GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 (0) 9402-9383 - 0 Fax - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Handheld Instruments Characteristics System Measurands handheld measuring device in a set ph / ORP Temperature Pressure Conductivity Applications Laboratory equipment Food industry Beverage industry Pharmaceutic industry Chemical industry Water analysis Quality control and assurance Mobile analysis and measuring technology Monitoring of production processes pi-gr-_e V1.00-00 1
GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 (0) 9402-9383 - 0 Fax - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Features * Each set includes a complete measuring set containing the following components: Advantages * Water-proof handheld instrument High-quality case Flash drive with operating software and manual USB adapter and cable with connection for analog output Manufacturer's calibration at delivery Gratis manufacturer's calibration after 1 year with automatic reminding from our calibration laboratory Robust and water-proof housing Water-proof connectors and water-proof probes, sensors or electrodes (depending on set type) Data logger function Serial interface and analog output Silicone protective cover Large double display Background illumination Several measurands All essential components in one case Accessories like e.g. water-proof ph electrode and buffer solutions or water-proof temperature probe (depending on set type) * except SL-Pt eco The temperature device has reduced range of functions (data logger, analog output, etc.). 2 pi-gr-_e V1.00-00
GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 (0) 9402-9383 - 0 Fax - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Device Overview Type Measurand Measuring range Page SL-pH Set ph ORP Temperature rh -2.000..+16.000 ph -2000.0..+2000.0 mv -5.0..+150.0 C / 23.0..302.0 F 0.0..70.0 rh SL-Pt eco Set Temperature -200.0..+250.0 C 7 SL-P Set Pressure -1.999..2.500 mbar to 0..1000 bar depending on sensor SL-C Set Conductivity Preliminary information Available in 3 rd Quarter 2012 Mistakes reserved, technical specifications subject to change without notice. 4 8 12 pi-gr-_e V1.00-00 3
Measuring Set ph / ORP SL-pH Set Connection ph / ORP Temperature Interface / supply Display ph calibration perm. electrode data : BNC socket, compatible for standard or water-proof BNC plugs, additionally banana sockets (4 mm) for separate reference electrode, input resistance: 10 12 Ohm : 2 banana sockets (4 mm) for temperature probes (Pt1000 or NTC 10K) : 4-pole bayonet socket for serial interface and supply : two 4½-digit 7-segment displays (15 mm and 12 mm) : asymmetry: ±55 mv slope: -62..-45 mv/ph Buffer type is automatically detected. Temperature dependency of buffer is automatically compensated. ph electrode's state is rated at calibration. 1-, 2- or 3- point calibration are provided, use of GHM standard buffers or buffers according to DIN19266 or manual buffer input is possible. Water-proof and impact-resistant handheld instrument Water-proof ph electrode and temperature probe Buffer solutions in dosing bottles (ph 4, ph 7, ph 10) Software for operating, adjusting, data read-out, etc. USB adapter and cable High-quality case Manufacturer's calibration with certificate Gratis manufacturer's calibration after 1 year with automatic reminding from our calibration laboratory Characteristics The SL-pH measures the ph value, ORP, temperature and rh. Particular features are the min/max value memory and the holdfunction, low power consumption and adjustable auto-off function, cyclic logging with storage of up to 10.000 data sets and the logging of single values, an analog output and the large illuminated 4½-digit display. The device can be optimized to its specific application by means of menu-driven adjustment possibilities. It provides automatic and manual calibration (1-, 2- and 3- point calibration). You can choose to use standard or DIN buffers at automatic calibration. Housing, connectors and probes are water-proof. Technical data Handheld measuring device SL-pH Measuring ranges ph : -2.000..