Screw-to-connect Couplings TLX Range COUPLINGS AND NIPPLE Body Size Connection Part No. Dimension locking Weight sleeve ex Coupling Nipple Zoll Dash Description Type Standards Coupling Nipple (mm) (inch) (kg) (lb) (kg) (lb) Rc 3/4" Female thread ISO 7/ 0 607 0 0 607 60.073 2.4.88 2.6 G 3/4" Female thread 0 607 30 0 607 630 0.989 2.2.05 2.4 DIN3852 G " Female thread 0 607 203 0 607 6203.029 2.3.45 2.5 3/4" -2 55 2.7 G 3/4"JIS ORB Female thread JIS B235 0 607 23 0 607 623.066 2.4.82 2.6 3/4" NPT Female thread ANSI B.20.3 0 607 40 0 607 640.079 2.4.95 2.6 /6"-2 UN (3/4" SAE) Female thread SAE J 926-0 607 60 0 607 660.066 2.4.82 2.6 Rc " Female thread ISO 7/ 0 707 03 0 707 603.892 4.2 2.067 4.6 G " Female thread 0 707 203 0 707 6203.644 3.6.89 4.0 DIN3852 G /4" Female thread 0 707 204 0 707 6204.788 3.9.964 4.3 " -6 65 2.56 G " JIS ORB Female thread JIS B235 0 707 233 0 707 6233.89 4.2 2.064 4.6 " NPT Female thread ANSI B.20.3 0 707 403 0 707 6403.899 4.2 2.074 4.6 5/6"-2 UN (" SAE) Female thread SAE J 926-0 707 603 0 707 6603.883 4.2 2.059 4,5 Rc /4" Female thread ISO 7/ 0 807 04 0 807 604 3.044 6.7 3.63 8.5 G /4" Female thread 0 807 204 0 807 6204 2.843 6.3 3.68 7.0 DIN3852 G /2" Female thread 0 807 205 0 807 6205 2.959 6.5 3.540 7.8 /4" -20 75 2.95 G /4" JIS ORB Female thread JIS B235 0 807 234 0 807 6234 3.032 6.7 3.649 8.0 /4" NPT Female thread ANSI B.20.3 0 807 404 0 807 6404 3.052 6.7 3.640 8.0 5/8"-2 UN ( /4" SAE) Female thread SAE J 926-0 807 604 0 807 6604 3.030 6.7 3.69 8.0 Mounting Bracket Weldable Dust Caps Plastic with wire harness Coupling Size Zoll Dash Description Part No. 3/4" -2 0 607 4960 " -6 Mouting bracket for TLX 0 707 4970 /4" -20 0 807 4980 Coupling Size Part No. Description Zoll Dash Coupling Nipple 3/4" -2 0 607 000 0 607 050 " -6 Dust cap 0 707 000 0 707 050 /4" -20 0 807 000 0 807 050 Monkey Wrench Accessory for simple connection Coupling Size Zoll Dash Description Part No. 3/4" -2 " -6 Monkey Wrench 0 807 4999 /4" -20 Remark: Monkey Wrench fits sizes of TLX-Series 607, 707 and 807. CEJN reserves the right to make changes without further notification. Check with an authorized CEJN distributor for availability and prices. The local CEJN companies may carry different versions as standard stock items. All G-thread connection (BSP) TLX couplings and nipples above are stock standard items at factory. The other thread versions are produced on order and the typical lead time is two weeks from factory. Please visit our website, www.cejn.com, for general maintenance tips.
