Sealed Rechargeable VRLA Batteries

Sealed Rechargeable VRLA Batteries poweronaustralia.com.au 2 435

AGM VRLA Batteries Engineered With Vision. Built With Care. The Power-Sonic Corporation has been a leading force since 197 in the supply of high quality cost effective batteries. Power-Sonic markets an extensive range of rechargeable sealed lead acid batteries worldwide. These batteries envelop a broad spectrum of electronic and industrial applications, either as the prime or standby power source. Engineers and buyers continue to insist on Power-Sonic batteries, wherever reliable and cost effective DC power is required. Power-Sonic is dedicated to continual product development to improve the performance and reliability of our product range. New batteries are constantly being introduced to meet the ever evolving needs of industry. We strive to produce batteries with superior performance characteristics and value, through advanced engineering and state-of-the art manufacturing processes, coupled with the use of premium raw materials. Providing our customers with reliable, yet economical, products is the corner stone of the Power-Sonic mission. Features Sealed/Maintenance-Free The valve regulated, spill-proof construction allows troublefree, safe operation in any position. There is no need to add electrolyte, as gases generated during overcharge are recombined in a unique oxygen cycle. Valve Regulated Design Our batteries incorporate a series of one-way low pressure valves. These self sealing valves allow the venting of any excess gasses that may be produced in the battery due to severe overcharging. Valve regulated batteries should never be recharged inside a sealed container. Design Flexibility Batteries may be used in series and/or parallel to obtain choice of voltage and capacity. Due to recent design breakthroughs, the same battery may be used in either cyclic or standby applications. Over models are available to choose from. Compact Power-Sonic batteries use state-of-the-art design, high grade materials, and a carefully controlled plate-making process to provide excellent output per cell. The high energy density results in superior power/volume and power/weight ratios. Rugged Construction The high impact resistant battery case is made of nonconductive ABS plastic to UL94-HB. This material imparts very good resistance to shock, vibration, chemicals and heat. Certain models feature flame retardant (FR) cases/ covers to UL94 V-O. Wide Operating Temperature Range Power-Sonic batteries may be discharged over a temperature range of -4 C to + C (-4 F to +14 F) and charged at temperatures ranging from -4 C to +5 C (-4 F to +122 F). Long Service Life Under normal operating conditions, four or five years of dependable service life can be expected in stand-by applications, or between 2 and 1 charge/ discharge cycles depending on the average depth of discharge. Deep Discharge Recovery Special separators, advanced plate composition, and a carefully balanced electrolyte system have greatly improved the ability to recover from excessively deep discharge. Lead Calcium Plates Heavy duty lead calcium plates provide an extra margin of performance and life in both cyclic and float applications and give unequaled recovery from deep discharge. Economical The high watt-hour per dollar value is made possible by the materials used in a sealed lead-acid battery: they are readily available and low in cost. Operation in any Orientation Our SLA batteries can be be charged & discharged in any orientation except upside down without reduction in performance or leakage of electrolyte. High Rate Discharge Low internal resistance allows discharge currents of up to ten times the battery s rated capacity. Relatively small batteries may thus be specified in applications requiring high peak currents. Long Shelf Life A low self discharge rate allows storage of fully charged batteries for extended periods of time before charging is required. Lower storage temperatures further enhance shelf life characteristics.