+16.000 ph ORP / mv : -2000.0..+2000.0 mv Temperature : -5.0..+150.0 C / 23.0..302.0 F rh : 0.0..70.0 rh Accuracies ph : ±0.005 ph ORP / mv : ±0.05 % FS (mv or mv H) Temperature : ±0.2 C rh : ±0.1 rh ORP measurement : 2 choices: mv standard ORP or mv measurement mv H conversion to hydrogen system according to DIN38404 part 6 rh measurement : by means of measurement of ORP value and input of ph value the rh value is calculated Protection class : IP67 (housing and connectors) Housing : made of impact-resistant ABS with stand incl. silicone protective cover Power supply : 2 x AAA batteries (included) current consumption <1.0 ma Battery life : approx. 1000 hours Dimensions : 160 x 86 x 37 mm (H x W x D) incl. protective cover Weight : 250 g incl. battery Functions Min/max value memory Highest and lowest measured value are saved. Hold / auto-hold Automatic stability of measuring value -detection Auto-off function Device is automatically turned off after a selected period (0..120 min., function can be deactivated). Rating display for ph electrode's and battery's state Bargraph Change battery indicator BAT Background illumination Duration adjustable (on / off or 5 s to 2 min) Automatic temperature compensation Adjustable calibration intervals (GLP) Calibration memory (GLP) The last 16 calibrations are saved. Serial interface Connection: 4-pole bayonet socket Analog output 0..1 V freely scalable, connection: 4-pole bayonet socket, resolution: 13 bit, accuracy: ±0.05 % at nominal temperature Data logger with measuring point input, recording interval: 1 s to 1 h, recording duration: 416 days at interval 1 h, memory: cyclic: 10.000 data sets, single: 1000 data sets Real-time clock continued on next page 4 pi-gr-_e V1.00-00
Min/max alarm Permanent monitoring of alarm boundaries, 3 alarm settings - off: alarm function deactivated - on: alarming via display, internal buzzer and interface - no Sound: alarming via display and interface Software GSOFT 3050 and GMHKonfig ph electrode and temperature probe SE100 The measuring set includes a robust and water-proof ph electrode with integrated Pt1000 temperature sensor. Specifications: Measuring ranges: ph : 0..14 ph Temperature : -5..+80 C Shaft : diameter 12 mm length 120 mm Reference system : Ag/AgCl Reference electrolyte : Gel (KCI), low-maintenance, not refillable Temperature sensor Connection Buffer solutions SPHL : Pt1000 : 1 m cable with BNC plug and banana plug Buffer solutions SPL 4: ph 4 (red) : ph 4.01 (25 C) ±0,015 SPL 7: ph 7 (green) : ph 7.00 (25 C) ±0,015 SPL 10: ph 10 (blue) : ph 10.01 (25 C) ±0,030 Buffer solutions each in a 250 ml dosing bottle, tamperproof closure 28 mm, dosage volume 20 ml and 25 ml. Deionized water SDW500 Deionized water for rinsing electrode after/during calibration or after soiling. water in 500 ml dosing bottle, tamperproof closure 28 mm, dosage volume 20 ml and 25 ml. KCl electrolyte SKCL 100 ml KCl electrolyte, 3 molar for refilling the protection cap of the electrode. The software to operate the logger function of handheld measuring devices. The logger recording can be started and stopped and the logger data can be read-out and visualized. The multilingual software is executable with Windows 98, Me, NT, 2000, XP, Vista