FMM3191DG. 2.5Gb/s GaAs Laser Driver

Similar documents
Extended InGaAs Photodiodes IG26-Series

Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay

2 to 5 Serial Cell Li-ion Battery Protection IC for Secondary Protection

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

JUMO MIDAS S05 OEM pressure transmitter - universal

PERSEUS ULTRA LOW PRESSURE

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

IFC07 E-02. USB Connectors HDMI Connectors DisplayPort Connectors

QM10HA-HB MEDIUM POWER SWITCHING USE

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

Proportional directional valves

TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006

E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A

Between elements measure. Active area (per 1 element)

PERSEUS MEDIUM PRESSURE PF61 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED WITH AEx (NEC 505) Exd, Exia & INDUSTRIAL PRESSURE SWITCH

TA25DU0.4 Overload Relay a. Features. Descriptions

UPS Pure Sinewave UPS

Schematic diagram for the 8200 vector, 230 V Schematic diagram for the 8200 vector, 400/500V 1)

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL

GUARDIAN VERTICAL MOUNTING

Spring Return DuraDrive Two-Position Actuator

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve

SINEAX C 402 Alarm unit

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009

KDA 24 SERIES OPERATOR MANUAL. KEPCO An ISO 9001 Company. ALARM MODULE I INTRODUCTION II FEATURES

FOL14xx Series (with Isolator) August 2017

Press control block PSB Type approved according to DIN EN 693

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2, 3/2 and 4/2 directional poppet valve with solenoid actuation

11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en

3-Way Ball Valve Assemblies Using TAC DuraDrive Actuators

Solenoid Pilot Operated Directional Control Valve

P3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1

RPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.

Technical and Performance Aspects of a Dynamic Voltage Restorer

JUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849

NS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional

PTC Thermistors For Degaussing, Dual, Mono And Double Mono Cased

2/2 Solenoid Operated Seat Valve, ISO Size 03

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Directional Control Valves. General Description. Features. Specifications

4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:

DALI electronic ballasts

Ballast EEI Dimensions Connection Weight Circuit power

4/2- and 4/3-way shut-off valve

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

Solenoid Pilot Operated Directional Control Valve

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800

* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

Boiler room components 0861EN April 2017 Distribution and regulation units

Solenoid Pilot Operated Directional Control Valve

EFFEKTA. Solar inverter HX-Series NEU / NEW

Roller and ball bars for easy and safe die change

Description Individual Reduction Gearbox Model: 2:60mm Gear Type: GN:Helical Gear Reduction Ratio: 3:1 to 200:1 Bearing Type: K:Ball Bearing

Varispeed F7 CIMR-F7Z. System configuration. The industrial workhorse

PRODUCT SPECIFICATION C00 Converter. 48/36V to 12V, 20 Amps w/switched Output

TITAN ULTRA LOW. PF266 ATEX/IECEx Exd, Exia & INDUSTRIAL ULTRA LOW PRESSURE SWITCH FEATURES ULTRA LOW PRESSURE

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

JUMO dtrans T06 Multifunctional Four-Wire Transmitter in Mounting Rail Case in Accordance with DIN EN and EN ISO 13849

Electrically controlled directional control poppet valve type UREZ6

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

Blocked for new applications / Für Neuanwendung gesperrt

The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

Solenoid Pilot Operated Directional Control Valve

TFM 1600 Seat Body Material: Stainless. PTFE Seat Body Material: Stainless and Brass. Catalog No. V81-5 Sept. 2008

SP486/SP487. Quad RS-485/RS-422 Line Drivers

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS

Varispeed E7 CIMR-E7Z. System Configuration

High Power Thin Film Chip Resistors

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION

Ex-proof proportional valves multicertification ATEX, IECEx, EAC

Product Specification 12010E00 EQUALIZER AND 12010C00 CONVERTER, 12V TO 24V FAMILY

Wirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560

World s Leading Supplier of Fastener Inspection Equipment

CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")

Solenoid Pilot Operated Directional Control Valve

Directional spool valves, direct operated, with solenoid actuation. Type WE VP1. Features. Contents. RE VP1 Edition: Replaces:

Control stations and enclosures

Commercial Condensing Units

SHEET 1 OF 6

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

Glydea TM Range. Motorization for draperies

OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT

HVB HYDRAULIC VIBRA PUMPS

Control stations and enclosures Control station enclosures : insulated, metal and flush mounting

Mechanical Fail-Safe Damper Actuator NFA

u-tec UT Our change system, that makes EVERYTHING possible

I.T TRM-S series 20 VERTICAL AXIS SERVOMOTOR TURRETS TOOLHOLDERS CLAMPING DIN TECHNICAL INFORMATION ISSUED

Transcription:

