Max. I/min - bar When an all-in-one solution matters Reduction of reservoir accessories The Tanktopper Series features an integrated, micron Abs. air breather. Maximum pressure bar. Maximum flow l/min. LEIF elements available. An all-in-one, easy-to-mount filter range for more compact tank design. AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF Contact Information: European Product Information Centre Freephone: 8 34 (from AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE, IT, PT, SE, SK, UK) filtrationinfo@parker.com Product Features: Tanktopper offers a total filtration solution with integrated air breather. In-to-Out filtration plus gauge and switch options. Maximum pressure bar. Maximum flow l/min. Patented LEIF elements safeguard filtration quality. www.parker.com/hfde FDHBUK. FDHBUK/Tanktopper Geeve Hydraulics Catalog Hydraulic and Heavy Duty Filtration & Contamination Control
Features & Benefits Features Return line filter with Integrated airbreather Airbreather equipped with high quality labyrinth Second port and dipstick available Airbreather element always supplied with spare return line filter elements LEIF elements Magnetic pre-filtration In-to-Out filtration Full flow bypass with low hysteresis Standard or customised funnel Advantages All in one filter No oil leakage through the airbreather Filler port and level indicator function can be integrated in filter Both filter elements can be replaced during the service event Element safeguards the use of genuine parts Removes ferrous particles, even during bypass conditions All captured contamination retains inside the element Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element Ensures that oil enters the tank under the oil level Benefits More compact design, cost reduction due to elimination of loose airbreather Improved efficiency of airbreather No oil leakage on the tank / in the environment Significant reduction of reservoir accessories Improved protection of system due to change of airbreather element Guaranteed quality of filtration Contributes to ISO 4 certification Improved fluid cleanliness levels Extended element life time No recontamination of system during change of elements Improved protection of system Significant reduction of oil foaming Typical Applications TPR I Fork lift trucks Power packs Mini excavator TPR II Gully-sucker Power packs Dredging ships TPR III Mobile cranes Refuse vehicles The Parker Filtration Tanktopper Series I, II & III. The TPR Series I, II & III offer a total filtration solution. A -micron Abs. air breather that is integrated into the filter housing, a magnet column for pre-filtration, In-to-Out filtration, a full-flow bypass with low hysteresis, and the high performance Q3 filter element materials are all proven success factors in efficient return-line filtration for flow rates up to l/min. Several pressure gauges and switches can be applied, combined or not with a dipstick. The all-in-one, easy-to-mount cost-saving TPR solution allows for a more compact tank design. FDHBUK. FDHBUK/Tanktopper Geeve Hydraulics Catalog Hydraulic and Heavy Duty Filtration & Contamination Control