and 7. The data is read-out via USB interface of a PC by means or an USB adapter and cable (included). Display of status information Setting of alarm function Operation of logger function Diagram display of logger data Logger data print-out Saving of logger data Export of logger data to ASCII (Text, usable for MS Excel ) Memorizing of window settings GMHKonfig The software to configurate the logger function of handheld measuring devices. It automatically determines the type of connected devices and provides the suitable functions. Device configuration Logger ID setting Initialization of menu parameters etc. Adapter and cable SL-USB Electrically isolated interface converter supplied via USB incl. connection for analog output Case SKK 2019 High quality case made of robust PP incl. rigid foam insert with aligned cut-outs. Dimensions : 450 x 360 x 140 mm (H x W x D) Manufacturer's calibration WSP3 / WSP10 Calibration certificate WSP3 WSP10 : included to set / voucher 3 calibration points ~4.00 ph, ~6.87 ph, ~9.18 ph : optional, for an additional charge 10 calibration points from ~1.09 ph to ~12.75 ph continued on next page pi-gr-_e V1.00-00 5
Ordering code SL-pH Set Scope of delivery SL-pH (portable ph / ORP measuring device), SE100 (ph electrode with integrated Pt1000 temperature sensor), SKK 2019 (case incl. insert), SL-USB (adapter and cable), flash drive with GSOFT 3050 (software), SPHL (buffer solutions ph4, ph7, ph10; each 250 ml), SKCL (KCl electrolyte; 100 ml), SDW500 (deionized water), WSP3 (calibration certificate), voucher worth 1x WSP3, operating manual, short manual Spare parts SE100 : ph electrode with temperature sensor SPHL4 : buffer solution ph 4, 250 ml SPHL7 : buffer solution ph 7, 250 ml SPHL10 : buffer solution ph 10, 250 ml SDW500 : deionized water, 500 ml SKCL : KCl electrolyte, 100 ml WSP3 : calibration certificate 3 calibration points WSP10 : calibration certificate 10 calibration points Other set parts upon request Accessories GEH 1 Electrode holder suitable for electrodes with plastic handle 6 pi-gr-_e V1.00-00
Measuring Set Temperature SL-Pt eco Set Weight : 220 g incl. battery and probe Functions Min/max value memory Highest and lowest measured value are saved. Hold / auto-hold Automatic stability of measuring value -detection Auto-off function Device is automatically turned off after a selected period (0..120 min., function can be deactivated). Change battery indicator BAT Calibration (offset and slope) Temperature probe The measuring set includes a robust and water-proof Pt1000 temperature probe that is permanently connected to the device. Water-proof and impact-resistant handheld instrument (with silicone protective cover) Water-proof temperature probe High-quality case Manufacturer's calibration with certificate Gratis manufacturer's calibration after 1 year with automatic reminding from our calibration laboratory Characteristics The SL-Pt eco measures the temperature by means of a potential-free Pt1000 probe. Both probe handle and cable are made of Teflon to allow usage at temperature up to 250 C. Housing and probe are water-proof. Particular features are the high accuracy, the min/max value memory,the hold-function, low power consumption and adjustable auto-off function. The application of SL-Pt eco include laboratory measurement technology, quality management and monitoring production processes in medical, pharmaceutical and food industry. Technical data Handheld measuring device SL-Pt eco Measuring range : -200.0..+250.0 C Resolution : 0.1 C Accuracy at -20.0..+100.0 C : ±0.1 C ±1 digit at -70.0..+200.0 C : ±0.1 % of m.v. ±2 digit Response time T 90 : approx. 