U.S.A. www.cejn.us México www.cejn.us/es The Quick Connect Solution Provider Brazil www.cejnbrasil.com.br United Kingdom www.cejnuk.com France www.cejn.fr Sweden www.cejn.se Denmark www.cejn.dk Spain www.cejn.es Sweden www.cejn.com Germany www.cejn.de Switzerland www.cejn.ch Italy www.cejn.it India www.cejn.in South Korea www.cejn.kr China www.cejn.com.ch Singapur www.cejn.com.sg Australia www.cejn.com.au Japan www.cejn.co.jp 09 004 97 / 04 Copyright 207 CEJN CPG www.cejn.com
YDRAULICS ydraulic Products For Clean and leak-free ydraulic Systems www.cejn.com
Screw-to-connect Couplings TLX Range QR Code for TLX Series TLX-Range /2" (507), 3/4" (607), " (707), /4" (807), /2" (907) The Super-Duty connector with extremely high resilience to surge flows Flat face screw-to-connect coupling that handles the pressure impulses with pure and simple robustness designated for toughest construction and demolition applications Temperature range:.......................... -30 C +00 C (-22 F +22 F) Material seal:................................. Nitrile (NBR) Material:...................................... igh alloy steels with Zinc-Nickel surface Connectability:............................... Connection with resudual pressure only limited by operator strength) Diconnection under pressure:................ Disconnection with residual pressure in the system is allowed Body Size Flow rate Max. working pressure Min. burst pressure ΔP = 3 Bar Connected Disconnected Connected Disconnected Inch Dash (l/min)** (GMP)** (bar) (PSI) (bar) (PSI) (bar) (PSI) (bar) (PSI) /2" - 8 93 24.6 420 609 420 609 680 24366 050 5229 3/4" -2 60 35,2 420 609 400 580 680 24366 000 4503 " -6 285 62,7 420 609 400 580 680 24366 000 4503 /4" -20 400 88,0 420 609 400 580 680 24366 000 4503 /2-24 560 47,9 380 55 380 55 520 22045 000 4503 (**) If the application is constantly above this flow rate for the respective coupling size, a larger coupling size should be considered to avoid too high a pressure drop. The couplings can handle a much higher flow rate but there is a risk of heat build-up in the system. In general, surge flows far above the normal flow rate are not a problem. PRESSURE DROP CART Pressure drop ΔP (PSI) 72.5 0,5,5 2.6 4,5 29 43.5 58 87 6 400 370 000 800 900 700 600 500 400 300 200 907 /2 264.2 237.8 2.3 58.5 32. 05.7 79.3 52.8 907 (Eliminator) Flow rate (l/min) 00 90 80 70 60 50 40 30 20 0 5 807 /4 607 3/4 507 /2 707 26.4 2. 5.9 3.2 0.6 7.9 5.3 2.6.3 23.8 8.5 Flow rate (GPM) 0.26 0, 0.5 2 3 4 5 6 7 8 Pressure drop ΔP (bar) [ bar = 0. MPa] SERIES 907 /2" 707 " 907 /2" (Eliminator) 607 3/4" 807 /4" 507 /2"
Flat-Face Quick Couplings - X64 Range X64 Range - ISO 6028 Flat-Face Pressure Eliminator Nipples DN6.3 (264), DN0 (364), DN2.5 (564), DN6 (664), DN9 (764), DN25 (064) QR-Code for X64 Series Connection under high residual pressure Minimize contamination of your hydraulic system Spill free disconnection igh performance Temperature range:... -30 C +00 C (-22 F +22 F) Material seal:... Nitrile (NBR/PUR) Material:...,,... Steel (zinc-nickel, zinc passivation) Connectability:...With static pressure up to 400 bar on the nipple side Disconnection under pressure:... Not allowed Interchangeable with:... All brands dimensionally interchanging with ISO6028 Body Size Flow rate Max. working pressure Min. burst pressure Spillage @ Dia Dia (mm)* Series @ ΔP = 3 Bar Connected Disconnected Connected Disconnected Disconnected (mm)* ISO DN Inch Dash (l/min)** (GPM)** (bar) (PSI) (bar) (PSI) (bar) (PSI) (bar) (PSI) (ml) 6. 6.3 /4" -04 264 20 5.3 500 725 500 725 500 2755 500 2755 0.02 9.7 0 3/8" -06 364 44.6 400 580 400 580 200 7404 200 7404 0.03 24.5 2.5 /2" -08 564 77 20.3 400 580 400 580 200 7404 200 7404 0.04 27.0 6 5/8" -0 664 6 30.6 400 580 400 580 200 7404 200 7404 0.06 30.0 9 3/4" -2 764 7 45.2 400 580 400 580 200 7404 200 7404 0.0 36.0 25 " -6 064 290 76.6 350 5076 350 5076 200 7404 200 7404 0. (**) If the application is constantly above this flow rate for the respective coupling size, a larger coupling size should be considered to avoid too high a pressure drop. The couplings can handle a much higher flow rate but there is a risk of heat build-up in the system. In general, surge flows above the normal flow rate are not a problem. (*) Diameter for easy identification of ISO6028 Flat-Face coupling size (see picture). PRESSURE DROP CART Pressure drop ΔP (PSI) 72.5 0.5.5 2.6 4.5 29 43.5 58 87 6 000 264.2 900 800 2.3 237.8 700 83.7 600 58.5 500 32. 400 05.7 Dia (*) 300 79.3 200 52.8 Flow rate (l/min) 00 90 80 70 60 50 40 30 20 065/064 765/764 665/664 26.4 2. 5.9 3.2 0.6 7.9 5.3 23.8 8.4 Flow rate (GPM) 565/564 0 2.6 365/364.8 5.3 265/264 0. 0.5 2 3 4 5 6 7 8 Pressure drop ΔP (bar) [ bar = 0. MPa] 0.26 SERIES 065/064 765/764 3/4 665/664 5/8 565/564 /2 365/364 3/8 265/264 /4 CEJN reserves the right to make changes without further notification. Check with an authorized CEJN distributor for availability and prices. All measurements are in mm. Thread connections are listed according to ISO Standards. Other connections on request. Please visit our website, www.cejn.com, for general maintenance tips.to ISO Standards. Other connections on request. Please visit our website, www.cejn.com, for general maintenance tips.