Specification Operation pressure: Max. bar. Assembly: Tank top mounted. Connections: Threaded BSP or SAE ports. Second return port available for Tanktopper II and Tanktopper III. Filter housing: Aluminium head and co-polymer cover. Seal material:, Fluoroelastomer. Operation temperature range: -4 to +8 C. Bypass setting: Opening pressure.8,. or. bar for Tanktopper I. Opening pressure. bar for Tanktopper II and III. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimum fatigue life is achieved. Filtration media: Microglass III, Ecoglass III for LEIF element. Air breather micron Abs. Also available µm Cellulose and 4µm stainless steel mesh. (TPR) Element burst rating: bar (ISO 94). Pressure indicator options: Setting. or. bar. Other settings. Visual pressure gauge. Electrical pressure switch. Options: Dipstick Second port (only for TPR II and III) Magnetic pack: Optional for Tanktopper I. Standard for Tanktopper II and III. Filter element: LEIF element with reusable metal element sleeve. Conventional style element with steel end caps only optional for Tanktopper I. The LEIF element is patented and safeguards the use of genuine parts. Note: LEIF element can be used with mineral and HEES type oils. For other fluids consult Parker Filtration. LEIF contributes to ISO 4 quality standards Tanktopper I (length and ) F Free element clearance (.) 3 H (3.3) D 33 (.3) (.9) 4±. (±.) Mounting hole (.9) M8 Ø (.8) Ø (.4). 3. R Min.8mm (3.) Max oil-level Min.8mm (3.) -max.4 3 4 8 4 () (.4) NOM.Ø (.98) Indicator * For filter with air breather: In order to keep the minimum required distance under all circumstances, it is recommended to position the filter in the middle of the reservoir 4 4 (.) G /8 ISO 8(BSP) G /8 ISO 8(BSP) R (.4) Ø9 (.3) Max. torque-load filter-tank 8 Nm Pitch 9 3 Length H F D 9 G 3 /4 TPR-4 (.) (.3) (BSP) 9 TPR-8 (.) (.3) SAE Dimensions in mm 9 Tanktopper I Ref. No. Description Cover Magnet-set 3 Cover-seal 4 Bridge (blue) LEIF Element Sleeve Funnel-assembly 8 Filter-housing 9 Housing-seal Airguide Cover airbreather Breather-element 3 Dipstick assembly FDHBUK. FDHBUK/Tanktopper Geeve Hydraulics Catalog Hydraulic and Heavy Duty Filtration & Contamination Control 3
Specification (cont.) Tanktopper II (length, and ) (3.94) 4 (.9) (D) (D) 44 (.3) 4xM 4xM8 (Min. mm) (3.94) 8 (3.3) (4.3) F Oil level Max oil level Free element clearance Free element clearance +. Mounting hole 4x9 on pitch circle Ø4 Torque-load max. 8 Nm (.) Ø4 (.) ISO 8 G /8 (BSP) (.3) Top view 3 (.3) (H) 4x on pitch circle 8 ISO 8-G/8 (BSP) Torque-load max. Nm (4.33) (4.33) Second port optional 3. Tanktopper III (length and ) (H) Second port optional 3..3 Max oil level.3 + Mounting hole Ø4 (.) (.) Length Length (Port) G /4 G / SAE SAE 4 (Min. mm) (3.94) ( -max.3 ) For filter with * air breather: In order to keep the minimum required distance under all circumstances, it is recommended to position the filter in the middle of the reservoir D (BSP) (BSP) H F 8 TPR- (.) (.) TPR- (.) (.3) 4 38 TPR - (.) (4.9) Dimensions in mm For filter with air breather: * In order to keep the minimum required distance under all circumstances, it is recommended to position the filter in the middle of the reservoir D H F TPR3-4 TPR3- -G / 4 34 (BSP) (.34) (3.8) -G / 3 (BSP) (3.) (.8) Dimensions in mm 3 4 8 9 3 3 4 8 9 4 4 Tanktopper II & III Ref. No. Description Hexagon socket bolt M8 Air breather cap 3 Air breather filter medium 4 Cover (assembly) Cover seal Bridge Magnet set 8 Element 9 Sleeve Filter house Airguide Tank gasket 3 Funnel 4 Dipstick assembly (4.3) Oil level (Min. mm) (3.94) -max.4 3 3 (.) Ø4 (.) Top view 4 FDHBUK. FDHBUK/Tanktopper 4 Geeve Hydraulics Catalog Hydraulic and Heavy Duty Filtration & Contamination Control
