LEXION 770 760 750 740 730 670 Demands rise.
LEXION 770 / 770 TT 760 / 760 TT 750 / 750 TT 740 / 740 TT 730 670 Straw Walker Threshing system APS (Accelerated Pre-Separation) MULTICROP concave Drum width in (mm) 67 (1,700) 67 (1,700) 56 (1,420) 56 (1,420) 56 (1,420) 67 (1,700) Drum diameter in (mm) 24 (600) 24 (600) 24 (600) 24 (600) 24 (600) 24 (600) Drum speed rpm 395 1150 395 1150 395 1150 395 1150 395 1150 395 1150 with reduction gear rpm 166 483 166 483 166 483 166 483 166 483 166 483 Closed rasp bar threshing drum m m m m m m 7/18 concave 18 concave m m m m m m Round bar concave m m m m m m Concave wrap angle degrees 142 142 142 142 142 142 Main concave area ft 2 (m 2 ) 13.5 (1.26) 13.5 (1.26) 11.4 (1.06) 11.4 (1.06) 11.4 (1.06) 13.5 (1.26) Electrohydraulic concave adjustment with overload protection Synchronized accelerator and impeller Automatic drum variator tensioner Large stone trap Rice threshing unit m m m m Separation ROTO PLUS high performance rotors quantity 2 2 2 2 2 Rotor length in (mm) 165 (4,200) 165 (4,200) 165 (4,200) 165 (4,200) 165 (4,200) Rotor diameter in (mm) 17.5 (445) 17.5 (445) 17.5 (445) 17.5 (445) 17.5 (445) Rotor area n 2 (m 2 ) 5,735 (3.7) 5,735 (3.7) 4,650 (3.0) 4,650 (3.0) 4,650 (3.0) Rotor speed rpm 800/640/500 (962) 800/640/500 (962) 800/640/500 (962) Variable speed rotor rpm 360 1050 360 1050 360 1050 360 1050 360 1050 Variable rotor separation area m m m m m Straw walker separation quantity 6 Walker length in (mm) 173 (4,400) Walker area in 2 (m 2 ) 11,507 (7.42) MULTIFINGER SEPARATION SYSTEM Total threshing & separation area in 2 (m 2 ) 8,412 (5.43) 8,412 (5.43) 6,886 (4.44) 6,886 (4.44) 6,886 (4.44) 14,685 (9.47) Cleaning system JET STREAM cleaning system Standard cleaning system Plastic prep pan (divided, removable from the front) Cleaning fans 8-turbine 8-turbine 6-turbine 6-turbine 6-turbine 6-turbine In-cab speed adjustment Dual ventilated step 3-D cleaning system m m m m m m Total sieve area in 2 (m 2 ) 9,610 (6.2) 9,610 (6.2) 7,905 (5.1) 7,905 (5.1) 7,905 (5.1) 9,286 (6.0) In-cab sieve adjustment Returns elevator (to APS) Returns visible from the cab Electronic returns monitoring in CEBIS m m m m m GRAINMETER (includes electronic m m m m m returns monitoring) Standard m Optional Not available 2010 CLAAS of America Inc. LEXION is a registered trademark, and TERRA TRAC, JET STREAM and MAXFLEX are trademarks of CLAAS KGaA mbh. Cat and Caterpillar are registered trademarks, and ACERT is a trademark of Caterpillar Inc. Ag Leader is a registered trademark of Ag Leader Technology. MAV is a registered trademark of Redekop Manufacturing Company. MudHog is a registered trademark of the Tuthill Corporation. SwathMaster and Rake-Up are trademarks of MacDon Industries, Ltd. CLAAS continually develops its products to meet customer requirements. This means that all products are subject to change without notice. All descriptions and specifications in this brochure should be considered as approximate and may include optional equipment that is not part of the standard specifications. Please refer to your nearest LEXION dealer and their price list for local 68
PRODUCT 770 / 770 TT 760 / 760 TT 750 / 750 TT 740 / 740 TT 730 670 Straw Walker Grain tank Volume bu (l) 360 (12,686) 360 (12,686) 330 (11,629) 300 (10,572) 300 (10,572) 280 (9,867) Unloading auger swivel angle degrees 101 101 101 101 101 101 Unloading rate bu/s 3.3 3.3 3.3 2.8 (3.3 opt) 2.8 (3.3 opt) 2.8 QUANTIMETER yield meter m m m m m Residue management PRO CHOP 108 knife straw chopper m m m PRO CHOP 72 knife straw chopper m m m TURBO CHOP 88 knife straw chopper m m TURBO CHOP 72 knife straw chopper m m m MAV chopper, 60 knives m m m MAV chopper, 52 knives m m m Straw spreader (rice) m m m m m Straw deflector Chaff spreader m m m m m m Chaff blower m m m m m m Undercarriage TERRA TRAC with suspension m (TT) (TT) TERRA TRAC with full suspension (Generation III) (TT) (TT) (TT 25 mph) 4-TRAC all wheel drive m m m m m m 2-gear transmission m 25 mph (40 km/h) m (TT) 19 mph (30 km/h) 16 mph (25 km/h) /m (TT) Engine Manufacturer Mercedes Benz Caterpillar Caterpillar Caterpillar Caterpillar Caterpillar Model OM 502 LA C13 C13 C9 C9 C9 Cylinders number V 8 Inline 6 Inline 6 Inline 6 Inline 6 Inline 6 Rated speed rpm 2000 2100 1900 2100 2100 2100 Engine capacity at rated speed (SAE) hp (kw) 523 (390) 462 (350) 425 (317) 350 (261) 311 (232) 350 (261) Maximum power (SAE)* hp (kw) 563 (420) 516 (385) 459 (343) 373 (278) 336 (251) 373 (278) Fuel consumption monitoring m m m m m Fuel tank capacity Emission Standard Tier III for all models gal (l) 304 (1,150) 304 (1,150) optional 304 (1,150) optional 304 (1,150) optional 304 (1,150) optional CLEAN SWEEP Rotary screen EASY CEBIS TELEMATICS m m m m m m Yield mapping m m m m m m CRUISE PILOT m m m GPS PILOT, LASER PILOT, AUTO PILOT m m m m m m Weight (can vary depending on equipment) Wheeled machine without header, full fuel tank lb (kg) 43,750 (19,850) 43,750 (19,850) 37,500 (17,000) 37,000 (16,785) 37,000 (16,785) 32,000 (14,515) (based on 900/60 R32 tire option) TERRA TRAC machine without header, full fuel tank lb (kg) 49,750 (22,570) 49,750 (22,570) 43,500 (19,750) 41,875 (19,000) Standard m Optional Not available * at rated engine speed less 200 rpm specification details. Some protective panels may have been removed for photographic purposes in order to present the function clearly. To avoid any risk of danger, never remove these protective panels yourself. In this respect, please refer to the relevant instructions in the operator s manual. Google Earth mapping service is a trademark of Google, Inc. Printed in the U.S.A. claasofamerica.com 69
Heads Draper heads MAXFLO 1200 MAXFLO 1050 Effective cutting width ft (m) 40 ft (11.97) 35 ft (10.44) Combine header adapter Knife drive synchronized transmission drives on both sides synchronized transmission drives on both sides Center draper belt Patented MAXFLO feeding system Compression augers Stainless steel intake floor In-cab draper belt reverser In-cab draper speed control Side draper depth in 40 40 Rear wall extension Hydraulic reverser Hydrostatic reel drive rpm 11 79 11 79 Multi-sensor AUTO CONTOUR Reel speed control Reel height adjustment Spare knife Stabilization wheels Crop lifters m m VARIO 1200 / 1050 VARIO 900 Effective cutting width ft (m) 40 ft (11.97) / 35 ft (10.44) 30 ft (9.12) Drive synchronized transmission drives on both sides single-side belt drive Folding divider Spacing of knife to intake auger in (mm) 18.9-30.7 (480-780), for canola 42.5 (1080) 18.9-30.7 (480 780), for canola 42.5 (1080) Knife dual, synchronized drive on both sides single Cutting frequency Strokes/min 1334 1120 Reel and auger support split reel and intake auger with central bearing single reel and auger Intake auger diameter in (mm) 26 (660) 22.8 (580) AUTO CONTOUR Reel speed control Reel height adjustment Reel leveling system Table positioning Spare knife Crop lifters Pick-up heads P516 Swathmaster P514 Swathmaster P516 Rake-Up P514 Rake-Up Trough width ft (m) 16 (4.9) 14 (4.3) 16 (4.9) 14 (4.3) Pickup Drive Mechanical Mechanical Mechanical Mechanical Hydraulic crop hold down Number of draper belts 9 8 9 8 Auger diameter in (mm) 24 (610) 24 (610) 24 (610) 24 (610) Auger speed rpm 185 185 185 185 Automatic pickup speed Overall width (to tire edges) ft (m) 18.0 (5.5) 16.4 (5.0) 18.0 (5.5) 16.4 (5.0) Standard m Optional Not Applicable * Please consult your LEXION dealer for header / machine compatibility. 70
Heads Corn heads 18-20 16-30 12-30 12-22 8-38 8-36 8-30 6-30 18-20c 12-30c 12-22c 8-30c Number of rows 18 16 12 12 8 8 8 6 18 12 12 8 Row spacing in 20 30 30 22 38 36 30 30 20 30 22 30 Row units Knife stalk rolls Reversible knives Enclosed gearbox drive Hydraulic deck plates 3-blade stalk chopper Auger Diameter in 15.75 15.75 15.75 15.75 15.75 15.75 15.75 15.75 15.75 15.75 15.75 15.75 Options AUTO CONTOUR m m m m m m m m m m m m AUTO PILOT m m m m m m m m m m m m Flex heads MAXFLEX 1200 / MAXFLEX 1050 F900 / F750 Effective cutting width ft (m) 40 ft (11.97) / 35 ft (10.44) 30 ft (9.12) / 25 ft (7.60) Drive synchronized transmission drives on both sides single-side belt drive Folding divider - Vertical flex range in (mm) 7 (178) 4 (102) Full fingered auger Hydraulic reverser Hydrostatic reel drive rpm 11 79 11 79 AUTO CONTOUR Reel speed control Reel height adjustment Spare knife Rice heads R750 Effective cutting width ft (m) 25 ft (7.6) Drive single-side belt drive Full fingered auger Hydraulic reverser Hydrostatic reel drive rpm 11 79 CONTOUR AUTO CONTOUR m Reel speed control Reel height adjustment Knife Double knife-serrated Spare knife Standard m Optional Not Applicable claasofamerica.com 71
CLAAS of America Inc. 8401 S. 132nd Street Omaha, NE 68138 Phone +1 (402) 861-1000 Fax +1 (402) 861-1003 www.claasofamerica.com COA 3060 (08/10)