10 s Display : two 4-digit LCD displays (12.4 mm and 7 mm) Power supply : 2 x AAA batteries Battery life : > 6000 hours Protection class : IP65 / IP67 Dimensions : 160 x 86 x 37 mm (H x W x D) incl. protective cover Specifications: Sensor element Handle Case SKK 2007 : Pt1000, 2-wire, potential-free water-proof and vapor-tight, attached to device Ø 3 mm / length: 100 mm : handle made of Teflon with 1 m Teflon cable with kink protection made of stainless steel, suitable for permanent temperatures up to 250 C High quality case made of robust PP incl. rigid foam insert with aligned cut-outs Dimensions : 340 x 275 x 83 mm (H x W x D) Manufacturer's calibration WST3 Calibration certificate WST3 Ordering code SL-Pt eco Set Scope of delivery : included to set / voucher 3 calibration points -20 C, 0 C, +70 C other calibration points upon request SL-Pt eco (portable temperature measuring device incl. probe), SKK 2007 (case incl. insert), WST3 (calibration certificate), voucher worth 1x WST3, operating manual, short manual Spare parts WST3 : calibration certificate, 3 calibration points pi-gr-_e V1.00-00 7
Measuring set pressure SL-P set Water-proof and impact-resistant handheld instrument Pressure sensors Software for operating, adjusting, data read-out, etc. USB adapter High-quality case Manufacturer's calibration certificate Gratis manufacturer's calibration after 1 year with automatic reminding from our calibration laboratory Characteristic The SL-P is used for pressure measurement with plug-in probes. Particular features are the min/max value memory and the holdfunction, cyclic logging with storage of up to 10000 data sets and the logging of single values, an analog output and the large illuminated 4½-digit display. The sensors made of plastic and made of stainless steel for absolute or relative pressure measurements can be used as plug-in probe. Housing and connectors are water-proof. Display unit Measuring frequency Accuracy Display Protection class Housing Power supply : depending on measuring range selection (depends on sensor) mbar, bar, Pa, kpa, MPa, mmhg, inhg, PSI, mh 2 O, or freely adjustable user unit : 4 measurements / s or 1000 measurements / s : ± 0.1 % FS ± 1 digit : two 4 ½ digit 7-segment displays (15 mm and 12 mm) : IP65 / IP67 (housing and connectors) : made of impact-resistant ABS with stand incl. silicone protective cover : 2 x AAA batteries (included) current consumption <2.0 ma Battery life : approx. 500 hours Dimensions : 160 x 86 x 37 mm (H x W x D) Weight : 250 g incl. battery Functions Min/max value memory Highest and lowest measured value are saved. Hold Value freeze at key press Auto-off function Device is automatically turned off after a selected period (0..120 min., function can be deactivated). Battery rating display bargraph, change battery indicator BAT Background illumination Duration adjustable (on / off or 5 s to 2 min) User defined display unit Conversion to arbitrary unit via linear factor Average filter selectable: 1... 120 s Leakage test / tightness test Display of pressure change rate (/s, /min, /h) Air velocity / volumetric flow Measurement with Pitot tube (accessories) Analog output 0..1 V freely scalable, connection: 4-pole bayonet socket resolution: 12 bit Data logger Measuring value memory: cyclic: 8.000 data sets, multiple recordings single point: 1.000 data sets (with measuring point input, 40 settable measuring point texts or measuring point numbers) Min/max alarm Permanent monitoring of alarm boundaries, 3 alarm settings: - off: alarm function deactivated - on: alarming via display, internal buzzer and interface - no Sound: alarming via display and interface Technical data Handheld measuring device SL-P Sensor Connections : 2 Sensor : 7-pole bayonet socket Output : 4-pole socket for serial interface and supply, analog output 0..1 V Suitable sensors : stainless steel or plastic sensors Measuring range : from -1.999..2.500 mbar (0.001 mbar) (resolution) to 0..1000 bar (1 bar) continued on next page 8 pi-gr-_e V1.00-00