Tanktopper Series I & II Pressure Drop Curves - Tanktopper I Filter housing and element pressure drop based on 3cSt fluid viscosity and.8 density. TPR4 Empty Housing (Length code ) 3 4 8 9 3. TPR8 Empty Housing (Length code ) 3 8 3 8 4......... 3 3 4 4 TPR4 (Element length code ) 3 4 8 9 TPR8 (Element length code ) 3 4 8 9 3.4.3 3 8 3 8 4.4.3. Q. 4.. Q. 4..8..4. Q Q Q..8..4. Q Q Q. 3 3 4 4 3 4 8 9 TPR4 (Element length code ) (cellulose and stainless steel) TPR8 (Element length code ) (cellulose and stainless steel) 3 4 8 9 3.. 3 8 3 8 4...8..8...4. C 4W.8.8.9..4. C 4W.8.8.9 3 3 4 4 Pressure Drop Curves - Tanktopper II 3 4 8 9 Filter housing and element pressure drop based on 3cSt fluid viscosity and.8 density. TPR II Empty Housing with G /4 ports TPR II Empty Housing with G / ports (Length code, and ) (Length code, and ) 3 3 4. 3 3 4 4 3 8 4 9......... 4 8 4 4 8 4 8 4 FDHBUK. FDHBUK/Tanktopper Geeve Hydraulics Catalog Hydraulic and Heavy Duty Filtration & Contamination Control
Tanktopper Series II & III Pressure Drop Curves - Tanktopper II (cont.) Filter housing and element pressure drop based on 3cSt fluid viscosity and.8 density. TPR (Element length code ) TPR (Element length code ) 3 3.8.. Q. Q..4 Q.3. Q. 4 8 4..3 4.4. 3 39 3 9.9 3..8 Q.. Q..4 Q.3. Q. 3...3 4.4. TPR (Element length code ) 3 39 3 9.8......4.3.. Q Q Q Q.3 4.4. Pressure Drop Curves - Tanktopper III 3 Filter housing and element pressure drop based on 3cSt fluid viscosity and.8 density. TPR III Empty Housing with G / ports (Length code and ) 3 39 3 9 9 9 3 4 9 8 98 4..9.8....4.3.. 3 3 4 4 8 8. TPR4 (Element length code ) TPR (Element length code ). 3 9 3 9 8.4 Q 4.. 3 9 3 9 8 38.4 Q 4..8..4. Q Q Q..8..4. Q Q Q. 3 4 3 4 8 9 FDHBUK. FDHBUK/Tanktopper Geeve Hydraulics Catalog Hydraulic and Heavy Duty Filtration & Contamination Control
Ordering Information Standard products table Part number Supersedes TPRQLBPEGE TPR4-G 3 /4 PXWL- B MM MA TPRQLBPEGE TPR4-G 3 /4 PXWL- B MM MA TPRQLBPEGL TPR8-G 3 /4 PXWL- AB MM MA TPRQLBPEGL TPR8-G 3 /4 PXWL- AB MM MA TPRQLBPEG TPR-G /4 PXWL3- B MM TPRQLBPEG TPR-G /4 PXWL3- B MM TPRQLBPEG4 TPR-G / PXWL4A- B MM TPRQLBPEG4 TPR-G / PXWL4A- B MM TPRQLBPEG4 TPR-G / PXWL8- B MM TPRQLBPEG4 TPR-G / PXWL8- B MM Flow (l/min) 4 4 8 8 Model number Element length TPR4 Length TPR4 Length TPR8 Length TPR8 Length TPR Length TPR Length TPR Length TPR Length TPR Length TPR Length Media rating (µ) Seals Indicator Bypass settings Ports G 3 /4 G 3 /4 G 3 /4 G 3 /4 Included options Magnets Magnets Aluminium funnel, magnets Aluminium funnel, magnets xg /4 xg /4 xg / xg / xg / xg / Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above. Replacement elements 939Q 9394Q 9393Q 939Q 9389Q 9389Q 93894Q 9389Q 9394Q 939Q Supersedes PXWL- PXWL- PXWL- PXWL- PXWL3- PXWL3- PXWL4A- PXWL4A- PXWL8- PXWL8- Visual indicator Thread connection G /8 FMUGEBPGL Specifications Elec.rating 4V / A Thread connection G /8 Elec.connection AMP terminal.3x.8 Protection IP (terminal IP) Switch type NO or NC FMUSEBMGL (NO switch) FMUS3EBMGL (NC switch) Normally open contacts Normally closed contacts Product configurator Configurator example TPR filter Box TPR Box Box 3 QL Box 4 B Box S Box E Box G Box 8 L Box TPR Box Filter type Housing TPR -4 TPR -8 TPR - TPR - TPR - TPR 3-4 TPR 3- Box 3 Element media Disposable element (TPR I only) LEIF element (for all TPR Filters) Cellulose