLP See PVLP/PVLA - 2 - - 2 2 4 Plug for PVLP/PVLA 57B2002-2 - - 2 2 5 Shuttle disc assembly - 6 Compensator assembly - - - - - 7 Locking pin - - - - - 62 Danfoss October 208 AX2846688990en-0000

PVLP Shock and PVLA, Suction Valves 35±3 Nm [30±27 lbf in] 3 [0.50] 35±3 Nm 2 [30±27 lbf in] 3 [0.50] Type Part number PVLP/PVLA PVLA 57B200 PVLP 57B2032 57B2050 57B2063 57B2080 57B200 57B225 57B240 57B250 57B260 57B275 57B290 57B220 57B2230 57B2240 57B2250 57B2265 57B2280 57B2300 57B2320 57B2350 57B2380 Plug 57B2002 Part number: 57B2230 Danfoss October 208 AX2846688990en-0000 63

PVBS exploded view PVG 6 PVBS, main spool 8±Nm 8±Nm PVG 6 PVBS part numbers PVBS Symmetrical main spools code numbers Description Code number according to flow in l/min [US gal/min] 5 [.32] 0 [2.64] 25 [6.60] 40 [0.57] 65 [7.7] Open neutral, use with PVE 05537 05538 05539 05540 0554 Open neutral, use with PVH 09637 09638 09639 09640 0964 Closed neutral, use with PVE 05532 05533 05534 05535 05536 Closed neutral, use with PVH 09632 09633 09634 09635 09636 PVBS Asymmetrical main spools code numbers Description Code number according to flow in l/min [US gal/min] 5/2.5 [.32/0.66] 0/5 [2.64/.32] 25/0 [6.60/2.64] 25/5 [6.60/3.96] 40/5 [0.57/3.96] 40/25 [0.57/6.60] Cylinder ratio 2.0 2.0 2.5.6 2.7.6 Closed neutral, use with PVE 09642 09643 09644 09645 09646 09647 Closed neutral, use with PVH 46752 46753 46754 46755 46756 46757 For more PVG 6 PVBS part numbers, please see PVG 6 Technical Information. 64 Danfoss October 208 AX2846688990en-0000

PVM exploded view PVG 6 PVM mechanical activation 2 6 0[0.40] 6±Nm [53±9lbf-in] 4[0.2] 2.5±Nm [22±9lbf-in] 5 3 4 3[0.2] 5[0.20] 8±0.5Nm [70±4.5lbf-in] 3[0.5] 8±Nm [70±9lbf-in] PVM kits Description Code number Letter Non-adjustable 07505 A Non-adjustable with float 07506 B Non-adjustable with lever base and lever 07333 C Non-adjustable with float, lever base and lever 07335 D Adjustable 07507 E Adjustable with lever base and lever 07332 F PVM parts list Item Description Code number Letter A B C D E F PVM - 2 Seal kit 57B3999 3 Lever base 06464 - - - 4 Lever with black knob 077262 - - - 5 Lever base and lever with black knob 07587 - - - Lever base and lever with red knob 34809 - - - - - - 6 Screw M6x5-4 4 4 4 4 4 Danfoss October 208 AX2846688990en-0000 65

PVG 6 PVMD cover PVMD exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVMD kit Description Code number Cover for mechanical activation 0558 PVMD parts list Item Description Screw M6x5 (4 pcs.) 2 Seal kit 66 Danfoss October 208 AX2846688990en-0000

PVG 6 PVH hydraulic actuation PVH exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVH kits Description Code number G/4 BSP 08380 9/6-8 UNF 0838 Item Description Screw M6x5 (4 pcs.) 2 Seal kit Danfoss October 208 AX2846688990en-0000 67

PVHC exploded view PVG 6 PVHC high current actuation 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 4 [0.6] 3 Nm [26.5 lbf in] 3 2 PVHC kits Description Code number Letter 2x2 DEUTSCH (2 V) 2694 A 2x2 DEUTSCH (24 V) 27535 B PVHC parts list Item Description Code number Letter A B Screw 55L499 4 4 2 Solenoid valve 2 V - 2 - Solenoid valve 24 V - - 2 3 Seal kit 3365 68 Danfoss October 208 AX2846688990en-0000

PVG 6 PVE S6 PVEO on/off actuator PVEO 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEO kits Type Description Code number PVEO x4 DEUTSCH (2 Vdc) 06793 x4 DEUTSCH (24 Vdc) 06794 PVEO-CI x4 DEUTSCH (J939/ISObus) 24002 x4 DEUTSCH (CANopen) 49443 PVEO parts list Item Description Code number Amount Screw kit 55L499 2 Seal kit 3365 Danfoss October 208 AX2846688990en-0000 69

PVG 6 PVE S6 PVEA, proportional actuator PVEA 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 Type Description Code number PVEA x4 DEUTSCH 03692 PVEA-F x4 DEUTSCH (Float B-port) 06795 PVEA-CI x4 DEUTSCH (J939/ISObus) 2945 x4 DEUTSCH (CANopen) 49437 Item Description Code number Amount Screw kit 55L499 2 Seal kit 3365 70 Danfoss October 208 AX2846688990en-0000

PVG 6/32 PVS/PVSI end plates PVS/PVSI exploded view 2 5±0.5Nm [44±4.4lbf-in] PVSI with P, T, LX, and M connection exploded view 3 4 4±0.5Nm [35±4.4lbf-in] 5 5±0.5Nm [44±4.4lbf-in] 4±0.5Nm [35±4.4lbf-in] 6 4 PVST with T connection exploded view 8 5±0.5Nm [44±4.4lbf-in] 7 9 6[0.24] 30±3Nm [266±27lbf-in] PVS/PVSI kits Type Description Mounting Code number Letter PVS (Aluminum) End plate M8 57B2000 A 5/6-8 UNC 57B2020 End plate with LX-connection M8 57B20 B 5/6-8 UNC 57B202 Danfoss October 208 AX2846688990en-0000 7