Pressure sensors 1 or 2 sensors can be included to the set corresponding in accordance with customer's demands. Stainless steel press. sensors (without connection cable) Possible sensors: Plastic pressure sensors: (with connection cable) measuring range (max.) overload resolution Relative pressure sensors K01R -1.999..+2.500 mbar 200 mbar 0.001 mbar K02R -19.99..+25.00 mbar 300 mbar 0.01 mbar K03R -199.9..+350.0 mbar 1 bar 0.1 mbar K04R -1000..+2000 mbar 4 bar 1 mbar K05R -1.00..10.00 bar 10.34 bar 10 mbar Absolute pressure sensors K01A 0..1300 mbar 4 bar 1 mbar K02A 0..2000 mbar 4 bar 1 mbar K03A 0.00..7.00 bar 10.34 bar 10 mbar Specifications Sensor Pressure connection Electronics : piezoresistive pressure sensor : 2 connection pins for hose 6 x 1 mm (6 mm outer-ø and 4 mm inner-ø) : amplifier and storage for sensor data (measuring range, calibration, etc.) Accuracy Relative press. sensors : hysteresis / linearity: ± 0.15 % FS temp. influence (0..50 C) : ± 1.0 % FS Absolute press. sensors : hysteresis / linearity: ± 0.15 % FS temp. influence (0..50 C) : ± 0.4 % FS Working temperature : 0..50 C Relative humidity : 0..95 % RH (non condensing) Storage temperature : -40..+85 C Housing : made of ABS with suspension lug Dimensions : without connection pins: 68 x 32.5 x 15 mm (L x W x D), with connection pins: 68 x 32.5 x 27.5 mm(l x W x D) Weight Device connection : 75 g : 1 m PVC connection cable, screened, permanently fixed to 7-pole bayonet plug measuring range (max.) overload resolution Relative pressure sensors E01R -1000..+1500 mbar 10 bar 1 mbar E02R -1000..+3000 mbar 17 bar 1 mbar E03R 0.0..100.0 mbar 1 bar 0.1 mbar E04R 0.0..250.0 mbar 2 bar 0.1 mbar E05R 0.0..400.0 mbar 2 bar 0.1 mbar E06R 0..1000 mbar 5 bar 1 mbar E07R 0..2500 mbar 10 bar 1 mbar E08R 0..4000 mbar 17 bar 1 mbar E09R 0..6000 mbar 35 bar 1 mbar E10R 0.00..10.00 bar 35 bar 10 mbar E11R 0.00..25.00 bar 50 bar 10 mbar E12R 0.00..40.00 bar 80 bar 10 mbar E13R 0.00..60.00 bar 120 bar 10 mbar E14R 0.0..100.0 bar 200 bar 0.1 bar E15R 0.0..160.0 bar 320 bar 0.1 bar E16R 0.0..250.0 bar 500 bar 0.1 bar E17R 0.0..400.0 bar 800 bar 0.1 bar E18R 0.0..600.0 bar 1200 bar 0.1 bar E19R 0..1000 bar 1500 bar 1 bar Absolute pressure sensors E01A 0..1000 mbar 5 bar 1 mbar E02A 0..2500 mbar 10 bar 1 mbar E03A 0..4000 mbar 17 bar 10 mbar E04A 0..6000 mbar 35 bar 10 mbar E05A 0.00..10.00 bar 35 bar 10 mbar E06A 0.00..16.00 bar 80 bar 10 mbar E07A 0.00..25.00 bar 50 bar 10 mbar Specifications Sensor Pressure connection Electronics : pressure sensor made of stainless steel (parts in contact with measured media), suitable for aggressive media, water,... : Connection thread G ½B : amplifier and storage for sensor data (measuring range, calibration, etc.), electronics are encapsulated Accuracy Hysteresis / linearity : ± 0.15 % FS TK offset / slope : ± 0.15 % FS / K Temperature : -25..+100 C of measured media (compensated range: 0..70 C) Working temperature : -20..+80 C Storage temperature : -40..+80 C Housing Dimensions Weight Protection class Cable connection : made of CrNi-steel or Elgiloy (parts in contact with measured media) : 88.5 mm, Ø 27 mm : approx. 220 g : IP67 (sensor) : M16-panel plug Connection cable for st. steel pressure sensor EK01 PVC connection cable, screened, with 7-pole bayonet plug and M16-socket, cable and bayonet plug are water-proof acc. to IP67. Standard length: 1 m (length up to 10 m possible) continued on next page pi-gr-_e V1.00-00 9