Battery Construction Terminals Relief valve Depending on the model, batteries come either with AMP Faston type terminals made of tin plated brass, post type terminals of the same composition with threaded nut and bolt hardware, or heavy duty flag terminals made of lead alloy. A special epoxy is used as sealing material surrounding the terminals. In case of excessive gas pressure build-up inside the battery, the relief valve will open and relieve the pressure. The one-way valve not only ensures that no air gets into the battery where the oxygen would react with the plates causing internal discharge, but also represents an important safety device in the event of excessive overcharge. Vent release pressure is between 2- psi; the seal ring material is neoprene rubber. Plates (electrodes) Power-Sonic utilizes the latest technology and equipment to cast grids from a lead-calcium alloy free of antimony. The small amount of calcium and tin in the grid alloy imparts strength to the plate and guarantees durability even in extensive cycle service. Lead dioxide paste is added to the grid to form the electrically active material. In the charged state, the negative plate paste is pure lead and that of the positive lead dioxide. Both of these are in a porous or spongy form to optimize surface area and thereby maximize capacity. The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both cyclic and float applications and give unparalleled recovery from deep discharge Separators Power-Sonic separators are made of non-woven glass fiber cloth with high heat and oxidation resistance. The material further offers superior electrolyte absorption and retaining ability, as well as excellent ion conductivity. Container & case sealing Case and lid material is ABS, high impact, resin with high resistance to chemicals and flammability. Case and cover are made of non-conductive ABS plastic to UL94-HB or UL94 V-O. Depending on the model the case sealing is ultrasonic, epoxy or heat seal. Electrolyte Immobilized dilute sulfuric acid: H2S4. Typical Applications Power Sources Back-up power Computers UPS Communications GPS equipment Marine communications Telecommunication systems Lighting Emergency lighting Exit lights Hand held lights Security Systems Burglar / Fire alarms Monitoring alarms Metal detectors Automotive Electronic memory accessories Braking / Fuel systems Recreation Fish finders Ride-on toys Electrical bicycles/scooters Portable Equipment Audio-visual devices Test and measuring equipment Consumer electronics Monitoring Equipment Fiber-optic test equipment Scientific instruments Weather instrumentation Agricultural Livestock/game feeders Containment fencing Military Aerospace Aircraft instrumentation Fire control systems Miscellaneous Invisible fences DC power lifts Floor scrubbers Laser products Robotics Advertising signs Battery Chargers Power-sonic offers a wide range of chargers suitable for batteries up to 1AH. Please refer to the Charger Selection Guide in our specification sheets for C-Series Switch Mode Chargers and Transformer Type A and F Series. Please contact our technical department for advice if you have difficulty in locating suitable models.