.Gb/s Gs FMM9DG FETURES Opertion DC to. Gbit/s, NRZ Pek to Pek Output oltge, Min: (RL=0Ω) Pek nd Bis Current djustment ECL Comptible Input Single Ended or Differentil Input Single. Power Supply Bis Current Monitoring High Relible, Metl/Cermic pin Hermetic Flt Pckge MILser use only JPN FMM 9DG 9608 DESCRIPTION The FMM9DG Gs is highdt rte driver circuit designed for fiber optic trnsmitters operting t dt rtes up to.gbit/s (NRZ). The device is cpble of driving the highpower Lser Diodes. Pek nd bis currents cn be utomticlly controlled by pplying feedbck signl from n externl utomtic Power Control. This driver is used for MILser. BSOLUTE MXIMUM RTINGS (mbient Temperture T= C) Prmeter Symbol Rtings Supply oltge Input oltge Power Supply Current Pek Current Control oltge Bis Current Control oltge Storge Temperture SS 7.0 to 0 IN SS to 0 ISS 00 SS.0 to SS +. IP (RL = 0 Ω) IB SS.0 to SS +. IB Tstg to C

FMM9DG.Gb/s Gs ELECTRICL CHRCTERISTICS (Tc= C, SS=., RL=0Ω, t Pin) Prmeter Mximum Dt Rte Symbol Test Conditions NRZ Min.. Limit Typ. Mx. Mximum Pek Current Mximum Pek Current Mximum Bis Current Power Supply Current Rise Time Fll Time Reference oltge Output oltge IP IPDH IB ISS tr tf ref out IP=. IB=. IB=. DIN="Lo" IP=. IB=. IB=. DIN="Hi" IB=. IB=. IP=. IP=. IB=. IB=. 0% to 80% 0% to 80% Duty 0% IP=. IB=. IB=. DIN="Lo" 60 0 00 0 0.. Gb/s ps ps.0 RECOMMENDED OPERTING CONDITIONS Prmeter Symbol Test Conditions Min. Limits Typ. Mx. Supply oltge SS.6..9 High Level Input oltge IH ref =..0 0.9 Low Level Input oltge IL ref =..7.6 Pek Current Control oltge IP SS SS+. Bis Current Control oltge IB IB SS SS+.8 Cse Temperture Tc 0 +6 C

.Gb/s Gs FMM9DG FMM9DG MILser Block Digrm MILser 0Ω 0Ω MOD LD SS SS D IN REF IB IP IB SS SS SS 70 Tc= C, t Pin 60 SS=. IB=. IB=. Pek Current IP[] 0 0 0 0 0 0..8..0.6 Pek Current Control oltge IP[]

.Gb/s Gs FMM9DG FMM9DG Test C SS R R IP IB C C 0 9 Pulse Pttern Genertor R R 6 SS DIN REF SS IP SS SS IB IB SS 7 8 9 0 8 7 6 R R 0dB TTN 0dB TTN Smpling Oscilloscope R R R R IB C: 0.µF : 0.068µF R: 0Ω R: 00Ω R: 0~kΩ R: 0~kΩ DG PCKGE 9.±0. 0 9 0..0 UNIT: mm INDEX 0. 0. Mx 8 9.±0. 6.7 Typ. 7 6 7.7±0. 0..±0. 7 8 9 0.0 MIN 0.6.7 MX

FMM9DG.Gb/s Gs For further informtion plese contct: FUJITSU COMPOUND SEMICONDUCTOR, INC. merics & R.O.W. Znker Rd. Sn Jose, C 98, U.S.. Phone: (08) 900 FX: (08) 89 www.fcsi.fujitsu.com FME, QDD Fujitsu Microelectronics Europe GmbH Quntum Devices Division Network House Norreys Midenhed, Berkshire SL6 FJ ed Kingdom TEL: + (0) 68 0800 FX: + (0) 68 0888 CUTION Fujitsu Compound Semiconductor Products contin gllium rsenide (Gs) which cn be hzrdous to the humn body nd the environment. For sfety, observe the following procedures: Do not put this product into the mouth. Do not lter the form of this product into gs, powder, or liquid through burning, crushing, or chemicl processing s these byproducts re dngerous to the humn body if inhled, ingested, or swllowed. Observe government lws nd compny regultions when discrding this product. This product must be discrded in ccordnce with methods specified by pplicble hzrdous wste procedures. FUJITSU QUNTUM DEICES SINGPORE PTE LTD. Hong Kong Brnch Rm. 0, Ocen Centre, Cnton Rd. Tsim Sh Tsui, Kowloon, Hong Kong TEL: +87706 FX: +87669 FUJITSU QUNTUM DEICES LIMITED Globl Business Division Globl Sles Support Deprtment Shinjuku Diichiseimei Building, 7 Nishishinjuku, Shinjukuku, Tokyo, 607, Jpn TEL: +86 FX: +898 Fujitsu Limited reserves the right to chnge products nd specifictions without notice. The informtion does not convey ny license under rights of Fujitsu Limited or others. 000 FUJITSU COMPOUND SEMICONDUCTOR, INC. Printed in U.S.. FCSI000M00