PVS/PVSI kits (continued) Type Description Mounting Code number Letter PVSI (Cast iron) End plate 5/6-8 UNC 57B2004 C M8 57B204 End plate with LX-connection 5/6-8 UNC 57B2005 D M8 57B205 57B290 End plate with P-,T-, LX- and M-connection M8 57B2920 E PVST (Steel) End plate with T-connection M8 57B2500 F 5/6-8 UNC 57B2520 Item Description Code number Letter A B C D E F PVS/PVSI End plate with LX-connection - - - - - 2 Plastic plug - - - - - 3 PVSI with P-, T-, LX- and M-connection - - - - - - 4 Plastic plug - - - - - 2-5 Plastic plug - - - - - - 6 Plastic plug - - - - - - 7 PVST with T-connection - - - - - - 8 Plastic plug - - - - - - 9 Plug with O-ring - - - - - - 72 Danfoss October 208 AX2846688990en-0000

PVAS exploded view PVG 6/32 PVAS stay bolts Item Description Code number Set of seals for 7 work sections: PVB 6/32 56335 For PVAS part numbers, refer to the relevant Technical Information document. Danfoss October 208 AX2846688990en-0000 73

PVG 6 seal kits Seal kits for PVG 6 Type Description Code number PVP/PVPV/PVPVM Module 57B5999 PVB Module 57B6999 PVM/PVH/PVMD Module 57B3999 PVEO/PVEA/PVEO-CI/PVEA-CI/PVHC Module 3365 Seal kit for one work section For a PVG 6 with PVB-section 57B8999 Seal kit for seven work sections For a PVG 6 with 7 PVB-section 56335 PVPX Module 57B5996 PVPX Module before 996 57B4998 74 Danfoss October 208 AX2846688990en-0000

PVG 32 service parts PVP exploded view PVG 32 pump side module, PVP 2 3 4 6[0.24] 30±3Nm [266±27lbf-in] 5 6 5±0.5Nm [44±4.4lbf-in] 6 5±0.5Nm [44±4.4lbf-in] 5±0.5Nm [44±4.4lbf-in] 2 8 9 4[0.6] 8±Nm [7±9lbf-in] 7 Closed Center 7 6 2.5[.0] 4±Nm [35±9lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] Open center 0 3 6[0.24] 30±3Nm [266±27lbf-in] 3[0.2] 4±Nm [35±9lbf-in] 5 4 PVP kits Description Code number P port T/HPCO port Letter Open center 57B5000 G/2 G3/4 A 57B500 G3/4 57B5200 7/8-4 UNF -/6 UN 57B5300 -/6 UN Open center with PVPX facility 57B502 G3/4 G3/4 B Open center with PPRV for PVE 57B500 G/2 G3/4 C Open center with PPRV for PVE and T0 facility and pilot oil pressure take-off 57B50 008849 G3/4 57B520 7/8-4 UNF -/6 UN 57B530 -/6-2 UNF -/6-2 UNF 07295 M27x2.0 M27x2.0 D 57B530 G3/4 G3/4 57B5330 -/6-2 UNF -/6-2 UNF 57B5964 M22x.5 M22x.5 Danfoss October 208 AX2846688990en-0000 75

PVP kits (continued) Description Code number P port T/HPCO port Letter Open center with PPRV for PVE, T0 and HPCO facility Open center with PPRV for PVE, T0, HPCO and PVPX facility and pilot oil pressure takeoff Open center with PPRV for PVE and PVPX facility Open center with PPRV for PVE and PVPX and T0 facility and pilot oil pressure take-off Open center with PPRV for PVE and pilot oil pressure take-off Open center with PPRV for PVH/PVHC and pilot oil pressure take-off Open center with PPRV for PVH/PVHC and PVPX facility 57B540 G3/4 G3/4 E 57B5340 -/6-2 UNF -/6-2 UNF 57B596 M27x2.0 M27x2.0 57B5965 M22x.5 M22x.5 57B542 G3/4 G3/4 F 57B5342 -/6-2 UNF -/6-2 UNF 57B502 G/2 G3/4 G 87356 57B52 G3/4 G3/4 57B522 7/8-4 UNF -/6 UN 57B532 -/6-2 UNF -/6-2 UNF 57B532 G3/4 G3/4 H 57B5332 -/6-2 UNF -/6-2 UNF 57B580 G3/4 G3/4 I 57B5380 -/6-2 UNF -/6-2 UNF 57B590 G3/4 G3/4 J 57B5390 -/6-2 UNF -/6-2 UNF 00885 G3/4 G3/4 066027 G3/4 G3/4 K Closed center 57B500 G/2 G3/4 L 57B50 G3/4 57B520 7/8-4 UNF -/6 UN 57B530 -/6 UN Closed center with PVPX facility 57B503 G3/4 G3/4 M Closed Center with PPRV for PVE 57B50 G/2 G3/4 N Closed Center with PPRV for PVE and T0 facility and pilot oil pressure take-off Closed center with PPRV for PVE and PVPX facility Closed center with PPRV for PVE, T0 and PVPX facility and pilot oil pressure take-off Closed center with PPRV for PVE and pilot oil pressure take-off Closed center with PPRV for PVH/PVHC and T0 facility Closed center with PPRV for PVH/PVHC and pilot oil pressure take-off 57B5 G3/4 57B52 7/8-4 UNF -/6 UN 57B53 -/6 UN 57B53 G3/4 G3/4 O 57B533 -/6-2 UNF -/6-2 UNF 57B503 G/2 G3/4 P 57B53 G3/4 57B523 7/8-4 UNF -/6 UN 57B533 -/6-2 UNF -/6-2 UNF 57B533 G3/4 G3/4 Q 57B5333 -/6-2 UNF -/6-2 UNF 57B58 G3/4 G3/4 R 57B538 -/6-2 UNF -/6-2 UNF 05802 -/6-2 UNF -/6-2 UNF S 57B59 G3/4 G3/4 T 57B539 -/6-2 UNF -/6-2 UNF 76 Danfoss October 208 AX2846688990en-0000