PS-SERIES: General Purpose Batteries Model Voltage V Capacity A.H. All data subject to change without notice. Current @ 2-hr. rate ma Length Width Height Ht. Over Terminal Weight in. mm in. mm in. mm in. mm lbs. kgs. PS-2 2. 3 1.97 5 1.34 34 3.94 1 4. 15.89.4 F1 PS-445 4 4.5 225 1.89 48 2.9 53 3.7 94 3.8 98 1.3.59 F2 PS-49 4 9. 45 4.1 12 1.73 44 3.74 95 4.2 12 2.2 1. F2 PS-41 4 1. 5 4.1 12 1.97 5 3.7 94 3.85 98 2.5 1. F1 PS-1 1.1 55 2. 51 1.5 42 2. 51 2.2 5.44.2 F1 PS-12 1.4 7 3.82 97.94 24 2. 51 2.2 5..3 F1 PS-21 2. 1 1.9 43 1.4 37 2.99 7 2.99 7.75.34 F1/ PS-28 2.9 145 2. 1.3 33 3.8 98 4. 1.3.59 F1 PS-3 3.5 175 5.28 4 1.34 34 2.35 2.5 5 1.37.2 F1 PS-32 3.5 175 2. 1.3 33 4.5 118 4.8 122 1.37.2 F1 PS-4 4.5 225 2.7 7 1.8 47 3.94 1 4.25 18 1..73 F1 Standard Terminals PS-5LS & LF 5. 25 2.4 7 2.4 7 3.94 1 4.4 118 1.8.82 F1 or SP PS-. 275 2.7 7 1.85 47 3.94 1 4.17 1 2.1.95 F1 PS-7 7. 35 5.95 151 1.34 34 3.7 94 3.94 1 2.42 1.1 F1 PS-82 9. 45 3.8 98 2.2 5 4.5 118 4.72 12 3.2 1.45 F1 PS-1 12. 5.95 151 2. 51 3.7 94 3.8 98 4.3 1.95 F1 or F2 PS-12FP. 5 4.25 18 2.8 71 5.55 141 5.55 141 4.8 2.18 FP PS-2 2. 1.18 157 3.27 83 4.92 125 4.92 125 7.1 3.22 NB1 PS-3 3. 18.25 159 3.35 85.5 15.93 17 12.1 5.49 F2 or NB1 PS-2 21. 15 12.5 3.5 19 8.5 22 8.9 228 3.93 29. T8 PS-832 8 3.2 1 5.29 4 1.42 3 2.49 3 2.7 9 1.5.75 F1 PS-128 12.8 4 3.78 9.98 25 2.44 2 n/a n/a.77.35 WL PS-1212 12 1.4 7 3.78 9 1.9 43 2.4 52 2.28 58 1.2.54 F1 PS-122 12 2.5 125 7. 178 1.38 35 2.3 2.5 5 2.1.95 F1 PS-1221S 12 2. 1 5.91 15.8 2 3.52 89 n/a n/a 1.5.8 F1/ PS-1223 12 2.3 115 7.17 182.94 24 2.4 1 2.4 1 1.7.77 PC PS-1227 12 2.9 145 3.11 79 2.2 5 3.9 99 4. 15 2.4 1.9 F1 PS-1228 12 2.8 14 5.24 3 1.3 33 3.82 97 4.9 14 2. 1.18 F1 PS-123 12 3.4 17 5.24 3 2.4 7 2.3 2. 2.9 1.32 F1 PS-1238 12 3.8 19 7.8 195 1.85 47 2.91 74 2.91 74 3.5 1.59 F1 PS-125 12 5. 25 3.54 9 2.7 7 3.98 11 4.21 17 3.5 1.59 F1 or F2 PS-12 12. 3 3.54 9 2.7 7 3.98 11 4.21 17 4. 1.81 F2 PS-127 12 7. 35 5.95 151 2.5 5 3.7 94 3.8 98 4.8 2.18 F1 or F2 PS-128 12 8.5 425 5.94 151 2.5 5 3.7 94 3.8 98. 2.72 F2 PS-129 12 8.5 425 5.95 151 2.5 5 3.7 94 3.8 98. 2.72 F2 PS-121H 12 1.5 55 5.94 151 2.5 5 4.37 111 4.1 117 7. 3.18 F2 PS-1212 12 12. 5.95 151 3.8 98 3.7 94 3.94 1 7.92 3.59 F2 PS-1214 12 14. 7 5.95 151 3.8 98 3.7 94 3.94 1 9.25 4.2 F2 PS-1218 12 18. 9 7. 181 3. 7.59 17.59 17 12. 5.72 F2 or NB2 PS-122 12 2. 1 7.14 181 3.3 77.59 17.59 17.2 5.99 NB2 PS-122 12 2..5 17.97 177 4.92 125 4.92 125 17. 7.71 F2 or NB2 PS-1228 12 28. 14.5 15 4.92 125.97 177.97 177 2.7 9.39 NB1 PS-1233 12 33. 15 7.72 19 5.14 1.22 158 7. 178 23.1 1.5 NB3 PS-1235 12 33. 175 7.72 19 5.14 1.22 158 7. 178 24.7 11.2 NB3 PS-124 12 4. 2 7.7 197.5 15.9 17.9 17 29.1.2 NB4 PS-1255 12 55. 275 9.4 23 5.45 8 8.15 27 8.98 228 3. 1.33 U PS-1275 12 75. 375 1.25 2. 18 8.15 27 8.98 228 5. 22.95 U PS-121 12 1. 5 12. 35. 18 8.15 27 8.98 228 8. 3.84 U PS-1211 12 11. 55. 33.73 171 8.35 212 8. 22 9.5 31.52 T11 PS-1214 12 14. 7.5 343.73 171 1.8 274 11.15 283 99. 44.91 T11

PG-SERIES: Power-Guard Long Life Batteries* PGFT-SERIES: Front Terminal Batteries* Model Voltage Rated Capacity Length Width Height Weight Standard Terminal 2-hr 1-hr in. mm. in. mm. in. mm. lbs.. kgs. PGFT-12V55 12. 57.1 1.91 277 4.17 1 8.74 222 1.71 28. T PGFT-12V75 12 82. 77.9 22.2 54 4.49 114 7.3 187 57.3 2. T PGFT-12V9 12 99. 93.4 2. 58 4.33 11 9.39 238.5 8.32 31. T PGFT-12V9H 12 99. 93.4 15.51 394 4.33 11 11.22 285 71.85 32. T PGFT-12V1 12 11..8 22.5 5 4.33 11 9.17 233 78.4 35. T PGFT-12V1H 12 11..8 15.51 394 4.33 11 11.22 285 7.4 34.5 T PGFT-12V125 12 7. 129.8 21.9 551 4.33 11 11.3 287 89.2 4.5 T PGFT-12V15 12 158.8 15. 21.9 551 4.33 11 11.3 287 12.3 4.4 T PGFT-12V18 12 19. 18. 22.5 5 4.9 12 11.2 28 119.2 54. T PDC-SERIES: AGM Deep Cycle Batteries Model Model Voltage Voltage Rated Capacity (A.H.) Length Width Height Ht. Over Terminal Weight 1-hr. 5-hr. 1-hr. in. mm in mm in mm in mm lbs. kgs. PG-V21 21. 18.5 12. 12.7 323 7. 178 8.98 228 9.21 234 71. 