Nom. rating C Degree of filtration Glass fibre Microglass III (for disposable elements) Ecoglass III (for LEIF elements) Q QL Q QL Q QL Q QL Wire mesh Abs. rating 4W Box 4 Seal type Seal material Fluoroelastomer B Box Indicator Pressure gauge, setting. bar, G /8 Pressure switch 4V,. bar setting, NO with G /8 Pressure switch 4V,. bar setting, NC with G /8 Pressure switch V, NO/NC with G /8 No indicator, indicator ports not machined No indicator, indicator port R plugged No indicator, indicator ports L + R plugged Other settings for indicators / gauges G S S3 S4 P Box Bypass valve Bypass valve.8 bar. bar. bar (TPR Series only) Other bypass settings B E Note : Part numbers featured with bold highlighted codes will ensure a standard product selection. Note : Alternate displayed part number selection will require you to contact Parker Filtration for availability. Box Filter connection Ports G 3 /4 (BSP) (TPR Series) SAE (TPR Series) G /4 (BSP) (TPR Series) x ISO 8-G /4 (BSP) (TPR Series) SAE (TPR Series) x SAE (TPR Series) SAE 4 (TPR Series) x SAE 4 (TPR Series) G / (BSP) (TPR and 3 Series) x G / (BSP) (TPR and 3 Series) G S G G S S S4 S4 G4 G4 Box 8 Options Options Standard Dipstick Aluminium funnel for TPR -8 Magnets for TPR Series Magnets + Dipstick for TPR Series Magnets + Aluminium Funnel for TPR 8 Series Magnets + Aluminium Funnel + Dipstick for TPR 8 Series Other combinations J E K L M Note: Tanktopper I Series are standard supplied with POM type funnel. Aluminium funnel is recommended for heavy duty applications, sensitivity for electrostatically charging or high fluid temperatures. Tanktopper II and III Series are always supplied with metal funnel. Highlights Key (Denotes part number availability) 3 3 3 3 Item is standard Item is standard green option Item is semi standard Item is non standard FDHBUK. FDHBUK/Tanktopper Geeve Hydraulics Catalog Hydraulic and Heavy Duty Filtration & Contamination Control
Ordering Information (cont.) ßx(c)=.% Degree of filtration Average filtration beta ratio ß (ISO 889) / particle size µm [c] ßx(c)= ßx(c)= ßx(c)= ßx(c)= ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% 9% 4. 8. 99.% 9 8 99.% 99.9% 4. Media code Q/QL Q/QL Q/QL Q/QL TPR -4 TPR -8 TPR - TPR - TPR - TPR 3- TPR 3-4 TPR 3- Supersedes spare element table PXWL- 93898Q PXWL- 93899Q PXWL3-9388Q PXWL4-9388Q PXWL4A- 93888Q PXWL- 939Q PXWL- 939Q PXWL8-9398Q PXWL- 939Q PXWL- 939Q PXWL3-93889Q PXWL4-9389Q PXWL4A- 9389Q PXWL- 9399Q PXWL- 939Q PXWL8-939Q PXWL- 939Q PXWL- 9393Q PXWL3-9389Q PXWL4-93893Q PXWL4A- 93894Q PXWL- 939Q PXWL- 9393Q PXWL8-9394Q PXWL- 9394Q PXWL- 939Q PXWL3-9389Q PXWL4-9389Q PXWL4A- 9389Q PXWL- 939Q PXWL- 939Q PXWL8-939Q TPR -4 TPR -8 TPR 3- TPR 3- TPR 3-4 Supersedes spare element table PXXA- 9398 PXXA- 9399 PXWA- 939Q PXWA- 939Q PXW- 939Q PXW- 9393Q PXW- 9394Q PXWA- 939Q PXWA- 939Q PXW- 939Q PXW- 9398Q PXW- 9399Q PXWA- 9393Q PXWA- 9393Q PXW- 9393Q PXW- 93933Q PXW- 93934Q PXWA- 9393Q PXWA- 9393Q PXW- 9393Q PXW- 93938Q PXW- 93939Q PSA-4 9394 PSA-4 9394 Tank Topper Series Seal Kits Part Number Description 49 NITRILE SEAL KIT TPR AG FUNNEL ALU 49 NITRILE SEAL KIT TPR AG FUNNEL POM 493 NITRILE SEAL KIT TPR NO AG FUNNEL ALU 49 NITRILE SEAL KIT TPR NO AG FUNNEL POM 49 NITRILE SEAL KIT TPR B 49 NITRILE SEAL KIT TPR3 B AG = Air Guide 8 FDHBUK. FDHBUK/Tanktopper 8 Geeve Hydraulics Catalog Hydraulic and Heavy Duty Filtration & Contamination Control