PVP parts list Item Description Code number Letter A B C D E F G H I J Relief valve service tool 55L6494 - - - - - - - - - - 2 Sealed adjusting screw 55L6489 - - - - - - - - - - 3 Plastic plug (black) 55L668 50 50 50 50 50 50 50 50 50 50 4 Pilot supply for PVE (3.5 bar) 55L557 - - - 4 Pilot supply for PVH/PVHC (25 bar) 077272 - - - - - - - - - 5 Relief valve 55L6495 6 Plastic plug - 2 2 2 2 2 2 2 2 2 2 7 T0 plug - - - - - - - - - - 8 Conversion kit (open closed, closed open) 9 Orifice Ø.0, bonded seal and plug for closed center 55L552 - - - - - - - - - - - - - - - - - - - - - 0 M6 plug for open center 55L553 Plug with O-ring - 2 2 2 3 2 3 2 3 3 3 2 Plastic plug - - - - - - - 3 Inlet compensator assembly - 4 Plastic plug - 5 Locking pin - 6 Orifice M6 Ø.0-7 PVP inlet module - Item Description Code number Letter K L M N O P Q R S T Relief valve service tool 55L6494 - - - - - - - - - - 2 Sealed adjusting screw 55L6489 - - - - - - - - - - 3 Plastic plug (black) 55L668 4 Pilot supply for PVE (3.5 bar) 55L557 - - - - - 4 Pilot supply for PVH/PVHC (25 bar) 077272 - - - - - - - 5 Relief valve 55L6495 50 50 50 50 50 50 50 50 50 50 6 Plastic plug - 2 2 2 2 2 2 2 2 2 2 7 T0 plug - - - - - - - - - - 8 Conversion kit (open closed, closed open) 9 Orifice Ø.0, bonded seal and plug for closed center 55L552 - - - - - - - - - - - - 0 M6 plug for open center 55L553 - - - - - - - - - Plug with O-ring - 2 2 2 2 3 2 3 3 2 3 2 Plastic plug - - - - - - - - - 3 Inlet compensator assembly - 4 Plastic plug - 5 Locking pin - 6 Orifice M6 Ø.0-7 PVP inlet module - Danfoss October 208 AX2846688990en-0000 77

PVPV exploded view PVG 32 pump side module PVPV 6 5±0.5Nm [44±4.4lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] 5 4 3 6[0.24] 30±3Nm [266±27lbf-in] 7 8 2 7 3[0.5] 35±3Nm [30±27lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] PVPV kits Description Code number P port T port Letter Closed center 067570 M27x2.0 M33x2.0 A Closed center with T0 facility 055758 M27x2.0 M27x2.0 B Closed center with PPRV for PVH/PVHC 57B596 5/6-2 UN 5/6-2 UN C Closed center with PPRV for PVE 57B59 5/6-2 UN 5/6-2 UN D Closed center with PPRV for PVE and T0 facility Closed center with PPRV for PVH/PVHC and PVLP Closed center with PPRV for PVH/PVHC and T0 facility 57B5938 G G 02350 M27x2.0 M33x2.0 57B5978 003806 M27x2.0 M27x2.0 E 008856 G G F 05803 5/6-2 UN 5/6-2 UN 57B5963 -/6-2 UNF -/6-2 UNF G Closed center with PPRV for PVE and PVLP 57B593 5/6-2 UN 5/6-2 UN H Closed center with PPRV for PVE and PVLP and T0 facility 57B594 G G 57B5948 57B5973 * * This module includes the plug for external Pp (item 5) 008854 G G I 2407 -/6-2 UNF -/6-2 UNF PVPV parts list Item Description Code number Letter A B C D E F G H I PVLP assembly See PVLP section - - - - - - 2 Plug for PVLP 57B2002 - - - - - - 78 Danfoss October 208 AX2846688990en-0000

PVPV parts list (continued) Item Description Code number Letter A B C D E F G H I 3 Plug - - - 4 Pilot suplly for PVE 3.5 bar 55L557 - - - - - Pilot suplly for PVH/PVHC 25 bar 077272 - - - - - - 5 Plug for external Pp - - - - - - - - - - 6 Plastic plug - 2 2 2 2 2 2 2 2 2 7 Plug - 2 2 2 2 2 2 2 2 2 8 PVPV inlet module Danfoss October 208 AX2846688990en-0000 79

PVPM/PVPVM exploded view PVG 32 pump side module PVPM/PVPVM 6 5±0.5Nm [44±4.4lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] 5 4 3 6[0.24] 30±3Nm [266±27lbf-in] 7 8 2 7 3[0.5] 35±3Nm 6[0.24] [30±27lbf-in] 30±3Nm [266±27lbf-in] Type Description Code number P-port T-port Letter PVPVM Closed center with PPRV for PVE 57B592 5/6-2 UN 5/6-2 UN A PVPM Closed center with PPRV for PVH/PVHC and PVLP Closed center with PPRV for PVE and PVLP Open Center/Closed Center with PVLP and T0 facility 57B5937 G G 08356 5/6-2 UN 5/6-2 UN B 57B5986* G G 57B594 5/6-2 UN 5/6-2 UN C 57B5940 G G 093682 5/6-2 UN 5/6-2 UN D 093684 G G Item Description Code number Letter A B C D PVLP assembly See PVLP section - 2 Plug for PVLP 57B2002-3 Plug - - 4 Pilot supply for PVE 3.5 bar 55L557 - - Pilot supply for PVH/PVHC 25 bar 077272 - - - 5 Plug for external Pp - - - - - 6 Plastic plug - 2 2 2 2 7 Plug - 2 2 2-8 PVPV inlet module - - 80 Danfoss October 208 AX2846688990en-0000

