GRUNDFOS DATA BOOKLET MAGNA3 65-15 F 34 1x23V PN6/1 Grundfos pump 97924299 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/magna3/97924299/magna3-65-15-f.html info@lenntech.com tel. +31 152 61 9 fax. +31 152 616 289 BE > THINK > INNOVATE
Position Qty. Description 1 MAGNA3 65-15 F Product No.: On request With its unrivalled efficiency, all-encompassing range and built-in communication capabilities, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance heating and cooling systems. MAGNA3 is the ideal choice for almost any building project old or new. The pump is of the canned-rotor type, which means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The MAGNA3 is a pump with no maintenance requirements and with extremely low life cycle cost. Characteristic features AUTOADAPT FLOWADAPT and FLOWLIMIT (reduces the need for pump throttling valves) Proportional-pressure control Constant-pressure control Constant-temperature control Differential temperature control (requires an additional temperature sensor) Constant-curve duty Maximum and minimum curve duty Automatic night setback Heat energy monitor No external motor protection required Innovative clamp ring with only one screw enabling easy repositioning of the pump head Insulating shells supplied with single-head pumps for heating systems Large temperature range due to air cooled electronics Communication Wireless communication with the Grundfos GO Remote app Fieldbus communication via CIM modules Digital inputs Relay outputs Analog input Product details The MAGNA3 is a single-phase pump and characterised by the following Controller integrated in the control box Control panel with TFT display on the control box Control box prepared for optional CIM modules Built-in differential-pressure and temperature sensor Cast-iron pump housing (also available in stainless steel versions) Carbon-fibre-reinforced composite rotor can Stainless-steel bearing plate and rotor cladding Aluminium alloy stator housing Air-cooled power electronics Motor and electronic controller The MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter. Liquid: Pumped liquid: Water Liquid temperature range: -1.. 11 C Liquid temperature during operation: 6 C 1/9
Position Qty. Description Density: 983.2 kg/m³ Technical: Rated flow: 28.4 m³/h Rated head: 1.1 m TF class: 11 Approvals on nameplate: CE,VDE,EAC,CN ROHS,WEEE Materials: Pump housing: Impeller: Cast iron EN-GJL-25 ASTM A48-25B PES 3%GF Installation: Range of ambient temperature:.. 4 C Maximum operating pressure: 1 bar Flange standard: DIN Pipe connection: DN 65 Pressure rating: PN6/1 (@): 34 mm Electrical data: Power input - P1: 29.. 1377 W Mains frequency: 5 Hz Rated voltage: 1 x 23 V Maximum current consumption:.3.. 6.18 A Enclosure class (IEC 34-5): X4D Insulation class (IEC 85): F Others: Energy (EEI):.17 Net weight: 24.6 kg Gross weight: 26.8 kg Shipping volume:.57 m³ Danish VVS No.: 38954615 Swedish RSK No.: 573254 Finnish: LVI NO 4615163 Norwegian NRF no.: 942692 2/9
On request MAGNA3 65-15 F 5 Hz H [m] MAGNA3 65-15 F, Model D eta [%] 16 14 12 1 1 8 8 6 6 4 4 2 2 5 1 15 2 25 3 35 4 45 5 55 6 65 P1 [W] 1,5 1,4 1,3 1,2 1,1 1, 9 8 7 6 5 4 3 2 1 Q [m³/h] 3/9
14/19 13/145 73 133 94 185 65 119 164 312 74 386 Description Value General information: Product name: MAGNA3 65-15 F Product No: On request EAN number: On request Technical: Rated flow: 28.4 m³/h Rated head: 1.1 m Head max: 15 dm TF class: 11 H [m] 16 14 12 1 MAGNA3 65-15 F, Model D eta [%] 1 Approvals on nameplate: Model: Materials: Pump housing: CE,VDE,EAC,CN ROHS,WEEE D Cast iron EN-GJL-25 ASTM A48-25B PES 3%GF Impeller: Installation: Range of ambient temperature:.. 4 C Maximum operating pressure: 1 bar Flange standard: DIN Pipe connection: DN 65 Pressure rating: PN6/1 (@) 34 mm Liquid: Pumped liquid: Water Liquid temperature range: -1.. 11 C Liquid temperature during operation: 6 C Density: 983.2 kg/m³ Electrical data: Power input - P1: 29.. 1377 W Mains frequency: 5 Hz Rated voltage: 1 x 23 V Maximum current consumption:.3.. 6.18 A Enclosure class (IEC 34-5): X4D Insulation class (IEC 85): F Others: Energy (EEI):.17 Net weight: 24.6 kg Gross weight: 26.8 kg Shipping volume:.57 m³ Danish VVS No.: 38954615 Swedish RSK No.: 573254 Finnish: LVI NO 4615163 Norwegian NRF no.: 942692 P1 [W] 8 6 4 2 1,2 1, 1 2 3 4 5 8 6 4 2 73 133 164 133 24 34 74 94 386 312 84 14/19 Q [m³/h] 185 119 65 13/145 13/145 8 6 4 2 Example of mains-connected motor with mains switch, backup fuse and additional protection L L RCD/RCCB N N Max. 25V AC, 2A, AC1 Min. 5V DC, 2mA RELAY1 RELAY2 MAX MIN S/S NC NO C 24V NC NO C Max. IN 22mA U/I Digital inputs Relay outputs Analog input for external sensor 4/9
On request MAGNA3 65-15 F 5 Hz 185 119 65 13/145 13/145 24 34 84 14/19 73 133 164 133 74 94 386 312 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 5/9
Exploded view 251a 251d 77 28 7 7a 17 31a 219 92 31a 11 9 92 51 11b 15 1 215a 215 66a 67 49 45 18 53a 53 215a 217 531a 534 531 534a 6 6/9
Sectional drawing (TM582 for TPE2,TPE3) 5 4 3 2 1 TM582 7/9
Exploded view ( TM5726 for MGE model H/I ) 251d 251b 291 29 293 287 287a 52 277a 273b 277 252a 286 273a 273 275a 266 268 268a 289a 289 251a 288b 288 288a 252b 159e 157 158 15 156c 156 151 152 172 154 185 178 156d 187 153 188 191 156c 156b 192 159d 8/9
Parts list MAGNA3 65-15 F, Product No. On request Valid from 17.5.212 (122) Pos Description Annotation Données de classification Référence Quantité Unité - Pump housing cpl. 1 pcs 6 Pump housing 1 45 Neck ring cpl. 1 92 Clamp cpl. 1 pcs - 163 Control box 1 pcs - Control box 1 Spacer 1 7a Combi Slot Torx screw 1 159 Controlboard Leaded 1 159a Cable w/plug 1 159b Connector plug 3-pole 1 159b Connector plug 3-pole 2 159b Connector plug 4-pole 1 159c Pan washer head screw 1 159d Board 1 16 Spacer 1 163b Compression spring 4 164 Cover 1 164a Screw DELTA PT 5 273b Battery 1 51 Displayboard cpl. 1 - Control box 1 Box 1 Socket head cap screw 12 166 Powerboard, Leaded 1 166c Socket head cap screw 1 167 Cover 1 167a Pan head tapping screw 4 192 Cooling paste 163a Pan head screw 2 pcs 163d Pan head screw 1 pcs 31 Pump head 1 pcs 31b Protector 1 pcs 45 Insulation 1 pcs - 531 Sensor 1 pcs 531a Seal cap 1 534 Bracket 1 pcs 534a Pan head thread forming screw 1 pcs 9/9
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date. All information is copyright Grundfos. info@lenntech.com https://www.lenntech.com tel. +31 152 61 9 fax. +31 152 616 289