32.5 T11 PG-12V28 12 28. 25.5 18..5 17.9 177 4.92 125 4.92 125 18.5 8.4 T12 PG-12V35 12 35. 32.5 27. 7.72 19 5.1.22 158.97 177 24.5 11.1 T PG-12V42 12 42. 3. 25.2 7.7 197.5 15.9 17.14 15 32. 14.5 T PG-12V55 12 5. 47.5 33. 8.98 228 5.39 7 8.27 21 8.5 21 3. 1.4 T PG-12V75 12 75. 4.5 45..7 348.57 17 7. 178.4 14 51. 23.1 T PG-12V75T 12 75. 4.5 45. 1.24 2.1 18 8.27 21 8.51 21 55. 24.9 T PG-12V1 12 1. 87..8 12.5 3.1 18 8.27 21 8.51 21 9.5 31.5 T PG-12V11 12 11. 88.5 7.1. 33.8 173 8.35 212 8. 22 9.2 31.4 T11 PG-12V12 12 124. 1.5 74.4 1.14 41.97 177 8.8 225 8.3 211 81.5 37. T11 PG-12V14 12 144. 12.5 84..5 345.73 171 1.79 274 11.2 28 99. 44.9 T11 PG-12V15 12 153. 1.5 91.8 19.9 485.7 17 9.53 242 8.82 224.3 4.7 T11 PG-12V2 12 21. 18.5 12. 2.55 522 9.45 24 8.58 218 8.82 224 144. 5.3 T11 Standard Terminals Rated Capacity AH Length Width Height Total Height Weight Standard Terminal 2-hr 1-hr in. mm. in. mm. in. mm. in. mm. lbs. kgs. PDC-1275 12 7.5 7.2 5.94 151 2.5 5 3.72 94.5 3.94 1 5.5 2.5 F2 PDC-1285 12 8.5 8. 5.94 151 2.5 5 3.72 94.5 3.94 1. 2.7 F2 PDC-1214 12 14.. 5.9 151.5 3.92 1 3.82 97 3.98 11 9.5 4.3 F2 PDC-122 12 21. 2. 7.15 181.5 3.1 77.73 171.73 171 15.9 B (T12) PDC-122 12 28. 2..5 1.5.89 175 4.92 125 4.92 125 21 9.4 NB PDC-122H 12 2. 24..5 15 4.92 125.89 175.89 175 21 9.5 B (T12) PDC-1235 12 35. 33. 7.8 195 5.12.4 14 7.9 18 25 11.2 NB PDC-124 12 4. 38. 7.7 197.5 15.9 17.9 17 32 14.5 B (T) PDC-12 12. 55. 9.4 23 5.45 8 8.27 21 8. 22 39 17.7 U (T9) PDC-128 12 8. 75. 1.24 2.1 18 8.27 21 9. 23 5 22.7 U (T14) PDC-121 12 1 92. 12.5 3.1 18 8.27 21 8.5 21 1 27.5 U (T14) PDC-1211 12 17 1 12.99 33.81 173 8.4 215 8. 22 7 3.4 B (T) PDC-1212 12 12 115 12.99 33.81 173 8.35 212 8. 22 9 31.4 B (T11) PDC-12 12 128 12 1.14 41.97 177 8.8 225 8.8 225 83 37. B (T11) PDC-121 12 11 15 19.9 485.9 17 9.45 24 9.45 24 94 42.5 B (T11) PDC-122 12 214 2 2.55 522 9.45 24 8.58 218 8.82 224 8 2.5 B (T11) PDC-1225 12 28 25 2.55 522 1.55 28 8. 22 8.9 22 11 73. B (T11) All data subject to change without notice. * Also available in FR : UL94 V- rated

Capacity Retention Ratio (%) Performance Characteristics: PS Series Life Characteristics in Cyclic Use Life Characteristics in Stand-by Use 12 Retention Capacity (%) 1 8 4 2 Discharge Depth 1% Discharge Depth 5% Discharge Depth 3% 1. Discharge Current.2C (Final Voltage 1.7V/Cell) 2. Charge Current:.1C 3. Ambient Temperature: 2 o C to 25 o C (8 o F to 77 o F) Number of Cycles Retention Capacity (%) 1 8 4 2 Float Charging Voltage 2.25-2.3 V/Cell Ambient Temperature 2 C (8 F) Years Characteristic Discharge Curves Characteristic Discharge Curves.5.5 Battery Voltage (V). 5.5 5. 4.5 12 11 1 9.C.175C.25C.1C.5C Battery Voltage (V). 5.5 5. 4.5 12 11 1 9.C.175C.25C.1C.5C 4. 8 3C 2C 1C 1 2 3 5 1 2 3 2 3 5 1 2 3 min h Discharge Time @ 2 C (8 F) 4. 8 3C 2C 1C 1 2 3 5 1 2 3 2 3 5 1 2 3 min h Discharge Time @ C (32 F) Effect of Temperature on Capacity Self-Discharge Characteristics Percent(%) of Capacity 12 11 8 4 2.5 C.1 C.25 C.5 C 1 C 1 8 4 4 C (14 F) 3 C (8 F) 2 C (8 F) 5 C (41 F) Charging is not necessary unless 1% of capacity is required. Charging before use is necessary to recover full capacity. Charge may fail to restore full capacity. Do not let battery reach this state -4-3 -2-1 1 2 3 4 5 2 4 8 1 12 14 1 18 2 Storage Period (Months) Temperature ( C) Performance Characteristics: PG & PGFT Series Depth of Discharge vs. Number of Cycles Service Life at Various Ambient Temperatures 12 2 Capacity (%) 1 8 4 2 Discharge Depth 1% Discharge Depth 5% Discharge Depth 3% 1. Discharge Current:.2C (Final Voltage 1.7 V/cell) 2. Charge Current:.1C 3. Ambient Temperature: 2 C to 25 C (8 F to 77 F) Service Life (Years) 1 8 7 5 4 3 2 1.8.7..5.4 End of life defined as % of rated capacity 2 4 8 1 12 Number of Cycles.3.2 2 3 4 5 Temperature (C )