Case SKK Scope of delivery High quality case made of robust PP incl. rigid foam insert with aligned cut-outs Manufacturer's calibration WSD5 / WSD10 Calibration certificate WSD5 : included to set and add. voucher 5 calibration points increasing, 5 decreasing WSD10 : optional, for an additional charge 10 calibration points increasing, 10 decreasing Software GSOFT 3050 and GMHKonfig Standard equipment: SL-P (portable pressure measuring device), 1 pressure sensor (plastic or stainless steel), SKK (case incl. insert), SL-USB (adapter and cable), lash drive with GSOFT 3050 (software), WSD5 (calibration certificate), voucher worth 1x WSD5, operating manual, short manual Optional: Second pressure sensor (plastic or stainless steel) incl. calibration certificate Spare parts: WSD5 WSD10 pressure sensors EK01 : Calibration certificate for 5 calibration points increasing, 5 decreasing : Calibration certificate for 10 calibration points increasing, 10 decreasing : all pressure sensor (plastic or stainless steel) acc. to table : PVC connection cable for stainless steel sensors, Standard length: 1 m (length up to 10 m possible) Accessories Prandtl pitot tube For air velocity / volumetric flow measurements The software to operate the logger function of handheld measuring devices. The logger recording can be started and stopped and the logger data can be read-out and visualized. The multilingual software is executable with Windows 98, Me, NT, 2000, XP, Vista and 7. The data is read-out via USB interface of a PC by means or an USB adapter and cable (included). Display of status information Setting of alarm function Operation of logger function Diagram display of logger data Logger data print-out Saving of logger data Export of logger data to ASCII (Text, usable for MS Excel ) Memorizing of window settings GMHKonfig The software to configurate the logger function of handheld measuring devices. It automatically determines the type of connected devices and provides the suitable functions. Device configuration Logger ID setting Initialization of menu parameters etc. GDZ-01 PVC hose 6/4 (6 mm outer-ø, 4 mm inner-ø) (5 bar at 23 C) GDZ-05 Screw-in connection for hose 6/4 with outer thread G ⅛ GDZ-07 Double nozzle for hose with 6 mm inner-ø to hose 6/4 GDZ-14 Screw-in nozzle for hose 6/4 with outer thread G ⅛ GDZ-16 Screw-in nozzle for hose 6/4 with outer thread G ¼ GDZ-18 Hose clamp for hose 6/4 GDZ-20 Screw-on gland made of brass for hose 6/4 with inner thread G ¼ GDZ-21 T-piece for hose 6/4 GDZ-23 Adapter G ½ inner thread to outer thread G ¼, made of brass Adapter and cable SL-USB Electrically isolated interface converter with device supply via USB incl. connection for analog output continued on next page 10 pi-gr-_e V1.00-00
Ordering code 1. 2. 3. 4. SL-P Set - - 1. Pressure sensor 1 K01R -1.999..+2.500 mbar rel. plastic K02R -19.99..+25.00 mbar rel. plastic K03R -199.9..+350.0 mbar rel. plastic K04R -1000..+2000 mbar rel. plastic K05R -1.00..10.00 bar rel. plastic K01A 0..1300 mbar abs. plastic K02A 0..2000 mbar abs. plastic K03A 0.00..7.00 bar abs. plastic E01R -1000..+1500 mbar rel. stainless steel E02R -1000..