PVG 32 external pilot pressure adapter, PVPC PVPC exploded view 2 98[0.75] 40±3Nm [355±25lbf-in] Type Item Thread Code number PVPC without check valve G/2 57B5400 /2-20 UNF 58X000 PVPC with check valve 2 G/2 57B5600 /2-20 UNF 57B5700 Danfoss October 208 AX2846688990en-0000 83

PVG 32 basic module, PVB PVB exploded view 4 5 3[0.5] 35±3Nm [30±27lbf-in] 3 2 6 3[0.5] 35±3Nm [30±27lbf-in] 7 7 2 5±0.5Nm [44±4.4lbf-in] Pressure setting 4 Pressure setting 2 5 3 8 4 0 9 9 0[0.39] 0±Nm [88.5±9lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] PVB part kits Type Description Code number A/B-port LS A/B-port Letter Uncompensated PVB Basic module 57B6000 G/2 - A 57B6400 7/8-4 UNF - Basic module with T0 57B600 G/2-57B640 7/8-4 UNF - Basic module with PVLP/PVLA 57B6030 G/2 - B 57B6430 7/8-4 UNF - Basic module with PVLP/PVLA and LS A/B shuttle valve 07832 G/2 - C 84 Danfoss October 208 AX2846688990en-0000

PVB part kits (continued) Type Description Code number A/B-port LS A/B-port Letter Uncompensated PVB with load drop check valve Basic module 57B600 G/2 - D 57B6500 7/8-4 UNF - Basic module with T0 57B60 G/2-57B6909 7/8-4 UNF - Basic module with PVLP/PVLA 57B630 G/2 - E Basic module with PVLP/PVLA and T0 Basic module with PVLP/PVLA and LS A/B shuttle valve 57B6530 7/8-4 UNF - 57B640 G/2-57B6904 7/8-4 UNF - 57B636 G/2 - F 57B6536 7/8-4 UNF - Compensated PVB Basic module 57B6200 G/2 - G 57B6600 7/8-4 UNF - 57B6849 Machined top - Basic module with T0 57B620 G/2-57B6922 7/8-4 UNF - Basic module with PVLP/PVLA 57B6230 G/2 - H Basic module with PVLP/PVLA and T0 57B6630 7/8-4 UNF - 57B6240 G/2-57B6906 7/8-4 UNF - 57B6850 M22x.5 - Dampened compensated PVB Basic module 57B6206 G/2 - I 036629 7/8-4 UNF - Basic module with PVLP/PVLA 57B6236 G/2 - J 036630 7/8-4 UNF - Compensated PVB with LS A/B Basic module 57B6203 G/2 G/4 K 57B6603 7/8-4 UNF /2-20 UNF Basic module with T0 57B623 G/2 G/4 57B663 7/8-4 UNF /2-20 UNF Basic module with PVLP/PVLA 57B6233 G/2 G/4 L Basic module with PVLP/PVLA and T0 57B6633 7/8-4 UNF /2-20 UNF 57B6243 G/2 G/4 57B6643 7/8-4 UNF /2-20 UNF Compensated high flow PVB Basic module with T0 9463 7/8-4 UNF - M Compensated high flow PVB with LS A/B 26962 G/2 - Basic module with PVLP/PVLA 57B6852 G/2 - N Basic module with PVLP/PVLA, T0 and LS A/B shuttle 57B6938 7/8-4 UNF - 09947 7/8-4 UNF - O Basic module 57B6855 G/2 G/4 P Basic module with T0 059838 G/2 G/4 26963 7/8-4 UNF /2-20 UNF Basic module with PVLP/PVLA 57B6854 G/2 G/4 Q Basic module with PVLP/PVLA and T0 27277 7/8-4 UNF /2-20 UNF 26964 7/8-4 UNF /2-20 UNF Danfoss October 208 AX2846688990en-0000 85

PVB parts list Item Description Code number Letter A B C D E F G H I PVLP assembly See PVLP section - 2 2-2 2-2 - 2 Plug for PVLP/PVLA 57B2002-2 2-2 2-2 - 3 PVLA assembly See PVLP section - 2 2-2 2-2 - 4 Service tool for relief valve 55L6494 - - - - - - - - - 5 Sealed adjusting screw (for sealing with a wire) 6 Sealed plastic plug, black (50 pcs.) Sealed plastic plug, yellow (50 pcs.) 55L6489 - - - - - - - - - 55L668 - - - - - - - - - 55L667 - - - - - - - - - 7 Relief valve 55L6495 - - - - - - - - - 8 Compensator assembly - - - - - - - 9 Plug - - - - - - - - - - 0 Damping screw - - - - - - - - - Load drop check valve assembly - - - - - - - 2 LS shuttle valve assembly - - - - - - - - 3 Shuttle disc - 4 Plastic plug - 2 2 2 2 2 2 2 2 2 5 PVB basic module - Item Description Code number Letter J K L M N O P Q PVLP assembly See PVLP section 2-2 - 2 2-2 2 Plug for PVLP/PVLA 57B2002 2-2 - 2 2-2 3 PVLA assembly See PVLP section 2-2 - 2 2-2 4 Service tool for relief valve 55L6494 - - - - - - - - 5 Sealed adjusting screw (for sealing with a wire) 6 Sealed plastic plug, black (50 pcs.) Sealed plastic plug, yellow (50 pcs.) 55L6489 - - - - - - - - 55L668-2 2 - - - 2-55L667 - - - - - - - - 7 Relief valve 55L6495-2 2 - - - 2-8 Compensator assembly - 9 Plug - - 2 2 - - - 2-0 Damping screw - - - - - - - - Load drop check valve assembly - - - - - - - - - 2 LS shuttle valve assembly - - - - - 3 Shuttle disc - 4 Plastic plug - 2 2 2 2 2 2 2 2 5 PVB basic module - 86 Danfoss October 208 AX2846688990en-0000

