SAI Global hereby grants: ABN 62093801220 7 Inglewood Drive, Thomastown, VIC 307, Australia WaterMark Certificate of Conformity Level 1 Evaluated to: AS 5081-2008 - Hydraulically automatic control valves for waterworks purposes the WaterMark Licensee the right to use or arrange the use of the WATERMARK as shown below only in respect of the goods described and detailed on the product schedule identified on wwwsaiglobalcom which are produced by the WaterMark Licensee or on behalf of the WaterMark Licensee* and which comply with the appropriate Standard referred to above as from time to time amended The Licence is granted subject to the rules governing the use of the WATERMARK and the Terms and Conditions for certification The WaterMark Licensee covenants to comply with all the Rules and Terms and Conditions Certificate No: WMK25537 Issued : 11 November 2013 Originally Certified : 1 October 2013 Expires : 30 September 2018 Current Certification : 11 November 2013 Paul Butcher Global Head Assurance Services Samer Chaouk Head of Policy, Risk and Certification The WATERMARK is a registered certification trademark of Standards Australia Limited (ACN 087 326 690) and is issued under licence by SAI Global Certification Services Pty Limited (ACN 108 716 669) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to wwwsaiglobalcom for the list of product models
SAI Global hereby grants : 7 Inglewood Drive, Thomastown, VIC 307, Australia WaterMark Certificate of Conformity Level 1 Evaluated to: AS 5081-2008 - Hydraulically automatic control valves for waterworks purposes Model identification of the goods on which the WATERMARK may be used: Model 710 718 720 730 7 is by a solenoid is by two two-way solenoid s reduces high inlet to a lower outlet by pressurereducing inlet by pressure sustaining A special type of pressurerelief valve, used to protect pumping stations and pipelines under a sudden pump stopping condition (eg, due to power failure) Type Single Solenoid Dual Solenoid Fixed Outlet Reducing Sustaining Surge Anticipating Size (DN) PN PN PN PN PN Certificate No: WMK25537 Issued : 11 November 2013 The WATERMARK is a registered certification trademark of Standards Australia Limited (ACN 087 326 690) and is issued under licence by SAI Global Certification Services Pty Limited (ACN 108 716 669) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to wwwsaiglobalcom for the list of product models 3 Page 1 of 2
Model 73Q 70 750-60 750-66 750-80 770 inlet by pressure relief The valve controls the operation of booster pumps and allows flow in only one direction controls level into a tank by float-controlled, in order to maintain the range controls level into a tank by float-controlled, in order to maintain the range controls level into a reservoir by means of an altitude, in order to maintain the range maintains the flow set-point, irrespective of any variation of inlet or outlet pressure, by rate-of-flow Type Relief Pump Level (Pilot Type 60) Level (Pilot Type 66) Altitude Rate-of-flow Size (DN) PN PN PN PN PN PN End of Record Certificate No: WMK25537 Issued : 11 November 2013 2 Registered by: The WATERMARK is a registered certification trademark of Standards Australia Limited (ACN 087 326 690) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 and is issued under licence by SAI Global Certification Services Pty Limited (ACN 108 716 669) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to wwwsaiglobalcom for the list of product models 3 Page 2 of 2
SAI Global hereby grants: ABN 62093801220 7 Inglewood Drive, THOMASTOWN, VIC 307, Australia StandardsMark Licence Manufactured to: AS 5081-2008 - Hydraulically automatic control valves for waterworks purposes "the StandardsMark Licensee" the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on behalf of the Licensee* and which comply with the appropriate Standard referred to above as from time to time amended The Licence is granted subject to the rules governing the use of the STANDARDSMARK and the Terms and Conditions for certification and licence The Licensee covenants to comply with all the Rules and Terms and Conditions Licence No: SMKP22015 Issued : ember Originally Certified : ember Expires : 20 November 2016 Current Certification : ember Duncan Lilley Global Head Assurance Services Alex Ezrakhovich General Manager Certification Services Page 0 of 3 The STANDARDSMARK is a registered certification trademark of SAI Global Limited (ACN 050 6 62) and is issued under licence by SAI Global Certification Services Pty Limited (ACN 108 716 669) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to wwwsaiglobalcom, for the list of product models
SAI Global hereby grants: 7 Inglewood Drive, THOMASTOWN, VIC 307, Australia StandardsMark Licence Manufactured to: AS 5081-2008 - Hydraulically automatic control valves for waterworks purposes Model identification of the goods on which the STANDARDSMARK may be used: Model 710 718 720 730 is by a solenoid is by two twoway solenoid s reduces high inlet to a lower outlet by pressurereducing inlet by pressure sustaining Type Single Solenoid Dual Solenoid Fixed Outlet Reducing Sustaining Size (DN) AS3688 AS3688 AS3688 AS3688 AS AS AS AS Licence No: SMKP22015 Issued : ember The STANDARDSMARK is a registered certification trademark of SAI Global Limited (ACN 050 6 62) and is issued under licence by SAI Global Certification Services Pty Limited (ACN 108 716 669) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to the Schedule for the list of product models Page 1 of 3
Model 7 73Q 70 750-60 750-66 A special type of pressurerelief valve, used to protect pumping stations and pipelines under a sudden pump stopping condition (eg, due to power failure) inlet by pressure relief The valve controls the operation of booster pumps and allows flow in only one direction controls level into a tank by floatcontrolled, in order to maintain the water level within a set range controls level into a tank by floatcontrolled, in order to maintain the water level within a set range Type Surge Anticipating Relief Pump Level (Pilot Type 60) Level (Pilot Type 66) Size (DN) AS3688 AS3688 AS3688 AS3688 AS3688 AS AS AS AS AS Licence No: SMKP22015 Issued : ember The STANDARDSMARK is a registered certification trademark of SAI Global Limited (ACN 050 6 62) and is issued under licence by SAI Global Certification Services Pty Limited (ACN 108 716 669) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to the Schedule for the list of product models Page 2 of 3
Model 750-80 770 controls level into a reservoir by n altitude, in order to maintain the range maintains the flow setpoint, irrespective of any variation of inlet or outlet pressure, by rate-of-flow Type Altitude Rate-of-flow Size (DN) AS3688 AS3688 AS AS End of Record Licence No: SMKP22015 Issued : ember The STANDARDSMARK is a registered certification trademark of SAI Global Limited (ACN 050 6 62) and is issued under licence by SAI Global Certification Services Pty Limited (ACN 108 716 669) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to the Schedule for the list of product models Page 3 of 3