SMD5050-300 Constant current flexible LED strip High output SMD5050 LED; The standard length is 5m and the continuous length is 10m; Little luminance differences between two ends of a strip(10m) ; θ=120 Professional design of circuit board makes a good protection for components; Soft and flexible as a wire; 6 The self-regulating current is designed to make longer life of LED. (The led current changes with the environmental temperature. A rise in led temperature causes a reduction in current and when the led temperature becomes normal, the current would also return to normal, which ensures long lifespan of led) Application Decorative indoor lighting for hotel, advertising light box etc; Backlight for edge lighting/signage lighting; Factories or offices; Holiday decorative lights, display and exhibition lighting; Residential or public facilities; 6 Cove lighting; 7 Long-distance engineering application but is inconvenient for traditional wiring. Product Parameters Basic Parameters No Product no Input Voltage Lighting Wattage Luminous Continuous Tc(K)/nm PCB width PCB Color Cut units Lifespan source Flux (0.5M) length(max) 1 2 3 4 5 GL-24-F309A-B GL-24-F309B-B GL-24-F309C-B GL-24-F309F-B GL-24-F309N-A 24VDC 5050 60W 2900K-6500K 10mm white 540lm 10M 24VDC 60W 2900K-6500K 10mm white 540lm 10M 24VDC 60W 2900K-6500K 10mm white 540lm 10M 24VDC 60W 2900K-6500K 10mm white 540lm 10M 24VDC 60W 2900K-6500K 10mm white 600lm 10M 30, 5050 30, 5050 Cuttable by every 6 leds 30, 5050 30, 5050 30, Note: F309--PCB code; The letter behind F309- Waterproof types: A- silicone tube, B-Silicone groove+ silicone gel, C- Heat shrinkable tube, F-Silicon dripping, N-Non-waterproof Basic Parameters 1 parameters Product No Transmittance Beam angle CRI Connection method(one end/ both sides) Fixed mode IP Operating temperature Storage temperature GL-24-F309A-B 5000x12mm 90% 120 Ra>70 5.5mm DC connector Clip/ Screw Plug/Glue /Wire IP67 GL-24-F309B-B 5000x12mm 90% 120 Ra>70 5.5mm DC connector Clip/ Screw Wire IP67 GL-24-F309C-B 5000x10mm 90% 120 Ra>70 red&white Pin wire Clip/ Screw Wire IP67 GL-24-F309F-B 5000x10mm 90% 120 Ra>70 red&white Pin wire Clip/ Screw Wire IP54 GL-24-F309N-A 5000x10mm 3M adhesive tape 100% 120 Ra>70 red&white Pin wire Connector IP20
silicone tube Good insulation and waterproof for safe use Screw( 20/ Pcs) Silicon clip( 10/ Pcs) 5. 5DC connector silicone end cup(4/ Pcs) Operation Specifications Operation of casing Cut the strip at the mark scissor put the gel into the end caps Seal the end 180 5000 100 12 16. 6 135 10 Product no Standard Length Q'ty( )/ GL-24-F309A-B 5M 64 545mm*445mm*290mm 0.29kg
silicone groove+ silicone gel Good insulation and waterproof for safe use Screw( 20/ Pcs) Silicon clip( 10/ Pcs) 5. 5DC connector 180 5000 100 12 16. 6 135 10 Product no Standard Length Q'ty( )/ GL-24-F309B-B 5M 64 545mm*445mm*290mm 0.45kg
Heat shrinkable tube Good insulation and waterproof for safe use wire EVA clip(10/pcs) Screw( 20/ Pcs) Operation Specifications Heat shrinkable tube Cut the strip at the mark scissor Peel off the heat shrinkable tube with a scissor Solder wire with an electric iron 5000mm Product no Standard Length Q'ty( )/ GL-24-F309C-B 5M 88 545mm*445mm*290mm 0.16kg
Resin-dripping Waterproofing Good insulation and waterproof for safe use Screw( 20/ pcs) Silicon clip( 10/ pcs) wire 5000mm 3mm Product no Standard Length Q'ty( )/ GL-24-F309F-B 5M 100 545mm*445mm*290mm 0.24kg
Non-waterproof Operation Specifications Operation of non-waterproof butting connector wire connector Cut the strip at the mark scissor Put PCB into the connector and ensure the clip to the soldering point Put PCB into the connector at other side and ensure the clip to the soldering point Put PCB into the connector and tighten the caps tighten the caps 5000mm 2mm Product no Standard Length Q'ty( )/ GL-24-F309N-A 5M 88 545mm*445mm*290mm 0.13kg
SMD5050Constant current flexible LED strip Connection Drawing 24VDC Power 1 2 The max 5M Drawing for silicone tube and silicone groove + silicone gel 1 24VDC Power 2 The max 5M 2 The max 5M Drawing for heat shrinkable tube, silicone dripping and non-waterproof Installation peel off 3M tape on the back peel off 3M tape on the back LED strip LED strip Install clips Fix screw 6 Reel Antistatic bag
SMD5050Constant current flexible LED strip 7 Notes 1 Please choose the product with proper IP degrees according to different environments; 2 Don not damage the circuit board line during the installation process; 3 Choose the matched power supply and ensure proper margin for wattage; 4 Turn off the power during the installation process and make sure wiring is correct before power on; 5 It is inappropriate if the connection length is longer than maximum continuous length and it would cause overload, uneven brightness and other damage; 6 Do not stare at the light for a long time as it may cause injury to your eyes; 7 The work like dismantlement and maintainance can only be done by professionals. 8 Appendix Reference standards: GB4208-2008/ IEC 60529:2001