Standard PVBZ exploded view PVG 32 basic module, PVBZ 5±0.5Nm [44±4.4lbf-in] 2 2 4[0.6] 20Nm [77lbf-in] 5±0.5Nm [44±4.4lbf-in] 0 3 9 5 4 6 8 7 7 6[0.24] 30±3Nm [266±27lbf-in] Type Description Code number A/B-port POC Letter Uncompensated PVBZ with POC Basic module 57B605 G/2 B-port A Basic module with LS A/B shuttle valve 57B645 7/8-4 UNF B-port 57B6969 Machined top A-port 57B6452 7/8-4 UNF A/B-port B 57B6052 G/2 A/B-port Compensated PVBZ with POC Basic module 57B625 G/2 B-port C 57B6960 7/8-4 UNF A-port 57B665 7/8-4 UNF B-port 57082 Machined top A-port 57B6252 G/2 A/B-port D 57B6652 7/8-4 UNF A/B-port Basic module with thermo relief 57B626 G/2 B-port E Basic module with thermo relief and LS A/B shuttle valve 57B666 7/8-4 UNF B-port 57B6262 G/2 A/B-port F 57B6662 7/8-4 UNF A/B-port 57B6266 G/2 A/B-port G 57B6666 7/8-4 UNF A/B-port 57B6954 m22x.5 A/B-port 57B6952 Machined top A/B-port 57B6958 Machined top A/B-port Danfoss October 208 AX2846688990en-0000 87

Type Description Code number A/B-port POC Letter Compensated high flow PVBZ with POC Basic module with LS A/B shuttle valve Basic module with PVLP/PVLA and LS A/B shuttle valve Basic module with PVLP/PVLA on B- port 57B6957 M22x.5 A/B-port H 02487 M22x.5 A/B-port 08390 G/2 A/B-port 0839 7/8-4 UNF A/B-port 57B6968 M22x.5 B-port I Item Description Code number Letter A B C D E F G H I Plastic plug - 2 2 2 2 2 2 2 2 2 2 Thermo relief valve - - - - - 2 2 2 - - 3 Pilot valve - 2 2 2 2 2 4 Shuttle disc - 5 Pilot operated check valve (POC) 6 Compensator assembly - 2 2 2 2 2 - - - 7 Plug - - - - - - - - - - 8 Locking pin - - - 9 LS shuttle valve assembly 0 Pilot operated check valve (POC) - - - - - - - - 2 2 2 2 2 88 Danfoss October 208 AX2846688990en-0000

Service and Parts Manual PVG 32 basic module PVBZ with PVBD diverter PVBZ with PVBD diverter exploded view 2 2 3 2 3 2 3 3 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 4 50±5Nm [443±44lbf-in] 5 6 50±5Nm [443±44lbf-in] 7 4 5 2 8 30±3Nm [266±27lbf-in] 3 9 0 0 6[0.24] 35±3Nm [30±27lbf-in] PVBZ with PVBD kits Type Description Code number A/B-port POC Letter Compensated high flow PVBZ with POC Basic module with manifold interface 57B6958 Machined top A/B-port A 005475 Machined top A/B-port 03296 Machined top A/B-port 57B50 M22 x.5-57b503 7/8-4 UNF - 027604 M22 x.5 - C Code number Letter A B C PVBD PVBD diverter 6/2 shift valve Multi-valve for PVBZ Item Description B PVBD Diverter - - 2 Plastic plugs - - 4 2 3 Screw - - 4 4 4 PVBD spool - - 5 PVC assembly - - 6 PVC Solenoid - - Danfoss October 208 AX2846688990en-0000 89

Item Description Code number Letter A B C 7 Pilot operated check valve (POC) - 2 - - 8 LS shuttle valve assembly - - - 9 Locking pin - - - 0 Plug - - - - Compensator assembly - - - 2 Pilot operated check valve (POC) - 2 - - 3 Shuttle disc - - - 4 Pilot valve - 2 - - 5 PVBZ basic module with manifold interface - - - 90 Danfoss October 208 AX2846688990en-0000

PVBS exploded view PVG 32 PVBS main spool Friction Detent 2[0.47] 8±Nm [7±9lbf-in] [0.43] 8±Nm [7±9lbf-in] Mec.Float A-Port Mec.Float B-Port Standard Standard DETENT (NO SPRING) Standard FLOAT A FLOAT B PVM PVML 8±Nm [7±9lbf-in] For spool part numbers, see PVG 32 Technical Information. 92 Danfoss October 208 AX2846688990en-0000

PVM exploded view PVG 32 PVM, mechanical activation 2 6 0[0.40] 6±Nm [53±9lbf-in] 4[0.2] 2.5±Nm [22±9lbf-in] 5 3 4 3[0.2] 5[0.20] 8±0.5Nm [70±4.5lbf-in] 3[0.5] 8±Nm [70±9lbf-in] PVM kits Type Description Code number Letter PVM (Aluminum) Non-adjustable 57B393 A Non-adjustable with lever base 57B394 B Non-adjustable with lever base and lever 57B39 C Adjustable 57B373 D Adjustable with lever base 57B374 E Adjustable with lever base and lever 57B37 F PVM (Anodized aluminum) Adjustable 57B386 D Adjustable with lever base and lever 57B384 F PVM (Cast iron) Adjustable with lever base and lever 57B36 PVM parts list Item Description Code number Letter A B C D E F PVM - 2 Seal kit 57B3999 3 Lever base 06464 - - 4 Lever with black knob 077262 - - - - 5 Lever base and lever with black knob 07587 - - - - Lever base and lever with red knob 34809 - - - - - - 6 Screw M6x5-4 4 4 4 4 4 Danfoss October 208 AX2846688990en-0000 93