Performance Characteristics: PDC Series Cycle Life in Relation to Depth of Discharge Effects of Temperature on Capacity Capacity (%) 1 2 1 8 4 2 1% DOD 5% DOD Testing condition Discharging:current.17C (FV 1.7V/cell); Charging:current 2.45V/cell,max..25CA; Charging volume:125% of discharged capacity. 2 4 8 1 1 2 1 4 1 1 8 Number of Cycles 3% DOD 12.5CA.1 CA 1.2CA.5CA 8 1CA 2CA 3CA 4 2-2 -1 1 2 3 4 5 Temperature( C) Charging Cycle Applications: Limit initial current to.25c (C is the nominal amp hour capacity of the battery). Charge until battery voltage (under charge) reaches 2.45 volts per cell at 8 F (2 C). Hold at 2.45 volts per cell until current drops to approximately.1c ampere. Battery is fully charged under these conditions, and charger should either be disconnected or switched to float voltage. Float or Stand-by Service: Hold battery across constant voltage source of 2.25 to 2.3 volts per cell continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Terminal Options F1 F2 FP FASTON.187" x.32" quick disconnect tabs. FASTON.25" x.32" quick disconnect tabs FASTON POLARIZED Positive: F2, Negative: F1 WL PC TH INSULATED WIRE LEADS Molex Housing 524-2 & 523-PBT plug on PS-5 AMP Housing 1-48318- & 811-1 on PS-128 PRESSURE CONTACTS TOY BATTERY CONNECTORS H-connector PS-12 TH Application Notes Continuous over- or undercharging is the single worst enemy of a lead-acid battery. Caution should be exercised to insure that the charger is disconnected after cycle charging, or that the float voltage is set correctly. Because there is a chance of off-gassing hydrogen and oxygen if the battery is overcharged, it is important to provide adequate air circulation. Never charge or discharge a battery in a hermetically sealed enclosure. Batteries should not be stored in a discharged state (or in a hot place). If a battery is discharged for some time it may not readily take a charge. To overcome this, leave the charger connected and the battery should eventually begin to accept a charge. Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within months of storage, otherwise permanent loss of capacity might occur as a result of sulfation. To prolong shelf life without charging, store batteries at 5 F (1 C) or less. NB1 12 NB2 4.8 4.5 14 12 5. Torque: 2.~3. Nxm 2 2 T THREADED INSERT - mm STUD 1mm M T8 2mm M mm THREADED INSERT - mm STUD mm NB3 1.5 T11 THREADED INSERT - 8mm STUD F1/ 4.8 21. TS TOY BATTERY CONNECTORS S-connector PS-12 TS 7 1 2mm M8 7mm Torque: 11.~14.7 Nxm SP SPRING TERMINALS Fully collapsible positive and negative contacts U 1 17.4 19 Positive 22 18 1 15.9 17.5 Negative Torque: 11.~14.7 Nxm 22 18 8.5 9 NB4 15 7.5 18 5.5 T12 THREADED INSERT - 5mm STUD 12mm M5 mm Torque: 2.~3. Nxm

Quality is always #1 We employ IQC, PQC and ISO 91 Quality Management Systems to test materials, monitor manufacturing processes and evaluate finished products prior to shipment. All our batteries are 1% tested with advanced computer equipment prior to being released for sale. Power-Sonic management and staff are committed to providing the best possible service to satisfy our customer s needs, and fulfill our undertaking to deliver top grade products on time and at a competitive price. Our batteries are manufactured to international standards including JIS, DIN and IEC and have UL and CE certification.