+3000 mbar rel. stainless steel E03R 0.0..100.0 mbar rel. stainless steel E04R 0.0..250.0 mbar rel. stainless steel E05R 0.0..400.0 mbar rel. stainless steel E06R 0..1000 mbar rel. stainless steel E07R 0..2500 mbar rel. stainless steel E08R 0..4000 mbar rel. stainless steel E09R 0..6000 mbar rel. stainless steel E10R 0,00..10,00 bar rel. stainless steel E11R 0.00..25.00 bar rel. stainless steel E12R 0.00..40.00 bar rel. stainless steel E13R 0.00..60.00 bar rel. stainless steel E14R 0.0..100.0 bar rel. stainless steel E15R 0.0..160.0 bar rel. stainless steel E16R 0.0..250.0 bar rel. stainless steel E17R 0.0..400.0 bar rel. stainless steel E18R 0.0..600.0 bar rel. stainless steel E19R 0..1000 bar rel. stainless steel E01A 0..1000 mbar abs. stainless steel E02A 0..2500 mbar abs. stainless steel E03A 0..4000 mbar abs. stainless steel E04A 0..6000 mbar abs. stainless steel E05A 0.00..10.00 bar abs. stainless steel E06A 0.00..16.00 bar abs. stainless steel E07A 0.00..25.00 bar abs. stainless steel 2. Connection for stainless steel sensor 1 0 no connection cable (for plastic sensors) EK01 1 connection cable (length: 1 m) EKxx 1 connection cable (length: xx m) (02..10 m length possible) Pressure sensor 2 (optionally) incl. calibration certificate 3. Pressure sensor 2 0 no 2 nd pressure sensor K01R -1.999..+2.500 mbar rel. plastic K02R -19.99..+25.00 mbar rel. plastic K03R -199.9..+350.0 mbar rel. plastic K04R -1000..+2000 mbar rel. plastic K05R -1.00..10.00 bar rel. plastic K01A 0..1300 mbar abs. plastic K02A 0..2000 mbar abs. plastic K03A 0.00..7.00 bar abs. plastic E01R -1000..+1500 mbar rel. stainless steel E02R -1000..+3000 mbar rel. stainless steel E03R 0.0..100.0 mbar rel. stainless steel E04R 0.0..250.0 mbar rel. stainless steel E05R 0.0..400.0 mbar rel. stainless steel E06R 0..1000 mbar rel. stainless steel E07R 0..2500 mbar rel. stainless steel E08R 0..4000 mbar rel. stainless steel E09R 0..6000 mbar rel. stainless steel E10R 0,00..10,00 bar rel. stainless steel E11R 0.00..25.00 bar rel. stainless steel E12R 0.00..40.00 bar rel. stainless steel E13R 0.00..60.00 bar rel. stainless steel E14R 0.0..100.0 bar rel. stainless steel E15R 0.0..160.0 bar rel. stainless steel E16R 0.0..250.0 bar rel. stainless steel E17R 0.0..400.0 bar rel. stainless steel E18R 0.0..600.0 bar rel. stainless steel E19R 0..1000 bar rel. stainless steel E01A 0..1000 mbar abs. stainless steel E02A 0..2500 mbar abs. stainless steel E03A 0..4000 mbar abs. stainless steel E04A 0..6000 mbar abs. stainless steel E05A 0.00..10.00 bar abs. stainless steel E06A 0.00..16.00 bar abs. stainless steel E07A 0.00..25.00 bar abs. stainless steel 4. Connection for stainless steel sensor 2 0 no connection cable (for plastic sensors) EK01 1 connection cable (length: 1 m) EKxx 1 connection cable (length: xx m) (02..10 m length possible) Ordering example: SL-P Set-K04R0-E11AEK02 Pressure measuring set with two sensors (1x plastic sensor, 1x stainless steel sensor with 2 m connection cable) pi-gr-_e V1.00-00 11
Measuring Set Conductivity SL-C Set Preliminary information Available in 3 rd Quarter 2012 Water-proof and impact-resistant handheld instrument Water-proof conductivity sensor Software for operating, adjusting, data read-out, etc. USB adapter and cable High-quality case Manufacturer's calibration with certificate Gratis manufacturer's calibration after 1 year with automatic reminding from our calibration laboratory Characteristics The SL-C measures the conductivity by means of an electrode. Housing and electrode are water-proof. Particular features are the high accuracy, the min/max value memory and the hold-function, low power consumption and adjustable auto-off function, the data logger function, an analog output and the large illuminated 4½-digit display. Technical data Handheld measuring device Protection class Housing Power supply Dimensions : IP65 (housing and connections) : made of impact-resistant ABS with stand incl. silicone protective cover : 2 x AAA battery (included) Handheld instrument : 160 x 86 x 37 mm (H x W x D) incl. protective cover Ordering code SL-C Set 12 pi-gr-_e V1.00-00