PVMD exploded view PVG 32 PVMD, PVMR and PVMF covers 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVMR/PVMF exploded view 3 4 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 5 Cover kits Type Description Code number Letter PVMD Cover in aluminum 57B000 A Cover in anodized aluminum 57B0009 Cover in cast iron 57B002 PVMF Cover in aluminum 57B0005 B PVMR Cover in aluminum 57B0004 C Cover in anodized aluminum 57B002 Cover in cast iron 57B0024 94 Danfoss October 208 AX2846688990en-0000

Parts list Item Description Code number Letter A B C Screw - 4 - - 2 Seal kit 57B3999 - - 3 Friction detent plug assembly - - 4 Screw - - 4 4 5 Seal kit 57B3999 - Danfoss October 208 AX2846688990en-0000 95

PVG 32 PVH hydraulic actuation PVH exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVH kits Description Connection Code number Aluminum 9/6-8 UNF 57B0007 Anodized aluminum 57B000 Cast iron 57B004 Aluminum G/4 57B0008 Anodized aluminum 57B00 Cast iron 57B006 Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 96 Danfoss October 208 AX2846688990en-0000

PVHC exploded view PVG 32 PVHC electrical actuation 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 4 [0.6] 3 Nm [26.5 lbf in] 2 3 PVHC kits Description Code number AMP connector - 2 V 2037 AMP connector - 24 V 2036 DEUTSCH connector 2 V 2038 DEUTSCH connector 24 V 2039 Parts list Item Description Code number Amount Screw - 4 2 Solenoid valve - 2 3 Seal kit 57B3999 Danfoss October 208 AX2846688990en-0000 97

PVG 32 PVDI directional indicator PVDI exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 Direction indicator kits Type Description Code number PVDI Directional indicator - x4 DIN 57B00 Directional indicator - x4 DIN 57B002 Directional indicator - x4 DIN 57B003 Directional indicator with two NO switches - x4 DIN 57B005 PVDI-H (For PVH) Directional Indicator for hydraulic actuation x4 DIN 57B004 Parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B099 98 Danfoss October 208 AX2846688990en-0000

PVG 32 PVSI, PVSD, PVST end plate PVSI start plate exploded view 6[0.24] 30±3Nm [266±27lbf-in] 0 3 2 4±0.5Nm [35±4.4lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] PVSD end plate exploded view 35±5Nm [309±44lbf-in] 4 8 9 5 5±0.5Nm [44±4.4lbf-in] 4±0.5Nm [35±4.4lbf-in] 6 6[0.24] 30±3Nm [266±27lbf-in] 7 90±5Nm [797±44lbf-in] PVSI with PVE PPRV exploded view 6[0.24] 30±3Nm [266±27lbf-in] 2 22 20 6[0.24] 30±3Nm [266±27lbf-in] Danfoss October 208 AX2846688990en-0000 0

PVST with PVE PPRV and PP dump 24 6[0.24] 30±3Nm [266±27lbf-in] 25 30 23 26 6[0.24] 30±3Nm [266±27lbf-in] 29 6[0.24] 30±3Nm [266±27lbf-in] 28 27 30±3Nm [266±27lbf-in] 5±0.5Nm [44±27lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] Type Description Mounting Code number Letter PVSI Start plate M8 09773 A 5/6-8 UNC 09772 End plate with PVE PPRV M0 57b207 B PVST End plate with PVE PPRV and PP dump (iron) M8 050065 C PVSD PVSD End plate M8 57B2904 D Item Description Code number Letter A B C D PVS/PVSI End plate with LX connection - - - - 2 Plastic plug - - - - 3 PVSI with P-, T-, LX- and M-connection - - - - 4 Plastic plug - - 2 - - 5 Plastic plug - - - - 6 Plastic plug - - - - 7 PVST with T-connection - - - - - 8 Plastic plug - - - - - 9 Plug with O-ring - - - - - 0 Plug - - - - Pilot supply for PVE 3.5 bar - - - - 2 Plastic plug - - - - 3 PVSI Start plate - - - - 4 Pilot cartridge - - - - 5 Plastic plug - - - - 6 Check valve - - - - 7 Plug - - - - 8 Plastic plug - - - - 9 PVSD end plate - - - - 20 PVSI with PVE PPRV - - - - 2 Plug - - - - 02 Danfoss October 208 AX2846688990en-0000

Item Description Code number Letter A B C D 22 Pilot supply for PVE 3.5 bar - - - - 23 PVST with PVE PPRV and PP dump - - - - 24 Plug - - - - 25 Plug - - - - 26 PVPP Electrical Pilot Shut-Off valve - - - - 27 Plug - - - - 28 Selector for LX - - - - 29 Plug - - - - 30 Pilot supply for PVE 3.5 bar - - - - Danfoss October 208 AX2846688990en-0000 03

PVG 32 seal kits Seal kits for PVG 32 Type Description Code number PVP/PVPV/PVPVM Module 57B5999 PVB Module 57B6999 PVM/PVH/PVMD/PVMR/PVMF Module 57B3999 PVEO/PVEM/PVEP/PVEA/PVEH/PVES Module 57B4997 PVDI Module 57B099 Seal kit for one work section For a PVG 32 with PVB section 57B8999 Seal kit for seven work sections For a PVG 32 with 7 PVB section 56335 PVPX Module 57B5996 PVHC Module 06235 PVEO/PVEM/PVEH Module before middle 993 57B4999 PVPX Module before 996 57B4998 PVBZ PVBZ with POC 57B6989 PVSP Priority module 57B5999 Danfoss October 208 AX2846688990en-0000 05