L L 3 3 2 Multi-Couplings - Multi-X Range Multi-X Range Compact design Great flexibility and high performance Easy and ergonomic to maneuver - perpendicular lever movement Connect with residual pressure QR-Code for Multi-X Couplings Max. working pressure:... 350 bar (5076 PSI) Min. burst pressure:... 200 bar (7405 PSI) Temperature range:... -30 C +00 C (-22 F +22 F) Material female plate:... Zinc plated steel, anodized aluminum, zinc, brass Material male plate:... Zinc plated steel, anodized aluminum, brass Material seal:...... NBR/PUR Disconnection under pressure:... To be avoided. Residual pressure can result in recoil effect during disconnection. Always grip the lever firmly. Comment:... Contact CEJN representatives for recommendations for high impulse applications. Connectability case No. DN0 3/8 DN2.5 /2 DN9 3/4 DN25 /2. Connectable with residual pressure on the male side and free to drain on the female side. 2. Connectable with residual pressure on the female side and free to drain on the male side. 3. Connectable with residual pressure on the male side and 0 bar return pressure on the female side 350 bar (5076 PSI) 350 bar (5076 PSI) 350 bar (5076 PSI) 350 bar (5076 PSI) 250 bar (3626 PSI) 50 bar (275 PSI) 60 bar (870 PSI) 20 bar (74 PSI) 250 bar (3626 PSI) 220 bar (3626 PSI) 220 bar (39 PSI) 250 bar (3626 PSI) PRESSURE DROP CART Pressure drop ΔP (PSI) FEMALE PLATE W Flow rate (l/min) Flow rate (GPM) MALE PLATE Pressure drop ΔP (bar) [ bar = 0. MPa] SERIES DUO 25 DN25 - " DN 9-3/4" DN2.5 - /2" and Trio 2.5 / Lube DN 2.5 - /2" DN0-3/8" W CEJN reserves the right to make changes without further notification. Check with an authorized CEJN distributor for availability and prices. All measurements are in mm. Please visit our website, www.cejn.com, for general maintenance tips.
Multi-Couplings - Multi-X Range Multi-X Duo Coupling size Connection Part No. Dim. Female plate Dim. Male plate No. of ISO DN Inch Dash lines Female plate Male plate Female plate Male plate L W 2 3 L W 2 3 WEO /2" WEO 3/8" 0 932 2000 0 932 2050 83 68 70 38 5 6 6 66 5 0 3/8" -06 G 3/8" (BSP) G 3/8" (BSP) 0 932 2200 0 932 2250 83 68 70 38 5 6 6 66 5 WEO 3/4" WEO /2" 0 932 200 0 932 205 98 76 79 39 5 38 32 73 5 2.5 /2" -08 G /2" (BSP) G /2" (BSP) 0 932 220 0 932 225 98 76 79 39 5 38 32 73 5 2 2.5 + 9 /2" + 3/4" -08 + -2 WEO 3/4" WEO /2" + 3/4" 0 932 6000 0 932 6050 2 94 83 45 5 82,5 50 70 5 WEO 3/4" WEO 3/4" 0 932 5002 0 932 5052 20 24 07 70 5 82 79 97 5 9 3/4" -2 G 3/4" (BSP) G 3/4" (BSP) 0 932 5202 0 932 5252 20 24 07 70 5 82 79 97 5 25 " -6 G " (BSP) G " (BSP) 0 932 7000 0 932 7050 9 24 89,3 5 6 73 80 77 6 Multi-X Trio 2.5 / Lube Coupling size No. of Connection Part No. Dim. Female plate Dim. Male plate ISO DN Inch Dash lines Female plate Male plate Female plate Male plate L W 2 3 L W 2 3 2.5 /2" -08 3 WEO 3/4" + M0 WEO /2" + M0 0 932 4003 0 932 4053 98 76 99 59 5 38 32 93 5 Multi-X Quattro Coupling size No. of Connection Part No. Dim. Female plate Dim. Male plate ISO DN Inch Dash lines Female plate Male plate Female plate Male plate L W 2 3 L W 2 3 0 3/8" -06 4 WEO /2" WEO 3/8" 0 932 3000 0 932 3050 83 68 88 55 5 6 6 83 5 G 3/8" (BSP) G 3/8" (BSP) 0 932 3200 0 932 3250 83 68 88 55 5 6 6 83 5 0+2.5 3/8"+/2" -06/-08 2+2 WEO /2"+3/4" WEO 3/8"+/2" 0 932 4000 0 932 4050 98 76 99 59 5 38 32 93 5 G 3/8"+G /2" (BSP) G 3/8"+G /2" (BSP) 0 932 4200 0 932 4250 98 76 99 59 5 38 32 93 5 2.5 /2" -08 4 WEO 3/4" WEO /2" 0 932 400 0 932 405 98 76 99 59 5 38 32 93 5 G /2" (BSP) G /2" (BSP) 0 932 420 0 932 425 98 76 99 59 5 38 32 93 5 2.5+9 /2"+3/4" -08+-2 2+2 WEO 3/4" WEO /2"+3/4" 0 932 5000 0 932 5050 20 24 07 70 5 82 79 97 5 G /2"+G 3/4" (BSP) G/2"+G 3/4" (BSP) 0 932 5200 0 932 5250 20 24 07 70 5 82 79 97 5 Multi-X exa Coupling size No. of Connection Part No. Dim. Female plate Dim. Male plate ISO DN Inch Dash lines Female plate Male plate Female plate Male plate L W 2 3 L W 2 3 WEO /2" WEO 3/8" 0 932 5006 0 932 5056 20 24 07 70 5 82 79 97 5 0 3/8" -06 6 G 3/8" (BSP) G 3/8" (BSP) 0 932 5206 0 932 5256 20 24 07 70 5 82 79 97 5 CEJN reserves the right to make changes without further notification. Check with an authorized CEJN distributor for availability and prices. All measurements are in mm. Please visit our website, www.cejn.com, for general maintenance tips.
Flat-Face Quick Couplings - X65 Range X65 Range - Premium ISO 6028 Flat-Face Quick Couplings DN5 (65), DN6.3 (265), DN0 (365), DN 2.5 (565), DN6 (665), DN9 (765), DN25 (065) QR-Code for X65 Series Minimize contamination of your hydraulic system Spill free disconnection igh performance Connect under residual pressure, only limited by your strength Temperature range:...-30 C +00 C (-22 F +22 F) Material seal:... Nitrile (NBR/PUR, other sealing materials on request) Material:... Steel (zinc-nickel, zinc passivation) Connectability:... Only limited by operator strength Disconnection under pressure:...not allowed Interchangeable with:...all brands dimensionally interchanging with ISO6028 Body Size Flow rate Max. working pressure Min. burst pressure Spillage @ Dia (mm)* Series @ ΔP = 3 Bar Connected Disconnected Connected Disconnected Disconnected ISO DN Inch Dash (l/min)** (GPM)** (bar) (PSI) (bar) (PSI) (bar) (PSI) (bar) (PSI) (ml) 2.0 5 /8" -02 65 7.5 2.0 720 0442 720 0442 800 2755 800 2606 6. 6.3 /4" -04 265 24 6.3 500 725 500 725 500 500 2755 0.02 9.7 0 3/8" -06 365 44.6 400 580 400 580 200 7404 200 7404 0.03 24.5 2.5 /2" -08 565 93 24.6 400 580 400 580 200 7404 200 7404 0.04 27.0 6 5/8" -0 665 39 36.7 400 580 400 580 200 7404 200 7404 0.06 30.0 9 3/4" -2 765 88 49.7 400 580 400 580 200 7404 200 7404 0.0 36.0 25 " -6 065 330 87.2 350 5076 350 5076 200 7404 200 7404 0. (**) If the application is constantly above this flow rate for the respective coupling size, a larger coupling size should be considered to avoid too high a pressure drop. The couplings can handle a much higher flow rate but there is a risk of heat build-up in the system. In general, surge flows above the normal flow rate are not a problem. (*) Diameter for easy identification of ISO6028 Flat-Face coupling size (see picture).. PRESSURE DROP CART Pressure drop ΔP (PSI) 72.5 0.5.5 2.6 4.5 29 43.5 58 87 6 000 264.2 900 800 2.3 237.8 700 83.7 600 58.5 500 32. 400 05.7 300 79.3 Dia (*) 200 52.8 Flow rate (l/min) 00 90 80 70 60 50 40 30 065 765 665 565 26.4 23.8 2. 8.4 5.9 3.2 0.6 7.9 Flow rate (GPM) 20 5.3 365 0 2.6 265 5 65 0. 0.5 2 3 4 5 6 7 8 Pressure drop ΔP (bar) [ bar = 0. MPa].8.3 0.26 SERIES 65 /8 265 /4 365 3/8 565 /2 665 5/8 765 3/4 065 CEJN reserves the right to make changes without further notification. Check with an authorized CEJN distributor for availability and prices. All measurements are in mm. Thread connections are listed according to ISO Standards. Other connections on request. Please visit our website, www.cejn.com, for general maintenance tips.