PVG 32 PVE series 4 PVEO PVEO exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEO part kits Type Description Code number PVEO x4 DEUTSCH 2 V 57B429 x4 DEUTSCH 24 V 57B4292 x4 AMP 2 V 57B490 x4 AMP 24 V 57B4902 x4 AMP 24 V (anodized) 57B4272 x4 DIN 2 V 57B426 x4 DIN 24 V 57B4228 x4 DIN 2 V (anodized) 57B4266 x4 DIN 24 V (anodized) 57B4268 PVEO-R x4 DEUTSCH 2 V 09080 x4 DEUTSCH 24 V 09092 x4 AMP 2 V 57B4903 x4 AMP 24 V 57B4904 x4 AMP 24 V (anodized) 57B4274 x4 DIN 2 V 57B427 x4 DIN 24 V 57B4229 PVEO-DI x4 AMP 2 V 57283 x4 AMP 24 V 57282 PVEO parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 06 Danfoss October 208 AX2846688990en-0000

PVG 32 PVE series 4 PVEA PVEA exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEA part kits Type Description Code number PVEA x4 DEUTSCH active 57B4792 x4 DEUTSCH - passive 07365 x4 AMP - active 57B4734 x4 AMP - passive 57B4735 x4 AMP (anodized) 57B4775 PVEA-DI 2x4 DEUTSCH active 57B4796 2x4 AMP active 57B4736 2x4 AMP passive 57B4737 PVEA-NP x6 DEUTSCH - active 05542 PVEA parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 Danfoss October 208 AX2846688990en-0000 07

PVG 32 PVE series 4 PVEM PVEM exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 Type Description Code number PVEM x4 DIN 2 V 57B46 x4 DIN 24 V 57B428 PVEM-FLB x4 DIN 2 V 57B446 x4 DIN 24 V 57B4428 PVEM-R x4 DIN 2 V 57B456 x4 DIN 24 V 57B4528 Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 08 Danfoss October 208 AX2846688990en-0000

PVG 32 PVE series 4 PVEP PVEP exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEP kit Description Code number x6 DEUTSCH - active 034832 PVEP parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 Danfoss October 208 AX2846688990en-0000 09

PVG 32 PVE series 4 PVEU PVEU exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEU kits Description Code number x4 DEUTSCH - passive 089090 x4 AMP - active 08909 x4 AMP active 57B4044 x4 AMP passive 57B4045 PVEU parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 0 Danfoss October 208 AX2846688990en-0000

PVG 32 PVE series 4 PVEH PVEH exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEH part kits Type Description Code number PVEH x4 DEUTSCH active 57B4092 x4 DEUTSCH - passive 57B4093 x4 AMP active 57B4034 x4 AMP passive 57B4035 x4 AMP active (anodized) 57B4074 x4 AMP passive (anodized) 57B4075 x4 DIN active 57B4032 x4 DIN passive 57B4033 x4 DIN active (anodized) 57B4073 PVEH-FLA x6 DEUTSCH - active 57B4398 x6 AMP - active 57B4338 PVEH-FLB x6 DEUTSCH - passive 57B4392 x6 DIN - active 57B4332 PVEH-DI 2x4 DEUTSCH active 57B4096 2x4 AMP - active 57B4036 2x4 AMP - passive 57B4037 PVEH-NP x6 DEUTSCH - active 05543 Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 Danfoss October 208 AX2846688990en-0000

PVG 32 PVE series 4 PVES PVES exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVES kits Type Description Code number PVES x4 DEUTSCH active 57B4892 x4 DEUTSCH - passive 089276 x4 DEUTSCH active (Fast-no memory) 57B4894 x4 AMP active 57B4834 x4 AMP passive 57B4835 x4 AMP passive (anodized) 57B4865 x4 DIN active 57B4832 x4 DIN passive 57B4833 PVES-SP x6 DEUTSCH - passive 08994 PVES parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 2 Danfoss October 208 AX2846688990en-0000

PVG 32 PVED-CC series 5 PVED-CC exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVED-CC kits Type Description Code number PVED-CC 2x4 DEUTSCH ISObus 07869 Spare parts for DEUTSCHconnector Spare parts for AMPconnector 2x4 AMP ISObus 07870 2x4 DEUTSCH CANopen 72734 2x4 AMP CANopen 6942 4 m cable 007498 0. m loop cable 00753 0.3 m loop cable 96 0.75 m loop cable 095622 CAN bus terminator 00756 4 m cable with gray connector 57B4994 4 m cable with black connector 57B4995 0. m loop cable 57B4987 0.75 m loop cable 09558 CAN bus terminator with gray connector 63647 CAN bus terminator with black connector 57B4988 PVED-CC parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 Danfoss October 208 AX2846688990en-0000 3

PVG 32 PVE series 7 PVEO PVEO exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVE 7 PVEO part kits Type Description Code number PVEO x4 DEUTSCH 2 V 66843 x4 DEUTSCH 24 V 66838 x4 AMP - 2 V 66866 x4 AMP - 24 V 66837 x4 DIN - 2 V 66836 x4 DIN - 24 V 66743 PVEO-R x4 DEUTSCH 2 V 66753 x4 DEUTSCH 24 V 66754 x4 AMP - 2 V 66867 x4 AMP - 24 V 66776 x4 DIN - 2 V 6683 x4 DIN - 24 V 66908 PVEO-DI 2x4 AMP 2 V 68740 2x4 AMP 24 V 66869 Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 4 Danfoss October 208 AX2846688990en-0000

PVG 32 PVE series 7 PVEO-HP PVE series 7 PVEO-HP exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEO-HP kits Description Code number x4 DEUTSCH 2 V 66765 x4 DEUTSCH 24 V 66766 x4 AMP - 2 V 66763 x4 AMP - 24 V 87524 x4 DIN - 2 V 8755 x4 DIN - 24 V 87562 Parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 Danfoss October 208 AX2846688990en-0000 5

PVG 32 PVE series 7 PVEM PVEM exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVE series 7 PVEM kits Type Description Code number PVEM x4 DIN passive 66829 PVEM-FLB x4 DIN passive 66852 PVEM-R x4 DIN passive 66845 PVEM-Q x4 DIN passive 66853 Parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 6 Danfoss October 208 AX2846688990en-0000

PVG 32 PVE series 7 PVEA PVEA exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEA kits Type Description Code number PVEA x4 DEUTSCH - active 77346 x4 DEUTSCH - passive 77347 x4 AMP active 77353 x4 AMP passive 77348 PVEA-NP x6 DEUTSCH active 77345 PVEA-DI 2x4 DEUTSCH passive 77357 2x4 AMP active 77356 2x4 AMP passive 77355 Parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 Danfoss October 208 AX2846688990en-0000 7

PVG 32 PVE series 7 PVEH PVEH exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEH kits Type Description Code number PVEH x4 DEUTSCH - passive 66732 x4 DEUTSCH - active 66775 x4 AMP passive 66825 x4 AMP active 6688 x4 DIN passive 66824 x4 DIN active 6687 PVEH-U x4 AMP passive 66832 x4 AMP active 6682 x4 DIN passive 66770 x4 DIN active 66772 PVEH-FLB x4 DEUTSCH passive 66840 x4 DEUTSCH active 66742 x4 DIN active 66839 PVEH-FLA x6 DIN active 6684 x6 AMP passive 68738 x6 AMP active 68739 PVEH-SP x6 DEUTSCH active 66773 PVEH-NP x6 DEUTSCH fast active 66750 PVEH-DI 2x4 DEUTSCH active 66835 2x4 AMP passive 66820 2x4 AMP active 6689 Parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 8 Danfoss October 208 AX2846688990en-0000

PVG 32 PVE series 7 PVES PVES exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVES kits Type Description Code number PVES x4 DEUTSCH - passive 66748 x4 DEUTSCH - active 66864 x4 AMP passive 66859 x4 AMP active 66858 x4 DIN passive 66849 x4 DIN active 66857 PVES-U x4 DEUTSCH passive 66745 x4 AMP active 66747 PVES-SP x6 DEUTSCH - passive 66752 Parts list Item Description Code number Amount Screw - 4 2 Seal kit 57B3999 Danfoss October 208 AX2846688990en-0000 9

PVG 28/256 service parts PVPV exploded view PVG 28/256 pump side module, PVPV 2 35±5Nm [30±44lbf in] 5±Nm [44±9lbf in] 3 30±3Nm [265±27lbf in] 35±5Nm [30±44lbf in] 4 30±3Nm [265±27lbf in] 35±3Nm [30±27lbf in] 3[0.50] PVPV kits Description Measure Code number Letter Closed center with pilot supply for electrical actuation, pilot gage port, and facility for pilot shut off Closed center with pilot supply for hydraulic actuation, pilot gage port, and facility for pilot shut off Metric flange 7330 A G-/2" BSP 76703 SAE flange 7669 Thread ports -7/8 UNF 76702 Metric flange 78095 B G-/2" BSP 78098 SAE flange 787 Thread ports -7/8 UNF 789 Parts list Item Description Code numbers Letter Pilot pressure reducing valve - 2 PVPP 2V 6038 2 PVPP 24V 6039 A B 20 Danfoss October 208 AX2846688990en-0000

Parts list (continued) Item Description Code numbers Letter 3 Plug if no PVPP is mounted - 4 Shock and anti-cavitation Valve See PVLP/PVLA 2 2 A B Danfoss October 208 AX2846688990en-0000 2

PVB 28, basic module PVB exploded view 35±3Nm [30±27lbf in] 3[0.50] 2 35±3Nm [30±27lbf in] 3[0.50] 3 20±3Nm [77±27lbf in] 4 20±3Nm [77±27lbf in] E03 667 3 W Warning Risk of leak The module will leak if the flange mount screws are not properly secured. Flange mount screws according to ISO 662-2. PVB 28 kits Description Measure Code number Letter Compensated basic module Metric flange 70522 A G-/2" BSP 70528 SAE flange 70524 Thread ports -7/8 UNF 70526 Compensated basic module with LSA/B relief valve for each work port Metric flange 7695 B Compensated basic module with LSA/B relief valve for each work port and 2xPVLPs for each work port G-/2" BSP 7698 SAE flange 7696 Thread ports -7/8 UNF 7697 Metric flange 6562 C G-/2" BSP 70527 SAE flange 70523 Thread ports -7/8 UNF 70525 22 Danfoss October 208 AX2846688990en-0000

Parts list Item Description Code number Letter A B C and 2 Shock and anti-cavitation Valve See PVLP/PVLA - - 4 3 LS relief valve 55L6495-2 2 4 LS relief valve service tool 55L6494 - - - Danfoss October 208 AX2846688990en-0000 23

PVB 256, Basic Module PVB 256 exploded view 35±3Nm [30±27lbf in] 3[0.50] 2 35±3Nm [30±27lbf in] 3[0.50] 3 20±3Nm [77±27lbf in] 4 20±3Nm [77±27lbf in] E03 668 3 PVB 256 kits Description Measure Code number Letter Compensated basic module Metric flange 69244 A G-/2" BSP 69252 SAE flange 69248 Thread ports -7/8 UNF 77020 Compensated basic module with LSA/B relief valve for each work port Metric flange 705 B Compensated basic module with LSA/B relief valve for each work port and 3xPVLPs for each work port Turbo compensator feature basic module with LS A/B relief valve for each work port and 3xPVLPs for each work port G-/2" BSP 7707 SAE flange 7706 Thread ports -7/8 UNF 7709 Metric flange 69243 C G-/2" BSP 6925 SAE flange 69247 Thread ports -7/8 UNF 7708 Metric flange 83379 D G-/2" BSP 83406 SAE flange 83404 Thread ports -7/8 UNF 83402 24 Danfoss October 208 AX2846688990en-0000

Item Description Code number Letter A B C D and 2 Shock and anti-cavitation Valve See PVLP/PVLA - - 4 4 3 LS relief valve 55L6495-2 2 2 4 LS relief valve service tool 55L6494 - - - - Danfoss October 208 AX2846688990en-0000 25